Total 17 automation engineer job vacancies in Singapore

JOB SCOPE & JOB RESPONSIBITIES

• Prepare submission and approval of documentation
• Prepare RFQ, evaluate and recommend purchases
• Coordinate with Customer, Consultant and Inter-department
• Tracking progress and prepare reports

JOB REQUIREMENT

• Degree with Mechanical / Electrical / Chemical / Environmental

PROJECT OVERVIEW

1. Provide specialized expertise in lifting operations and equipment for construction projects.
2. Ensure compliance with safety standards, regulations, and project requirements.
3. Ensure compliance with project specification and client standards, regulations and requirements.

JOB SCOPE & JOB RESPONSIBILITIES

• Detailed lifting plans and procedures.
• Documentation of equipment inspections and certifications.
• Incident reports and corrective action plans, if applicable.

(i) Planning and Design

• Develop lifting plans based on project specifications and site conditions.
• Perform site surveys to assess lifting requirements and constraints.
• Design rigging arrangements and select appropriate lifting equipment.

(ii) Execution and Supervision

• Supervise and coordinate lifting activities on-site.
• Ensure equipment is operated safely and efficiently.
• Conduct toolbox talks and safety briefings for lifting operations.

(iii) Technical Expertise

• Review engineering drawings and specifications related to lifting.
• Provide technical advice on rigging methods and equipment selection.
• Address technical queries and troubleshoot issues during operations.

(iv) Quality Assurance / Quality Control (QA/QC)

• Implement QA/QC procedures to verify compliance with lifting plans.
• Conduct inspections of lifting equipment and documentation.
• Maintain records of inpections and certifications.

(v) Risk Management

• Identify potential hazards and develop risk assessment strategies.
• Monitor weather conditions and other factors affecting lifting operations.
• Implement mitigation measures to minimize risks to personnel and property.

(vi) Client Relations

• Communicate with project stakeholders regarding lifting requirements and progress.
• Provide regular updates on lifting activities and milestones.
• Address client concerns and ensure customer satisfaction.

JOB REQUIREMENT

• Bachelor's degree in Mechanical Engineering or related field.
• Certification as a Lifting Engineer.
• 5 years of experience in lifting operations, preferably in construction or heavy industries.
• Strong knowledge of lifting equipment, rigging techniques, and safety standards.
• Any others task as assigned from time to time
• Working location: Tuas
• Working days: 5.5 days

Job description:

• Responsible to develop and review electrical design plans, specifications, and construction documents for the project.
• Provide technical guidance and oversight to the electrical design team, ensuring that electrical systems are designed and installed according to project standards and codes.
• Collaborate with architects, structural engineers, and other stakeholders to ensure that electrical systems are integrated correctly into the building design.
• Review shop drawings, submittals, and RFIs related to electrical systems and equipment and provide timely feedback to the design team.
• Conduct site visits and inspections to ensure that electrical systems are installed correctly and according to the design plans and specifications.
• Manage the commissioning and start-up of electrical systems and equipment, including testing and troubleshooting.
• Provide technical support to the construction team, including addressing technical issues, resolving conflicts, and managing change orders related to electrical systems.
• Review engineering designs and calculations to ensure compliance with all relevant codes, standards, and regulations.
• Any other duties as assigned from time to time.

Job requirement:

• Bachelor's degree in electrical engineering or a related field is required.
• At least 8 years of experience in electrical engineering, with a focus on construction projects. Candidate with less experience will be considered for a junior role.
• In-depth knowledge of electrical systems, including power distribution, lighting, fire alarm, and other related system.
• Strong technical skills, including proficiency in computer-aided design (CAD) software and other relevant tools.
• Excellent communication, organizational, and problem-solving skills.
• Ability to work collaboratively with diverse teams and stakeholders.
• Knowledge of industry codes and standards related to electrical systems.
• Sound knowledge of key Health and Safety issues and legislation.

JOB SCOPE & JOB RESPONSIBITIES

• Prepare submission and approval of documentation
• Prepare RFQ, evaluate and recommend purchases
• Coordinate with Customer, Consultant and Inter-department
• Tracking progress and prepare reports

JOB REQUIREMENT

• Degree with Mechanical / Electrical / Chemical / Environmental

JOB SCOPE & JOB RESPONSIBILITIES

• Experience in an engineering, procurement and operations.
• Ability to analyze bills of material and drawings to understand key requirements.
• Knowledge and direct experience in negotiating contracts and quotations with Contract Manufacturers and Suppliers.
• Ability to identify cost reduction opportunities.
• Responsible for procurement, sourcing and negotiation.
• Any duties as assigned by supervisor from time to time.

JOB REQUIREMENT

• Diploma or Bachelor degree in engineering.
• At least 3 years experience in procurement engineering.
• Good procurement knowledge is a must.
• Possess good analytical skills, resourceful and independent.
• Team player
• Effective verbal & written communication skills.

Job description:

• Responsible to develop and review electrical design plans, specifications, and construction documents for the project.
• Provide technical guidance and oversight to the electrical design team, ensuring that electrical systems are designed and installed according to project standards and codes.
• Collaborate with architects, structural engineers, and other stakeholders to ensure that electrical systems are integrated correctly into the building design.
• Review shop drawings, submittals, and RFIs related to electrical systems and equipment and provide timely feedback to the design team.
• Conduct site visits and inspections to ensure that electrical systems are installed correctly and according to the design plans and specifications.
• Manage the commissioning and start-up of electrical systems and equipment, including testing and troubleshooting.
• Provide technical support to the construction team, including addressing technical issues, resolving conflicts, and managing change orders related to electrical systems.
• Review engineering designs and calculations to ensure compliance with all relevant codes, standards, and regulations.
• Any other duties as assigned from time to time.

Job requirement:

• Bachelor's degree in electrical engineering or a related field is required.
• At least 8 years of experience in electrical engineering, with a focus on construction projects. Candidate with less experience will be considered for a junior role.
• In-depth knowledge of electrical systems, including power distribution, lighting, fire alarm, and other related system.
• Strong technical skills, including proficiency in computer-aided design (CAD) software and other relevant tools.
• Excellent communication, organizational, and problem-solving skills.
• Ability to work collaboratively with diverse teams and stakeholders.
• Knowledge of industry codes and standards related to electrical systems.
• Sound knowledge of key Health and Safety issues and legislation.

Job description:

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorised inspector to ensure project requirement are fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that qulity records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to contorl product and process quality.
• Compile Manufacturing Data Report (MDR).

Job requirement:

• Diploma/Degree in Engineering with 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Willing to work at vendor location or site.
• Proficient with Microsoft Office such as Word and Excel.
• Experiences in wastewater, desalination, water utility package is preferred.

JOB SCOPE & JOB RESPONSIBILITIES

• Design for single line diagram, electrical distribution system, small power, street lighting, compound lighting, ELV etc.
• Determine the cable sizing & design routing for sub-main cabling and conduit/trunking wiring.
• Selection for cable, circuit breaker, transformers, UPS, VFD, generator.
• Supervise electrical installation, testing and commissioning.
• Preparation of project documents including technical proposal, load list, cable schedule, cable routing, switch-room layout, load flow, etc.
• Prepare the BQ for the RFQ.
• Fault and short circuit study, harmonic analysis.
• Preparing specifications and datasheet for RFQ and review offers from vendors for compliance to technical specification, compliance with codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, and optimization.
• Perform the cable sizing calculation and the voltage drop calculation.
• Supervise electrical installation, testing and commissioning.

JOB REQUIREMENT

• Degree in Electrical & Electronic engineering.
• Familiarity with AutoCAD, Navisworks.
• Minimum 3 years work experience in process plants or in the water/wasterwater industry, with good knowledge in electrical design of water and/or wasterwater treatment plants.

JOB SCOPE & JOB RESPONSIBILITIES

• Basic design of heat. Mass balance, PFD, P&ID, process calculation for Water & Wastewater, RO, demin, pre-treatment, biological, chemical, PWT, etc.
• Sizing of equipment, vessel, tank and selection of material, instrumentation, control philosophy, cause and effect matrix, HAZOP, IPF, SIL study, IOM manual, etc.
• Preparing datasheet for RFQ and review offers from sub-vendor for compliance to technical specification, Exd, ISA standards, codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, optimization and hand-over.

JOB REQUIREMENT

• Degree in Chemical /Environmental engineering or equivalent.
• Familiar with international standards, codes and regulations, offshore & onshore.
• Min. senior 10 years or engineer 5 years similar job scope preferably in Oil & Gas, Power Plant or in the water/wastewater Industries.
• Proficiency in AutoCAD is an added advantage

JOB ROLES & JOB RESPONSIBILITIES

• Work on environmental sustainability (ESD) and Green Mark related project for Master planning new buildings and existing buildings
• Review and study the building system efficiency and able to provide the solution to optimize the energy reduction
• Conduct site survey to understand the building performance, able to analyse on improved mechanical solutions for operational feasibility
• Overall project planning and management to meet client timeline
• Experience in Green Mark Certification and Application, familiar with authority submission will be advantageous
• To liaised/coordinated with project team, clients, contractors and suppliers on all ESD related matters
• Assist tender team in tender submission
• Any other duties assigned by management

JOB REQUIREMENT

• A Degree in Mechanical Engineering or Electrical Engineering, Facilities management, Environmental design and related engineering background
• Self-driven, independent and resourceful
• Good communication and interpersonal skills

JOB SCOPE & JOB RESPONSIBILITIES

• Basic and detailed design of heat, mass balance, PFD, P&ID, process calculation for Water & Wastewate, RO, demin, mixed bed, ultra pure water, chemical neutralization, chemical precipitation, treatment of wastewaters including HF, cyanide, backgrind, copper etc.
• Sizing and review of equipment such as pumps, vessel, tank and selection of materials, instrumentation, control philosophy, cause and effect matrix, HAZOP, IP, IOM manual etc.
• Preparing and reviewing of datasheet for RFQ and review offers from sub-vendor for compliance to technical specification, codes and regulation.
• Preparing and reviewing/checking documentation for submission and supporting project team on plant start-up, performance test, optimization and hand-over.

JOB REQUIREMENT

• Degree in Chemical/Environmental engineering or equivalent from an internationally recognized university.
• Minimum 3 years similar job scope preferably in design of semiconductor water and wasterwater plants.

JOB SCOPE & JOB RESPONSIBILITIES

• Basic design of heat. Mass balance, PFD, P&ID, process calculation for Water & Wastewater, RO, demin, pre-treatment, biological, chemical, PWT, etc.
• Sizing of equipment, vessel, tank and selection of material, instrumentation, control philosophy, cause and effect matrix, HAZOP, IPF, SIL study, IOM manual, etc.
• Preparing datasheet for RFQ and review offers from sub-vendor for compliance to technical specification, Exd, ISA standards, codes and regulation.
• Prepare documentation for submission and supporting project team on plant start-up, performance test, optimization and hand-over.

JOB REQUIREMENT

• Degree in Chemical /Environmental engineering or equivalent.
• Familiar with international standards, codes and regulations, offshore & onshore.
• Min. senior 10 years or engineer 5 years similar job scope preferably in Oil & Gas, Power Plant or in the water/wastewater Industries.
• Proficiency in AutoCAD is an added advantage

Job description:

• Prepare basic design of heat, mass balance, PFD, P&ID, process calculation for Water & Wastewater, RO, Demin, Pre-Treatment, Biological, Chemical, Produced Water Treatment, Desalination, Electrochlorination, Zero Liquid Discharge, Ammonia/Sulphate Removal, Condensate Polishing, etc. applications.
• Knowledge of equipment sizing, vessel, tank and selection of material, instrumentation, control philosophy, cause and effect matrix, HAZOP, IPF, SIL study, IOM manual, etc.
• Prepare a bill of material for equipment and material and source for manufacturer, supplier and fabricator to build up the costing sheet with quotation and proposed additional AVL.
• Verification of performance guarantee such as process parameters, electrical power, chemical consumption, replacement, etc.
• Preparing datasheet for RFQ and review offers from sub-vendor for compliance to technical specification, Ex-d, ISA standards, codes and regulation.
• Support Tendering team in preparing proposals inline with tender requirements.
• Ensure all costs are captured accurately in the costing file. Review costings and technical solution with Head of Departments.
• Work with commercial and various cross functional teams like SCM, Project Management, Process, Mechanical applicants for supporting the bids in terms of techno-commercial costings and writeups.
• Identify potential risks in the bids, vendor quotations and estimates, and in any related contract agreements across customers/channels.
• Occasional travel to handle customer clarifications.
• Collects and archives documentations regarding the offer/order and records assumptions and decisions taken during the tendering process.

Job requirements:

• Bachelor Degree in Chemical/Environmental Engineering or equivalent.
• Familiar with international standards, codes and regulations, offshore and onshore.
• Minimum 3 years of relevant experience in Oil & Gas, Chemical, Power Plant Industries.
• Meticulous with ability to prioritize work tasks to meet deadlines.
• Good communication and presentation skills.
• Have experience working with international teams.
• Willing to travel.

Job description:

• Prepare basic design of heat, mass balance, PFD, P&ID, process calculation for Water & Wastewater, RO, Demin, Pre-Treatment, Biological, Chemical, Produced Water Treatment, Desalination, Electrochlorination, Zero Liquid Discharge, Ammonia/Sulphate Removal, Condensate Polishing, etc. applications.
• Knowledge of equipment sizing, vessel, tank and selection of material, instrumentation, control philosophy, cause and effect matrix, HAZOP, IPF, SIL study, IOM manual, etc.
• Prepare a bill of material for equipment and material and source for manufacturer, supplier and fabricator to build up the costing sheet with quotation and proposed additional AVL.
• Verification of performance guarantee such as process parameters, electrical power, chemical consumption, replacement, etc.
• Preparing datasheet for RFQ and review offers from sub-vendor for compliance to technical specification, Ex-d, ISA standards, codes and regulation.
• Support Tendering team in preparing proposals inline with tender requirements.
• Ensure all costs are captured accurately in the costing file. Review costings and technical solution with Head of Departments.
• Work with commercial and various cross functional teams like SCM, Project Management, Process, Mechanical applicants for supporting the bids in terms of techno-commercial costings and writeups.
• Identify potential risks in the bids, vendor quotations and estimates, and in any related contract agreements across customers/channels.
• Occasional travel to handle customer clarifications.
• Collects and archives documentations regarding the offer/order and records assumptions and decisions taken during the tendering process.

Job requirements:

• Bachelor Degree in Chemical/Environmental Engineering or equivalent.
• Familiar with international standards, codes and regulations, offshore and onshore.
• Minimum 3 years of relevant experience in Oil & Gas, Chemical, Power Plant Industries.
• Meticulous with ability to prioritize work tasks to meet deadlines.
• Good communication and presentation skills.
• Have experience working with international teams.
• Willing to travel.

• Establishment of sectional organization in order to provide for efficient operation.
• Overall supervision of the administrative and technical affairs of the Section.
• Schedule of Civil activities and plan required resource for proposal purpose and execution of awarded projects
• Assessment of section staffing needs and recruiting, interviewing, reassignment of personnel and coordination with Human Resources Department.
• Provide direct management to project teams to ensure that the Civil and Structural engineering section is integrated with all other Engineering Sections and that the section deliverables are integrated to meet Procurement and Construction requirements and schedules.
• Understand company policy, project execution procedures, and ensure that these policies and project procedures are implemented thoroughly on each and every project.
• Be responsible for developing, monitoring and reporting of C&S budgets across all projects
• Be responsible for assisting Project Engineering Manager or GM in client liaison. This includes contract management, cost and schedule management, and change order management.
• Be responsible for overall project execution across the Structural discipline to ensure that our scope of services are clearly identified and understood by your section project staff and client project team members.
• Planning and designing of Civil and Structural works including Steel structure, Pipe rack and platform, RC tanks and equipment foundation, facility building, utility & drainage structures and any other structures included in the project.
• Review and verify all Civil and Structural related engineering works compliant to requirement and designed in an optimized manner.
• Leading a team of engineers in facilitating overall project C&S design coordination, submitting Request for information/Approval and resolving onsite daily technical issues. Planning and handling of C&S engineering works with outsourcing parties when there’s a need.
• Lead and/or participate in technical discussions with relevant parties such as clients, QPS, subcontractors and construction team
• Review and check civil/structural engineering deliverables such as concrete and steel drawings, 3-D models, calculations, specifications and material requisitions submitted by consultant.
• Reviewing subcontractor’s shop drawing, risk assessment, safe work procedures and method statements
• Ensure that document control and site records are properly updated in compliance to project quality plan. Establishing and maintaining standards and techniques for design and detailing work and specifications
• Reviews weekly timesheets for accuracy and conformance to company policy and approve all expense travel submittals.
• Review new project bid documents and provide critical C&S engineering inputs to Proposal department
• Assist Business Development on specific proposals and presentations when so requested.

Job Requirement:

• Occasional Travel to other Salcon project offices and project offices.
• Good practical experience in the analysis and design of concrete and steel structures and coordination of multi-discipline design.
• Thorough knowledge and experience with international standards like EC, ASCE codes and Singapore Local standards.
• Good practical understanding of C&S related software’s like Plant3D, Revit, Naviswork, StaadPro, Etabs, Prokon etc.
• Degree in Civil Engineering or equivalent.
• Minimum 15 year experience.

Job description:

• Prepare basic design of heat, mass balance, PFD, P&ID, process calculation for Water & Wastewater, RO, Demin, Pre-Treatment, Biological, Chemical, Produced Water Treatment, Desalination, Electrochlorination, Zero Liquid Discharge, Ammonia/Sulphate Removal, Condensate Polishing, etc. applications.
• Knowledge of equipment sizing, vessel, tank and selection of material, instrumentation, control philosophy, cause and effect matrix, HAZOP, IPF, SIL study, IOM manual, etc.
• Prepare a bill of material for equipment and material and source for manufacturer, supplier and fabricator to build up the costing sheet with quotation and proposed additional AVL.
• Verification of performance guarantee such as process parameters, electrical power, chemical consumption, replacement, etc.
• Preparing datasheet for RFQ and review offers from sub-vendor for compliance to technical specification, Ex-d, ISA standards, codes and regulation.
• Support Tendering team in preparing proposals inline with tender requirements.
• Ensure all costs are captured accurately in the costing file. Review costings and technical solution with Head of Departments.
• Work with commercial and various cross functional teams like SCM, Project Management, Process, Mechanical applicants for supporting the bids in terms of techno-commercial costings and writeups.
• Identify potential risks in the bids, vendor quotations and estimates, and in any related contract agreements across customers/channels.
• Occasional travel to handle customer clarifications.
• Collects and archives documentations regarding the offer/order and records assumptions and decisions taken during the tendering process.

Job requirements:

• Bachelor Degree in Chemical/Environmental Engineering or equivalent.
• Familiar with international standards, codes and regulations, offshore and onshore.
• Minimum 3 years of relevant experience in Oil & Gas, Chemical, Power Plant Industries.
• Meticulous with ability to prioritize work tasks to meet deadlines.
• Good communication and presentation skills.
• Have experience working with international teams.
• Willing to travel.

Job description:

• Responsible to develop and review electrical design plans, specifications, and construction documents for the project.
• Provide technical guidance and oversight to the electrical design team, ensuring that electrical systems are designed and installed according to project standards and codes.
• Collaborate with architects, structural engineers, and other stakeholders to ensure that electrical systems are integrated correctly into the building design.
• Review shop drawings, submittals, and RFIs related to electrical systems and equipment and provide timely feedback to the design team.
• Conduct site visits and inspections to ensure that electrical systems are installed correctly and according to the design plans and specifications.
• Manage the commissioning and start-up of electrical systems and equipment, including testing and troubleshooting.
• Provide technical support to the construction team, including addressing technical issues, resolving conflicts, and managing change orders related to electrical systems.
• Review engineering designs and calculations to ensure compliance with all relevant codes, standards, and regulations.

Job requirement:

• Bachelor's degree in electrical engineering or a related field is required.
• At least 8 years of experience in electrical engineering, with a focus on construction projects.
• In-depth knowledge of electrical systems, including power distribution, lighting, fire alarm, and other related system.
• Strong technical skills, including proficiency in computer-aided design (CAD) software and other relevant tools.
• Excellent communication, organizational, and problem-solving skills.
• Ability to work collaboratively with diverse teams and stakeholders.
• Knowledge of industry codes and standards related to electrical systems.
• Sound knowledge of key Health and Safety issues and legislation.