M&E Technical Manager (Electrical/ Mechanical)

Working Day: 5Day | Mon – Fri 8.30am – 6pm

Location: Ang Mo Kio

Salary: $6,000 - $9,000

Requirements

• Degree / Diploma in Electrical Engineering, Mechanical Engineering or Building Services.
• Min 8-10 years’ experience in Mechanical & Electrical services.
• Good knowledge in M&E works, planning capability and authorities / statutory compliance.
• Good knowledge and experienced in Design & Build Tender for M&E services is preferred.

Job scope

• Preparation and submission of M&E tenders, including reviewing technical specifications, cost estimates and project timelines.
• Taking charge on M&E QS related matters and responsible from tender to pre-contract and post contract administration duties.
• Prepare tender clarifications, liaise with consultant, attend site visit and tender briefings/meetings.
• Responsible for interpretation of specifications, compliances, review of tender drawings for any discrepancies and any other relevant document.
• Conduct detailed technical evaluations of tender documents to ensure compliance with project requirements and industry standards.
• Identify potential risks and challenges associated with tender submissions and develop mitigation strategies.
• Plan and execute with tender team to achieve KPI.
• Suggest Value Engineering solution for MEP works, if required, in the tender.
• Assist in the presentation slide, technical write up for tender submission/interview and attendance of tender interview.
• Involve in project write up such as understanding scope of work, manpower histogram, programs and project schedule using Microsoft Project software.
• Provide technical expertise and guidance to support the decision-making process during tender evaluations.
• Evaluating quotations from sub-cons/suppliers according to tender requirement.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling

Work Location: Upper Changi Road

Contract Period: From 1 Jan 2025 to 31 Dec 2025

· Mondays,Tuesdays and Thursdays: 8.00am to 5.00pm

· Wednesdays: 8.00am to 4.30pm

· Fridays: 8.30am to 5.30pm

Job Description:

1. Administration pertaining to movements of personnel

2. Ensuring the completion of check-list for new staff joining the school & staff leaving the school/service

3. Updating Staff List

4. Updating Staff Particulars, e.g. change of address & contact no., staff achievements, courses completed, etc

5. Updating School’s Achievements, including CCA achievements

6. Handle logistics for meetings

7. Check daily incoming mails and dispatch to respective personnel

8. Administrative duties for major events such as Founder’s Day, National Day cum Partnership Day & Secondary Four Graduation Ceremony, etc

9. Designing and printing of programme booklets

10. Preparing guest book for visitors

11. Foreign Schools’ Visit to AHS

12. Designing & preparing guest book for foreign visitors

13. Preparing momento photographs for foreign visitors

14. Updating school leaders’ & school’s calendar of events

15. General filing and photocopying duties

16. Any other administrative duties assigned by P/VPs such as arranging refreshments for meetings, photography, school organizational chart and general office administrative duties.

Qualifications and Skills Required:

1. Good interpersonal skills and a collaborative team player.

2. Good communication skills and comfortable engaging stakeholders.

3. Ability to multitask with good time management.

4. Proficient in Microsoft Office

5. Able to work on Saturdays, if necessary

Maxhunt Resource Pte Ltd | EA Licence: 22C1322

Loh Wing Sheng | Registration No: R22110239

Job Description:

• Performs business administration for commercial team, such as new vendor set up, payment process, report data collection, contract management
• Coordinates the organization of internal and external events and manages the marketing and demonstration products and printed material
• Assists the team with the administration of patient support, including prescriptions, invoices and ad-hoc communications
• Supports with the management of travelling dialysis patients, outbound or inbound to Singapore
• Support office administration such as mail/document delivery, office related payment process, office maintenance and supply procurement, team office and IT supplies, etc.
• Ad-hoc administration operation assigned by line manager.

Job Requirements:

• Bachelor’s degree
• Familiar with MS Office. Good at Excel (V look-up, PivotTable)

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Job Scope:

• Process sales orders in the ERP based on the sales order received.
• Ensure that the customers’ orders are processed in time.
• Work closely with sales team to support the sales process from receiving order to delivery of goods to customers.
• Receive customers’ request, enquiries from phone calls, emails, face to face.
• Work with the operation team to provide information to address customers’ requests and enquiries.
• Gather and record customer feedbacks in CRM and provide solutions to ensure customer satisfaction.
• Prepare delivery order, tax invoice and loaner form. Liaising with courier service and in-house courier to ensure timely delivery to customers.
• Support the process of product insurance in Singapore.
• Liaise with end users and Insurance company to process the insurance purchase/claims via the insurance portal.
• Performs various administrative activities relating to processing orders, invoicing and data maintenance.
• Maintain proper documentation of the order processed for audit purposes.

Requirements:

• Possess min Diploma in Business Administration or related field
  Possess prior relevant work experience in order processing is preferred
• Comfortable to commit for 1 year basis
  

Interested candidates can write in to Ann at [email protected]

Ann Goh Xin Ting
R1875289

Recruit Express Pte Ltd
E.A License: 99C4599

Work Location: Jurong West

Working Hours: Mondays to Thursdays: 7:30am to 5:00pm, Fridays: 7:30am to 4:30pm, inclusive of 1.0 hour lunch break

Contract Period: 30 December 2024 to 29 December 2025.

Job Description

• Provide teaching and learning support to teachers, for example, preparation of resources / materials for Science laboratory activities and enrichment programme.

• Label and keep records of existing and new Science teaching and learning materials and lab resources such as teachers’ desk copies, reference books, lab apparatus and chemicals etc. Maintain loan records of Science Resources.

• Pack and organise the resources in the Science Rooms. Ensure that the Science rooms are clean and conducive for lessons.

• Ensure lab equipment, materials and specimens are in good working conditions. Conduct stock-take at least twice a year. Maintain a stock book and breakage record to initiate ordering of replacements where necessary.

• Ensure proper disposal of waste materials such as sharp waste objects and chemicals.

• Ensure safety of pupils in the Science rooms. Report any incident to Science HOD/ Level Head. Maintain a laboratory incident log book.

• Check that first aid box is updated, safety devices in the laboratory, such as emergency eye-washers, showers and fire extinguishers are working.

• Provide administrative / logistical support for Science competitions, assessments and programmes collation of survey results and distribution of Science materials to pupils etc.

• Assist in carrying out safety briefings such as Laboratory Safety, equipment awareness (e.g. Microscopes).

• Any other duties assigned by the School

Job Requirement

• Diploma in Science or its equivalent

• At least one year experience in assisting HOD-Science in the execution of daily Science Laboratory Operational and Administrative duties.

• At least one year experience of providing support for Science programmes; STEM & Sustainability projects and Laboratory-based lessons in schools.

• Experience in creating digital resources such as presentations and videos according to Science Experiential Learning Experiences using powerpoint.

• Proficient in preparation and maintenance of Laboratory equipment.

• Fluent in written and spoken English.

• Good interpersonal, communication, planning and analytical skills.

• Has experience working with primary school students in school settings.

• Able to plan and work both independently and as part of a team

• Certified with standard first aid is not necessary but will be an advantage

EA: 22C1322

EAP:24124011

Responsibilities

• Maintain existing business relationship through continuous follow up, responding to customers inquiries and resolving problems.
• Diligently supporting and reporting to team leads on day to day activities.
• Deliver presentations of products at customer sites.
• Recoup overdue payments from customers.
• Processing orders and ensuring prompt shipments to customers.
• Preparing packing list for warehouse to pack.
• Update customers on pending delivery dates and create delivery orders and invoices for deliveries to customers.
• Assisting deliveries for urgent shipments to customers. (Only if required)
• May required to travel to customers site for quarterly meeting, sales review and if any urgent is required

Job Requirements

• Preferably a diploma holder with at least 2 years’ relevant experience in office administration, sales administration or equivalent

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No. 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Working Location: Ang Mo Kio

Working Hours: 8.30am-6.15am (Mon-Fri)

Responsibilities:

• Machine servicing, installation and training
• Lapping and polishing machine operation.

Requirements:

• Exp in Precision Engineering machine operation or machinery servicing
• Knowledge of Mitsubishi or Siemens PLC is added advantages
• Singaporean Only

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to [email protected]

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion!

R22103985 | EA License 16C7883

Responsibilities

• Developing and implementing security policies, procedures, and guidelines to ensure compliance with industry standards and regulations.
• Leading the design and implementation of security controls, including firewalls, intrusion detection systems, endpoint protection, and security information and event management (SIEM) systems.
• Conducting regular security assessments and vulnerability scans to identify potential risks and vulnerabilities.
• Responding to and investigating security incidents and breaches, and implementing measures to prevent future occurrences.
• Managing and monitoring security systems and tools to detect and respond to security events and threats.
• Collaborating with other IT teams to ensure security best practices are followed during system and software development.
• Providing guidance and support to junior security operations engineers and other team members.
• Staying up-to-date with the latest security trends, threats, and technologies, and making recommendations for improvement.
• Participating in incident response and disaster recovery planning and testing.
• Collaborating with external vendors and partners to ensure the security of third-party systems and services.

Requirements

• Bachelor's degree in Computer Science, Information Systems, or related field.
• Strong technical knowledge and experience in security operations, network and systems administration, and incident response
• Experience with programming languages (Rust is a plus), Embedded Systems, Hardware peripherals.
• Familiarity with Operating System Security (e.g. Linux, Windows).
• Excellent problem-solving and analytical skills.
• 6+ years of professional experience in hardware and firmware security.
• Chinese speaking to liaise with Chinese counterparts

Benefits

• Up to 20 days Annual Leave
• Shift Allowance
• Festive Gifts
• Overtime Meal and Transport Benefits
• Employee Growth Fund
• Group Insurance
• Regular Employee Bonding Events
• Attractive Annual Variable Bonus AND Quarterly Performance Incentives

Culture

• We foster our core values through active listening, caring, and supporting continuous improvement for all our staff members
• Experience the energetic working environment with multicultural staff members with varied skills and experiences

Our Client:

• Electrical Equipment Industry
• Central Region
• 5 Days, Monday to Friday
• Up to $8,000 per month

Responsibilities:

• Lead development of new process to recycle and reuse metal scraps.
• Research and develop process of upcycling metal scraps (titanium/aluminum alloy).
• Research recycling of 3DP metal powders and reduction of raw material cost.
• Provide development plan and risk mitigation for projects to management.
• Manage collaboration projects with Institute of Higher Learning or Research Institutes on new material or new technology development.

Requirements:

• Masters / PhD in Materials Science, Metal Material Engineering or Analytical Chemistry.
• 2 years of relevant R&D working experience preferred.
• Have experience in metal material development and qualification in either mold, fixture or product.
• Possess knowledge in material characterization and metal powder production process.

For interested applicants, please click "Quick Apply”

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Quay Choon Lan Joanne (Guo Chunlan) | EA Reg No: R24121479
JTE Recruit Pte Ltd | EA Lic No: 14C7215

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

Key Responsibilities:

• As a Firmware Development Engineer at Micron, you will build groundbreaking high-performance controller firmware for volatile and non-volatile memory systems.
• You will assist in the evaluation, creation, build, bench testing, debugging, and failure analyzes of firmware for new high-performance memory controllers and Solid State Drives (SSD) that will improve performance, while reducing power, latency and SoC (System on Chip) complexity for the target sectors.
• You can expect to partner multi-disciplinary Engineers seek multi-functional product development issues.
• You will triage failures, file bug reports, and help the development teams with isolating issues.

Requirements:

• Degree in Computer Engineering/Electrical and Electronics Engineering with at least 1 to 2 years of experience as Software or Firmware Developer.
• Proficient in C Programming: Strong coding skills in C are required for firmware development.
• Experience with Embedded Software Development: Design, develop, and optimize embedded software for memory controllers.
• Skilled in using scripting languages (e.g. Python), programming tools and environments, will be beneficial.
• Experienced with NAND flash and other non-volatile storage is a distinct advantage.
• Storage Industry Knowledge: Understand the storage industry, especially SSDs, HDDs, and related technologies, will be beneficial.
• Storage Interface: Understanding of storage interfaces, such as PCIe/NVMe, is desirable.
• Flexible and adaptable to work in a multi-functional team and handle multiple priorities.
• Problem-Solving Abilities: Ability to troubleshoot and debug embedded systems.
• Collaboration and Teamwork: Work effectively in cross-functional teams to address product development challenges.
• Independent and self-motivated.

* Design, analysis and plan for Civil & Structural engineering works
* Liaise with consultants, contractors & authorities from inception to completion of projects on C&S matters
* Responsible for timely submission of plans and reports to authorities and clients
* Manage projects to meet the time, cost and quality objectivies
* Coordinate and monitor work progress at site including periodical site inspection and attending meeting
* Assists in other ad hoc duties as assigned

Requirements:

• Able to work independently with minimal guidance.
• Proficient in MS Office/Excel
• At least 3 years of local construction experience
• Knowledge in BIM / Revit software is added advantage.
• At least Diploma/ Degree in Civil & Structural engineering or equivalent recognized by the Professional Engineers Board

Fluent in English , Good project management and communication skills

• Site investigation: Conducting geological surveys and investigations to assess site conditions and identify potential risks.
• Data analysis: Analyzing geological data to inform project design and decision-making.
• Geotechnical engineering: Providing geotechnical input for project design and construction.
• Sensor selection: Selecting appropriate sensors and instrumentation for monitoring various parameters (e.g., temperature, pressure, displacement, groundwater levels).
• Installation: Overseeing the installation and calibration of monitoring equipment.
• Data acquisition: Collecting and managing monitoring data.
• Data analysis: Analyzing monitoring data to identify trends, anomalies, and potential risks.
• Reporting: Preparing regular reports on monitoring data and findings.
• Alert systems: Developing and implementing alert systems to notify stakeholders of critical events.

Requirements:

• Min Diploma/Degree in Geologist Engineering
• Strong experience in LTA/MRT Projects
• Able to work under pressure and independently.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

JOB DESCRIPTION

1. IT end-user computing devices and software requirements shall include deploying, maintaining, managing, supporting, troubleshooting, installing and configuring of notebooks / laptops, printers, desktop PCs, monitors, tablets, anti-malware software, operating systems, business software applications (MS Office, MS Office 365 applications, Adobe Acrobat and etc.), client machines network connectivity and etc

2. IT managed service requirements shall include managing IT incidences, IT service requests, IT problems, IT change requests, IT configuration and IT reporting

3. Manage and resolve customer helpdesk servers, LAN/WAN, cabling, video conferencing, backups, offsite backups, switches, firewalls and ensure 24x7 availability

4. Troubleshoot PC, gadgets, network, servers and provide solutions to resolve such failures on both immediate and long-term basis

5. Ensure Backups and Restorations are successful and properly done on a daily basis

6. Assess, review and recommend existing IT infrastructure for potential weaknesses and propose and implement solution or mitigation process

7. Monitor and trend network and system utilization and apply the information towards improving infrastructure availability, resilience and security

8. Set up VIP’s gadgets, internet, troubleshoot issues request in a timely manner and ensure that they can receive their emails on their mobile and other devices

9. Operate and manage the overall Server, Storage, Applications, Disaster Recovery and Security Infrastructure Operations at customer premises or cloud

10. Implement plans of IT measures, IT policy, IT Processes and Audit Compliance

11. Ensure continuous delivery of IT services through oversight of service level agreements with end users and monitoring of IT systems performance on day-to-day basis

12. Reviews of the existing information and systems landscape across The Group, and proactively implement infrastructure and system improvements to enhance business benefits and reduce business risks

13. Rack mounting, OS installation and PC cloning

14. Manage Software Licenses, hardware and software inventories, asset tagging and cable patching a labelling to the network ports (both at the network equipment and EUC device end)

15. Perform Vendor Management and submit monthly fix asset end-to-end

16. Other ad-hoc tasks as assigned by management

JOB QUALIFICATION

1. Minimum Diploma or Bachelor degree in Computer or IT-related field

2. Strong technical knowledge in Troubleshooting of PC, Network and Server related problems

3. Familiar with Windows Servers Active Directory domain services administration, troubleshooting, health check and fine-tuning

4. Experience in Implementing and Maintaining Backup Solutions

5. Resourceful Engineer who knows how to solve problems independently using online and offline resources

6. Good analytical and problem-solving skills

7. Able to communicate well with end-users & have strong sense of responsibility

8. Good sense of ownership to customers’ reported issues and track them through resolution and bring to closure of ticket raised

9. Liaise with product manufacturers for problem escalation and resolution

10. Good communication and Interpersonal Skills in English and Mandarin

Permanent, 5days, Paya Lebar

Our client

MNC in air conditioning and humidification system solution serving high tech industry.

Responsibilities:

· To Conduct assessments of hvac designs to ensure that they meet the required specifications and standards within allotted timeline.

· To verify and prove that hvac systems in data centre build and function according to the requirement.

· To execute, lead n manages the commissioning process across all projects, from start-up, designing, construction, acceptance, functional performance and systems testing to operational turnover.

· Management of 3rd party commissioning agents, supplier, contractor, client to resolve any issues on site

· To perform project closeout and handover

· To produce Commissioning Report for each project.

Requirements:

· Diploma in Mechanical Engineer or related disciplines.

· 3 years’ experience in hvac data centre of commissioning management or hvac data centre design management

· Proficient in data centre safety and industry standards

· 3 years’ experience in physical M&E equipment in data centre (especially hvac0

· Speaks and write 2 languages.

Please email your resume ( in word document )to [email protected].

We regret only shortlisted candidate will be notified.

Assistant Engineer, Facilities will provide assistance to the Facilities Manager in the operational activities in technical services, maintenance and operations, vendor management, finance, contracts and procurement, project management and occupancy services.

• Be familiar with & operate to the Scope of Work as defined in the Service Agreement.
• Responsible for delivery of services in accordance with client Service Level Agreement.
• Achieve key performance indicators and service level agreement targets
• Understand the operational & technical requirements of the site and ensure that current service agreement is maintained to provide necessary supplies and services.
• Responsible for site facilities operation (including Cleanroom operation). Key contact for technical issue for FM at the site
• Establish Engineering and Operational procedures and roll out for site staff
• Implement the energy management programs to reduce the cost on utilities
• Initiate a system to measure the quality of performance on a quarterly basis
• Initiate and maintain preventive maintenance program
• Responsible for early involvement in facilities operation and provide advisory service during site inspection and project development
• Solution provision for minor projects and coordinating with contractors/vendors from initiation to completion
• Manage the M&E scope of the projects to ensure the quality and deliverables within the stipulated time
• Plan and take responsibility for smooth operations of all mechanical, electrical, plumbing installations and civil works pertaining to the facility – Building and Manufacturing Facilities
• 24/7 emergency call support and site attendance as required
• Develop and implement innovation programs and processes that reduce utility costs, increase productivity and savings
• Continuous optimization of processes, tools and documentation
• Ensure alignment and compliance to established policies and standard operating procedures for the management of the client's critical environment (CEM)
• Ensure proper engineering documentation and adherence to the established change management controls for all sites
• Protect the health & safety of staff and others by adhering to and developing guidelines and strategies
• Ensure compliance with all government regulations, statutory regulations on fire, health and safety standards
• Ensure compliance with the company's programs and audit programs and participate in engineering community initiatives
• Adhere to the company's business conduct by ensuring compliance with the firm's guidelines, procedures and strategies
• Managing all contract vendors to carry out technical audits / maintenance for all installation as scheduled.
• Conduct audits to ensure that all safety procedures, including disaster recovery and business continuity plan and escalation procedures are in place and maintained
• Participates in client-initiated EHS, BCP and ERT programs
• Provide monthly operation and maintenance report to client

Sound like you? To apply, you need to be/have a:

Qualification

An ideal candidate would have a university degree or professional qualification in engineering or facilities management are welcome to apply. .

Good communicator

Do you have an excellent command of spoken and written English and Chinese language? Can you communicate technical issues to less able colleagues, clients and vendors? If you said yes to these, bring your ambition and explore our world of possibility.

Our client specializes in high-precision CNC machining and custom manufacturing. Due to business needs, they are now recruiting a Welding Process Engineer to be part of their Welding Team for ongoing transformation projects. They are located in the East - easily accessible.

Duties of Welding Process Engineer:

• Design and create welding procedures, specifications, and jig fixtures.
• Perform TIG welding and have knowledge of orbital welding (preferred).
• Introduce and implement advanced welding technologies and techniques.
• Estimate costs, resources, and timelines for welding projects.
• Train welding personnel on techniques and safety protocols.
• Maintain comprehensive records of welding procedures, inspections, and certifications.
• Develop and uphold Welding Procedure Specifications (WPS) and Procedure Qualification Records (PQR).

Requirements:

• Diploma in Mechanical Engineer
• Possess Certified Welder Inspector (CWI) is an added advantage
• 3 years of relevant experience

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

M&E Engineer

Job Description & Requirements

• Be responsible for the planning, scheduling, controlling and coordinating of mechanical and electrical works
• Monitor, track, and provide timely project progress reports to the management
• To supervise and control M&E sub-contractors to carry out their works accurately and timely and to ensure that works on site are carried out according to specifications / drawing
• Liaise and hold meetings with clients and M&E consultants on technical resolution, inspection & submission
• Evaluate costing received for M&E works
• To monitor M&E work documents and shop drawings coordination
• Able to ensure that all requirements by Clients, Consultants and relevant Authorities are adhered and established
• Review & co-ordinate subcontractors’ shop drawings and quotations in terms of mechanical and electrical compliance for calling of sub-contract works
• Submission and coordination between sub-contractor, consultants and Project Team
• Supervise and inspect all mechanical and electrical works to ensure quality of work
• To liaison with Consultants for technical clarification
• To monitor and ensure all works are carried out in accordance to approved drawing/specification and complete within schedule time
• To assist in the deployment and storage of M&E materials, plant and equipment delivered by the M&E subcontractors
• Contract administration of M&E subcontracts
• To provide support and arrange the necessary required inspections

1) Degree / Diploma in Mechanical / Electrical Engineering
2) Minimum 2-5 years of experience in Construction / Building / Engineering industry

Job Responsibilities:

·Plan, execute, monitor and assist in the installation and ongoing support and maintenance of all hardware, software and networks in project delivery

·Conduct root cause analysis & implement pro-active measures

·Responsible for supporting operational systems satisfying contractual Service Level Agreement

·Perform and manage routine preventive maintenance and operational activities promptly and effectively

·Perform troubleshooting and fault rectification

·Provide up-to-date project documentation and reports

·Diagnose and rectify technical issues

·Perform standby duties if required

Job Requirements:

·Experience in Windows server OS, Unix/Linux OS & virtualization environment (VMware, HyperV etc.)

·Strong troubleshooting skills and analytical mind with problem-solving aptitude

· Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment

·Pro-active, dynamic and with good analytical/conceptual thinking

·Able to work independently as well as in a team and good interpersonal skills

·Good Working knowledge with VPN, firewall appliances would be an advantage

·Good working knowledge with routers, switches would be an advantage

·Good working knowledge in hardware like servers, storage area networks (SAN), network-attached storage (NAS) devices

•Experience in hardening of OS, system and network equipment

•Experience in Patch Management

•Good Knowledge of IT Infra services like Active Directory, DHCP, DNS, Exchange/Mail Service, Database, Web or App Server etc.

You may submit your resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

(EA Reg No: 20C0312)

We are seeking a Tibco Integration Engineer to transition of our testing equipment communication from a legacy TIBCO EMS/MESINT/STULTINT Java-based integration to an MQTT-based interface. The role involves designing, implementing, and configuring the new messaging system, ensuring seamless communication between testing equipment and the server-side TIBCO Messaging Gateway. The position requires a strong background in messaging systems, integration architecture, and control configuration to manage equipment interactions.

Key Responsibilities:

• Replace existing Test Cell Controller (STCC)-based communication architecture with direct equipment integration using MQTT.
• Transition current TIBCO EMS/MESINT/STULTINT Java programs used on testing equipment to an MQTT interface.
• Implement the new server-side integration via TIBCO Messaging Gateway, ensuring efficient message routing.
• Design and implement a configurable system to control which equipment can call the server, maintaining robust access and security protocols.
• Customize and fine-tune MQTT message brokers to handle equipment-specific communication flows.
• Work closely with software developers, system architects, and testers to ensure the smooth migration of the messaging infrastructure.
• Coordinate with internal stakeholders to gather requirements and develop a detailed migration plan for all testing equipment.
• Ensure comprehensive testing of the new MQTT interface with all testing equipment before full rollout.
• Address any compatibility issues and ensure high performance and low latency in message delivery.
• Create detailed system documentation, including configuration details, communication flows, and troubleshooting guidelines.
• Provide ongoing support and maintenance for the new integration system, including updates and optimizations as needed.

Required Skills and Qualifications:

• Strong experience with MQTT messaging protocols and architecture.
• Proficiency with TIBCO EMS and TIBCO Messaging Gateway.
• Deep understanding of Java-based systems, particularly MESINT/STULTINT integrations.
• Proven experience in designing and configuring messaging systems for industrial or equipment-heavy environments.
• Familiarity with controlling and managing communications between equipment and server-side applications.
• Ability to communicate effectively with cross-functional teams, understanding their needs and constraints.
• Strong documentation skills for technical and non-technical audiences.
• Hands-on experience migrating legacy messaging systems to modern protocols like MQTT.
• Background in manufacturing or testing environments involving equipment control and automation.
• Experience with TIBCO Rendezvous (RV) and other messaging middleware technologies.

To apply, simply click the "Apply" button or send your updated profile to [email protected]

EA Licence No.:18S9405 / EA Reg. No.:R1330864

Percept Solutions is expanding and actively seeking talented individuals. We encourage applicants to follow Percept Solutions on LinkedIn at https://www.linkedin.com/company/percept-solutions/to stay informed about new opportunities and events.

Job Description

1. Assist Project Engineer for on-site technical and engineering matters.
2. Assist with the site inspection to ensure site works are executed based on approved drawing.
3. Assist the structural manager to coordinate the cross-construction cooperation of various construction teams and professional subcontracts. Participate into the daily project safety management.
4. Assist with upkeep site record and progress report.
5. Other duties assigned by the Project Manager.

Job Requirements

1. Candidate must majored in Civil Engineering.
2. Analytical, organized and possess strong planning skills.
3. Excellent interpersonal and time management skills.

Assistant Engineer, Facilities will provide assistance to the Facilities Manager in the operational activities in technical services, maintenance and operations, vendor management, finance, contracts and procurement, project management and occupancy services.

• Be familiar with & operate to the Scope of Work as defined in the Service Agreement.
• Responsible for delivery of services in accordance with client Service Level Agreement.
• Achieve key performance indicators and service level agreement targets
• Understand the operational & technical requirements of the site and ensure that current service agreement is maintained to provide necessary supplies and services.
• Responsible for site facilities operation (including Cleanroom operation). Key contact for technical issue for FM at the site
• Establish Engineering and Operational procedures and roll out for site staff
• Implement the energy management programs to reduce the cost on utilities
• Initiate a system to measure the quality of performance on a quarterly basis
• Initiate and maintain preventive maintenance program
• Responsible for early involvement in facilities operation and provide advisory service during site inspection and project development
• Solution provision for minor projects and coordinating with contractors/vendors from initiation to completion
• Manage the M&E scope of the projects to ensure the quality and deliverables within the stipulated time
• Plan and take responsibility for smooth operations of all mechanical, electrical, plumbing installations and civil works pertaining to the facility – Building and Manufacturing Facilities
• 24/7 emergency call support and site attendance as required
• Develop and implement innovation programs and processes that reduce utility costs, increase productivity and savings
• Continuous optimization of processes, tools and documentation
• Ensure alignment and compliance to established policies and standard operating procedures for the management of the client's critical environment (CEM)
• Ensure proper engineering documentation and adherence to the established change management controls for all sites
• Protect the health & safety of staff and others by adhering to and developing guidelines and strategies
• Ensure compliance with all government regulations, statutory regulations on fire, health and safety standards
• Ensure compliance with the company's programs and audit programs and participate in engineering community initiatives
• Adhere to the company's business conduct by ensuring compliance with the firm's guidelines, procedures and strategies
• Managing all contract vendors to carry out technical audits / maintenance for all installation as scheduled.
• Conduct audits to ensure that all safety procedures, including disaster recovery and business continuity plan and escalation procedures are in place and maintained
• Participates in client-initiated EHS, BCP and ERT programs
• Provide monthly operation and maintenance report to client

Sound like you? To apply, you need to be/have a:

Qualification

An ideal candidate would have a university degree or professional qualification in engineering or facilities management are welcome to apply. .

Good communicator

Do you have an excellent command of spoken and written English and Chinese language? Can you communicate technical issues to less able colleagues, clients and vendors? If you said yes to these, bring your ambition and explore our world of possibility.

Diploma/ Degree in Engineering (Civil/Mechanical/ Electrical) is a must.

Supervise steel Structure fabrication and installation

Familiar with renovation work

Familiar with construction site WSH rules and regulation

Preferred Building Construction Supervisor Safety (BCSS) certificate or equivalent

Willing to work hands on

Able to communicate simple english

Able to join ASAP

Singaporean/ SPR preferred

• Location: Labrador Park

• Working hours: 08:30 to 17:30 (Monday to Friday)

• Salary: Up to $6,000 (depending on experience)

Job Responsibilities:

• Conceptualisation and design of facades, preparation of drawings and structural calculations
• Delivery of technical presentations
• Coordination with clients, architects, consultants, façade contractors, suppliers and other project team members
• Supervision of construction, site inspection and training of constructors
• Preparation of technical submissions, proposals, and documentation

Job Requirements:

• Bachelor's Degree in Civil, Structural, or Mechanical Engineering or related disciplines
• 3-5 Years of experience in façade design, engineering and construction and project management
• Proficient in CAD software to create designs and solve technical issues
• Strong and diverse technical background with effective presentation skills
• Well-versed in construction trends, international design standards and building regulations
• Possess a wide network of building professionals and property developers
• Ability to multitask and work well in a team

Interested applicants, please send your resume to Charlene (R22105303) at [email protected] with the email subject header "Façade Engineer".

We regret that only shortlisted candidates will be notified. Other applications will be updated in our database for future job opportunities.

By submitting any resumes or applications to Pasona Singapore Pte Ltd, you are considered to have read and agreed to the terms of our Privacy Policy and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Please find our Privacy Policy Agreement in the below link.

http://www.pasona.com.sg/privacy.html

Thank you for your kind understanding and co-operation.

Pasona Singapore Pte Ltd

EA License No:90C4069

(Lau Rui Lin, Charlene, EA Registration No: R22105303)

Description

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Internal Code: A24115

What will you do?

• Design and implement comprehensive test plans, test cases, test data and test scripts to ensure the quality of software products.
• Collaborate with Product Owners and stakeholders to define test objectives, scope and entry/exit criteria for testing phases.
• Perform system testing (e.g., functional and performance testing).
• Develop and maintain automated test scripts and tools.
• Review and analyse test results, identify defects and anomalies and work closely with the stakeholders to resolve issues.
• Continuously improve the software testing process by identifying areas for improvement in testing practices and tools.
  

Requirements

What are we looking for?

• Strong background in Computer Science, Computer Engineering, Information Systems Management, Information Technology or related disciplines.
• At least 3 years of experience in software quality assurance testing.
• Strong knowledge of software testing methodologies, tools and processes.
• Experience with test automation tools such as Selenium or similar.
• Experience in performance testing tools such as JMeter or similar.
• Experience with programming languages such as Java, Python
• Experience in issue management and continuous integration tools such as Jenkins, JIRA, or similar.
• Familiarity with Agile development methodologies and experience working in Agile teams.
• Familiarity with cloud-based testing tools.
• Knowledge of security testing methodologies.
• Strong analytical and problem-solving skills.
• Excellent written and verbal communication skills and strong collaboration skills.
• Ability to work independently and as part of a multi-disciplinary team.
  

Benefits

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Apply for this job

Senior Project Engineer – RC Structure (Precast & In-situ)

This role will be positioned on a construction site managing fabrication of precast concrete elements, delivery from Malaysia, on site erection and in-situ topping slabs and puddle pours.

Job Responsibilities

1. Report to and assist Construction Manager (CM) on project functions included but not limited to project site coordination, logistics, risk control management etc. to meet the project(s) goals.
2. Assist CM in project planning, implementation and to coordinate all RC related construction works on the project site are in accordance to the master and detailed work program.
3. Prepare delivery schedules for precast concrete elements (columns, beams, hollow core planks), carry out weekly inspections in Johor precast factory in coordination with QAQC team, coordinate delivery and stockpiling on site of precast elements.
4. Coordinate with design team and precast factory to manage and implement and design changes/additions (block outs, embeds etc) to the precast elements.
5. Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
6. To supervise the execution of the RC construction works including but not limited to transfer of precast elements from stockpile yard to tower cranes, lifting/erection operations, coordination of topping slab and puddle pour in-situ works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract documents.
7. Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule.
8. Be responsible for any other duties that may be assigned from time to time as your superior/management deemed fit.

Job Requirements

• Bachelor Degree in Civil (or Structural) Engineering
• 6+ years experience in site work including precast and in-situ concrete work for RC structures and exposure to managing/coordinating fabrication of precast concrete.
• Strong analytical and critical thinking skills applied to planning for construction works.
• Excel spreadsheets and planning skills.
• Good negotiation, communication and subcontractor management skills.
• Resourceful, independent and able to work in a fast-paced environment.
• Additional skills in Microsoft Project and AutoCAD is advantageous.
• Drivers license is advantageous (for factory inspections).