Job Descriptions:

• Responsible for day-to-day support and administration of Data center servers, Storage, and peripherals
• Incident management, Change request fulfilment and resolution to issues.
• Install, configure, and troubleshoot new, existing platforms, including Operating systems, storage devices, server applications and data center networking devices.
• Administer Active Directory, Group Policy, DNS, DHCP, IIS and related Server Ops scope.
• Perform routine server, storage, and backup maintenance, including updates, patching and upgrades.
• Develop, build, maintain proper documentation for all server operation matters.
• Implement controls and compliance according to ISO27001 standard.
• Familiar with Mitre Attack framework and vulnerability assessment
• Collaborate and work with subsidiaries across Asia to fulfil operation workload and ad-hoc projects.
• Lead projects as requested by Management.
• Voluntarily assist when workload is high for site operation.
• Any ad hoc duties as assigned

Job Requirements:

• At least Diploma or Degree in Computer Science or related disciplines
• Requisite MCSA or MCSE certification
• Minimum 5 years or more experience as a System engineer
• Preferably with Strong knowledge on SAN, NAS, and backup
• ITIL4 Certified will be advantages
• Veeam, Dell networker experience preferred.
• Experienced with HP and Dell storage, Hyper V as well as familiar with most virtualization environments2
• Regional exposure an advantage
• Strong knowledge on networking technologies
• Good problem-solving and communication skills is preferred.

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

• Early involvement with Business Development and Toolroom team on Early Product Review

• Participate in DFM of new project development.

• Perform Tool buy-off testing and ensure that tool conform to targeted yield, cycle time and quality for smooth mass production run as well as tool function reliability.

• Define process to achieve optimal cycle time, yield and quality for all new products assigned.

• Provide support for manufacturing/molding site to ensure FIM process meets requirement of quality level.

• Ensure smooth transfer of new product to Site PE via tool transfer, setup and troubleshooting to manufacturing site.

• Take reasonable care of workplace health and safety, abide by all EHS policies and procedures

Requirements:

• Diploma/ Degree in Mechanical/Electronic Engineering

• Min 5 years of relevant experience. Candidates with more years of experiences will be considered for Project Manager.

• Knowledge and hands on experience in Engineering & Production process automation. Knowledge/experience in Plastic injection molding a plus.

• Knowledge in IATF16949 awareness is an added advantage

• Independent, good initiative and able to multi-task in fast paced environment

• Office: Joo Koon/Boon Lay | Mon – Fri (8:30am to 5:45pm)

• Monthly salary x 13 + Variable Bonus. Monthly salary will commensurate according to experiences

• Candidates who can start on short notice preferred

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

About us(About SLB)

We are a global technology company, driving energy innovation for a balanced planet.​

Together, we create amazing technology that unlocks access to energy for the benefit of all.​

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse group of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Mechanical Engineer (Design / Drilling equipment)

Roles and Responsibilities:

• Provides repair recommendations of customer equipment that are cost effective, follow the standard practices of the facility, and are in accordance with industry requirements.
• Provides engineering support to the facility, vendors, and customers during the repair process to ensure project is completed successfully
• Prepare drawings, information and documentation which meets engineering standards to enable the manufacturing group and other departments to produce and market the Company's product
• Carry out product analysis and work under the guidance of more senior Engineers to meet customers' and/or the industry's needs.
• Evaluate equipment condition and specify remanufacture.
• Work within stated procedures to ensure that design records/controls are maintained.
• Be familiar with company products, design principles, manufacturing techniques and industry standards.
• Interface with other Engineers, vendors, and customers to successfully complete repair, assembly and testing of project equipment

Qualifications and Experience:

• Bachelor of Science in Engineering, Mechanical field with minimum 1 to 3 years relevant experience
• Passionate in engineering initiatives and improvement process

Benefits:

• 5 Working Days: Monday to Friday: 8:30am to 6pm / 8:00am to 5:30pm / 9:00am to 6:30pm
• Location: Jurong East (walking distance from MRT)
• Work Life Balance

Job Responsibilities:

• Handle end-to-end work pass administration including but not limited application, renewal, issuance and cancellation of work passes for internal, external and outsourced workers timely.
• Maintain work pass administration record tracking and follow-up closely on all work pass transaction.
• Ensure the entire work pass Administration in compliance with MOM Rules & Regulations.
• Advise and monitor all pre-employment medical check-ups for new hires.
• Liaise with MOM and clients on workers or work pass matters.
• Troubleshoot and rectify application issues i.e.. rejected application.
• Daily Operations - arrange drivers for arrival of workers / medical check / courses, vaccination etc.

Additional requirements:

• Possess CEI (Basic) advantageous
• High level of initiative, meticulous and detailed oriented with strong organization skills
• Basic understanding of the prevailing MOM rules & regulations
• 1-2 years relevant experience

Responsibilities

• Identify Sales opportunities and achieve Orders and Revenue targets
• Cultivate relationships with strategic customers, partners, and inter-departments
• Organize customers’ visits, events and conduct Corporate presentations
• Develop and manage distribution channels and including new leads
• Qualify and present to prospects, sales negotiations
• Develop and execute action plans with internal department PICs
• Co-ordinate Pre-Sales activities and Post-Sales follow-up
• Support marketing activities such as e-commerce, exhibition, brochures
• Support proposals and quotation submission to customers’ RFQs, RFIs
• Others related to Marketing activities & able to handle project as team leads PIC

Requirements

• Diploma/Degree in Marketing, Business Administration, Engineering or related disciplines
• At least 2 years of sales & marketing experience, prefer candidate with Stamping house manufacturing/plastic & metal injection molding or surface finishing industry background
• Strong communication skills with customer and internal department focus
• Result oriented, motivated, resourceful and able to work independently
• Possess high sense of responsibilities & teamwork spirit; confidence & willingness to work efficiently under pressure
• Possess a valid Singapore class 3 driving license
• Able to travel to South East Asia and willing to attend seminar which related to surface finishing including local

Shift Type / Work Hours

• Normal Shift (5 days work week)
• 7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance coverage.
3. In-house canteen at subsidized prices.

Please visit our corporate website for more information on Seiko Epson Corporation

Career Highlights:

• Good career advancement opportunities
• Competitive compensation benefits
• Company’s transport available.

Job Description:

• Provide technical support for JD Edwards EnterpriseOne applications, troubleshooting issues and ensuring system availability and performance.
• Collaborate with cross-functional teams to analyze, configure, and implement system enhancements and upgrades.
• Conduct regular system maintenance, including patching, updates, and monitoring system health.
• Offer end-user training and create documentation to facilitate efficient use of JDE applications.
• Respond promptly to user queries, identifying root causes and implementing solutions in a timely manner.
• Participate in the development and execution of test plans for system changes and enhancements.
• Maintain compliance with security standards, ensuring data integrity and confidentiality within the JDE environment.
• Proactively identify opportunities to streamline processes and optimize system performance.

Job Requirements:

• BSc Computer science or similar
• At least 3 years of working experience in providing applications/system support for JD Edwards.
• Working hours: 5 days (Mon-Fri: 8am to 5.30pm)

Job Description & Requirements

Job Description

• In charge of drive test/walk test route preparation following test requirement.

• In charge to conduct drive test/walk test (field measurement) following test cases defined by planning / optimization engineer, and provide correct and valid log file.

• In charge to collect necessary such as radio environment photo and blocking evidence.

• proposed to choose Level 1 experience engineer and include DT/log file analysis as well, DT analysis is hard for the Optimization Engineer to handle alone, DT team can provide the initial findings, while the Optimization Engineer and Senior RF engineer will provide the in depth analysis and proposal

• Have a Good Knowledge with related tools like TEMS/Nemo/Xcal/Gnex.

• Have a Good Knowledge related the Technology such as 2G/3G/4G. Will be added Value if understand 5G Technology

*

Working days: 5,5 days per week

Shift days & hours will be randomly choose when the coordinator make week-schedule, the shift time will be:

Weekdays: Monday – Friday

Day shift: 09.00 – 18.00

Night shift: 18.00 – 09.00

Weekend: Saturday

Day shift: 09.00 – 14.00

Night shift: 21.00 – 02.00

The candidates should be ready and willing to take Work on Height certification

Posted Job Advert

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

The role will lead the timely and successful transfer of the purification stages of the customer’s manufacturing process(es) into the Lonza Singapore production facility. Role will lead the preparation, execution and post-campaign activities for purification stages of the customer’s manufacturing processes at Lonza Singapore production facility. And also lead investigations into process trends to support process monitoring requirements.

Key responsibilities:

• Technology Transfer: Lead the timely and successful transfer of the cell culture stages of the customer’s manufacturing process(es) into the Lonza Singapore production facility. Work with other MSAT team members, technical experts from Lonza’s customer companies and with Lonza Manufacturing (MFG), Quality Assurance (QA), Quality Control (QC), and other departments on the technology transfer.
• Process Support: Lead the preparation, execution and post-campaign activities for cell culture stages of the customer’s manufacturing processes at Lonza Singapore production facility. Become proficient with all processes in the facility and develop ability to support/lead activities for multiple cell lines. Monitor processes on a regular basis to further understanding of process behavior and prospectively identify process issues. Develop ability to generalize issues across cell lines.
• Write change requests and drive to implementation as needed.
• Review cell culture process manufacturing batch records and provide supervision to Manufacturing technical document writing specialists on cell line specific aspects of batch records.
• Identify training needs and design and prepare a variety of training materials for MFG operators on cell culture process batch records. Work with MFG to update process records to enable robust manufacturing operations.
• Support plant start-up and pilot/commercial runs and perform technical investigations and help author technical reports to support close-out of deviations, trouble-shoot process excursions/issues for purification operations.
• Actively engage customer technical experts as necessary to progress technology transfer or process support activities.
• Perform/support experiments in the MSAT small-scale process lab to support process technology transfer or investigations. Follow all applicable lab safety policies.
• Keep current appropriate databases with MFG cell culture process data and analyze to monitor run to run consistency of operations.
• Support inspections and audits by customer and regulatory authorities as required.
• Any other duties as assigned by your Supervisor/Manager.

Key requirements:

• Degree in chemical engineering, biochemical engineering, biochemistry/ chemistry/microbiology or related discipline.
• Extensive work experience in Biotechnology process development, process support, research or a related manufacturing environment.
• Prior hands-on experience in purification experimental technique and equipment.
• Knowledge of Excel as well as Statistical Data Analysis tools.
• Excellent communication skills, outstanding action orientation, and ability to work well in a cross-functional technical environment.
• Excellent technical writing skills, ability to provide attention to detail is essential.
• Demonstrated track record in completing projects under tight timelines.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

· Drafting profiles of metal works according to project requirements;

· Drafting detailed drawings to the appropriate scale for production purposes;

· Shop drawing for projects;

· Submission to authorities and follow up on the feedback;

· Visiting construction sites for work rectification, quantity takings and follow ups;

· Prepare quotations, compute and determine quantities of works required for project;

· Programming of profiles for metal works (on-the-job training provided);

· Coordinating with external parties on the project related matter;

· Provide support to site coordinators, production supervisors and directors in management, development and implementation of projects;

Job Description

What you will do:

• Support and complement the engineering team and sales team in the process design related to refrigeration systems and gas compression systems inclusive of compressor selections with Frick Screw compressors, York multi-wheel centrifugal compressors, and other compressors or chillers for the projects. This includes vessel and heat exchanger design using HYSYS and HTRI software and optimal to have AutoCad 2D experience for P&IDs and PFDs.
• Assume responsibility in providing engineering support for the design of refrigeration systems and gas compression systems for sales and projects, attend HAZOP meetings, and assist the sale and project teams at customer meetings.

How you will do it:

• Design refrigeration systems for various applications and perform a heat balance.
• Prepare P&ID diagrams, equipment layout/piping layout for refrigeration system.
• Size refrigeration equipment such as pressure vessel, heat exchangers, valve and controls
• Able to read and understand project/technical specification and comply to require specification.
• Specify temperature, pressure and differential transmitters, and flow meters along with the instrument engineer.
• Design refrigeration system for cold rooms/chilled water system/glycol system
• Work with different vendors on the selection of third-party equipment
• Able to hold technical discussions with vendors, sub-contractors and customers.
• Frequent site visits to ensure the refrigeration systems are integrated and installed in accordance to original design and provide effective solution for any impromptu design changes.
• Meet or improve the committed submission schedule of engineering documents, and complete assigned tasks within the time frame given, with minimal supervision.

What we look for:

• Diploma / Degree in Chemical Engineering, or equivalent.
• Proficiency in AutoCAD is a must.
• Familiarity with international engineering codes such as ASHAERE/API/ IIAR/ ASME etc
• Minimum 5 years relevant experience, preferably in refrigeration, chemical process, oil and gas (onshore and offshore), food and beverage, or similar industry.
• Experience in engineering software - HYSYS/ HTRI is a plus.
• Knowledge in API is a plus.
• Experience in working with site contractors and vendors on the successful implementation of the refrigeration system design at site.
• Team player, effective communicator, able to build customer relationship and customer satisfaction.
• Able to work independently and have a strong sense of responsibility.

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

A Research Engineer to support the research for developing perception algorithms based on 4D radar. A Research Engineer position is available in the area of sensors perception and platform design in a project that involves simultaneous localization and mapping (SLAM) algorithms and deep learning object detection.

The successful candidate will work with Prof. Danwei Wang and a group of Research Fellows, Research Associates, and Ph.D./Masters/Bachelors students in the school of EEE at Nanyang Technological University, Singapore.

Key Responsibilities:

• Perform research, development, implementation, and experimentation of the perception algorithms based on 4D radar
• Solve problems of robust perception in rainy weathers and expand the usage of the technologies to other weather conditions such as fog and smoke
• Utilize expertise in deep learning, simultaneous localization and mapping to contribute to research activities
• Responsible for algorithms design and implementation
• Conduct place recognition based on 3D and 4D radar fusion
• Develop 4D radar SLAM algorithm
• Collaborate with interdisciplinary teams to integrate radar-based perception into larger systems
• Other engineering support on hardware and software

Job Requirements:

• A Bachelor/Master degree in automatic control, robotics, electrical engineering, etc
• Strong skills in C++, Python, Linux, and experience with ROS, and code management tools (git)
• Experience with algorithms based on different sensors (4D radar, 3D LiDAR, rgb cameras, thermal cameras, etc)
• Familiar with deep learning frameworks (such as Pytorch)
• Experience with deep learning based object detection
• Experience with SLAM and multi-sensor fusion algorithms
• Experience with place recognition based on sensors fusion

Preference will be given to applicants with the following additional skills:

• Has experience in multi-sensor perception and SLAM algorithms.
• Has experience in Lidar, cameras, radar, etc.
• Has experience in projects related to autonomous systems or robotics.

We regret that only shortlisted candidates will be notified.

Resident Technical Officer

Roles & Responsibilities:

• You are to carry out construction supervision of construction works as required under the BCA regulations
• You are to ensure that the design documentation is safely & accurately implemented on site
• You are responsible for the co-ordination of work on site and ensure construction safety
• You will undertake any other related duties as instructed by the Project Managers

Requirements

• Diploma/Degree in Civil Engineering or equivalent from Singapore or other tertiary institutions
• National Certificate on Construction Supervision from BCA or equivalent preferred
• Possess at least 10 years of construction site experience
• Registered as Resident Technical Officer accredited by IES/ACES
• Proficient in MS Word and Excel
• Proficient in Primavera Project Planning Tool
• Familiar in Primavera Project Planning Tool
• Familiar with local codes & regulations
• Good communications and interpersonal skills

Interested applicants are invited to submit your updated resume, stating current/expected salaries to: [email protected]

We regret to inform that only short-listed candidates will be notified.

Responsibilities:

• To prepare engineering documents for approval submission.
• Review comments and make revision if necessary.
• To issue final specification/ BOM for purchase order and issue of PR.
• Negotiate with vendors on terms and condition of purchase.
• To liaise with vendors/ subcontractors for the timely delivery of goods and fabricated or installation
• To coordinate with subcontractors and internal supervisors and contract team for the site installation, testing and construction activities.
• To liaise with the customer and consultant on their engineering request. To attend technical meeting to help resolve technical issues.
• To supervise the Draft person in the production of drawings.
• To actively involved in safety activities, prepare Risk Assessment, Method Statements, Permit to Work to ensure site activities work can conduct in a safely and timely manner.
• To prepare O&M manual for the project.
• To prepare micro schedule and follow through in order to control and ensure timely completion of construction activities.
• Able to work and travel on oversea assignment for short duration.
• Any other task as designated by the management

Requirements:

• Diploma / Degree in Mechanical/Civil/Chemical or equivalent
• Experience in the following disciplines of the fabrication and installation of steel structure works, Stainless steel piping and Square and round Ducting works related.
• Experience to work with heavy lifting equipment and also the preparation of methods statement and also risk assessment

Job Responsibilities

• Leading a Team of Mechanical Design Engineers to execute the Mechanical Design Engineering of the Project which includes preparation of RFQ, Specifications, Mechanical Data Sheet for
• Centrifugal Pumps, PD Pumps, Submersible pumps, Marine Loading Arm, Oil / Water Separator,
• Gangway, Jib Crane, Fire Fighting Equipment, Mixers, Gas Dehydration Package, Air
• Compressor and Dryer Package, Nitrogen Generation Package, Chemical Injection Package,
• Process Filters, Vessels etc. meeting Process Requirement, Client Specifications, Project
• Requirements and all applicable Project Documents to enable Vendors to accurately bid for the supply of Equipment.
• Review & Checking of Mechanical Documents such as RFQ, Specifications, Mechanical DataSheet and Technical Bid Evaluation for Mechanical Equipment to ensure compliance to applicable Codes & Standards and Project Requirements
• Review of Vendor Quotation, Evaluation & Preparation of Technical Bid Evaluation for
• Mechanical Equipment
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/approvals / resolution of open issues
• Review and Ensures that all works are carried out in accordance with project specification.
• Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Supporting Procurement Team for purchase of Mechanical Equipment
• Review of Vendor Documents post order of all the Mechanical Equipment to ensure compliance to RFQ and other Discipline requirements.
• Co-ordination with construction and commissioning team in resolving site issues.
• Vendor Co-ordination & Procurement Assistance
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Participates in discipline and inter-discipline design check and screening meetings for
• compatibility, completeness and correctness in works
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Participate in Bid Clarification Meeting, Kick Off Meeting, Pre-inspection Meeting, Factory Acceptance Test, Site Acceptance Test etc.
• Vendor Shop visit for Work Progress
• Support Construction Team and Commissioning Team for the successful installation and commissioning of the Mechanical Equipment
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.
• Any other ad hoc tasks

Requirements

• Preferably Bachelor’s / Master’s Degree in Mechanical Engineering
• Preferably 10 - 15 years of experiences in Oil and Gas industry Software Requirements
• Good proficiency in MS Excel, MS word, MS Power Point

Code Knowledge

• API 610, API 676, API 682
• ASME Section VIII
• NFPA 20, NFPA 10, NFPA 16
• OCIMF

Job Description:

• Liaise with main contractor on work progress and resolve any daily operational matters.
• Responsible in planning and preparing weekly/monthly report on the progress of work.
• Coordinate with various departments to ensure smooth operation of work.
• Handling required documentation for clients submission.
• Provide techinical support to clients
• Other related duties as assigned.

Job Requirements:

• Certificate in Engineering is preferred
• Minimum 2 years of Project Management knowledge, skills, experience.
• With autocad skill is advantage.
• Good interpersonal and communication skill
• Good organization skill
• Able to multitask
• Able to work under fast paced environment.

Responsibilities:

• Assisting with maintenance & operational responsibility for day-to-day health including Storage, Server, and backup services.
• Performing daily operational procedures, on the facilities including routine check of the facilities.
• Tape change management, operation and support.
• 24x7 monitoring of all operational systems & network components, responsible for event detection & escalation
• Diploma in IT or Computer and related fields with at least 5 years of related experiences
• Must be willing to do 12 hours shift work (Day and Night rotating)
• Must be willing to be on 24x7 standby (on rotation basis)

Job Description:

- Assist Centre Head and supervise a team of technicians in delivering technical advices/support to the various business units

- Actively involved in job estimation and WIP (Work-In-Progress) tracking

Interpret circuitry diagrams and PCBs for any re-engineering work required

- Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems

- Manage and supervise the maintenance, repair and overhual (MRO) tasks allocated to the section in supporting commercial products, proprietary and non-proprietary defence products

- Deliver allocated and ad-hoc tasks within stipulated timeline and cost

- Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost

- Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches,studies and make necessary recommendations

- Submit investigation reports to relevant authority for approval

- Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained

- Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components

- Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible

- Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts

- Perform other related duties as assigned

Job Requirements:

- Bachelor in Engineering (Electrical & Electronics)

- Experience in PCB and schematic design work

- Experience in effectively leading a team of Technicians

- Experience in SAP System, Automotive or Military Land System is advantageous

- Strong fundamental knowledge in Digital and Analog Electronics

- Knowledge in Microcontrollers, FPGAs and CPLDs

- Ability to read and interpret schematics and datasheets

- Strong technical skills in troubleshooting PCBs

Capable to use electronic tools such as multimeter, oscilloscope, digital analyser, function generator, etc

- Possess strength to comprehend, analyse and present facts and figures

- Ability to embrace challenges and apply critical thinking to resolve arising / urgent matters without losing overall business focus

- Good analytical and problem solving skills

- Good communication skills and a strong team player

- Able to work under pressure and tight timeline

Independent, highly motivated, meticulous, resourceful and possess a positive attitude

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Prepare, develop and manage (monitor & track) construction schedule for project
• Collaborate with other disciplines to collate/provide scheduling data — subcontract change requests, bid comparisons, new work item estimates and resolution of potential schedule/work problems
• Interface and work closely with clients, project team and sub-contractors to ensure required progress
• Liaise with managers and engineers to discuss the progress of the project and address any issues that may arise
• Liaise with external contractors and suppliers to organize the phases of the construction development
• Prepare cost estimations and detailed man-hour calculations
• Update resources availability and construction sequences
• Monitor and track/record work delay/progress and prepare scheduling reports
• Analyze gaps between the planned and actual progress and highlight the areas of concern to project management
• Other instructions by management and any other duties to be assigned from time to time

Pre-requisites:

• Diploma/ Degree in Mechanical Engineering
• Minimum 5 years of experience in similar role for power plant / industrial plant projects
• Proficient in MS Project and/or Primavera
• Experience in EPC power plant projects
• Independent and able to communicate effectively at all levels with other disciplines and clients
• Good time management and planning
• Good organizational skills and methodological approach
• Strong attention to details
• Willing to work in construction site conditions

What you will do:

As Green Building Engineer, you will:

• Secure Energy Consultancy and Green Mark salesas per forecast with the specified minimum margin requirement.
• Provide professional consultancy services and coordinate with authority for the Green Mark certification and project development.
• Work closely with Services Sales and Operation Team for the development of energy retrofit proposal.
• Coordinate with Instrumentation team and subcontractor for the energy audit and measurement on site.

How you will do it:

• Work with owner to influence specifications and promote Johnson Controls energy efficiency capabilities.
• Conduct energy audit and analyze building energy consumption to determine level of potential for saving energy and prepare energy saving proposals for the Green Mark building.
• Identify & make recommendations for energy conservation measures and propose comprehensive technical energy improvements and services.
• Maintain existing customers and continue to develop new customers.
• Conduct market survey, make marketing and sales presentation to owners as required. Coordinate with the Service Department for maximum results.
• Provide Green Mark Consultancy to customer. This will include to identify the gap/shortfalls and provide recommendations to customer so as the building is able to meet the prevailing BCA Green Mark requirements.
• To satisfy customers and maintain a high level of consultancy service quality for customers.
• Secure orders, write out plan margin and work with operations team for commitment.
• Maintain a record of all jobs tendered or quoted. Furnish the weekly updated list to respective manager.
• Provide weekly activities report to the Green Building Manager as and when requested.
• Plan and strategize energy efficiency service marketing and sales and work closely with Retrofit sales and Service Operation teams.
• Provide consultancy services and assessment with client and authority to achieve Green Mark certification.
• Perform any other duties from time to time, whether ad-hoc or otherwise, as assigned by your superior or management.

What we look for:

• Diploma / Degree in Engineering/Energy/Building Service related or equivalent. GMM, GMP or SCEM certification is a plus,
• Fresh graduate is welcomed to apply. However, preferably to have at least minimum 1 year of working experience related to building Mechanical & Electrical (M&E), Green Mark or Energy projects.
• Knowledge of Microsoft office, Energy Modeling software a plus
• Experience & knowledge in building mechanical & electrical (M&E) design or project is a plus.
• Experience in working with customers, consultants, sub-contractors.
• Ability to work irregular hours and under pressure when required.
• Team player, effective communicator, able to build customer relationship and customer satisfaction.
• Able to work independently and have a strong sense of responsibility.

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

• Looking for candidates with a minimum of 10 years of overall experience.
• Hands-on experience with Hadoop clusters using major distributions such as IBM BigInsights, Hortonworks, and Cloudera.
• In-depth understanding of Spark architecture, including Spark Core, Spark SQL, Spark RDD, and DataFrames.
• Experience in transferring data from RDBMS to HDFS and Hive tables using Sqoop.
• Experience in the design, development, and implementation of ETL application development projects for transforming data to/from data warehouses and data marts.

Responsibilities

• Identify Sales opportunities and achieve Orders and Revenue targets
• Cultivate relationships with strategic customers, partners, and inter-departments
• Organize customers’ visits, events and conduct Corporate presentations
• Develop and manage distribution channels and including new leads
• Qualify and present to prospects, sales negotiations
• Develop and execute action plans with internal department PICs
• Co-ordinate Pre-Sales activities and Post-Sales follow-up
• Support marketing activities such as e-commerce, exhibition, brochures
• Support proposals and quotation submission to customers’ RFQs, RFIs
• Others related to Marketing activities & able to handle project as team leads PIC

Requirements

• Diploma/Degree in Marketing, Business Administration, Engineering or related disciplines
• At least 2 years of sales & marketing experience, prefer candidate with Stamping house manufacturing/plastic & metal injection molding or surface finishing industry background
• Strong communication skills with customer and internal department focus
• Result oriented, motivated, resourceful and able to work independently
• Possess high sense of responsibilities & teamwork spirit; confidence & willingness to work efficiently under pressure
• Possess a valid Singapore class 3 driving license
• Able to travel to South East Asia and willing to attend seminar which related to surface finishing including local

Shift Type / Work Hours

• Normal Shift (5 days work week)
• 7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance coverage.
3. In-house canteen at subsidized prices.

Please visit our corporate website for more information on Seiko Epson Corporation

• Looking for candidates with a minimum of 10 years of overall experience.
• Hands-on experience with Hadoop clusters using major distributions such as IBM BigInsights, Hortonworks, and Cloudera.
• In-depth understanding of Spark architecture, including Spark Core, Spark SQL, Spark RDD, and DataFrames.
• Experience in transferring data from RDBMS to HDFS and Hive tables using Sqoop.
• Experience in the design, development, and implementation of ETL application development projects for transforming data to/from data warehouses and data marts.

Responsibilities:

• Provide network support to end users, manage incidents, problems and change requests
• Proactively monitor network performance, ensuring high network availability and smooth operations
• 24x7 monitoring of all operational systems & network components, responsible for event detection & escalation
• Diploma in IT or Computer and related fields with at least 3 years of related experiences
• 12 hours shift work and 24x7 standby is required for this role

Job Responsibilities:

• Provide Level 2 support to all IT hardware and Network related matters
• Ad-hoc projects assignment and fulfillment
• Review and improve processes pertaining to Infrastructure related services
• Develop and build quality Service document and procedures
• Enhance and establish Knowledge Management with ITIL as framework
• Handle and coordinate IT system procurement
• Assist in Annual Maintenance of Data center
• System Deployment
• Assist in Data backup and restoration
• Coordinate with vendor on network/hardware/software related matters
• System/network troubleshooting and rectification
• Assist in Annual system Audit
• Asset management
• Any Ad-hoc duties as assigned

Job Requirement:

• Minimum Diploma in related fields
• At least 3 to 7 years of relevant work experiences
• Ability to communicate with people of various levels
• Knowledge in MS office, Printers, MFP, MS Operating systems, Active Directory
• Requires Networking knowledges
• Microsoft certification will be added advantage
• Hands on and a team player
• Strong Problem solving skills.

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

• Looking for candidates with a minimum of 10 years of overall experience.
• Hands-on experience with Hadoop clusters using major distributions such as IBM BigInsights, Hortonworks, and Cloudera.
• In-depth understanding of Spark architecture, including Spark Core, Spark SQL, Spark RDD, and DataFrames.
• Experience in transferring data from RDBMS to HDFS and Hive tables using Sqoop.
• Experience in the design, development, and implementation of ETL application development projects for transforming data to/from data warehouses and data marts.