• Provide hands-on support to engineers at site locations during the installation of our heat removal solutions, along with the installation and configuration of electrical components.
• Assist with routine maintenance tasks and troubleshooting of electrical issues on ongoing projects.
• Troubleshoot and resolve technical issues and provide support to Project Engineers when required.
• Monitor and report on project progress to all relevant stakeholders.
• Ensure compliance with applicable health, safety, and environmental regulations at project site.
• Participate in site audits and suggest areas for improvement.

Requirements:

• Diploma in Electrical Engineering or a related field.
• Previous experience as an Electrical Technician, ideally within a data center or similar environment.
• Familiarity with various electrical systems and equipment.
• Proficient in using electrical diagnostic tools and equipment.
• Demonstrated ability to diagnose and repair electrical problems.
• Excellent communication, interpersonal, and presentation skills, with the ability to collaborate effectively with team members, clients, and external partners.
• Strong analytical and problem-solving skills, with a keen attention to detail.
• Ability to work independently and manage multiple priorities in a fast-paced environment.

As an Air Conditioning Repair & Servicing Technician, your main duties is to service, troubleshoot and repair air conditioning systems to ensure optimal performance and indoor air quality. This role involves diagnosing issues, performing repairs, and conducting routine maintenance to enhance system efficiency and customer satisfaction.

Job Description:

• Collect the spare parts from the warehouse store based on the daily job indicated on the tablet.
• Troubleshoot and resolve issues on malfunctioned HVAC systems.
• Wash and clean all dismantled parts to improve efficiency and air quality.
• Refill refrigerants by replenishing and fixing leaks as needed.
• Communicate with clients with regards to problems in equipment and post-jobs reports.
• Ensure safe-keeping of hand tools and maintain good housekeeping.
• Must wear personal protective equipment (PPE) when necessary (e.g. googles, earplugs, respirators, safety harnesses, safety shoes, helmets, sunscreen).
• Ensure all works are carried out safely in accordance with safety procedures and practicing of Workplace Safety and Health (WSH) Act.
• Provide technical advice and assistance on all maintenance functions.
• Prepare service reports after every completed job for customer's endorsement.
• Handle any ad-hoc projects and duties assigned by reporting manager and/or management.

Job Requirements:

• Possess a Singapore Class 3 license will be an added advantage.
• Minimum Nitec / NTC 2 or 3 certificates in Electrical, Mechanical or Electronic field.
• At least 1 year of working experience in the related field; with maintenance experience in HVAC, refrigeration & M&E systems.
• Positive attitude, good interpersonal & customer-centric skills.
• Experience in air-conditioning repair & maintenance.
• Strong knowledge/experience in HVAC or ACMV systems for residential or commercial sectors.
• Ability to work independently and collaboratively in a team.
• No experience is also welcome to join as apprentice.

Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

1. Knowledge in Electrical and Electronic Systems.
2. With I.T. computer and programming knowledge.
3. Work with Project Team.
4. Support installation, maintenance of equipment / systems on-site.
5. Preferrably with Class 3 driving license.
6. Hardworking with good team work.
7. Can work independently with minimum supervision.

Responsibilities:

Information Technology

• Provide first level IT helpdesk support to entity staff and interface technical IT issues to HQ IT engineers to ensure smooth business operations
• Upgrading, installing, and configuring new hardware and software to meet company objectives
• Maintain user accounts, licenses, data backups, etc. IT administrative functions in various in-use systems and devices
• Manage IT asset inventory
• Ad-hoc tasks and projects as assigned by management

Office Administration

1. General office administrative support, upkeep and maintain office supplies
2. Work under leadership of Operations head, organize company events, coordinate all department HODs, organize meeting and take minutes
3. Monitor, follow up and update projects progress
4. Consolidate and compile various department reports
5. Source, procure & maintenance of office equipment and supplies
6. Other administrative responsibilities, as applicable

Requirements:

• Diploma in Information Technology or equivalent
• Minimum 3 years IT support working experience in end-user desktop, networking, server, hardware device and software topics
• Good understanding and possess troubleshooting know-how on IT infrastructure and software.
• Extensive experience with IT systems, networks, and related technologies.
• Solid knowledge of best practices in IT administration and system security.
• Ability to work both independently and in team
• Strong analytical and problem-solving skills
• Excellent interpersonal and communication skills
• Handle sensitive information in confidential manner
• Positive working attitude, strong attention to details and proactivity
• Strong stakeholders focus and service-oriented mindset

Duties & Responsibilities

• Provide support, troubleshooting, maintenance and repair of PCs, Laptops and mobile phones.
• Including SMD repairs such as re-balling, soldering, reflowing of I/Cs, transistors, capacitors and other components/chipsets on a Motherboard.
• Resolve software issues using established SOPs.
• Research new methods, both hardware and software to resolve common problems or troubleshooting common problems.
• Ensure daily cleanliness of the technical department.
• Ensure proper use of tools issued.
• Ensure proper use and maintenance of machines, tools and gadgets.
• Adapt to changing technologies and learn functionally of new laptop and phone application.
• Any other ad-hoc projects and duties as assigned by report manager and/or management.

Requirements

• Customer oriented with good communication skills
• Must be able to speak, read and write English to communicate with English-speaking customers
• Preferably with a customer service experience to service customers with products/services.
• Preferable have experience on troubleshooting, repair and dismantle of computers and notebooks. Replace harddisk, LED screen and motherboard.
• 6 day work week
• Working Time: 12noon to 9pm

Free shuttle Bus from Choa Chu Kang MRT & Yew Tee MRT to Gain City Megastore @ Sungei Kadut

Purpose

Operations Technician / Senior Operations Technician:
The incumbent operates all equipment and facilities in his assigned area safely and efficiently and keeps the same in good state of maintenance. He works
closely in a team, keeping in close contact and in particular, highlights all items bearing on safety, quality and efficiency.

Senior Operations Technician:
The incumbent is primarily responsible for smooth, safe and efficient operations of assigned process stages. He ensures associated facilities are kept in
good maintenance. He assists the production superintendent in giving work directions to technicians and deputies for the superintendent from time to time.

Key Responsibilities

• Performs batch / unit or ancillary operations safely and efficiently following standard operating procedures and as necessary, leads technicians in unit operations. Takes in process samples and carries out checks using analytical instruments.
• Do routine mechanical and lubrication checks and where required, carries out early maintenance and repair using hand tools.
• Performs materials handling and movement using hand-pallet trucks, reach truck or other material handling equipment in a safe manner, following standard operating procedures.
• Ensures that batch and operating log sheets are correctly recorded and complied.
• Follows Good Documentation Practices and ALCOA+ principles when executing instructions and recording data, and adheres to Document Error management procedures if document error is observed
• Communicates clearly with his superintendent and colleagues and at the end of his shift, hand-over to his senior operations technician highlighting production status and any items bearing on safety, quality and efficiency.
• Do engineering-related work with technicians during process runs, plant configuration during the campaign change over or maintenance using hand-tools. E.g.: filters change, equipment replacement and other plant-care type engineering work. Prepares plant and equipment for engineering maintenance.
• Inspects and maintains house-keeping of his assigned area for clean and safe working conditions as well as ensuring that personal protection equipment, safety and fire-fighting equipment are maintained ready for use.
• Carries out fire fighting / first-aid duties as assigned and trained.
• Perform plant trouble shooting using appropriate problem solving tool to minimize plant stoppages and safety or quality incidents.
• Raise improvement ideas and implement initiatives to support department objectives.
• Carries out other related duties as assigned by the superintendent, production leader or senior technicians.

Why you?

We are looking for professionals with these required skills to achieve our goals:

• Diploma in Mechanical Engineering
• Minimum 2 years of experience in pharmaceutical API plant
• Experience in maintaining and operating production and utility equipment

Technical

• Familiar with good manufacturing practices, safety procedures
• Trouble shooting skills
• Basic awareness of industrial standards
• Good knowledge in maintenance and operating principles of production and utility equipment
• Plant inspection skills (for Superintendent deputy role, as needed)
• Good knowledge of Permit-to-Work systems and Risk Assessment (for Superintendent deputy role, as needed).
• Correct documentation errors in accordance to existing procedures

Business

• Good communications skills

Competencies

• Ability to work as a team
• Problem solving skills
• Analytical thinking skills
• Planning and Organisation skills
• Leadership skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why Us?

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organization where people can thrive. Getting ahead means preventing disease as well as treating it, and we aim to positively impact the health of 2.5 billion people by the end of 2030.


Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

JR: 389406

The Responsibilities

• Serve as the first point of contact for users/customers seeking technical assistance over the phone or email.
• Provide technical assistance and resolve 1st level problems with network and computer system through diagnostic techniques and pertinent questions.
• Desktop support for internal staff - support iPads, printers and software.
• Direct unresolved issues to the next level of support personnel.
• Follow-up with users/customers to ensure full resolution of issues.
• Diagnose system errors and other issues.
• Account management for Microsoft Active Directory.
• Administration of Office365 - Diagnose, troubleshoot and/ or support.
• Manage, track and asset inventory of hardware/ equipment.
• Participate in hardware and software rollouts.

The Requirements

• NITEC or Diploma qualifications in Computer/Electronics/Electrical Engineering of relevant experience.
• Professional certificate such as CompTIA A+ is a plus.
• Highly self-motivated, directed and attention to details.
• Proven analytical and creative problem-solving abilities.
• Able to prioritize and execute tasks in a timely manner.
• Ability to work in a team-oriented, collaborative environment.
• Candidate must be able to commit for 9-months contract.

Descriptions

• Perform automation machine assembly, commissioning and installation.
• Handle, analyze and resolve machine issues during testing.
• Operation of Facilities equipment.
• Perform preventive and corrective maintenance of Facilities system when needed.
• Organizes repair works according to the schedule of the department job allocation.
• Supervises group of workers to perform mechanical jobs and gives guidance.
• Response to operations/equipment issues
• Support all manufacturing and related areas, ensuring smooth operations and uphold environment safety
• Support to execute document change when needed
• Ad hoc assignment by Supervisor

Requirements

• At least 2 Year(s) of working experience in machine mechanical part assembly.
• Ability to read and interpret electrical and mechanical drawing.
• Possess good communication and interpersonal skill
• Able to generate simple reports.
• Ability to work independently and with all levels.

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

Provide support to staff on all company supported hardware and end-user computing software. Troubleshoot hardware and software issues, and advice on appropriate action. Assist in project-based activities.

Job description

• Take an aggressive approach in proactively supporting all staff in the base location, collaborating with IT Organization to ensure that staff is operating effectively from an IT support standpoint
• Work closely with Service Desk to expedite technical problem resolutions, address users’ queries and follow-throughs
• Partner with Local IT Project Team in providing infrastructure service, new customer startups, internal project including technical investigation and documentation, testing and execution, etc.

Job requirements

• Minimum Diploma in Information Technology
• Preferably, IT-Certification in Microsoft Tools
• At least 1 year of technical knowledge on Microsoft Tools
• Customer service experience and Logistics Business Knowledge is an advantage
• Expected to perform any other tasks as deemed necessary by IT Team Leads

Personal Attributes

• Proactive, being engaged and possess a positive learning attitude
• Analytical in technical problem-solving
• Effective communication skills to work with broad user base; verbal (phone etiquette) and written
• Good interpersonal skills to work independently with IT groups and cross-functional business groups
• Ability and willing to learn and support new and diverse hardware, software etc.

JOB TASKS AND SPECIFICATION

1. Installing and configuring computer hardware, software, systems, networks, printers and scanners.
2. Monitoring and maintaining computer systems and networks.
3. responding to technical support calls from end users int a timely manner to service issues and requests.
4. Providing technical support across the company (this may be in person or over the phone).
5. Create and Modify user accounts in Windows Active Directory & Office 365.
6. Repairing and replacing equipment as necessary.
7. Testing new technologyPossibly training more junior staff members
8. Setting up and installing new computers, networks and software.
9. Installing updates, known as patches, firmware, to hardware and software applications.
10. Installing and configuring operating systems, anti-virus software and other applications such as Microsoft Office.
11. Diagnosing and fixing network problems and hardware or software faults.
12. Maintaining inventories of hardware and software.
13. Keeping a record of issues and faults along with solutions, for future reference.

JOB REQUIREMENTS

• Minimum Diploma /ITE or any Tertiary education related to IT.
• 3-5 years of proven experience in a heavy customer focus position involving and technical knowledge of a companies' products and services Knowledge on Data / Voice Networking is advantageous.
• Comfortable working and assisting others through company help desk software, such as service desk in addition to other remote access desktop programs.
• Extensive experience working with different operating systems including Windows and Linux.
• Time-management skills and the ability to establish reasonable and attainable deadlines for resolution.
• Ability to prioritize and manage several milestones and projects efficiently.
• Professional written and interpersonal skills are essential when communicating with customers and clients.
• Experience in installing and configuring computer systems and applications for a large company.
• Ability to accept constructive criticism and customer feedback regarding their experience with software or IT services.
• Possess effective communication skills.

Remuneration shall commensurate with relevant work experience.

Thank you for your interest in Y3 Technologies.

We regret that only shortlisted candidates shall be notified.

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

1) Carry out production, packaging and machine operation duties

2) Ensuring the smooth and efficient running of machines with target

3) Feed raw material or parts to machines

4) Inspect parts with precision and measuring tools

5) Keep records of approved and defective units or final products

6) Maintain activity logs

7) Maintain and clean machines periodically

8) Follow established safety rules and regulations

9) Perform any other assignments assign by HOD

• Provide maintenance for all production machines / equipment in our factory.
• Assess and analyse current production methods, develop and draft improvements for the production process.
• Design development plans to increase the speed and efficiency of processes without compromising quality of poultry products.
• Develop and implement quality control measures to maintain the equipment and guarantee desired results.
• Diagnose origin of machines / equipment breakdowns, including human error, and troubleshoot problems.
• Communicate with relevant stakeholders to obtain materials or tools needed for maintenance of machines / equipment.
• Follow and ensure that all machines / equipment adhere to state, federal and company enforced safety rules and regulations
• Inspect and maintain all machines / equipment and prepare weekly maintenance report for the management.
• Other ad-hoc activities assigned by management.

The Diving Technician is responsible for the repair, maintenance and working performance of all diving life-saving equipment, machinery and tools. The dive technician will work closely with the other maintenance personnel and report directly to the Fleet Manager. His duties and responsibilities are (but not limited to):

1. To carry out the repairs and maintenance of all diving life-saving equipment, machinery and tools and to ensure that they are ready for use as and when required

2. ⁠To immediately report to the Fleet manager any diving life-saving equipment failure that will affect diving operations. To be ready to provide feasible solutions and rectify the issues.

3. ⁠To carry out all work in compliance with national regulations and where required, to international codes of practice and best practice at all times.

4. ⁠comply with Company’s safety standards, procedures and practices whilst at work at all times.

5. ⁠To ensure Risk Assessments and SOPs are followed for all work.

6. ⁠To be prepared to travel out to sea when required to repair equipment on site

7. ⁠To ensure all diving life-saving equipment, machinery and tools, and any other related equipment are routinely maintained, tested and in-dated in accordance with the Planned Maintenance System

8. ⁠To accurately log and update all repairs and maintenance in the PMS program when carrying out such works

9. ⁠To ensure all planned and unplanned maintenance are carried out by safe work processes.

10. ⁠To provide any support for the overall operations of the warehouse, office facilities and property maintenance if required

11. ⁠To manage, store and control hazardous materials in compliance with local regulations

12. ⁠ To ensure the diving life-saving equipment, spare parts and consumables inventory is updated, maintained and accurate at all times.

13. ⁠To report stock levels and carry out the control, issue and return of diving life-saving equipment, consumables and spares.

14. ⁠To ensure the diving life-saving equipment annual audit is conducted and any non-conformances closed out.

15. ⁠Fully understand and implement the procedures and working practices as laid down in the company manuals and other documentation.

16. ⁠To carry out any task in line with the position role and responsibility and on mutual agreement between employer and employee.

I.T. Executive

Role:

· IT executives provide technical support to users experiencing hardware, software, and networking issues. They work on-site or via remote systems to assist with software installations, network failures, hardware malfunctions, and other IT-related matters. The candidate should also have an interest in process automation and digitalization.

Responsibilities:

· Work onsite or via remote access systems to assist with software installations, network failures, hardware malfunctions, other I.T. related matters.

· Evaluate and/or recommend the purchase of computers, network hardware, peripheral equipment, and software.

· Diagnose and resolve hardware, networking, security, ERP (Microsoft Dynamics), WMS, mobile applications (Sales Force Automation), website update, or other IT-related issues quickly and effectively.

· Ensure productivity gain via usage of automation of respective tasks.

· Responsible for IT support for IT issues that need hands-on support such as hardware problem diagnostics, PC/Software installation, configuration, maintenance of operating systems, etc.

· Ad-hoc duty assigned and other IT-related matters.

Requirement:

· Candidate must possess at least Nitec or Diploma in any IT related.

· At least one year working experience in an IT role. Exposure to FMCG or distributor industry is highly desirable.

· Having experience in ERP system, WMS system, Microsoft Azure, Power Apps, SQL, Qlik is an added advantage.

· Good knowledge of Office 365 related applications (Outlook, OneDrive, Microsoft Teams, etc.)

· Passionate about converting manual process/document to digitized versions.

· Positive working attitude, Innovative, Disciplined, Result Oriented, Agile, Work effectively with each other, Accountable.

Responsibilities:

• Operate conventional cylindrical grinding machines

• Carry out grinding process for external or internal cylindrical surfaces.

• Read and interpret technical drawings.

• Determine grinding speeds, feed rates, holding fixtures, and grinding wheels to be used.

• Mount grinding wheel.

• Dress wheel according to specifications.

• Confirm ground work piece has the correct specifications.

• Change worn grinding wheels.

• Check grinding wheel.

• Utilize micrometers, calipers, and preset gauges.

• Any other tasks as and when assigned by superior or management

Requirements:

• Minimum ITE certificate or ‘O’ Level

• 2~3 years of cylindrical grinding experience

• Candidate with crankshaft grinding skill or experience will be added advantage

• Able to operate manual machining tools, read blue prints or engineering drawing

• Use of measuring instruments in the performance of daily duties

• Good work attitude and regular in attendance

• Good team player

• 5-day work week

Job description

· Oversee and manage the HR & Administration and IT team and functions

· Develop and implement HR & IT strategies aligned with the company's overall business objectives.

· Work closely with leadership to anticipate and address organizational needs through workforce planning, talent acquisition, and succession planning.

· Develop and execute strategies for talent development, performance management, and employee engagement.

· Oversee the development and update of HR & IT policies and procedures in line with best practices and legal requirements and ensure compliance with legal requirements and maintain accurate HR records while ensuring data security.

· Lead the recruitment process and implement effective onboarding programs to facilitate seamless integration of new employees to enhance post-hire success and talent retention.

· Manage employee relations, offering conflict resolution guidance, while also implementing and enforcing HR policies and procedures to foster a positive work environment.

· Oversee compensation and benefits programs to ensure the company's pay structure is competitive and aligned with industry standards.

· Closely supervise the development and implementation of performance management and employee retention strategies.

· Plan an appropriate schedule and initiate performance reviews for Directors. Prepare the necessary documents and dates for the discussion and develop performance improvement plans when necessary.

· Thoroughly assess the company's business environment, engage in active discussions with managers to identify training requirements, and design training programs.

· Implement initiatives and provide support for employee growth and career development.

· Foster a culture of open communication, employee recognition, and proactive addressing of employee concerns and feedback.

· Oversee administrative functions, including facilities management, office operations, and vendor relationships.

· Oversee the optimization of the IT infrastructure, including networks, servers, and cybersecurity measures.

· Exercise leadership in the operation of HR & Administration & IT team, serving as a mentor and providing support to subordinates.

Job requirement

· A bachelor’s degree or diploma in HR, Business, or a related field.

· Proven experience as an HR & IT leader, with at least 7 years in a senior management role.

· Minimum 7 years’ experience in food-related industry dealing with cream & margarine, oils & fats and plant-based foods.

· Possess a deep understanding of employment laws and regulations, coupled with excellent interpersonal skills, effective team management capabilities.

· Proficiency in problem-solving and conflict resolution, demonstrating the ability to maintain professionalism and personal accountability.

· Exhibit the capacity for strategic HR planning aligned with organizational goals, ensuring the alignment of HR practices with the company's overall objectives.

· Able to communicate in both English and Japanese to liaise with Japan stakeholders

You will be part of an IT infrastructure Support Team managing mission critical high-tech biometrics devices at critical locations of significant national interest. You will be trained to manage, troubleshoot and maintain the operational availability of these devices and to remedy faults to prevent operational down-time.

As a IT Support Engineer, you will be responsible for the following :-

• Assist the project teams with setting up, installing, and configuring operating systems, applications, and peripheral devices for PCs/Workstations.
• Provide first level on-site IT support to end-users on a 24x7 rotational shift, including weekends and holidays.
• The successful applicants should be prepared to be deployed primarily at Tuas Checkpoint. The successful applicant could be deployed to Tuas checkpoint in future on a rotational basis.
• Provide findings and timely status update to the Project Manager on major issues escalated by users.
• Perform daily health check and inventory check on system.
• Experience in installing, configuring, and troubleshooting PC/peripheral devices and providing application maintenance support is necessary.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required.

• Having prior exposure to IT operational environments is advantageous.
• A strong Team player with the ability to collaborate and willingness to support one another.
• Communicates well and has good interpersonal skills.
• independent and has ownership of his/her assigned tasks.
• Certification in Nitec, Higher Nitec or Diploma, ideally with a focus/specialization in IT.
• Have keen interest in IT Service Management
• Willing to work on rotations.

In the course of your tenure as IT Support Engineer, you will learn and acquire the following:

• Experience in installation, configuration, troubleshooting of biometrics devices as well as the maintenance of related software applications.
• Hands-on experience in supporting high-tech devices in Windows (Windows clients) environment/platform.
• Understanding of IT Service Management where SLAs (service-level agreements), KPIs (key-performance indicators) need to be managed and adhered to.
• Familiarity with the fundamental scope of work typically delivered in IT Support Services.
• Ability to work under time-sensitive situations.
• Career progression to Lead a team in providing IT Support Services.

Surface Preparation Engineering Pte Ltd is a leading surface technology machinery and equipment engineering company specializing in the design, manufacturing, and assembly of high-quality machinery components and systems for surface preparation applications. With a commitment to precision, innovation, and customer satisfaction, we deliver cutting-edge solutions to various industries including automotive, aerospace, marine, and manufacturing.

Position Overview: We are seeking a skilled and detail-oriented Machine Assembly Technician to join our dynamic team. The Machine Assembler will be responsible for assembling, fitting, and adjusting mechanical components to ensure the accurate and efficient operation of our machinery. The successful candidate will have a strong mechanical aptitude, excellent attention to detail, and the ability to work effectively in a fast-paced manufacturing environment.

Key Responsibilities:

Read and interpret engineering drawings, schematics, and technical specifications to assemble machinery components accurately.

Assemble mechanical components such as gears, bearings, shafts, and housings according to assembly instructions and quality standards.

Perform fitting, alignment, and adjustment of parts to ensure proper functionality and performance of machinery.

Install and connect electrical components, sensors, and control systems as required for machine operation.

Inspect assembled components and finished products to ensure they meet quality standards and specifications.

Troubleshoot mechanical and assembly issues as they arise during the assembly process.

Collaborate with engineering, manufacturing, and quality assurance teams to resolve technical issues and improve assembly processes.

Maintain a clean and organized work area, adhering to safety protocols and regulations at all times.

Participate in training programs and continuous improvement initiatives to enhance skills and knowledge related to machine assembly techniques and technologies.

Follow company policies, procedures, and guidelines to ensure efficient and effective assembly operations.

Qualifications:

High school diploma or equivalent; technical certification or vocational training in mechanical engineering or a related field preferred.

Proven experience in machine assembly, mechanical fitting, or a similar role within a manufacturing environment.

Strong mechanical aptitude and ability to use hand tools, power tools, and precision measuring instruments effectively.

Proficiency in reading and interpreting engineering drawings, schematics, and technical documents.

Familiarity with electrical components, wiring, and basic electrical systems is an advantage.

Excellent attention to detail and ability to work with precision to meet quality standards.

Strong problem-solving skills and ability to troubleshoot mechanical and assembly issues effectively.

Good communication skills and ability to work collaboratively in a team environment.

Commitment to workplace safety and adherence to safety protocols and regulations.

Joining Surface Preparation Engineering Pte Ltd as a Machine Assembly Technician offers an exciting opportunity to contribute to the manufacturing of cutting-edge machinery while working in a collaborative and innovative environment. If you have the skills, experience, and passion for precision engineering, we invite you to apply and become a valuable member of our team.

Our client is a well established Healthcare & Laboratory Equipment company. They are currently looking for a QC Laboratory Technician to join their expanding team.

Salary: up to Basic $3,000 + Transport Allowance $150
Work Days: 5 Days (8am to 4:45pm)
Work Location: Boon Lay (near Boon Lay MRT Station)
Work Terms: Full-Time Permanent

Responsibilities:
• Ensure all laboratory tests are well managed and performed including testing on raw materials, intermediates and finished products.
• Ensure all laboratory instruments and equipment are maintained and calibrated.
• Manage the inventory of quality reference materials such as QC reagents and lab consumables.
• Prepare daily QC report, relevant work instructions and validation protocol or reports.
• Ensure documents and quality records are maintained for easy retrieval.
• Manage operations towards timely support to meet factory analytical request.
• Develop training to build quality and safety awareness.
• To maintain cleanliness of laboratory and glassware.
• Handle administration work of factory when required.

Requirements:
• Min Nitec / Diploma in Chemical Process Technology or equivalent
• 1 to 2 years experience in handling wet chemistry and laboratory management
• No colour blindness and willing to stand while doing lab work
• Strong troubleshooting skills with various analytical instruments
• Good verbal and written communication and interpersonal skills
• Positive working attitude with sense of urgency
• Able to work independently as well as an effective team player

Please submit your resume in MS Word format to [email protected]

Please remember to include your
1) Recent photo
2) Salary information
3) Notice period

UNITED PERSONNEL SERVICES
21 Bukit Batok Crescent
#11-74 WCEGA Tower
Singapore 658065
Tel: +65 6565 1939
www.united-personnel.com

EA Licence Number: 05C5278
Registration No.: R1103477

(All applications will be treated in strictest confidence. We regret that only shortlisted candidates would be notified)

Job Description & Requirements

• We look for technicians who can handle various GPS installation and customer management
• Electrical background with installation of various electrical and electronics items
• Experience in installation of GPS Devices in various vehicles
• Hands on experience in technical know-how of Teltonica devices and firmware
• Exposure to EV vehicles and their electrical diagrams
• Installation knowledge on CCTV / Door access devices etc
• Experience in Solar devices is a plus
• Provide Desktop support to users
• Knowledge in Phone systems, Server management is a Mandatory.

The incumbent shall be responsible for, but not limited to the following scope of tasks and duties:

1. Carry out all preventive, predictive and corrective maintenance as directed by the Supervisor and clear completed work from the CMMS data base.
2. Responsible for the proper maintenance on various rotating and static equipment and systems including the plant piping systems and structural support systems.
3. Response and resolve work orders for any mal-functioning for static and rotating equipment in the facility. Ensure minimum down time or timely repairs of production equipment.
4. Determine materials, spares, tools and method required to complete maintenance task safely.
5. Plan and execute machinery condition monitoring and field data collection with production team and engineers.
6. Ensure all plant valves are fully operational and all mechanical components properly grease and lubricated where applicable, including carry out, strip, redress and rebuild of various types of control and plant valves.
7. Supervise and work closely with in-house contractor and equipment vendor to execute maintenance work at the terminal. Ensure safeguards are followed such as valid work permit are issued, wearing prescribed personal protection equipment etc.
8. Liaise with production team with all aspects of mechanical system testing, running, trouble-shooting, carry out material specification checks on all installed piping components such as gasket, bolts, etc.
9. Able to take on additional tasks or responsibilities as assigned by superiors.
10. Able to perform valve line up & LOTO for operations or maintenance preparations.
11. The incumbent shall be part of the Company's Emergency Response Team(CERT) and perform any assigned roles and responsibilities (ie fire fighter etc) for such purposes.

Work Experience

1. Minimum of 3-5 years practical experience in the oil and petrochemical refinery.
2. Experience in hands-on troubleshooting of mechanical/ machinery systems i.e compressor/pump and diesel/gas engine.
3. Familiar with Permit to Work system and local codes, regulations and standards requirement.
4. Proficient in usage of Microsoft Office and trained in the use of the Computerized Maintenance Management System (CMMS); ie SAP.
5. Ability to speak, write and communicate effectively in English.
6. Experience with LNG/Natural Gas or gas engine generator maintenance and operations will be an added advantage.
7. In addition, successful candidate should possess the following personal attributes:

• A team player who can work well in a team and with good listening skill
• High self-motivation with the ability to work with minimal supervision & adapt to changing priorities and assignments.
• Willing to take up new challenges and responsibilities
• Fast learner

Education Requirement

The candidate must possess a Professional Certificate/NiTEC, Diploma in Engineering (Mechanical/ Mechatronic/ Electromechanical) or equivalent.

• Provide IT support services for end users on IT related issues to resolve for software as well as Hardware by troubleshooting or coordinating with vendor support services.
• Knowledge in user profile configuration with required applications.
• Knowledge in hardware like laptops, computers, printer, scanner, and network devices, etc.
• Knowledge in software like Windows OS, office 365 email, share point, antivirus client, VPN and adobe acrobat, etc.
• Ability to Manage servers, storage, network equipment for access management inclusion of Active directory, File Servers etc.
• Ability to manage new IT projects and well coordination with vendor team for delivered on time, within budget, and meeting stakeholder expectations.
• Ability to manage the peripherals requirement planning, purchase initiation and vendor coordination.
• Ability to quickly Comprehensive understanding of QC laboratory standalone connected instruments and Chromleon connected systems for operation of instruments and application.
• Knowledge in backup and restoration process with support of backup applications.
• Any other activities as and when assigned by the Superior.

REQUIREMENT

• Effective communication and interpersonal abilities, including the ability to communicate technical concepts to non-technical stakeholders.
• Bilingual in both English and Mandarin (including read, speak and write).
• A good team player with positive learning attitude.
• Able to work independently with minimum supervision.

EDUCATION & EXPERIENCE

• Minimum Diploma or Degree in computer science, information technology or relevant discipline.
• Preferably with at least 5 years’ relevant experience in IT management, or digital transformation in Pharmaceutical manufacturing industry.

Candidates are encouraged to apply this position via email to [email protected] with the following information in the resume,

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.