Key Responsibilities and Accountabilities :

1. To work and co-ordinate with design/construction teams for all M&E installation and system requirement matters

2. To attend E&M Co-ordination Meetings and write Minutes of Meeting

3. To co-ordinate with Civil/BIM teams & all SWC for station and viaduct CCSM/SEM drawings and submissions

4. Review project specifications, technical clarifications and construction drawings

5. Manage in-house E&M sub-contractors’ work to ensure shop drawing and services are well co-ordinated to suit sequence and installation

6. Supervise and lead an installation team on E&M services installation in construction environment

Requirements :

1. Degree / Diploma in Mechanical/Electrical Engineering and/or Specialist Diploma in M&E co-ordination will be an advantage

2. At least 5 years experience in LTA projects M&E Coordination in local construction firm/LTA-MRT Project

3. Able to read and understand CAD, Revit/Navisworks software services in 3D model is essential

4. Good knowledge of local standards & requirements

5. Understanding of a Design & Build contract/project

6. Independent, self-motivated, proactive with a positive attitude

Responsibilities:

Report to the Team Lead/Service Manager and in fulfilling SLA and KPI in accordance to maintenance contractual agreement

Assist Team Lead/Service Manager to deliver contract obligation within budget

Able to operate and thrive in a dynamic work environment where you are required to liaise with both internal and external stakeholders

To perform routine onsite Preventive Maintenance in accordance with the maintenance instructions / procedures

To carry out Corrective Maintenance in accordance with the maintenance instructions / procedures, involving fault troubleshooting, diagnosis & replacement of equipment/module/component at sites and/or workshop.

Provide engineering services such as engineering reports, supply support, configuration control and management and obsolescence management

Requirements:

Minimum Higher Nitec/Diploma in Electronics/Mechatronics or equivalent

Perform 24/7 off-site standby for fault activation after office hours

Positive work ethics and team player

Takes ownership of responsibilities

Able to work effectively in an outdoor environment.

Proficient in MS Office (Words, Power-point & Excel)

Possess Class 3 Driving License is of advantage

Candidates will be required to travel to multiple sites in Singapore

Candidates without experience are welcome to apply

Responsibilities

• Manage the project site by overseeing the day-to-day activities related to the construction of the project as designated by Project Manager
• Liaise with consultant for technical issues and coordinate the site activities with subcontractors
• Conduct inspection and checks on work performed by subcontractors
• Assist in the planning and sequencing of the construction operations
• Prepare project-related reports and method statement for submission

Requirements

• Degree in Civil Engineering recognized by PEB or qualification acceptable to the Commissioner of Building Control as eligible for application as a Resident Engineer, or recognised Degree in the relevant field subject to the acceptance of the Engineer, and at least 3 years of experience in the construction supervision for projects of similar scale and complexity.
• Minimum 5 years relevant experiences in Engineering and construction industry
• Experience with LTA Project is an advantage, work location nearby Boon Lay MRT.

Join Our Growing Team!

As Skylink Group Holdings continues to expand, we're looking for passionate and talented individuals to join our journey. Our success has opened up exciting new roles across various departments, offering a wealth of opportunities for professional growth. At Skylink Group Holdings, you'll not only be a part of our success story but also a culture that values innovation, teamwork, and work-life balance. We offer a dynamic working environment, competitive benefits, and a chance to work with some of the brightest minds in the industry. Be a part of Skylink Group Holdings where your journey to excellence begins.

The Job

• Assist with leasing sales admin process and coordinating with inter-department for day-to-day work
• Handling of incoming calls and providing customer service
• Administer and handle the latest Enterprise Resources Planner (ERP) and Customer Relationship Management (CRM) systems
• Responsible for accuracy data entry input; filing for all data record documentation in the ERP & CRM systems
• Prepare printed materials and compilation of reports
• Liaising with vendors, suppliers & partners for administrative & payment arrangements
• Good problem solving and analytical skills
• Excellent understanding of processes and able to quickly grasp system flows
• Follow up closely with the team's work progress

Requirements

• Min qualification diploma with 2 years’ experience in admin work
• Similar experience in the automotive industry is an advantage
• Strong computer skill, including Microsoft Word, Excel and Power Point
• Strong in English, able to write, type and speak
• Able to converse in Mandarin with customer
• Fast in respond and able to handle multiple task efficiently in a fast-paced environment
• Flexible, resilient and positive mindset

• Mentoring the progress and utilities team involved in the variety of LTA/MRT project.

• Develop designs of wet & dry utilities, utilities diversion schemes according to different standards and requirements.

• Propose circuit and line on each utility agency.

• Management of NCE and trial trench works for locating existing utility.

• Coordinate with authorities, consultants, sub-contractors and project site operation team to facilitate installation works and progress on site.

• Responsible for managing all aspect of utilities coordination works planning and technical co-ordination of all services installation work scheduling for LTA/MRT Project.

• Manage & monitor progress, quality of workmanship and compliance with authority requirements to get an approval for water, drainage and other major utilities diversion.

• Positive working attitude.

• Meticulous and detailed in work.

• Able to start work in short notice.

• Working location nearby Boon Lay MRT.

• Minimum 5 years of Engineering experience with Degree in Civil Engineering recognized by PE Board or qualification acceptable to Commissioner of Building Control as eligible for application as Resident Engineer or Recognise Degree in the relevant field subject to the acceptance of the Engineer/Manager and at least 3 years of experience in the construction supervision for projects of similar scale and complexity.

Job Description

• Plan & monitor daily Operations staff duties
• Plan & monitor Fleet & Non-fleet customer vehicles for maintenance & inspection
• Raise quotation for damages upon vehicle check return & inform the hirer.
• Monitor all releases/returns/replacements and ensure all documents are uploaded into the system.
• Liaising with workshops on vehicle issues/GPS installation etc
• Any other ad-hoc job assigned by the supervisor

Job Requirements:

• Minimum 2 Year(s) of working experience in the related field is required for this position.
• Great teammate with initiative and a positive attitude towards learning
• Self-motivated individual with strong sense of responsibility
• Possess a valid class 3 driving license

Need Office Cleaner @ Yishun

Job Description

Vaccuming, Moping, wash 1 toilet and cleaning of general area.

Timings

2 times a week for 2 hrs

Flexi work time.

Basic Salary - $300/month

Interested candidates please contact us on 6266 6008 or

WhatsApp your resume to 9727 5258 / 9336 0752

Responsibilities :

• Ensure that all task perform on the shop floor adhere to safety protocols
• Accurately reads and understands engineering drawings and work instructions
• Fabricate quality parts, meeting production schedules and time lines for delivery
• Perform production related or ad hoc duties as assigned by the Foreman or Management
• Setup and operate CNC machine tools to machine parts to required specifications as in drawings
• Take measurement using instruments or gauges and documents quality check
• Marked parts identification, maintain a clean and organized work area

Requirements:

• O Level/Nitec in Precision Engineering
• Minimum 1 year experience in Machine Shop
• Understanding of precision engineering drawings
• Knowledge and experience in operating CNC machines

Job Responsibilities:

• Prepare, Process and Follow up on Sales Orders.
• Review customer’s requests and prepare quotation in response to customer enquiry.
• Perform order entry duties accurately and in a timely basis.
• Generate manufacturing documentation to manufacturing planning for creation of Production Order.
• Review Delivery Orders to ensure error-free before goods delivery.
• Update and maintain delivery schedule or re-schedule.
• Update of Sales Order status.
• Prepare weekly or periodic reports of compiled orders.
• Others ad-hoc duties may be assigned.

Requirements:

• Minimum GCE O level
• Minimum of 1 years of work experience as Sales Coordinator or Shipping Assistant
• Preferred with knowledge of SAP
• Preferred with knowledge of Shipping process
• Must be detail-oriented and strong organizational skills
• Competence with Microsoft Office
• Good personality and able to handle customer queries

Job Responsibilities:

• Attend to sales enquiries, quotations and responding to customer enquiries.
• Manage RFQ, review quote package, generate accurate and detailed quote summary for review.
• Liaise with purchasers on cost involving on the sales enquiries or quotations.
• Follow up with customers regarding quotations.
• Collaborate with internal resources to identify the make/buy logic for the bill of materials.
• Apply work knowledge to improve quote formats and output efficiency.
• Others ad-hoc duties may be assigned.

Requirements:

• Nitec/Higher Nitec or Diploma in Mechanical/Precision Engineering.
• Proficient in Microsoft Excel.
• Familiarity or experience on CNC machining or precision engineering environment preferred.
• Well verse in Microsoft Office.
• Able to interpret mechanical/technical drawings, bill of materials, specifications and Geometric dimensioning and tolerancing (GD&T).
• Familiar with CNC metal machining process like turning and milling etc.
• Pleasant personality and able to communicate well with customers for their request.
• Meticulous, excellent with details.
• Knowledge of SAP is an advantage.

Job Description & Requirements

- Ensure a safe workplace environment without risk to health.

- Ensure that all Health & Safety policies, procedures, rules and regulations are adhered to and are regularly reviewed, updated and communicated.

- Ensure the project site meets its statutory obligations in all areas pertaining to health, safety and welfare at work, including statutory training and reporting.

- Ensure the completion and regular review of risk assessments for all work equipment and operations.

- Review effectiveness of implemented improvements on an on-going basis

- Support audit process

Registered with Ministry of Manpower (MOM) as WSHO and have at least 3 years of post-registeration and practical experience relevant to road, tunnel and viaduct.

- Preferable with LTA and CONSTRUCTION experience

- Minimum 3 years WSHO experience

- Working hours from 8am to 6pm (Mon-Fri, Alt Sat)

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

• Mentoring the progress and utilities team involved in the variety of LTA/MRT project.

• Develop designs of wet & dry utilities, utilities diversion schemes according to different standards and requirements.

• Propose circuit and line on each utility agency.

• Management of NCE and trial trench works for locating existing utility.

• Coordinate with authorities, consultants, sub-contractors and project site operation team to facilitate installation works and progress on site.

• Responsible for managing all aspect of utilities coordination works planning and technical co-ordination of all services installation work scheduling for LTA/MRT Project.

• Manage & monitor progress, quality of workmanship and compliance with authority requirements to get an approval for water, drainage and other major utilities diversion.

• Positive working attitude.

• Meticulous and detailed in work.

• Able to start work in short notice.

• Working location nearby Boon Lay MRT.

• Minimum 5 years of Engineering experience with Degree in Civil Engineering recognized by PE Board or qualification acceptable to Commissioner of Building Control as eligible for application as Resident Engineer or Recognise Degree in the relevant field subject to the acceptance of the Engineer/Manager and at least 3 years of experience in the construction supervision for projects of similar scale and complexity.

Job Description & Requirements

1. JOB DESCRIPTION

Job Title :-

BIM Modeller/Drafter

Job Description & Requirements

Executive

Responsibilities:

· Assist in creating, updating, and revising BIM Models throughout the project life cycle

· Create and update BIM Models based on contract drawings and the latest information

· Ensure integrity/ quality of the models

· Generate documentation and shop drawings for BIM Models

· Produce BIM Model deliverables for Construction, documentation, and fabrication

· Develop BIM Models with the correct parameters and attributes for BIM Based qualification and 4D simulation

· Identify issues for BIM Coordinators where discrepancies occur during the design stage

· Prepare Shop Drawing and sketch for Construction and Design Development

· Mainly for Plumbing/Sanitary/Gas and Archi Drawing Work

· Able to use Microstation, Autocad Revit, Navisworks, AutoCAD MEP

Job Requirement:

· 2 years of relevant working experience in HDB/Commercial/Condominium/Landed Housing projects.

· Construction site working environment.

· Able to work independently and be committed.

· Well-versed in Revit

· Able to complete models, and shop drawings in a timely and quality manner Construction site working environment.

· Ability to read and understand architectural and structural construction documents

· Graduate of a qualified technical school or program

· Excellent time management skills

· Knowledge of Plumbing, Sanitary/ Gas Code of Practise or Building Civil/ Arch Works.

Job Description & Requirements

1. JOB DESCRIPTION

Job Title

Receptionist

Job Description & Requirements

Receptionist

Job Description

We are looking for a receptionist to be responsible for being the face of the office - greeting clients and visitors and general admin duty. You will be in charge of contacting employees regarding visitors, answering phones and taking messages, and sorting and distributing mail.

The candidate will need the following: flexibility is essential, as well as a willingness to assist with tasks, help solve unforeseen problems, answer queries etc. Good communication is an essential attribute as we will supporting an office of various nationalities.

General Duties:

Reception:

• Meet and greet visitors and notify appropriate staff of their arrival
• Answering / transferring incoming calls, helping with enquiries
• Ensure reception area is tidy and presentable, with all necessary stationery and material (e.g. pens, forms and brochures)
• Update calendars and schedule meetings
• Perform other clerical receptionist duties such as filing, photocopying and shredding

Admin:

• Post - sort and distribute mail to employees; process daily outgoing mail
• Facilities Management
• Take care of incoming and outgoing courier packages and other deliveries
• Order/manage pantry supplies
• Working together with the office cleaners to keep office and meeting rooms tidy
• Organize stationery orders and maintain stationery stock levels
• Assist with ad hoc tasks as required (i.e. buying lunch, running errands)

Qualifications:

Knowledge And Experience:

• Previous experience as an office receptionist is preferred

Qualification And Skills:

• English language proficiency
• Demonstrated ability to use initiative
• Ability to multi-task
• Ability to work well independently as well as being a team player!
• Eye for detail

Job Description & Requirements

Assistant Purchaser

Job Description & Requirements

1. Job Title :- Assistant Purchaser

Job Description & Responsibilities: -

· Handle day to day materials order from Site.

· Assist with evaluation of Quotation and preparation of Compairson documents.

· Liaise with Project Manager/Designated staff to valuate and clarify Materils/Tools specification for order.

· Assist in verifying sub-contractor claims.

· Prepare of monthly Project Total Order.

· Carry out contract administration duties.

· Preparing and assist in the Project Bill of Quantilty.

· Other ad-hoc duties as assigned from time to time.

· Perform Quantity take-off for supplies to quote.

· To prepare BQ, tender document, cost comparison for Management review including source, complies, evaluates etc

· Possess at least a Professional Certificate or related discipline in Building/M&E.

· Demonstrated good letter writing skills in respect of contract provision and external communication.

Job Description:

• Lead and mentor a team of engineers, fostering a collaborative work environment.
• Ensure effective communication within the team and across departments.
• Oversee planning, execution, and delivery of engineering projects within set timelines and budgets.
• Collaborate with cross-functional teams to align project goals with business objectives.
• Stay updated on industry trends and technological advancements.
• Lead the implementation of PM System using the current Process Control System, and ensuring PM activity is carried out during factory downtime at the correct frequency to an agreed standard.
• Provide technical guidance to address complex engineering challenges.
• Efficiently allocate resources, manage workloads, and prioritize tasks.
• Identify and address skill gaps through training and development.
• Implement and enforce quality assurance processes.
• Conduct regular code reviews to ensure adherence to standards.
• Collaborate with internal stakeholders for project success.
• Act as a bridge between the engineering team and other departments.
• Conduct performance evaluations and set performance goals.
• Identify career development opportunities for team members.

Job Requirement:

• At least Degree in Mechanical or Electrical Engineering
• Min 7 years experience in management of in engineering, project and maintenance management within food manufacturing industry
• Proven leadership experience in an engineering environment.
  Strong background in project management and delivering engineering solutions..
• Excellent communication and interpersonal skills.
  Ability to convey technical information to diverse stakeholders.
• Demonstrated abilities to inspire, motivate, and lead a diverse team.
• Strong problem-solving skills with a proactive and analytical approach.
• Ability to adapt to a dynamic and fast-paced work environment.
  Effective decision-making under pressure.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Jordan Fung Si Jong
EA Personnel Reg No: R23112945

Job Description:

1. Plan and coordinate administrative procedure

2. Assess staff perfromance and provide coaching and guidance

3. Monitor costs and expenses to assist budget preparation

4. Organise and supervise office activities

Educational Requirements:

- Degree / Diploma / A level

Job Requirements:

- Min. 3 years experience

- Working days per week: 5

- Working hours: 0830 - 1800 hrs

Roles & Responsibilities

Job Description

The Documentum Support Analyst reports to the COE lead and maintains responsibility in managing and supporting Organisation's global Documentum system. This position represents the module expertise for Documentum Capital Projects in MOPS, supporting ongoing projects which rely heavily on document exchanges with client's system. He/She will work closely with the Document Control Team in terms of technical support and ensuring services are delivered according to the IES service level agreement (SLA).investigate non-syncing issues and interpret for error messages for ‘’TIE’’ Web.
re-solve all system issues (Documentum and TIE web).
monitor DCP-TIE portal daily for any document exchange / transmission issues.
train new joiner on using Document CP, TIE Web, BOX.
attend client meeting & re-solve issues pertaining to technical errors.
review comparison report (PIMS, CP, STID) and to assign tasks to DC, IES or EQN.
engage AMS support team for Document enhancement request.
monitor BOX performance on a daily basis.
assist DC task (such as replacement file in CP).
send automatically via ‘’TIE’’ once ‘’Review Class Status’’ provided, ‘’Internal Review Completed’’ in PIMS.
have a monthly / weekly discussion with DC Team on new implementation in DCP or discrepancies in system.
provisioning of missing files (native, PDF, generated PDF) that are not uploaded in PIMS/STID during normal sync operation.
monitor Incoming / Outgoing CRS.
Complies with the HSEQ Code of Conduct as described in the HSEQ Policies, the 14 HSEQ Standards, and the HSEQ Procedures to protect people and the environment at all times. Has a duty of care to ensure that all personnel work in a manner that is not harmful to their own health and safety and the health and safety of others.
Complies with the Group Policy Code of Business Conduct and Ethics and expected training at all times
Requirements:Bachelor's degree in related field
5 years’ experience in Documentum and D2 with rollout and ongoing support.
Minimum 3 full life cycle implementation experience from design to go-live for Documentum and D2 modules
Strong communication and/partner skills with end users with non-technical background
Strong hands-on and support experience with Document CP 16.2 / 20.4
2 to 3 end to end implementation cycles experience and maintenance of global instance of Documentum D2/Capital projects (Prefer experience with version 4.6 D2 and Capital Projects version 1.10)
Excellent communication and interpersonal skills
Experience coordinating with onsite/Offshore team members
Must have hands on knowledge in implementing Documentum and D2 modules
Efficient in analyzing business requirements, needs and objectives and mapping them to
Documentum/D2 configurations
Basic knowledge of Documentum/D2 implementation, configuration, data/Documentmigration and cutover activities
Experience with preparing user training documentation, and test scripts
Must be a decision maker and problem solver, possess communication skills and service orientated

will be incharge of supervising and managing our company's daily operations. Ensuring seamless and effective operations for the organization, together with meeting customer expectations and strategic goals is the primary objective. Will be involved in organizing and planning a variety of operational tasks, including resource allocation, production, inventory control, and quality assurance. will evaluate procedures and pinpoint opportunities for development, putting plans into action to maximize effectiveness, cut expenses, and boost output. furthermore, operations managers will have significant impact on the management of connections with vendors, suppliers, and other outside stakeholders. In order to promote continous improvement, the operations manager will also be responsible for establishing and tracking key performance indicators (KPI's), assessing operational performance, and making data-driven choices.

Specific Responsibilities:

1.oversees the framework, systems, and procedures that are in use while searching for areas that could use adjustment or enhancement.

2. monitors and anticipates tactical and operational threats while offering strategic solutions.

3.oversees the day-to-day operations of the department while striking a balance between the duties of different business lines, including risk management, vendor relations, and business analysis.

4.assists in setting and achieving daily and quarterly goals with sales teams.

5.collaborates closely with COO on other departmental and specific planning initiatives.

6.monitors and provides monthly, quarterly, yearly, and weekly metrics.

7.Works along with other back office team members to support company principles, maintain positive morale, and guarantee smooth business execution.

8. Assists the onboarding team and transitions as needed.

9.builds and upholds reputable, expert connections with customers, internal departments, and outside suppliers.

10.works closely with the management team to guarantee that the company operational, administrative, and compliance responsibilities are all carried out correctly and in compliance with best practices based on regulations.

Technical Skills and Competencies:

1. LEADERSHIP SKILLS

2. COMMUNICATION SKILLS

3. PROBLEM-SOLVING SKILLS

4. ORGANIZATIONAL SKILLS

5. TIME MANAGEMENT SKILLS

6. INTERPERSONAL SKILLS

Duration of Traineeship/Attachment Offered - 6 months

• Mature Mid Career Individuals - $2,900

This Position is open for mid career individuals (Mature, 40 years and above).

Mid Crareer individuals from any qualifications level can apply.

Job Highlights

• Well versed in ISO 9001, QA metholodogies & tools
• Scope to innovate & develop continuous improvement processes

Job Description

• Develop & implement QMS system & take the lead of continuous improvement process & initiatives
• Provide root cause analysis & preventive action plans to resolve non-compliance issues
• Analyze internal & external data to identify areas for improvement & communicate with relevant parties for quality improvements
• Ensure the compliance with ISO 9001 & all relevant standards to both internal company policies & customer standards
• Maintains and implements the Quality Management System (QMS) for the organization.
• Manages Quality Assurance and Quality Control (QA&QC) by conducting audits for quality system conformance, and by liaising across departments to maintain good documentation control and management.
• Conducts investigations into inconsistent quality processes and non-conformance and recommends preventive actions to eliminate recurrences of such issues.
• Monitors product failure data and performance trends, and initiates remedial actions with relevant departments, where necessary.
• Identifies opportunities and prepares recommendations for continuous improvement in quality, productivity and cost efficiency.
• Handle Customer Complaint resolution, onsite & offsite
• Lead supervise OQA production lot acceptance and FAI submission team for achieving OTD objective.

Job Requirements

• Diploma/Bachelor Degree in Precision Engineering, Mechanical, Quality, Engineering or equivalent.
• Meticulous, thinks systematically and is able to work independently.
• Possesses good organization, problem-solving, interpersonal and communication skills.
• Good knowledge of Quality Management System and ISO 9001-2015. Certified Auditor will be a plus.
• Knowledge of LEAN Six Sigma and 8D Discipline methodology highly desirable.
• MS Excel, PowerPoint a MUST and ERP knowledge an advantage.
• Only Singaporean may apply.

Job Title: Bookkeeping and Admin

Job Summary:

The Bookkeeping and Administration Specialist will play a vital role in ensuring the smooth and efficient operation of our workshop. This position requires strong administrative skills, excellent time management, effective communication with customers and colleagues, and a minimum of 3 years of relevant working experience. A minimum diploma qualification in accounting, business (major in accounts), or equivalent is required.

Key Responsibilities:

Administrative Duties:

• Manage appointments, ensuring efficient scheduling of service appointments, and optimize workshop capacity.
• Prepare accurate service estimates, invoices, and work orders.
• Coordinate with technicians to ensure a seamless workflow and efficient allocation of tasks.
• Maintain detailed records of customer interactions, service history, and vehicle information.
• Process payments and handle financial transactions accurately.
• Order and manage the inventory of parts and materials as needed for vehicle repairs.
• Perform data entry and maintain both digital and physical records.

Customer Service:

• Greet customers warmly and assist them in assessing their service needs.
• Listen to customer concerns, requests, and descriptions of vehicle problems.
• Assist technicians in conveying accurate and clear explanations of repair and maintenance services, estimated costs, and timelines to customers.

Qualifications:

• Minimum of 3 years of relevant work experience in bookkeeping and administration.
• Diploma qualification in accounting, business (major in accounts), or equivalent.
• Strong administrative and organizational skills.
• Excellent time management and multitasking abilities.
• Effective communication and interpersonal skills.
• Proficiency in using accounting software and computer applications.
• Attention to detail and accuracy in financial transactions and record-keeping.
• Ability to work in a fast-paced automotive workshop environment.
• Willingness to learn about the automotive industry.
• Commitment to providing exceptional customer service.

We offer competitive compensation and benefits, including ongoing training and development opportunities in the automotive car care industry. If you are a dedicated professional with the required qualifications and skills, we invite you to apply for this position.

To apply, please send your resume and a cover letter outlining your relevant experience and qualifications. Please include "Bookkeeping and Admin Application" in the subject line.

Position: Electrical SiteSupervisor

Responsibilities:

• Supervising and overseeing the direction of the project, ensuring that the client’s specifications and requirements are met, reviewing progress and liaising with quantity surveyors to monitor costs
• Responsible for general on site technical and engineering matters
• Liaise with Sub-Contractors & Consultants, Client and other construction professionals and, sometimes, members of the public
• checking and preparing site reports, designs and drawings
• maintaining quality control procedures
• Overall projects planning, schedulling, monitoring and updating to meet targets.
• Ensuring & assessing site safety to minimizing risk
• Other adhoc assigned

Requirements:

• Candidate must possess at least Secondary School or above qualifications such as Diploma, Advance Diploma in Engineer / Building
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably candidate specialized in Electrical Engineering
• Teamwork and good interpersonal skills.
• Will be based at Tuas Site
• Salary will commensurate with experience.

Responsibilities –

1) Identify new business opportunities, including new markets, new clients, new partnerships

2) Build relationships with new clients, gauging their needs and developing proposals to address these needs

3) Promote the company’s services to prospective clients

4) Participate in collaborative business meetings to update key stakeholders

5) Interact with clients and respond to important inquiries about the company’s products or services

6) Build corporate brand through award submissions and create publicity opportunities through award wins

7) Lead in PR monitoring and measurement including measuring and tracking the value of and return of PR and communication initiatives

8) Ensure the company is communicating the right messaging to attract prospective customers and retain existing roles

9) Keep abreast of new-to-market / commercial market development and initiatives and recommend new ideas / prospects for implementation

10) Provide Management reports and budget forecasts for monthly & quarterly reporting

11) Possess a strong understanding of the company’s product and services, the competition in the industry and positioning

12) Ad hor projects being assigned by your immediate superior

Requirements

1) Bachelor Degree in Construction Management, Civil Engineering, or equivalent

2) Minimum of 10 years of experience in a related industry

3) A strong strategic and business mindset

4) Outstanding communication, interpersonal, and conflict resolutions skills

5) Exceptional executive presence, business acumen and presentation skills

6) Financial management skill with proven ability to manage budgets

7) Team player who values building strong working relationships with stakeholders and colleagues at all levels within the organization and with external parties