Job Requirements

1) To work as supporting Process Design Engineer to Project Lead Process Design Engineer

2) To co-ordinate with Process Designer to Prepare PFD & P&IDs

3) Perform Hydraulic calculations, surge analysis, Wastewater calculation, Firefighting calculation

4) Perform Tank Venting Calculation as per API 2000

5) Perform TRV and PSV Sizing Calculation as per API 520 & API 521

6) Prepare Tank Operating Level Calculation

7) Prepare Heat & Material Balance

8) Perform Heat Transfer Calculations

9) Prepare Material Selection Diagram

10) Prepare Process Line List, Product Data sheet

11) Participate in HAZOP / SIL Study and close out HAZOP / SIL Action sheets

12) Prepare Design Basis & System Description

13) Prepare Pollution control report and Fire safety report

14) Perform Tank emission calculation

15) Prepare Process data sheets for Equipments like pumps, Heat Exchangers, Refrigeration unit, Flare, Boilers, Oil Water Separators, Vessels

16) Prepare Process data sheets for Instruments like control valves, MOVs, Pneumatic actuators, Level Transmitters, Pressure Transmitters, Temperature Transmitters, Flow meters etc.

17) Prepare Process Control Philosophy & ESD Philosophy

18) Prepare Cause & Effect Diagram

19) Prepare Commissioning Procedure & Operation Manual

20) Review Vendor Documents for Process related information

21) Review Plot Plan, Piping Layout, Instrument Data Sheet, Equipment Data Sheets for Process related information as Inter Discipline Check

22) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

23) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word, MS Power Point

3) Smart Plant P&ID

4) Autocad

Code Knowledge

1) API 2000, API 520, API 521, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Qualification

Bachelor of Engineering (Chemical)

Experience

4 years to 7 years

* Only Shortlisted Candidates Would Be Notified.

• Prepare construction drawings including shop drawings submissions and approvals.
• Manage work progress on site, and work closely with consultants, sub-contractors and operation teams.
• Liaise with a team of BIM Modellers in the design and coordination works.

Requirements:

• Degree in Architecture
• At least 3 years of experience in Main Contractor.
• Competent to read and understand construction drawings.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Job Title: Design Engineer (ID5042)
Location: Tuas
Working Hours: Mon to Fri, 8.30am to 6pm
Salary: $4000 to $6300


Job Description:
• Design component and assembly with CAD software. Prepare engineering drawings and engineering bill of material
• Analyse, design, develop, maintain products and assist in their commercialization
• Review technical documentation including engineering specifications, drawings, calculation packs, bill of materials, guidelines and repair procedures
• Checking and approving drawings, information and documentation which meets engineering standard to enable the manufacturing group and other departments to produce and market product
• Attend and initiate Design and Development Planning and Review session to meet customer's and industry's need

Requirement:
• Have a Bachelor's Degree in Mechanical Engineering
• Have experience (5years) in mechanical engineering in Welding / Oil & Gas engineering or other related fields. At least 3 years of product design experience in Oil & Gas Industry
• Have knowledge in API Standards and Monogram
• AutoCAD and #D design are the basic knowledge. Most preferably already familiar with ProE/Creo, SolidWorks, CATIA. NX or similar CAD and FEA/CFD program
• Display good oral and written communication and presentation skills in English

(2 years contract, conversion or extension based on performance)

• Involved in large projects ranging from commercial, industrial, institutional, residential, healthcare and etc.
• Coordinate and carry out tender, evaluation, recommendation and award processes.
• Confidently administer the contract and effectively manage the project team and Consultants for best results.
• Proactively identify and resolve technical coordination, site and/or authorities compliance problems.
• Well versed with planning, codes and building regulations and be updated on contractual and authorities’ requirements.
• Strong design portfolio exhibiting a range of sustainable design project experience.
• Possess creative design thinking and excellent design detailing skills.

Requirements

• Architectural masters/degree recognized by Board of Architects Singapore.
• Minimum 3 to 5 years of post graduate architectural experience.
• Bim/Revit, Archicad, Autocad, Sketchup, In-Design, as well as basic rendering and graphics publishing software programs.

Other information

• 2 years contract basis (upon expiry of contract, either extension or conversion to perm based on performance, there is no bond to be served)
• All company benefits will be the same as a permanent staff

Interested and suitable candidate kindly click quick apply. Resume will be routed to Jasmine Chin Yan Min. We regret that only suitable candidate will be notified.

GEMS Recruit/EA License: 23C1459

EA Personnel No: R1442379 (Jasmine Chin Yan Min)

We’re looking for a hands-on and highly motivated Senior Editor to build and lead our global editorial team. You have a passion for technology (ideally fintech) and a proven track record of creating and editing high-quality content across multiple formats. You’ll be responsible for overseeing the editorial process, recruiting and managing a team of writers, and ensuring that all content meets our rigorous standards for quality and accuracy. You obsess about editorial integrity, ensuring comprehensive editorial reviews, and delivering engaging content that aligns with strategic priorities. You’ll be responsible for driving the creation of copy and content for all platforms–expect to cover a variety of areas, including thought leadership pieces, white papers, user stories, digital and OOH advertising, product videos, SEO-optimised blog posts, case studies, and more.

You’ll join the Airwallex Marketing team during a critical period. Following rapid growth, we’re building a team that enables both global consistency in process, tooling and methodology and local flexibility and speed in execution. This is a great opportunity to join that team and help shape the next phase of Airwallex’s growth.

Key Responsibilities:

• Manage a team of in-house writers and freelancers, providing guidance, feedback, and support to ensure the delivery of engaging content across multiple channels, including websites, social media, blogs, email campaigns, and more.
• Ensure consistency in messaging, tone, and branding across all content assets, adhering to company guidelines and best practices.
• Be involved across the entire editorial lifecycle, from developmental editing, fact checking, and proofreading, all the way to approvals.
• Oversee the editorial calendar, ensuring that all content is produced on time, and aligns to commercial outcomes.
• Work with SEO partners to optimise content while maintaining editorial soundness. Translate complex product knowledge into user-friendly guides and blog posts.
• Stay updated on industry trends, market insights, and competitor activities to inform content strategy and maintain a competitive edge.
• Partner with Product Managers and Product Marketing Managers to gain a thorough understanding of our products, and effectively articulate the differentiated value of our solutions.

Qualifications:

• 10+ years of experience in Content Marketing, Communications, Journalism, or a related field. Ideally, 5+ years of team management experience.
• Exceptional writing and editing skills, obsessive attention to detail, and a keen eye for design excellence.
• A genuine love of writing and the ability to abstract away complex concepts into relatable and engaging materials.
• A user-first approach that allows you to tailor content and communications to specific audience segments and profiles.
• Experience managing internal and external writers, designers, and other creative specialists.
• Familiarity with modern technology and platforms, including popular content management systems and HTML.
• Knowledge of SEO principles, social media trends, and digital marketing best practices, and a willingness to partner closely with Growth Marketing counterparts to drive results.
• Fluency in English; proficiency in additional languages is a plus.

Job Requirements

1) To work as supporting Process Design Engineer to Project Lead Process Design Engineer

2) To co-ordinate with Process Designer to Prepare PFD & P&IDs

3) Perform Hydraulic calculations, surge analysis, Wastewater calculation, Firefighting calculation

4) Perform Tank Venting Calculation as per API 2000

5) Perform TRV and PSV Sizing Calculation as per API 520 & API 521

6) Prepare Tank Operating Level Calculation

7) Prepare Heat & Material Balance

8) Perform Heat Transfer Calculations

9) Prepare Material Selection Diagram

10) Prepare Process Line List, Product Data sheet

11) Participate in HAZOP / SIL Study and close out HAZOP / SIL Action sheets

12) Prepare Design Basis & System Description

13) Prepare Pollution control report and Fire safety report

14) Perform Tank emission calculation

15) Prepare Process data sheets for Equipments like pumps, Heat Exchangers, Refrigeration unit, Flare, Boilers, Oil Water Separators, Vessels

16) Prepare Process data sheets for Instruments like control valves, MOVs, Pneumatic actuators, Level Transmitters, Pressure Transmitters, Temperature Transmitters, Flow meters etc.

17) Prepare Process Control Philosophy & ESD Philosophy

18) Prepare Cause & Effect Diagram

19) Prepare Commissioning Procedure & Operation Manual

20) Review Vendor Documents for Process related information

21) Review Plot Plan, Piping Layout, Instrument Data Sheet, Equipment Data Sheets for Process related information as Inter Discipline Check

22) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

23) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word, MS Power Point

3) Smart Plant P&ID

4) Autocad

Code Knowledge

1) API 2000, API 520, API 521, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Qualification

Bachelor of Engineering (Chemical)

Experience

4 years to 7 years

* Only Shortlisted Candidates Would Be Notified.

Job Description

• Takes the lead in identifying quality improvements and establish objectives to implement them
• Develop mechanical design drawings by applying sound engineering principles, with innovation, to meet design objectives
• Work with Sales team on conceptual design
• Review design to ensure product costing control and project schedule
• Ensure assigned machine must be test run before ship out handing over to customer
• Discuss and solve complex mechanical problems with manufacturing department, customers and suppliers

Job Requirements

• Diploma/Degree in Mechanical Engineering or equivalent
• Positive work attitude, willing to put in extra effort during peak period
• Able to work under tight schedule and under minimal supervision
• Strong communications skills
• Design experience in similar capacity, preferably in industrial Automation and Robotic Systems added advantage
• Working knowledge of Auto CAD
• Occasional travel maybe required

We regret that only shortlisted candidates will be notified.

about the company

Our client is a leading global leader of semiconductor solutions. They have operations globally across Taiwan, Europe, China, Korea etc. and they’re now on a look out for a Senior/Design Engineer to join their dynamic team during an exciting time in their development.

What you will be here for

• Define requirements and features for semiconductor equipment
• Develop concepts and architecture of new equipment
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps and valves
• Produce detailed engineering drawings
• Perform design verification and validation testing
• Improve design of legacy machines
• Application of analysis tools like Fish Bone Diagram, FMEA etc

What you will need

• Degree in Mechanical or Mechatronics Engineering
• Min 5 years of experience in automation / high precision machine / semiconductor equipment / High Speed Pick and Place design
• Must process knowledge and experience in the design of automation or semiconductor equipment
• Must process good knowledge for 3D CAD software
• Equipment troubleshooting experience will be a plus
• Ability to produce detailed Mechanical drawings and apply knowledge of Geometric Dimensioning & Tolerancing

If you are interested in the position , kindly send your CVs to yitwei.kwan(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving current job

We regret that only shortlisted candidates will be contacted

EA: 94C3609 / Reg: R1325913

Responsibilities:

• Execute conceptual design for MEP services and coordinate technical proposals with the design team.
• Acquire quotations for the project & award of tendering.
• Participate in site meetings and work with clients and stakeholders to assure M&E work progress.
• Adherence to statutory regulation and contractual commitments.
• Carry out handling the documentations and drawings as well as collaborate with the external QP/PE.
• Perform testing and commissioning of M&E and IT tasks.
• Deliver an exceptional service and foster a strong relationship with the clients.
• Any other ad hoc tasks as assigned.

Requirements:

• Bachelor’s Degree or Diploma in Mechanical Electrical Engineering.
• At least 4+ years of relevant experience in the Construction/Design Industry.
• Proficient in the Design (Electrical Power & Control Systems)
• Excellent knowledge of the electrical installations in accordance with the government regulations.

Interested candidates who wish to apply for the advertised position, please click on the APPLY button

below to send in your resume or send to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may

collect, use or disclose your personal information for purpose in connection with the services provided

by us.

Job Responsibilities

• Seeking tender opportunity
• Attend site briefing before tendering the project
• Prepare cost analysis based on the architectural drawings and materials required
• Obtaining sub-contractor’s quotation for various trade
• Prepare tender submissions, including bills of quantities and discuss with Senior QS for pricing
• Prepare for final submissions
• Monitoring progress and liaise with vendor
• Attend site meeting for on-going project
• Process VO and preparing final accounts
• Work as part of a team to ensure that the requirements of the client are delivered

Job Requirements

You are passionate, creative, an achiever, highly self-motivated and an independent individual who is details oriented, possesses strong skills relevant to the scope of work. Able to work in a team and independently, possesses excellent interpersonal, verbal and written communication skills and ability to perform under tight schedule and pressure.

• Training will be provided.
• Fresh Graduates are welcome to apply.
• Diploma/Degree in QS course or equivalent.
• Proficient in Microsoft Office Word and Excel.
• Able to converse with English and Chinese speaking clients, contractors and vendors to complete projects effectively
• At least 2 years experience in Interior construction

Employee Benefit

• Attractive remuneration, incentives and performance bonus.

Working Hours

• Monday to Friday, 9:30am to 6:30pm
• Walking distance from Bishan/Marymount MRT

WHY join us?

LifeUp is a One-Stop Marketing Solution for Realtors - 360 Virtual Tours, Videography, Photography, Social Media, Advertising. Our clients includes many of top division directors in the real estate space.

RESPONSIBILITIES

• The video content editor is responsible for video editing, creating video contents with raw materials and footage according to requirements
• Both offline and online post process of edited footage, final check of the video formats back-up to ensure
• Ability to think visually, conceptualise stories, and edit video packages independently

PRE-REQUISITES

• Proficiency in video/photo editing tools like Premiere Pro, Lightroom & Photoshop
• Problem solver, creative and independent
• Available for a minimum of 3 months

What’s in it for you

• Gain first hand industry experience in content creation for professional real estate & commercial industries
• Chance to learn how to navigate the VR space through relevant softwares

Want to design fun games that give out free money?

We’ve got an opening.

Sqkii is known for our flagship #HuntTheMouse campaign that gives away cold, hard cash to players who find hidden coins. If you’ve seen Singaporeans squatting in random spots, walking around with metal detectors, or sticking their heads under tables… you’ve probably seen one of our games in action. Besides our hunts, we also create custom games that bring players on other real life adventures and virtual journeys through their mobile screens — they’re also super cool, just ask the mouse.

Right now, we’re bringing #HuntTheMouse beyond the shores of Singapore to other cities across Asia-Pacific. We visited 5 cities in just Q2 2023 alone, and oh boy do we have big plans ahead. Big plans = bigger team, so we’re on the hunt (ha) for someone who wants to hop onto this thrilling ride.

As our UI/UX Design Intern, you’ll work your magic behind-the-scenes to bring our current and future games to wild new heights. Fair warning — we’re open to ideas from literally anyone in the team, so you can expect some pretty absurd plans amidst legit game thingamajigs. If you love games, understand games, and can’t wait to create some of the most exciting ones to date, we (and our Game Operations team) are 200% ready to meet you.

See below for more details and hit us up for a chat anytime.

P.S. After you’ve applied, we’ll send over some secret tasks for you to try your hand at before we arrange for a virtual chat!

What you’ll be doing:

• Performing in-depth research in order to create effective user personas, information architecture and user journeys
• Tackling clients’ product requirements with comprehensive UX design strategies, by applying gamer psychology and human-centred design principles
• Producing high quality UX design work, including, user flow diagrams, site maps, wireframes and prototypes (both in paper & digital formats)
• Conveying your vision for the final digital product through sketches, storyboards and mood boards
• Working closely with game designers, developers, copywriters, UI designers and other stakeholders to produce high-quality games
• (Bonus) Conducting tests for digital products at all stages of planning in order to analyse and predict user behaviour

What you’ll need:

• To be a current student at local Singapore public polytechnics or universities
• Knowledge of UX processes and usability design principles
• Strong understanding of hierarchy and layout design principles
• Understanding of game navigation and common UI patterns
• The ability to synthesise user research into UX design insights
• Good written and verbal communication skills
• Excellent time management and organisation abilities
• A high degree of self-motivation
• High attention to details
• Confidence, resilience, persistence
• Experience in game design would be a plus
• Commitment for at least three months, though the internship period is flexible

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Die Sorter.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

DUTIES & RESPONSIBILITIES

· Liaise with consultants, clients and subcontractors on the progress of M&E works.

· Management of material, equipment and manpower in his section to ensure proper and economic usage.

· In-charge of receipt, transfer and control of M&E construction materials in designated area.

· Enforce the implementation of occupational health and safety procedures in accordance to Project Safety manual.

· To implement and monitor that the permit to work system is properly followed on site.

· To follow all QA/QC procedures and implement CONQUAS standard for site works on site.

· Prepare daily report for related works,

· To ensure the progress of works is on schedule.

· Supervise and ensure works are in accordance to the contract drawings and specifications.

· Coordinate / prepare technical submissions with suppliers / subcontractors.

· Prepare method statement, shop drawings, CSD drawing, installation / T&C check sheets, work progress report and other relevant documents for M&E related works with project teams.

· To assist in updating site work status report.

· Assist the Project Manager on all M&E matters including preparing M&E Master Construction and T&C Schedule.

· Liaise and work with relevant authorities / subcontractors / clients on shop drawings / equipment submissions, inspections, testing requirements and commissioning.

· Hold technical discussions with various stakeholders to resolve technical / site issues.

· Ad-hoc duties as assigned by Management.

Store Design (Cosmetics) Assistant Manager

Duration: 1 Year Contract

Location: Bugis

Working Hours: 8.30AM - 5.45PM

The Assistant Manager, Store Design (Cosmetics) will be responsible for supporting the development and execution of store design strategies and concepts for our cosmetics department. This role will collaborate with cross-functional teams to ensure brand consistency, aesthetic appeal, and functionality of all store designs. The Assistant Manager will assist in managing project timelines, budgets, and vendor relationships to ensure successful implementation of store design initiatives.

Responsibilities:

• To lead and develop team members in designing counters and freestanding stores and provide project management and execution support for the brands in APAC and to stand in as a leader.
• Ensure brand’s image is maintained at a consistent level of excellence within guidelines set forth by global team to achieve cohesive effect in terms of architecture, detailing and merchandising layouts.
• Develop designs, technical drawings and specifications to market and chosen shop fitter for every new installation.
• Provide design and project management services to all markets with emphasis in bidding, supervising, and coordinating with various external vendors.
• Partner with local brand managers to ensure best locations within stores; analyze traffic flow to guarantee customer interaction; analyze architectural features; inspect sites to ensure cohesive design and speedy approval process.
• Educate affiliates and distributors to choose locations that best suit the brands’ needs; help affiliates understand technical aspects of store design, (i.e. reading drawings, explaining architectural terminology); educate and check for completeness of project request forms and the overall process.
• Educate and update new & existing shop fitters on new techniques, details, and directions for brands’ store design.
• Collaborate with Indirect Procurement team on cost optimization and price templates.
• Investigate, evaluate, and qualify new shop fitters for future markets and projects as needed.
• Liaise with regional design groups on store appearance; inform all parties involved of any updates and/or revisions to standard details.
• Develop “Punch List” (List of deficiencies) for each installation to ensure the compliance with design set.
• Provide guidance to junior designers or newly joined within the region by induction/orientation and manage circulation list for updating the wider Store Design & Visual Merchandise network and vendors.
• Work closely with Visual Merchandising team and other functions as needed to ensure complete, synergized, and articulated store presentation.

Requirements:

• Degree in Design or Art School education preferred; creative and has formal training in architecture or interior design.
• Minimum 5-6 years of experience in Interior or Architectural detailing and design. Candidates with relevant experience in the beauty and luxury industry will be an added advantage.
• Able to design scaled working construction drawing.
• Experience on CAD programs, and preferably skilled in VectorWorks, Sketchup and Photoshop.
• Understands retail store design aspects, i.e. lighting, furniture design, detailing fixtures, etc. as well as the importance of maintaining consistency.
• Presents in a professional manner; has a good understanding of corporate image and conduct.
• Manages time and team productivity by challenging current processes and proposing better methods, communications, and collaboration processes.
• Good communication skills.
• Boosts and supports initiatives and changes, and able to lead and act on the set direction.
• Willing to travel often even when given a short notice.

Job Summary

Our client is looking for a leader to drive and implement all aspects of the design process, from conception to launch.

Mandatory Skill-set

• Degree in Design, Arts, Computer Science or related field;
• Minimum 8 years' experience in as an UX/UI Designer in a software/tech business;
• Good experience with product management;
• Possess knowledge on UX/UI and able to design and create simple UI drafts;
• Proficient with Interaction Design, Visual Design, User Research, Front End Development, Product Design Strategy;
• Good hands on experience with Figma, Zeplin, Adobe CS (AI, PS, PR);
• Excellent experience of customer experience and engagement in digital businesses;
• Entrepreneurial attitude and passion for innovative solutions and brand experiences that enable progress for our customers;
• Experience of software engineering practices and tools in Agile & Scrum;
• Ability to work with and manage stakeholder at all levels;
• Excellent communication and leadership skills;
• Able to work in fast and challenging environment.

Desired Skill-set

• Agile / Scrum Certifications;
• Banking or Insurance experience.

Responsibilities

• Lead/Architect/Deliver customer centricity through business strategy, customer experience management/innovation, research and insight, iterative design/rapid prototyping and forward-looking strategies;
• Understand and design the customer insights into user journeys, storyboards, wireframes and prototypes;
• Planning of product roadmap aligning to company’s business strategy and design guidelines;
• Work alongside the production team to define user stories and translate into detailed requirements and tasks;
• Prioritize the various features and tasks for the production team;
• Spearhead activities in UI design, produce design concepts and detailed design using visual design drafting tools for both internal and external applications;
• Managing the product backlog;
• Perform market research on user needs and usability studies based on usage data, before incorporating these results into overall product design;
• Collaborate with other technology partners to define the roles and requirements of various sub-systems involved;
• Drive activities to research on advance technologies that could be incorporated to enhance user’s experience with the product;
• Planning of new product features and enhancements to continuously improve user’s experience and hence business success;
• Communicate product's vision and articulate design vision to various stakeholders.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

about company

I am currently working with a general insurance provider.

2-3 rounds of interview to offer stage. Flexible hybrid working arrangement. Majority of the stakeholders are based overseas.

about job

• Discover and translate customer insights into concepts, personas, user journeys, storyboards, system maps, wireframes and prototypes

• Set clear design guidelines, create and maintain a design system for coherent design and faster product development in an agile environment

• Execute UI design for external- and internal-facing applications (web / app)

• Work closely with Product Managers to ensure design meets business goals and end-user’s needs; excel in understanding complex product requirements and translate it into user-centric design solutions

• Communicate the product’s vision and articulate design decisions and trade-offs both verbally and visually to internal and external stakeholders

• Manage 2 product designers based in Indonesia

skills and requirements

• Min 5 years of professional experience as an UX/UI Designer in a software/tech business.

• Proven experience working in projects from the stage of ideation all the way to the delivery of development-ready assets

• Has experience managing/mentoring a small team of designers

• Great knowledge and hands-on experience with Figma, Zeplin, Adobe CS (AI, PS)

• Understanding of Front End development and experience working in agile/scrum methodologies

• Positive attitude and strong leadership qualities that inspire team members to deliver the highest quality

• Prefer someone from B2B background, Fintech/Insurance/Direct consumers domain

To apply online please use the 'apply' function, alternatively you may contact Stella at 96554170 (EA: 94C3609 /R1875382)

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Design Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Responsible for the creation of innovative product designs and improvement/development to existing product designs.
• Regularly engages with third parties (e.g. customers, suppliers, vendors, etc), contributing to the technical specifications development.
• Responsible for various aspects of projects and collaborates with support teams to develop operational procedures.
• Management of engineering design modifications, involving the review as well as approval of engineering’s drawings.
• Proficient in appointed meetings to ensure the compatibility, interfaces, and functionality of relevant components within associated systems.
• Attends project meetings, where technical details are presented.
• All other ad-hoc duties as assigned.

Requirements:

• Minimum Degree in Engineering or equivalent
• Minimum 6 years’ relevant working experience
• Understanding of various industry standards and offshore operations

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Permanent, 5 days, Clementi

Our Employer:

MNC manufacturer of sensors, sensor controllers and sensor systems for industrial automation .

Job scope

• To research, design and develop new or improved industrial sensors based on clients’ requirement
• To provide design support for product improvement, cost improvement, function improvements, manufacturing process improvements
• To manage Client technical documents
• To manage FMEA, DFM, tolerance analysis before mass production
• To Create test plan and perform mechanical verification
• To Collaborate internal department during entire product life cycle
• To Verify regulatory compliance (UL, CE, RoHS/REACH, etc.) with support from approval department

Requirements

• Degree in Mechanical/Mechatronic Engineering or equivalent
• 3 years experience
• High proficiency in design plastic moulding, metal injection moulding, sheet metal fabrication and other manufacturing technologies
• 2D & 3D CAD skills, SolidWorks is preferred

Added advantage :

·Knowledge of optics

We are seeking a creative and dedicated interior designer to join our team. The ideal candidate will have a keen eye for design and aesthetics, a passion for transforming spaces, and the ability to work collaboratively with clients and team members to bring visions to Life. This role involves working on a variety of projects, from residential to commercial spaces, ensuring each meets our high standards of quality and innovation.

Responsibilities:

• Collaborate with Clients to understand their design preferences, requirements, and budget constraints.
• Handles Sales Inquiries
• Quality leads will be provided.
• Cost proposals to clients.
• Develop and present design concepts, including space planning, color schemes, and furnishing (Layout, mood board, material board)
• Create detailed drawings / 3D perspective drawings using design software.
• Supervise the implementation of design projects, ensuring adherence to timelines and quality standards.
• Plan project schedule efficiently to meet client’s Deadlines.
• Ensure design proposal and timeline are achieved.
• Regular Site visit supervision.
• Ad Hoc duty.
• Able to prioritize work and multi-tasking.

Requirements:

• Self-motivated and willing to learn.
• Passionate in interior design
• Good oral and interpersonal skill
• Team player
• Preferably at least 1 year in interior design or equivalent
• Entry-level candidates are welcome to apply.

Benefit:

• Commission base and basic scheme are available.
• An annual incentive for sales target achievers.
• Annual leaves
• Medical benefit
• Career Advancement
• Mentorship will be provided.

Responsibilities

• Interacting with clients across the Design & Build journey;
• Working closely with Principal Architect and other stakeholders (QS, Project Manager, Site Manager) throughout the design development and implementation stages
• Developing project briefs and working on them in parallel with the build process. Candidate must be comfortable working closely with clients to finalize design details;
• Preparing design proposals using AutoCAD and traditional drawing methods;
• Contributing to planning applications and other regulatory application procedures;
• Collaborating with our in-house construction and QS teams to evaluate design aspects of a construction project for cost and functional considerations;
• Preparing and producing construction documents and specifications, including quality control of work produced by more junior staff/direct reports;
• Making site visits to check on progress and ensuring that the project is on time;
• Solving problems that might occur during building/construction stage;
• Carrying out defect inspections;
• Developing and collating design standards and SOPs with other Senior Architects

Requirements Include

• Master or Bachelor of Architecture equivalent (Recognised by BOA)
• Registration with BOA an advantage
• At least 5 years of relevant experience. Preferred experience in design or project management of landed residential projects (New Erections)
• Direct design development towards architectural intent
• Proficient in AutoCAD, Sketch up, Revit and/or Lumion
• Comprehensive knowledge of construction details and materials
• Capacity to work in a challenging and fast paced environment
• Team player, with the willingness to collaborate with QS and Construction Management colleagues in a respectful and equal grounds environment

The Vice President, Design Services (APAC) is responsible for the oversight of all design and construction related activities for new build projects and major CAPEX projects within the region. This is including but not limited to problem-solving, project design development/management, developing and implementing brand standards as necessary to keep each project on schedule and in budget and to, to provide consistency throughout all relevant FS properties.

This role is based in our Corporate Office Singapore reporting to the Senior Vice President, Design Services (Global) and will be supporting the design and construction needs for the Asia Pacific (APAC) region. The role requires travel based on project status and could be expected around 40% of the time.

Project Coordination

• Set clear department direction for a team of internal and external individuals tasked with providing design and architecture direction for projects/brands within the Four Seasons organization.
• Formulate, evaluate and execute an innovative and cutting-edge design and architecture strategy in line with the Company’s vision and values using all relevant resources and respecting sustainable design criteria to achieve the company’s short, mid and long-term objectives.
• Support and guide owners/developers/consultants with design and architecture reviews, analysis and provides feedback to develop new projects.
• Provide leadership that fosters a work environment that promotes teamwork, performance feedback, recognition, mutual respect, and employee satisfaction; promotes quality hiring, training, and succession planning that encompass the Company’s diversity commitment.

Department Strategic Development

• Develop and sustain strong vendor/consultant and developer relationships to drive and manage the Company’s design strategy.
• Represent FS Design Services at strategic industry events to develop and strengthen the company’s position as the leader in its segment within the entertainment and hospitality industry.
• Oversee guardianship of FS Brand Standards ensuring adherence by the Company’s business partners and make innovative recommendations as trends change.

Initiatives and Special Projects

• Work directly with SVP, Design Services on special projects as required.
• Lead internal Design and Construction initiatives (i.e., ESG, DIB, etc) as required.

Competencies: Key Behavioral Competencies, Technical Skills and Knowledge

• High degree of interpersonal skills to deal effectively with all business contacts.
• Excellent communication skills to convey concepts in a clear and understandable fashion.
• Disciplined adherence to schedules and consistent performance on deliverables.
• Possess various computer skills including CAD/other drafting software, creative software, Microsoft Office skills, and Acrobat.
• Strong knowledge of construction and design process within the luxury segment of hospitality.

Other Prerequisites – Professional, Educational and Experience

• Bachelor’s or Master’s Degree in Architecture, Engineering, Design or a related field required.
• Minimum 10 years’ experience managing the development, design, engineering, and construction of luxury hotels and resorts, residential, mixed-use hospitality and entertainment projects in domestic and international markets or related field.
• Architecture license and LEED certification required.

About The Company:

• One of the leading companies which is specializing in energy management solutions, marine & offshore project management and gradually expanding to Electric/Hybrid Propulsion, Marine Charging, Energy Storage, and AI-Assist Energy Management Systems.
• Working Days: Monday - Friday
• Working Hours: 8:30am - 6:30pm
• Location: Penjuru Lane

Job Description:

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.
• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.
• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.
• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.
• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified* We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Toh Qiu Wei | EA Personnel No.: R23116260

We are looking for a self-motivated candidate with expertise in high performance digital design and system level architecture modeling to join our Heterogeneous System design team. This candidate will work closely with IME’s advanced packing team and contribute to the exploration, optimization and development of multicore & multi-chip system using IME’s heterogeneous integration platform.

Job Description:

· Digital IC Design and system-level exploration:

o Lead and contribute to the design and development of digital integrated circuits, ensuring they meet performance and functionality requirements.

o <!-Emphasize a system-level perspective in the design process, considering overall system architecture and functionality.

o Apply a deep understanding of cryogenic temperature effects on digital ICs and implement design strategies for optimal performance in low-temperature environments.

o Incorporate Edge AI principles into digital IC designs, enabling efficient and intelligent processing at the edge of the network.

o RTL implementation for custom circuit design using Verilog/SystemVerilog

o Derive specs and implement necessary customized and highly efficient building blocks such as systolic array, data path controller, scheduler, integer and floating-point processing engine, FFT, etc which are frequency used in various computing architecture such as in-memory computing, deep learning and neuromorphic computing.

· Simulation, Verification, and Implementation:

o Conduct thorough simulation and verification of digital designs to validate functionality and performance.

o Utilize FPGA in digital IC designs, leveraging its flexibility and reconfigurability for system emulation and architecture exploration

o Perform timing analysis and collaborate with the team to optimize designs for timing closure.

o Contribute to power analysis activities and implement power-efficient design techniques.

Publish research works in prestigious conferences and Journals such as ISSCC, VLSI Symp, A-SSCC, DAC, JSSC and TCAS-I/II.

· Collaborate closely with cross-functional teams, including hardware and software engineers, to seamlessly integrate digital ICs into the overall system architecture.

· Prepare detailed design documentation, including specifications, test plans, and reports.

· Troubleshoot and debug digital IC designs with a focus on identifying and addressing system-level issues.

· Bring creative and innovative solutions to design challenges, staying abreast of industry trends and emerging technologies.

Requirements: Master’s, or Ph.D. in Electrical Engineering, Computer Engineering, or a related field. The candidate should have prior experiences in IC tape-out of digital/mixed signal SoC and system level modelling and optimization using industry standard tools from leading EDA vendors such as Cadence, Synopsis and Matlab.

Video Production:

• Plan from pre-production, production and post-production of video live stream, pre-recording and video shoot projects
• Record and edit video and sound projects, including selecting program format for final output, capturing/importing media,
• Bringing raw media to life by organizing and editing footage and sound files, creating and inserting static and motion graphics, titling adding music/voice-over/sfx media management and archiving project media
• Scriptwriting and story boarding
• Work closely with the editorial and studio teams
• Coordination and schedule logistical requirements for photo and video shoots
• Manage technical aspects including responsible maintenance and care for gears and equipment

Social Media Management:

• Preparing videos for online posting using the relevant descriptions and links
• Writing initial copy of video posts
• Handle posting of online (mostly video material) to the various social media platforms as well as the website.

Photography (Minor)

• Composing of shots, framing, colour and light to create visually appealing photographs
• Supplying of images for use usually for online content, especially in relation to video publishing.
• Enhance the subject/object’s appearance with natural or artificial light

Requirements:

• Proficiency with video editing and photography
• At least two years of relevant experience
• Proficient with video editing software especially with Premiere Pro, After Effects
• Colour grading and motion graphics knowledge is a plus
• Basic knowledge operating DSLR cameras, audio and lighting equipment
• Demonstrates ability to work collaboratively with various stakeholders.
• Ability to produce quality work in a fast -paced environment.
• Well-organised and a self-starter, capable of managing multiple projects.
• Willingness to learn
• Interest in watches or product videography are a bonus

(For reference, see our Instagram page revolution.watch and Youtube Channel: https://www.youtube.com/channel/UCQM6HXCgJmhjeXjV_uqOZUg)