Job Responsibilties

• Conducting site construction daily work for project and liaising with the consultants, vendors, contractors on site
• Preparing inspection forms, MSRA, site working schedule, daily site plan, daily report, assisting of Mech Eng/ manager on site document/ forms/report during construction & T&C stage
• Overseeing/ manage/ monitor/ control/ reporting site activities of sub contractors and coordinating on site level with other partners’ sub contractors
• Conduct construction, QAQC inspection/ testing for the area of responsibility as instructed by Mech Eng/ manager
• Attending all relevant WSH activities such as Safety site walk, TBM, audit, safety stand down etc
• Preparing, discuss and coordinate to address safety and health issue daily including identify, rectify, make good, report and closure of any Safety observation, findings, NCs and other safety related issues
• Interact with project technical supports for relevant site work and liaise with other engineer during project execution and commissioning work
• Liaison with local authorities, stakeholders when during site visit related to assign construction activities responsibility
• Coordinate on site logistic, interfacing with cranes, machineries
• Assist Mech Eng/ Manager in preparing of technical submissions of proposal (when needed) including drawing, layout and interacting point requirement
• To attend (if required by superior) the sub contractor meeting and attending any stakeholders, client, partners, authorities meeting whenever is required
• Any other instruction or direction by management
• To work shift and Sat/Sun whenever is required by the Superior. Leave in-lieu will be given base on employment agreement.

Job Requirements

• Diploma in Mechanical Engineering, or 10 years of relevant working experience in the same field
• Familiar with process engineering, mechanical system and their standards in related discipline is an advantage
• Related working experience in thermal power plant, process industries and mechanical handling equipment is an advantage
• Preferred to have heavy equipment lifting, planning and coordination experience
• Having correct working attitude and will be full time working on site
• Experience in BIM and hands-on AutoCad operating will be preferred
• Willing to work in Tuas
• Will be required to work on shifts, and working on Sat and Sunday with leave in-lieu arrangement
• Possession of Singapore Driving License is required. Else, willing to convert the current license to Singapore Driving License
• This is a 2 years contract role.

About our company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

About the role:

The Engineering Manager’s responsibilities includes various engineering coordinating tasks and handling queries from/to consortium partner, project owner, owner’s consultant, competent engineers for Singapore local codes and regulations and project stakeholders with all the related JEL's project teams. The candidate should also have excellent technical knowledge, a responsibility for Singapore local codes and regulations for executing projects.

Responsibilities:

• Plan and manage the execution of the multi-discipline design projects including preliminary engineering, detailed design and procurement.
• Ensure that Engineering work is performed according to procedures and processes, within the timeframe, according to the budget and to the quality level expected
• Act as the focal point for the communication with client in all techno-commercial matters. Also ensure that the engineering and procurement has been carried out to industry's best practices, international codes and standards and client specifications.
• Prepare and deliver various engineering and procurement related presentations both internally and externally.
• Review and recommend or approve POs, sub-contracts and cost estimates.
• Manage risks associated with engineering and procurement activities
• Develop, document, implement & deliver Engineering Execution methods in in-line with Company strategy.
• Any other duties to be assigned from time to time

Prerequisites:

• Degree in Mechanical Engineering
• Minimum 10 years of experience in similar role for power plant construction and EPC projects
• Strong leadership abilities with the capability to motivate and inspire multidisciplinary engineering teams
• Excellent communication skills, both verbal and written, for interacting with clients, vendors, project stakeholders, and internal team members
• Excellent planning and organizational skills
• Able to communicate effectively in English, both orally and in writing

Responsibilities:

· Assist in manpower and resource scheduling and deployment, daily man-hour returns and coordinate all aspects of site issues for repair projects

· Liaise with surveyors and comply with inspection requirements

· Monitor job progress and ensure quality work at targeted schedule

· Study and evaluate the work processes and methods of the department and explore new ideas to improve work quality and productivity

· Resolve any technical problems or issues with Designer, contractors, class & owner

· Evaluate technical and engineering requirements of the jobs

· Obtain and monitor drawings and technical information

· Prepare reports on job status and project completion

· Conduct Risk Assessment and hazard reporting

Requirements:

· Diploma/Degree in Marine/Mechanical Engineering or related fields

· Experience in managing subcontractors

· Able to interpret technical drawings and specifications

· Resourceful, committed, independent and a good team player

· Willing to work under on site environment-heat, grease and dust

Other Information:

· Location: Benoi Road (Island-wide transport provided)

· 5 days work week

· Working Hours: 7.25am-5pm

1. At least 2 years of experience in managing Xero Accounting software

2. Manage full set of accounts including receivables, payables, invoices, and reconciliation in Xero to complete accounting records

3. Perform daily finance transactions, reconcile bank statements, and submit monthly reports to management

4. Prepare GST declarations and CPF submissions

5. Follow up closely with overdue accounts receivable aging

6. Handling of the complete payroll system and salary processing

7. Ability to do MOM transactions, including processing work passes, and preparing employment agreements, Insurance matters, renewals, and cancellations.

8. Ad-hoc duties when required

• Understand the procurement process and assist in developing and implementing the new to be procurement process
• Perform procurement and related activities to meet the cost, schedule and quality requirements
• Involve in pre-qualification process from site audit to eventual qualification of new suppliers and contractors
• Involve in negotiation process with suppliers to ensure best possible terms and conditions
• Involve in raising commercial evaluation and coordinate technical evaluation with all the stake holders and get the necessary approval
• Periodically review project procurement plans and strategies for effectiveness and relevancy
• Analyze project scope of supply and contract requirements to ensure adequate risk analysis
• Perform Vendors/Suppliers’ performance evaluation
• Liaise with Finance on payment issues
• Work closely with operation team to understand their requirement, build a data base of required specifications for each item and their respective vendors
• Source for global vendors suitable for the required equipment, parts and spares, evaluate them through the operations team and make the part of the AVL
• Source for competitive pricing from different regions to ensure the most cost-effective procurement
• Handle all the operations’ material requisitions
• Prepare and issue the contracts and POs after the management approvals
• Follow up with the vendors for the timely delivery of the orders
• Check and ensure the correct items are delivered as per POs specification and quantities
• Work closely with the logistic coordinator for the timely shipment of the purchased items

We are seeking a highly motivated Accountant to join our dynamic team. As the Accountant, you will be responsible for managing the full set of accounts for the company, ensuring accurate, timely financial reporting and assist in some group matters.

Key Responsibilities:

• Prepare and review monthly journal entries.

• Cash flow management.

• Review payment for subsidiaries and intercompany monthly confirmation.

• Prepare for corporate income tax filing.

• Review GST working prepare by assistant.

• Liaise with bankers, external auditors, corporate secretarial and tax agents, etc.

• Assist in Group monthly / quarterly / half yearly financial reports.

• Ensure timely submission of ECI / Tax submission for the Group.

• Annual budget preparation.

• Perform any other ad-hoc projects or duties as assigned.

Qualifications:

• Bachelor’s degree in accounting or finance.

• At least 3 - 5 years of relevant experience in accounting or finance.

• Strong knowledge of accounting principles and practices.

• Proficient in Microsoft Office and Dynamic accounting software.

• Excellent communication and interpersonal skills.

• Ability to work independently and in a team environment.

If you are a highly motivated and experienced Accountant who is looking for a challenging and rewarding opportunity, we want to hear from you. Apply now and become a part of our dynamic team.

Ensure proper filing and documentation

• Managing and distributing information within office e.g. answering phones. Coordinate and provide support to internal department work flow and enquiries
• Data entry in Micros-Fidelio Materials Control
• andling administrative requests and queries from senior managers
• Organizing and scheduling appointments with admin software
• Planning meetings and taking detailed minutes
• Singaporean/Singapore PR
• Ensure proper filing and documentation
• Managing and distributing information within office e.g. answering phones. Coordinate and provide support to internal department work flow and enquiries
• Maintain contact lists
• Book travel arrangements

Job Description

If you are engineering trained, independent, self motivated and good team player, come join us as a Sales & Application Engineer.

• The candidates should be engineering trained.
• He/she is to maintain good relationship with existing customers and develop new businesses for the sale of company products (e.g. pumps & spare parts).
• Knowledge of handling tender documents, technical documentation and manual would be an added advantage.
• Daily tasks includes the handling of RFQ, attending to technical queries, provide technical solutions etc.
• Travelling within the region may be required.

Requirements

• Minimum Certificate in Engineering.
• With or without relevant experience as training will be provided.
• Possess a valid class 2/3 license would be an added advantage.
• Good engineering knowledge and self-motivated.
• Able to work independently, yet a good team player with positive work attitude

Remarks : Well performed candidates may be selected for overseas training.

Oversee the projects from beginning to end

1) Plan and schedule project timelines, material requisition.

2) Present reports defining project progress, problems, and solutions.

3) Obtain permits and licenses from appropriate authorities.

4) Prepare resource requirements on time to avoid potential delays.

5) Submit claims and assistant QS for work done certification.

B) Conduct site checks to monitor progress and quality standards

1) Supervise and inspect construction work on site, identify and solve site issues.

2) Collect, organize and update construction drawings, report changes on drawings to clients and designers in a timely manner.

3) Keep good documentation for recording purpose.

4) Supervise site clearance and submit daily site progress description.

C) Collaborate with subcontractors, engineers, designers, and key team members of the project

1) Liaise with subcontractors/designers and schedule follow-up meetings.

2) Coordinate with subcontractors to maintain schedule, review payment requests of subcontractors.

3) Attend weekly or monthly meetings with key team members on work progress and prepare monthly work progress report;

D) Enforce safety standards, implement workplace safety programs, and report issues.

Requirement:

Good knowledge of Microsoft office skills (Word, Excel and Project)

1) Possess effective organizational and follow-up skills with emphasis on attention to details

2) Excellent project & people management skills

3) Excellent presentation, management, and leadership skills

4) Ownership of Personal Transport preferred

5) AutoCAD skills preferred

Machining and Fabrication work shop

Job Scope.

Planning, organizing, and supervision of manpower, resources, materials, and equipment required to execute work scopes. Providing technical guidance and recommendation in accordance with relevant industry standards and best engineering practices.

The Fabrication Workshop Supervisor is responsible for managing the operations team to ensure they are working efficiently and safely at all times. Working with the management team to implement the program of works and co-ordinate the day to day activities of the workshop.

Responsibilities:

- To plan preventive maintenance & manage corrective maintenance for equipment (workshop machinery)

- To conduct annual stocktake and accountability for equipment (workshop machinery) & spares

- To ensure lock-out tag-out is carried out for defective equipment, identification, and segregation of serviceable and un-serviceable spares

- To maintain good records of equipment last servicing date, repair history of system and next schedule forecast

- To carry out indent, return or disposal of spares using SAP in accordance to procedures

- To manage repairable items with the respective workshops

- To carry out routine check to ensure the accountability of spares at workshops

Requirements:

- Higher NTC or NTC in any Engineering / Logistics / Supply Chain related discipline

- At least 2 years of working experience in the related field

- Able to work independently and multi-task

- Highly organised and able to store item efficiently with proper documentation filing

- Proactive, meticulous and willingness to learn

- Good interpersonal skills and pleasant personality

- Willing to work overtime and on weekend when required.

- Computer literate, with SAP MM and MS Excel proficiency

- Forklift licence will be advantageous.

Other Information:

• Location: Pioneer Sector 2 area
• Nearest MRT/Interchange: Joo Koon MRT Station / Joo Koon Bus Interchange
• Daily transportation reimbursed on monthly basis.
• days Work Week
• Working Hours: 7.25am-5pm

Responsibilities:

• Manage the ship ops readiness status of >90% monthly
• Monitoring and follow up of ships' defects promptly
• Join assessment on site with relevant parties for troubleshooting.
• Scope, review and approve aspects of work including both in-house and Contractor prepared studies and engineering.
• Provide engineering inputs in technical reviews to ensure technical integrity, efficiency, and safety of facilities.
• Conduct inspections, functional tests on site or workshop with relevant parties.
• Ensure that all work is done in a manner consistent with Company’s guidelines and policies.

Requirements:

• NTC/Diploma, preferably in Mechanical or Marine engineering field
• Preferably with 2-5 years’ working experience in marine related industry
• Knowledge of ship repairs, steelworks, fabrication works and NDT will be advantageous
• Able to read drawings
• Strong interpersonal and communication skills
• Experience in supervising workers and subcontractors in yard environment
• Proficient in MS Words, Excel, Powerpoint for reporting purpose

Other Information:

• Location: Changi
• Transport provided at or nearby: Jalan Bahar, Pioneer MRT, Boon Lay MRT, Lakeside MRT, Jurong West & East, Jalan Bukit Merah, Choa Chu Kang MRT, Bukit Panjang Plaza, Woodlands, Sembawang MRT, Yishun MRT, Bishan MRT, Ang Mo Kio MRT, Hougang Ave 8, Sengkang Square, Punggol Central, Pasir Ris MRT, Tampines MRT, Tanah Merah MRT
• 5 days work week
• Working Hours: 7.45am-5pm

Job Responsibilities:

• Responsible compiling tender information to identify key activities and confirm that tender requirements are within the capability of the Company.
• Provide support to the Commercial Department on claims, extension of time, cost control and financial recovery from customers.
• Assist in reviewing customer draft contracts to ensure compliance to project specifications and to identify deviations from accepted company policy, practices and any unusual business or logistical risk.
• Obtain global and regional cost data using market intelligence on projects competitors are bidding, executing and obtain competitors’ pricing, if possible.
• Maintain relationship with potential customers and with existing customers.
• Support General Manager, Marketing and Vice President, Marketing and Corporate Development in marketing and customer relationship management (CRM) activities.
• Responsible for planning and organizing marketing related tasks and activities, such as sundowner events.

Job Requirement:

• Degree/Diploma in Engineering / Marketing or equivalent
• Familiar with tender, proposal and estimating process and with prior experiences
• Min 2 years experience with techno-commercial bids & tenders in marine & offshore fabrication for oil & gas industry
• Candidate with no experience are welcome to apply (Training will be provided)
• Excellent Organisation, communication, negotiation skills
• Knowledge of contract law would be an added advantage

Job Responsibilities:

• Support the Workshop Manager in managing the Taxi Maintenance operations and ensure all KPIs are met.
• Ensure operation costs including but not limited to material, manpower and operating are kept within the operation budget.
• Review and enhance the existing systems without compromising quality or service while optimizing cost.
• Manage and ensure smooth day-to-day operations.
• Produce statistics and reports, to review performance and recommend procedural enhancement for discussion
• Establish, implement and monitor safe working practices and procedures.
• Perform routine safety inspections on equipment and sites to ensure workshop conforms to all health & safety regulations.

Job Requirements:

• Degree holder in Mechanical / Electrical / Electronic Engineering discipline or equivalent qualification
• Minimum two years experience in operations environment in Automotive Industry
• Able to build effective relationship with cross-divisional teams
• Proven tactfulness in communicating with others and constructively resolve challenges
• Excellent interpersonal and communications skills

The Candidate should be able to perform the following tasks,

· To monitor the installation progress as well as coordinate with Clients, Consultants, Subcontractors to ensure efficient and timely delivery of assignments.

· To report and monitor the progress of the project to the Project Manager.

· To supervise and ensure works are in accordance with the contract drawings and specifications.

· To prepare method statements, shop drawings, installations / T&C check sheets, work progress reports, and other relevant documents for M&E-related works with project teams.

· To coordinate with subcontractors and consultants on preparation and submission of shop drawings.

· To assist the Project Manager to negotiate/procuring materials, equipment, and labor in accordance with (or below) the allocated approved budget.

· To hold technical discussions with various stakeholders to resolve technical / site issues.

· To have experience in working at Data Centre.

· Mechanical: Familiar with VAV / VRV / cooling tower / Chillers / chilled water pipe / A&A works.

· Electrical: Familiar with retrofit / renovation / lighting control / BMS

Requirements

The candidate should also be experienced with the following.

· Building Automation Systems (Extra Low Voltage (ELV)

· Navisworks

· Knowledge on Revit will be an added advantage

· Microsoft Office

- Financial expert with knowledge in construction operations.

Roles and Responsibilities:

· Monitor and manage day-to-day financial operations of construction projects.

· Maintain and manage costing on construction projects financials, cost centres, job costs, and material costs and required costs for ongoing construction projects.

· Decision making on project budgets and manage the project financing.

· Manage cash flow and forecasting.

· Implementing cost control measures together with process improvements.

· Generating reports and proposals for budgeting requirements

· Attention to detail and analytical approaches.

· To maintain excellent relationship with project teams.

· Conduct in-depth reviews and analysis of all project or contract documents to be familiar with every detail or requirements.

· Assist in the maintenance, development, and enhancement of the company’s relationship with trade partners and contractors in a bid to produce strategic partnership.

Requirements:

· Minimum two years’ experience in construction sector or equivalent.

· Diploma or Degree in Business Management or equivalent.

· Good communication and leadership skills.

· Ability to work as a team and perform individually when required.

· Ability to be proactive and good in forecasting and planning.

Responsibilities:

• Organize & conduct EHS kick off meeting prior vessel arrival
• To assist Engineer (EHS) & Manager (EHS) in the implementation, review and improvement of yard’s Safety Management System to maintain a safe and healthy working environment in the yard and project.
• Assist SRM/PM to monitor & control inherent hazards prior work commencement
• Perform hotwork & hazardous works certification
• Assist SRM to organize VSCC meeting (Acts as Secretary)
• Maintain project EHS related record
• Coordinate the PTW system implementation
• Coordinate confined space attendants’ deployment
• Coordinate fire watchmen deployment
• Update vessel safety coordination board
• Coordinate & inspect fire fighting & rescue equipment deployed on vessels
• Drive the implementation of project EHS plan
• Drive the implementation of project accident prevention activities
• Drive the implementation of project risk management
• Investigate accident/incident & near misses
• Undertake performance appraisal of CSAs
• To enforce on compliance of all HSE related legislations.
• To assist the Engineer (EHS) & Manager (EHS) in establishing responsibility levels for hot work Assessor and confine space Assessor
• Undertake other tasks as directed by the Engineer (EHS) & Manager (EHS)

Requirements:

• Diploma/Degree related to EHS or any Engineering fields
• Possess Hotwork Assessor Certification & Confined Space Assessor Certification are added advantage
• Good understanding of Workplace Safety & Health Act & Shipbuilding & Ship Repairs regulation
• Good report writing & incident investigation & analytical skills
• Possess strong leadership & interpersonal skill
• Proficient in MS Office for reporting and presentation purpose

Other Information:

• Location: Tuas (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Addcel are looking for Senior Project Engineer who has experience in Project Implementation for Mechanical works especially Piping, Structural Steel and Tankage works. Follow through the whole project lifecycle from estimation, tendering, detail engineering to project management and implementation.

Responsibilities:

• Estimation and MTO
• Tendering & Proposal
• Value and Detailed Engineering
• Drafting using AutoCAD
• Project Planning, Documentation and Support
• Capture project progress and additional/ change orders
• Others as and when required by the management.

Requirement:

• Min. 2 - 5 years of relevant working experiences
• Min. Degree in engineering or equivalent
• Excellent skill in MS Office

• Effective leadership of all operational staff in Singapore including efficient manpower planning, ensuring technical competence of staff and monitoring of technical performance.
• Leading change and development within the SD function to meet future business demands to improve Lloyd's Register's competitive position.
• Ensuring that structures, processes, and procedures are coordinated and effective in meeting the business/commercial requirements for both internal and external clients.
• Liaising with SD counterparts to ensure consistency in development and delivery of services and application of best practices.
• Ensuring external and internal client expectations are understood and that the services offered meet these expectations and remain in accordance with technical, regulatory requirements and processes.
• Ensuring excellent service to internal and external customers in accordance with established quality standards and in compliance with the requirements of the Group Management System.
• Dealing with business queries and build relationships with internal and external clients, as appropriate, to resolve service problems and build the business.
• Mentoring and coaching team members, as appropriate, to achieve effective knowledge transfer and application.
• Delivery of operational financial performance against agreed targets.
• Delivery of non-financial performance against established metrics and targets.

Roles & Responsibilities

· To perform field support activities both in Company premises as well as on site, I.e. to perform engineering work such as dismantling, maintenance, repair, overhaul & installation works.

· In the course of work, he must ensure his work adheres to the required security, safety & quality standards in the company. He needs to co-ordinate job activities to consistently meet timeline, customer job requirements and statutory regulations. And, to prepare service reports upon completion of jobs.

· Secondary appointment is to perform collection and delivery of goods from and to the Customers’ locations, physical check of collected and delivered platforms, liaising with customers and other tasks as and when required by his Supervisor.

• Others ad-hoc duties as assigned

Requirements:

· Able to read and understand English

· Able to use basic hand tools, power tools, production equipment related to assembly trade such as torque wrench & lifting equipment

· Able to operate basic workshop equipment like drilling, welding, grinding

· Must be open to commit for OT

· Class 3 Driver’s License is an advantage

The School of Mechanical and Aerospace Engineering (MAE) at NTU Singapore is a top 11 Mechanical and Aerospace Engineering School in the world. With well-established industry partnerships, MAE provides an active and vibrant research environment with excellent R&D infrastructure and numerous opportunities for research funding. The school has an enrolment of over 2500 undergraduate students with over 90 faculty members and 140 full-time research staff working in well-equipped state-of-the-art laboratories. A growing research student population of over 400 is also actively engaged in strategic research and development work.

We invite highly qualified candidates in the relevant expertise areas to join our dynamic team of faculty.

Surface Engineering, Metrology, Precision Engineering

Candidate Profile:

• Possess relevant Bachelor and PhD degrees from reputable universities.
• A good research track record, and postdoctoral experience would be advantageous.
• Teaching experience at either undergraduate or graduate levels will be an advantage.
• Research intersects the multidisciplinary field of Surface Engineering, Metrology, and Precision Engineering.
• Expertise in Advanced Surface Engineering, Surface Metrology, Surface Science and Characterization
• And/or Expertise in Advanced Engineering Metrology, Mechanical Metrology, Dynamic Metrology.
• And/or Expertise in Advanced Precision Engineering, Precision Metrology, Precision Optical Systems.
• And/or Expertise in Translational research work with Industry on AI/ML applications.
• Successful candidates are expected to teach at both undergraduate and graduate levels, supervise graduate students and undergraduate projects. Candidates on tenure-track are expected to conduct high impact research and acquire competitive research grant and funding to sustain an active research portfolio.

We Provide:

• An active and vibrant research environment
• Excellent R&D infrastructure and opportunities for research funding
• Well-equipped state-of-the-art laboratories
• Attractive research start-up grants and PhD student scholarships
• A competitive remuneration package and attractive benefits

Roles & Responsibilities

PG Engineering Pte Ltd is looking for a competent Project Engineer for process and construction & industrial projects in island wide. The project engineer is responsible for and required to be the core interface with the Team in support of our Client, and to ensure the highest level of service to our Client. The project engineer will oversee, monitor and coordinate the project to ensure it is completed on or before time, to budget and to the specified quality standards and coordinate with project managers.

From our Singapore office we currently provide a range of project management services to International Corporations and Government entities including the following:

• Strategic Project Definition and Advisory Services;

• Client Representative Services;

• Due Diligence studies;

• Cost and Budget;

• Planning and Programme Management;

• Project Management;

• Design Management;

• Procurement Management;

• Construction Management;

* Management handling with upgrade;

* Management control c/w procurement and overall projects team;

Job Responsibilities:

The role involves the execution of duties to the highest possible standards. Your primary responsibility will be to lead and perform all of the activities necessary to plan, procure, manage and administer all issues related to power & construction and industrial site work.

Your duties will involve working closely with project staff and contractors across multiple technical disciplines requiring the supervision of numerous simultaneous tasks to meet very specific and immovable milestones. You will be privy to confidential information by necessity.

You will treat all such information with the highest levels of confidentiality and will perform your role with integrity and honour at all times.

It is expected that the Project engineer role will require, but not be limited to the following key functions:

• Planning/Scheduling

• Implement a high-level effective project management framework and method statement, incorporating necessary review processes as required

• Review the master programme and other reports to ensure timeline is met

• Secure resources, suppliers, product for the Client as required

• Monitor the design, construction, and dismantling programme and identify opportunities for improved delivery

• Risk Management

• Proactively identify potential problems, conflicts, design and delivery issues using risk management tools and skills to mitigate impact on the project

• Identify Health and Safety issues and to report as per procedure

• Site, Oversee the effective operation of the activities related to the P&C Contracts through conducting regular site visits and quality checks

• People, Manage and direct the P&C team to provide overall superintendence and ensure that the project team staff, contractors, etc., work well and provide a supportive environment for the achievement of the project

• Holding weekly staff meeting with P&C team, monitoring and reviewing staff working hours and writing performance reviews for P&C staff

• Contract Management • Negotiate and convert contracts as required by the project

• Oversee the award of contracts and ensure the client is adequately protected

• Scheduling, minuting and issuing various project meetings and ensure minutes are actioned in a timely manner

• Provide regular and accurate reporting on the project progress, costs and quality

• Review and oversee the management of all P&C contracts and ensure that there are no major gaps or issues in providing the required P&C deliverables

• Monitoring and reviewing all P&C work instructions and variations ensuring that all information is accurate, recorded and follows the designated project approval process

• Manage and document changes/variations following approval by Client • Ensure contractors and consultants are paid in accordance with contract schedules

• Review any procurement requirements and provide all necessary P&C technical support to the procurement process • Client Management

• Take the leading role in interfacing with the Client and contractors on all P&C matters at all project stages

• Actively seek and implement strategies to improve the client’s position in regard to return and value

• Identity and resolve disputes quickly and reasonably

• Develop and maintain excellent relationships with Client, authorities, consultants, contractors and adjoining property owners/stakeholders

• Reporting

• Monitoring, reviewing and implementing appropriate document control processes in line with quality control procedures

• Preparing monthly status report input on all P&C activities and including a detailed analysis of power consumption and utilization

And any other work-related tasks or duties deemed required and assigned by the line manager.

Job Requirements:

• Electrical & Mechanical Engineering qualification with minimum 6 -10 years relevant experience

• Master Degree in Electrical / Mechanical systems in the relevant field in the process & construction industry

• Contract administration experience

• Excellent overall knowledge of most P&C systems, Knowledge in innovative components introduce and handling.

• Knowledge in electrical power distribution, Smart DB’s, PLC / SCADA programming

• Experience working in construction & industrial design firms

• Manage and coordinate the inputs of project stakeholders to ensure the successful delivery of the project

• Assess and resolve site planning and coordination issues

• Apply quality management principles and processes

• Possess a keen eye on detail to deliver the highest quality of standard

• Apply risk assessment and management principles and processes

• A capacity to communicate professionally and confidently with a diverse range of people at all levels

• Strong written communication skills, with a demonstrated ability to draft reports, minutes, correspondence, procedures, processes and forms

• Sound literacy in computer software, including the Microsoft Office range. Excellent knowledge of Word and Excel • Ability to read technical drawings

• Ability to work with limited supervision

• Flexibility and ability to work with different areas of the business Punctuality with attendance and with delivering tasks on time.

Project Manager (Maintenance & Consturction)

Occupation Manager, Project (process & Construction)

Job Description & Requirements

PG Engineering Pte Ltd is looking for a competent Project Manager cum Manager (P&C Manager) for Process & Construction and industrial projects in island wide. The project manager is responsible for and required to be the core interface with the Team in support of our Client, and to ensure the highest level of service to our Client. The project manager will oversee, monitor and coordinate the project to ensure it is completed on or before time, to budget and to the specified quality standards.

From our Singapore office we currently provide a range of project management services to International Corporations and Government entities including the following:

• Strategic Project Definition and Advisory Services to maintenance & projects

• Client Representative Services;

• Due Diligence studies;

• Cost and Budget;

• Planning and Programme Management;

• Project Management;

• Design Management;

• Procurement Management;

• Construction Management;

* Management handling with upgrade;

* Management control c/w procurement and overall projects team;

Job Responsibilities:

The role involves the execution of duties to the highest possible standards. Your primary responsibility will be to lead and perform all of the activities necessary to plan, procure, manage and administer all issues related to power & construction and industrial site work.

Your duties will involve working closely with project staff and contractors across multiple technical disciplines requiring the supervision of numerous simultaneous tasks to meet very specific and immovable milestones. You will be privy to confidential information by necessity.

You will treat all such information with the highest levels of confidentiality and will perform your role with integrity and honour at all times.

It is expected that the P&C Manager’s role will require, but not be limited to the following key functions:

• Planning/Scheduling

• Implement a high-level effective project management framework and method statement, incorporating necessary review processes as required

• Review the master programme and other reports to ensure timeline is met

• Secure resources, suppliers, product for the Client as required

• Monitor the design, construction, and dismantling programme and identify opportunities for improved delivery

• Risk Management

• Proactively identify potential problems, conflicts, design and delivery issues using risk management tools and skills to mitigate impact on the project

• Identify Health and Safety issues and to report as per procedure

• Site, Oversee the effective operation of the activities related to the P&C Contracts through conducting regular site visits and quality checks

• People, Manage and direct the P&C team to provide overall superintendence and ensure that the project team staff, contractors, etc., work well and provide a supportive environment for the achievement of the project

• Holding weekly staff meeting with P&C team, monitoring and reviewing staff working hours and writing performance reviews for P&C staff

• Contract Management • Negotiate and convert contracts as required by the project

• Oversee the award of contracts and ensure the client is adequately protected

• Scheduling, minuting and issuing various project meetings and ensure minutes are actioned in a timely manner

• Provide regular and accurate reporting on the project progress, costs and quality

• Review and oversee the management of all P&C contracts and ensure that there are no major gaps or issues in providing the required P&C deliverables

• Monitoring and reviewing all P&C work instructions and variations ensuring that all information is accurate, recorded and follows the designated project approval process

• Manage and document changes/variations following approval by Client • Ensure contractors and consultants are paid in accordance with contract schedules

• Review any procurement requirements and provide all necessary P&C technical support to the procurement process • Client Management

• Take the leading role in interfacing with the Client and contractors on all P&C matters at all project stages

• Actively seek and implement strategies to improve the client’s position in regard to return and value

• Identity and resolve disputes quickly and reasonably

• Develop and maintain excellent relationships with Client, authorities, consultants, contractors and adjoining property owners/stakeholders

• Reporting

• Monitoring, reviewing and implementing appropriate document control processes in line with quality control procedures

• Preparing monthly status report input on all P&C activities and including a detailed analysis of power consumption and utilization

And any other work-related tasks or duties deemed required and assigned by the line manager.

Job Requirements:

• Electrical / Mechanical Engineering qualification with minimum 10 -15 years relevant experience

• Master Degree in Electrical / Mechanical systems in the relevant field in the power & construction industry

• Minimum 10 years’ project management experience, including minimum of 5 years’ experience in Singapore.

• Contract administration experience

• Excellent overall knowledge of most P&C systems, Knowledge in innovative components introduce and handling.

• Knowledge in electrical power distribution, Smart DB’s, PLC / SCADA programming

• Experience working in construction & industrial design firms

• Manage and coordinate the inputs of project stakeholders to ensure the successful delivery of the project

• Assess and resolve site planning and coordination issues

• Apply quality management principles and processes

• Possess a keen eye on detail to deliver the highest quality of standard

• Apply risk assessment and management principles and processes

• A capacity to communicate professionally and confidently with a diverse range of people at all levels

• Strong written communication skills, with a demonstrated ability to draft reports, minutes, correspondence, procedures, processes and forms

• Sound literacy in computer software, including the Microsoft Office range. Excellent knowledge of Word and Excel • Ability to read technical drawings

• Ability to work with limited supervision

• Flexibility and ability to work with different areas of the business Punctuality with attendance and with delivering tasks on time.

Job Requirements

1) To work as supporting Process Design Engineer to Project Lead Process Design Engineer

2) To co-ordinate with Process Designer to Prepare PFD & P&IDs

3) Perform Hydraulic calculations, surge analysis, Wastewater calculation, Firefighting calculation

4) Perform Tank Venting Calculation as per API 2000

5) Perform TRV and PSV Sizing Calculation as per API 520 & API 521

6) Prepare Tank Operating Level Calculation

7) Prepare Heat & Material Balance

8) Perform Heat Transfer Calculations

9) Prepare Material Selection Diagram

10) Prepare Process Line List, Product Data sheet

11) Participate in HAZOP / SIL Study and close out HAZOP / SIL Action sheets

12) Prepare Design Basis & System Description

13) Prepare Pollution control report and Fire safety report

14) Perform Tank emission calculation

15) Prepare Process data sheets for Equipments like pumps, Heat Exchangers, Refrigeration unit, Flare, Boilers, Oil Water Separators, Vessels

16) Prepare Process data sheets for Instruments like control valves, MOVs, Pneumatic actuators, Level Transmitters, Pressure Transmitters, Temperature Transmitters, Flow meters etc.

17) Prepare Process Control Philosophy & ESD Philosophy

18) Prepare Cause & Effect Diagram

19) Prepare Commissioning Procedure & Operation Manual

20) Review Vendor Documents for Process related information

21) Review Plot Plan, Piping Layout, Instrument Data Sheet, Equipment Data Sheets for Process related information as Inter Discipline Check

22) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

23) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word, MS Power Point

3) Smart Plant P&ID

4) Autocad

Code Knowledge

1) API 2000, API 520, API 521, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Qualification

Bachelor of Engineering (Chemical)

Experience

4 years to 7 years

* Only Shortlisted Candidates Would Be Notified.

Job Responsibilities:

• Knowledge in understanding the Schematic Diagram.
• Report to the production manager regarding of the progression.
• Performing the electrical wiring, termination, installation as per drawing for control panel, instruments and machine.
• Troubleshooting, testing and commissioning (electrical part).
• 1 - 3 years of relevant working experience in handling the forklift.
• Preferably to have experience in electrical , shipyard, oil and gas and petrochemical
• Able to work independently and proactively and work under fast pace environment.