· Lead in the preparation of detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Lead in the coordination with other disciplines in preparation of design deliveries.

· Lead in preparing tender documentations.

· Participate in the tendering of projects.

· Participate in the successful delivery of projects.

· Training and mentoring juniors.

· Design management, coordination and project control on major projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· A minimum of 5 years of design experience.

· Conversant with local codes and authority submission procedures

· Excellent interpersonal, good written and verbal communication skills

· Have good knowledge of common structural design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures)

· Good project management skills and strong analytical skills

· Able to work under pressure with good time management skill

Geotechnical:

- Experienced in the design and design management of major earth retaining and stabilizing structures, deep foundations, reclamations, ground improvements, slope stabilities.

- Familiar with the preparation of Geotechnical Interpretative Reports.

- Familiar with the geotechnical impact assessment of structures and instrumentations.

- Familiar with the application of geotechnical FEM software.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description:

• Carry out general cleaning and maintain cleanliness using appropriate materials, products, and tools inside/outside the premises compound as scheduled, including toilet cleaning.
• Organize/prepare uniform to send for/come back from the laundry.
• Refill hair net & and face mask in the changing room
• Maintain and ensure safety measures are adhered to during the operation
• Monitor the cleaning supplies are replenished, reinstated and maintained.
• Any other duties as and when assigned.

Requirement:

• Physically fit to carry out cleaning duties such as dusting, wiping, sweeping, mopping, handling and disposing of waste.
• Punctual, responsible, good working attitude, good team player and able to work in a fast-paced environment with minimal supervision
• Applicants with WSQ certification in basic food hygiene is a plus.

Job Highlights

• Job Types: Part-time, Contract, Permanent
• Working Hours: Mon to Fri 7.30 am to 4.30 pm, Sat 7.30 am to 11.30 am.
• Great learning development opportunities.
• Work-Life Balance and positive/friendly working environment.

(Only shortlisted candidates will be notified)

• Assist Head Chef and senior Chefs with creation and preparation of all products.
• Ensure production and kitchen is kept at the highest hygiene and food safety standards and products are of the highest quality.
• Ensure that quality of products displayed are as per company’s and Head Chef’s standard.
• Check that quantity and quality of items ordered are received and stored in proper condition.
• Work closely with Head Chef and colleagues to achieve highest possible satisfaction of products and customer satisfaction.
• Ensure the proper usage of food and minimise food waste.
• Ensure supplies, equipment purchases, and inventory are maintained to Company's standards at all times.
• All other tasks as delegated by the Head Chef.

Requirements

• At least 3 year experience in pastry production. Experience with high-end pastry products is a must.
• Able to learn and adapt quickly and assist Head Chef diligently.
• Must be able to work effectively in a team environment.
• Must have a positive and professional attitude at all times.
• Must be able to work under pressure and in a fast-paced environment.
• Passionate about pastry
• Must be able to work night shift or split shift
• Must be able to work extra hours or weekend if needed

• Lead and manage daily Service Operations activities.
• Actively coordinate with the Project Coordinator in resolving customer service-related issues to address in a timely manner.
• Timely schedule all service-related jobs and ensure all stakeholders are well informed.
• Establish daily planning, appropriately assign task to service team and track status.

Job Description

Job Scope For Engine Technician

Engine technician, maintain and repair machinery on vessel. You will be responsible for ensuring functionality and reliability of machines, engines and mechanical systems with the instructions from supervisor. Engine technician must have manual dexterity and great attention to detail. They must be able to work with various machines and tools as well as follow all safety precautions.

The main job scopes were as follow.

• Familiarity with parts and components of engines, gearbox and machinery as well as the tools to fix them.
• (knowledge on 2 stroke and 4 stroke engine)
• Follow repair procedure and instruction from supervisor to carry out overhauling of components and provide great customer service
• Perform routine maintenance and general technical work on engine.
• Ensure overhauling of engine/machines meets vessel planned schedule.
• Ensure safety during work assignment.
• Ability to follow established procedures and practices and read instruction manual.
• Maintain & Ensure instrumentation devices with valid certificate and in good operating condition before use. (All lifting equipment and working tools)
• Report problems or concerns to supervisor immediately
• Accomplish organization mission by completing related results as needed
• A positive “can do” attitude to achieve company’s goals.

Requirements:

• Requires an ITE/Diploma certificate or its equivalent.
• Preferred with relevant experience within the engine overhaul industry, but not mandatory.
• Able to work well in a team with good interpersonal skills.
• Works under moderate supervision.
• On job training will be provided.
• For candidate who have a higher experience will be considered to a senior role.
• Salary will commensurate according to experience & qualifications.

Additional Information:

• 5 days’ work week.
• Transport provided.
• Variable bonus and better medical benefits.
• Career growth & learning opportunity.

Please send your application with availability, current & expected salary. We regret that only shortlisted candidates will be notified. Thank you for applying.

Overview

This position is responsible for the development of HMGICS's Technology Roadmap and maintain its ecosystem of innovation and technology partners. He/She will develop the structure for monitoring performance of various factory processes, identify pain points to be resolved with technology pilots, and leverage data-drive approach to drive continuous improvement.

Roles & Responsibilities

• Support the planning & implementation of technology roadmap in collaboration with HMGICS and HMG stakeholders
• Design, develop, and maintain HMGICS use case and technology catalogue
• Design, develop, and maintain HMGICS ecosystem of technology and innovation partners, in collaboration with HMGICS and HMG stakeholders
• Define methodology and detailed work processes to continually measure performance and project ROI
• Engage with relevant stakeholders in HMGICS manufacturing group to gather data and develop insights on critical pain points
• Perform data analysis to identify operational bottlenecks and system impediments
• Leverage data analysis and facilitate brainstorming workshops to develop practical and sustainable solutions
• Provide project management support with operation teams to implement solutions
• Monitor performance improvements post-deployment and ensure smooth handover to production team

Requirements

• Bachelor's Degree in Engineering or relevant discipline
• At least 3-5 years (Junior)/ 5-10 years (Senior) of experience in Management Consulting / BusinessProcess Re-engineering / ICT Consulting/ Process Innovation/ Business/ System Consulting
• Technical skills in process innovation consulting projects, IT/OT System development project
• Deep understanding in manufacturing industry
• Technical skills in data analysis or B.I.(Business Intelligence) implementation

Responsibilities:

• Provide daily operational and administrative support for the functioning of labs and programmes
• Administrative support for procurement, installation, and troubleshooting of equipment
• Procurement of chemicals, consumables and inventory management
• Administrative support to researchers, students, and contractors for matters related to health, safety and other compliance
• Administrative support for the implementation of the NTU safety policy, safety audit, and safety training
• Administrative support for license matters

Requirements:

• Undergraduate Degree/Diploma in Chemistry, Physics, Material science or Diploma in Business Administration and other fields
• Experience in laboratory management is advantageous
• Documented experience in Microsoft Office applications (Word/ Excel/ PowerPoint/ Outlook)
• IT literate and good in Writing Skills
• Meticulous, organized, able to prioritize and multi-task.
• Team player with good communication and interpersonal skills
• Able to work both independently and as a team
• Able to work under pressure and meet tight deadlines
• Good interpersonal skills
• Good communication and writing in English

** ONLY Singaporeans/ PRs may apply ** No Agents Please**

We are on a lookout for energetic and creative people who are passionate about creating a better environment for everyone. Individuals who are able to work as a team to provide clean energy to the buildings in Singapore.

Responsible for marketing and sales of solar energy systems

- Identify and engage potential prospects

- Plan, implement and monitor marketing activities to ensure relevant targets are achieved

- Conduct site visits and assessments to meet the clients' needs

- Develop long term customer relationships and create referral programme

- Shortlisted applicants will be notified by email

** ONLY Singaporeans/ PRs may apply ** No Agents Please**

- Preferably to have Professional qualifications on photovoltaics or renewable energy

- Experience in sales and marketing

- Self motivated with strong communication skills

- Electrical knowledge, keen interest in engineering

- Able to learn quickly and adapt to the business

- Conduct key word research, web-traffic monitoring, bit-bite and web statistics reporting.

- Develop communication materials.

- Plan content for print, broadcast and outdoor media roadshows, in-store sales promotions and/or events.

Job Description

• Handling of accounting functions inclusive but not limited to Accounts Receivables, Accounts Payables, General Ledgers, Bank Reconciliations
• Maintain cash book, petty cash and prepare payments
• Liaise with Project Managers and to update project status to ensure bilings to clients are on time and align wiht project milestones
• Process Employee claims (Medical, Travel and etc.)
• Assist with GST submission
• Liaise with auditor &tax agent for financial reporting documents
• Assist in banking-related matters
• Processing payroll via HRMS system
• and any other assigned accounting related duties

Requirement

• Diploma in Accounting or related qualifications
• Preferably with minimum 2 years' relevant experience in a similar role
• Proficient in MS Office applications (Excel, Words and Powerpoint)
• Familiar with Payroll software such as MYOB

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime.
• Ensure to know project scope of works and meet the clients needs as per project standard and requirements.
• Together with site supervisor, review and ensure that engineering drawings issued for construction should be completed with site constructability.
• To learn on how to Check and to review issued BOM (Bill of Material) MTO’s for discrepancies and any non-construability or discrepancies shall be follow up and take actions.
• Together with material controller personnel in charge and manage for the respective construction areas to maintain an efficient and effective workflow and minimize wastage of all construction material and equipment.
• Immediate action if have any material shortage that is highlight from construction team and resolving any areas of concern at site as soon as possible.
• To learn on how to Coordinate for site arrangment to resolve any unexpected technical problem and liase with client personnel if have any engineering problem or design issues, if requested.
• Together with HSE personnel to resolve and close any finding at site.
• Together with QA/QC personnel to resolve and close any finding at site.
• Ensure that records are accurate and comply with organisational and legal requirements as well as project requirements.
• To learn on how to Set out detailed works as per the contract drawings, ensuring checks are carried out on a regular basis or MTO.
• To learn on how to Prepare and develop MSRA before start execution any activity.
• To learn on Possess of techical knowledge, skills and international standards (eg. ASME, API etc)
• To learn on how to Oversee and monitor works progress as per project schedule.
• Update and report daily progress status and lookahead minimum 3days plan.
• Learn and conduct tool box meetings.
• *FRESH GRADUATES ENCOURAGE TO APPLY*

Supervisor Responsibilities:

• Making sure employees that report to you meet performance expectations.
• Giving instructions or orders to subordinate employees.
• Ensuring that the work environment is safe, secure and healthy.
• Meeting deadlines.
• Approving work hours.
• Ensure great customer service at all levels.

Supervisor Requirements:

• Previous leadership experience.
• Excellent communication skills.
• Eye for detail and accuracy.
• Reliable, with high integrity and strong work ethic.
• Ability to work as part of a team.
• Professional appearance and attitude.
• Computer literacy.
• Proactive organizational skills.
• High school diploma.
• Ability to keep a positive attitude in a fast-paced environment.

Roles & Responsibilities:

• Design and formulate adhesive products and synthesize fine chemical and specialty chemicals
• Adhesive analysis, development & inspection
• Document & sample preparation
• Provide technical support to the Sales Department
• Perform calibration and maintenance of lab equipments
• Maintain documentation for work procedures in accordance with ISO standards
• All other ad-hoc duties as assigned

Requirements:

• Degree in Chemistry or Chemical Engineering
• Minimum 3 years of relevant work experience / manufacturing environment is preferred
• Experience in the adhesive, paint, and chemical industry is preferred
• Mature, possess effective communication skills and able to interact with people at all levels
• Computer-literate with knowledge of MS Office applications (i.e. Excel, PowerPoint and Word)

Business Development Manager Job brief

We are looking for an ambitious and energetic Business Development Manager to help us expand our clientele. You will be the front of the company and will have the dedication to create and apply an effective sales strategy.

The goal is to drive sustainable financial growth through boosting sales and forging strong relationships with clients.

Business Development Manager Responsibilities

• Develop a growth strategy focused both on financial gain and customer satisfaction
• Conduct research to identify new markets and customer needs
• Arrange business meetings with prospective clients
• Promote the company’s products/services addressing or predicting clients’ objectives
• Prepare sales contracts ensuring adherence to law-established rules and guidelines
• Keep records of sales, revenue, invoices etc.
• Provide trustworthy feedback and after-sales support
• Build long-term relationships with new and existing customers
• Develop entry level staff into valuable salespeople
• Developing goals for the development team and business growth and ensuring they are met.
• Training personnel and helping team members develop their skills.
• Finding and developing new markets and improving sales.
• Perform any other duties assigned by the director.

Business Development Manager Requirements and skills

• Proven working experience as a business development manager, sales executive or a relevant role
• Proven sales track record
• Experience in customer support is a plus
• Proficiency in MS Office and CRM software (e.g. Salesforce)
• Proficiency in English
• Market knowledge
• Communication and negotiation skills
• Ability to build rapport
• Time management and planning skills
• BSc/BA in business administration, sales or relevant field
• The ability to work under pressure.
• Availability to work within opening hours (e.g. evenings, holidays, weekends).

1. Perform inspection, testing and sampling of material or assembled parts or products for defects and deviations from specifications.
2. Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments.
3. Report and Discuss inspection results with those responsible for products and recommend necessary corrective actions.
4. Issue NCR to materials and equipments that fail to meet material specifications.
5. Maintain records from testing, information and various metrics for tabulation of results
6. Inspect production cycle to ensure production is efficient and comply with safety standards
7. Prepare reports and logs, summarizing re-work and waste and input information to quality database
8. NCR data collections and photo taking.
9. Ensure calibrated equipments and logs are maintained and bring calibrated.

Requirements

• Preferably with related working experience.
• Minimum O’level or equivalent qualifications
• Proficiency in English and adequate computer skills.

Automation Engineer (Night shift)

12-month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission.

Job Scope:

• Under the supervision of the In-Process Technical (IPT) Automation Lead, the Automation Engineer is responsible for providing technical support for automation systems.
• Supports the Automation Lead and Senior Automation Engineer in investigations, finding resolutions to automation problems, and implementing Automation Change Control in compliance with SDLC, GMP, safety, and environmental regulations.
• Supports the IPT Automation Lead by providing expertise, technical knowledge, and advice to IPT/COEs (Centre of Excellence) on computerized/automation systems.
• Performs automation maintenance activities, including system backup, disaster recovery, and obsolescence management, to ensure automation systems remain in a validated state.
• Ensures timely resolution of identified automation issues and unplanned events through daily walk-throughs.
• Escalates ongoing automation issues to the Automation Lead in a timely manner.
• Reviews PMs being performed and looks for continuous improvement opportunities.
• Performs automation change controls under the guidance of the Automation Lead to ensure changes are raised and closed on time and meet the required quality standards.
• Prepares and performs Automation Installation Qualification (AIQ) / Automation Operational Qualification (AOQ), test plans, and documentation, ensuring that documentation meets regulatory standards.
• Develops Automation SOPs, job aids, and procedures.
• Develops and updates Automation training packages and conducts Automation training.
• Provides support for deviation and operation investigations requiring code and system-level troubleshooting.
• Supports a continuous improvement framework within Automation and the IPT, working with Leads to identify and implement improvements.

Requirements:

• Degree in any engineering, IT, or computer field.
• At least 1 year of experience in automation
• Familiar with knowledge of PLC and programming such as VBA or C++
• The candidate will be required to work on permanent night shift (9pm-6pm) to support the automation activities at the production site during night time

Reg No: R22104540

EA License no: 94C3609

OVERVIEW

1. Manage and promote projects with SECOM HQ and establish consistent expectations with the stakeholders within SECOM and support the future business growth.
2. Coordinate and facilitate with SECOM HQ among the related parties including SECOM Smart Singapore, Malaysia & Hong Kong, SECOM Singapore, SECOM Malaysia, JCI and the other external parties to communicate and achieve the milestones and goals properly.
3. Work together with SECOM HQ to design, implement and sustain IT environments in SECOM Smart Singapore, Malaysia and Hong Kong, where appropriate and reasonable, particularly in the area of MASterMind.
4. Liaise with SECOM Groups from both IT and business aspects and ensure their requirements are treated reasonably and properly.
5. Assist SECOM Singapore to improve and sustain their IT operation and environment. Monitoring and managing all installed systems and infrastructure and ensure highest availability.
6. Implement and maintain new services of Microsoft 365 Suite, SDWAN connectivity and End Point Security.

Job Description

1. Execute and promote projects with SECOM HQ and ensure reasonable quality of programs.
2. Coordinate and facilitate with SECOM HQ among the related parties including SECOM Smart Singapore, Malaysia & Hong Kong, SECOM Singapore, SECOM Malaysia and the other external parties such as KDDI and MAS to communicate and achieve the milestones and goals properly as planned.
3. Design, implement and maintain IT environments, IT Operations and Access management for SECOM Smart Singapore, Malaysia and Hong Kong to use MASterMind and network connectivity. New links to be setup worldwide in the future.
4. Support CMC systems and in SECOM environment. Knowledge in Call Center environment would have an advantage.
5. Serve as the first and second line support in conjunction with both external and internal parties to monitor & provide the system services for the business.
6. Act as the one of the focal point for major issues when necessary.
7. Contribute SECOM Groups from both IT and business aspects and assist their requirements are treated reasonably and properly.
8. Work together and assist SECOM Singapore to improve their IT operation and environment.
9. Manage risks, deliver projects on time and improve processes related to responsibilities.
10. Install and configure new connections using SDWAN. Optimizing cloud computing performance as well as reducing costs by tweaking the uptime and idle time of running the operations.
11. Usage of key performance manager like Zoho OPSManager to perform proactive monitoring of IT equipment and escalate to the relevant departments.
12. Perform protections and standardization of desktop computing using Group Policy and Anti-virus management console and follow CIS benchmark settings.
13. Other duties as assigned.

Job Requirements

1. Degree in Engineering or Comp Science, relevant security industry experience is added advantage.
2. Minimum 3-4 years IT related working experience.
3. Experienced in overseeing network infrastructure. Firm understanding of LAN, WAN, Wireless architecture design. Have experience not limiting to brands like Cisco, FortiGate, VMWare
4. Administration, maintenance, and installation of VMware, VCenter, VDI Act as the one of the focal point for major issues when necessary.
5. Possesses good communication and interpersonal skills.
6. Strong teamwork capability, experience in SEA regional IT support is a plus.
7. Experience in Avaya & NICE recording system and 24/7 call center environment support is a plus.
8. Usage of key performance manager like Zoho OPSManager to perform proactive monitoring of IT equipment and escalate to the relevant departments is a plus.
9. Perform protections and standardization of desktop computing using Group Policy and Anti-virus management console and follow CIS benchmark settings.
10. Committed and dedicated to work with all levels of people in the organisation.

Company & Product:

We are a global company in Renewable Energy.

Our business focuses on Low & Medium voltage Cable, Electric Vehicle Charging station & Energy Storage System solution.

Responsibilities:

Finance :

• Manage financial planning, budgeting, and forecasting processes.
• Oversee financial reporting and analysis for the whole group.
• Ensure compliance with accounting principles and regulatory requirements.
• Develop and implement financial policies and procedures.

HR :

• Lead the recruitment and onboarding process.
• Develop and implement HR policies and procedures.
• Oversee employee relations and performance management.
• Handle payroll processing and benefits administration.

Requirements:

• Diploma or degree in Finance, HR, or related field.
• Proven experience in Finance and HR roles.
• Strong understanding of financial principles and HR best practices.
• Excellent communication and interpersonal skills.
• Ability to manage multiple responsibilities and deadlines.

Our Client:

• Marine Industry, German MNC
• 5 Days, Office Hours
• Pioneer/Benoi Area
• UP $5000 Basic + Variable Bonus

Job duties:

• Conducting marine equipment’s overhauls, inspections, & repairs on site
• Preparing relevant reports & scheduling jobs
• Dealing with products such as couplings, shafts, mounts, brakes, backstops, fluid couplings
• Troubleshooting diesel engines, gearboxes and gensets

Requirements:

• 3 to 5 years hands on experiences in mechanical troubleshooting, overhauls, repair, & inspection for marine related products & machines
• ITE/Diploma level in any engineering related course
• Possess valid class 3 license

Salary: Basic Up $5000 + Variable Bonus

Working location: Pioneer/Benoi Area

For interested applicants, please click "Quick Apply”

Alternatively, please email your latest resume to [email protected]

We regret to inform that only shortlisted candidates would be notified.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

Grayson Tan Lee Fong | EA Reg No: R1441412

JTE Recruit Pte Ltd | EA Lic No: 14C7215

Job Description & Requirements

Roles & Responsibilities

• Create a sales strategy to provide revenue retention, revenue growth, and new business for your personal client portfolio in order to reach or surpass your personal sales targets and overall organic business growth goals.
• Create and implement client relationship management plans to identify and build relationships with relevant decision makers and influencers within own customer portfolio organisations, allowing for effective two-way information flow and understanding of where the company can deliver customer value and resolve issues.
• Sets clear objectives for each sales call or meeting; adapts standard materials to deliver engaging presentations to customer decision makers and influencers; asks pertinent questions to gather information, assess the level of interest of customers, and identify and respond to areas requiring additional information or explanation.
• Create a personal network in the business sector and represent the firm to clients and at business sector events. Obtains market knowledge and raises the company's visibility and reputation, as well as its goods, services, and capacity to deliver comprehensive safety solutions.
• Configure product and service solutions, as well as associated contractual conditions, to satisfy the mid- to long-term demands of clients, including input from appropriate internal specialists. Presents the solution to client representatives and negotiates an arrangement within a set of comercial constraints.
• In charge of updating CRM and effectively uses the CRM system to drive sales activity plans and provide timely reports.
• Build strong external customer relationships by collaborating internally and serving as the customer advocate in cross-functional teams

Qualifications:

• 3+ years of experience in a sales manager
• You will have experience of sales within marine industry
• You must be a self-driven professional
• An out of the box thinker capable of being creative
• Experience of fire safety equipment desirable but not essential
• Experienced in Salesforce

Job Description:

1. Provide administrative support to the Operations/Production Department.
2. Maintain records of transactions and processing of the product's status according to compliance requirements
3. Perform adjustments to correct pre-processing and processing errors in accordance with established procedures.
4. Accurately maintain/update Daily Processing Reports (DPR) and Tally sheets, including production quantities, materials used, and production stages.
5. Accurately record and track inventory levels for raw materials, finished goods, and packaging materials in the cold store.
6. Perform data entry tasks to input production and inventory information into databases or electronic systems.
7. Verify the accuracy of data entries and cross-check information with supporting documents.
8. Collaborate with production and store teams to gather necessary information and resolve any discrepancies or issues related to production records or inventory levels.
9. Assist in label printing & label layout design.
10. Manage consumables stock-level inventories to buffer stock to facilitate smooth production operations.
11. Generate reports, summaries, and analysis of production and inventory data as required.
12. Ensure compliance with record-keeping procedures and company policies.
13. Safeguard confidential information and maintain data integrity.
14. Support audits and inspections by providing accurate records and documentation.
15. Assist in continuous improvement initiatives related to record-keeping processes and systems.

Requirement:

1. Nitec and above in any discipline.
2. Willingness to work in a mixture of locations, between the production floor (in a cold environment) and in the office.
3. Proficiency in using computer systems, databases, and Microsoft Office applications (Excel & Word).
4. Strong attention to detail and accuracy in data entry and record-keeping tasks.
5. Excellent organizational and time management skills to handle multiple tasks and meet deadlines.
6. Ability to work independently with minimal supervision as well as collaborate effectively within a team.
7. Verbal and written communication skills in both English & Mandarin in order to communicate with Mandarin/English-speaking suppliers/stakeholders/production staff.
8. Familiarity with inventory management systems or software is a plus.
9. Basic mathematical skills for inventory calculations and data analysis.

Job Highlights

• Job Types: Permanent
• Working Hours: Mon to Fri 7.45 am to 4.45 pm, Sat 7.45 am to 11.45 am.
• Great learning development opportunities.
• Work-Life Balance and positive/friendly working environment.

(Only shortlisted candidates will be notified)

Job Description

• Industry/ Organization Type: Spa
• Position Title: Spa Therapist
• Working Location: West
• Working Hours: 5.5 days Timing Flexible

Key Responsibilities

• Consult customers before and after treatment.
• Perform body massage and spa treatments on customers.
• Update customer records regularly.
• Handle basic front desk duties.
• Ensure store cleanliness and hygiene are well maintained.
• Other duties assigned.

APPLY NOW!!!

• At least 1 year of experience in body treatments

Description

Under general supervision, manages multiple internal projects involving a single discipline or department.

Drives various components of project planning and execution on multiple projects such as completion of multiple detailed project specifications.

Leads project activities across functional groups. Ensures that project deliverables are properly completed and directly impacts cost containment, efficiency or profitability of operations.

Provides guidance and mentoring to more junior team members.

Requirement

Requires completion of an undergraduate degree in Science, Technology, Engineering and Math (STEM), and 4 years of related experience.

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solars Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for RECs strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, Indias largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

• Responsible for equipment benchmarking, technical strategies, and technical roadmaps at Solar Cell manufacturing tools.

• Provide technical expertise and recommend technical solutions to the development and design of equipment to maximize overall equipment effectivenLess.

• Harmonize and standardize manufacturing equipment and solutions across all sites worldwide.

• Strong coordination and communication network with both local and overseas manufacturing sites

• Partner with suppliers and subcontractors on new equipment projects, commissioning, Qualification, and installation, according to the planned schedule to add capacity on time

• Identifying and pursuing potential opportunities for hardware capability enhancement, and driving defect reduction.

• Relevant bachelors degree in Mechanical/ Electronic Engineering/ Automation Engineering and/or equivalent.

• More than 4 years experience in Equipment Engineering.

• A team player who can multitask and thrive in a dynamic and fast-paced environment.

• Good experience in problem-solving techniques, methodologies, and project management are a plus.

• Able to work in a clean room environment, gowning up in coveralls, hoods, boots, safety glasses, and gloves(PPEs). Spend significant amount of time on the factory floor working on the tools.

• Proficient in Microsoft (PowerPoint/ Excel/ Word) & AutoCAD applications.

• Oversea traveling may required.

Responsibilities

• Familiar with License Warehouse Custom procedures including able to handle permit declaration
• Liaise with customer on order processing, shipment booking with forwarder, inventory management and others administrative and customer service duties
• Liaise with freight forwarders / transporters on shipment booking, container trucking schedule, arrange courier and local delivery
• Attend to customer request and ensure customer satisfaction
• Ensure proper and timely billing / closing of all jobs in system and forwarded to the Accounting & Finance Department
• Assist to produce regular warehouse reports for management as and when required
• Manages customers complains and claims
• Assist in investigation on shipment failure or quality issue for performance and reporting, and following up to ensure resolution
• Ensure proper filing and documents archiving for audit purpose
• Ensure accurate order fulfilment in accordance with SLA / SOP /response guidelines
• Manages stocks reconciliation and ensure stocks discrepancies resolved in timely manner
• Prepare to undertake new project(s) as part of staff development
• Liaise with Singapore customs for inbound discrepancies and auditing
• Any others adhoc tasks as and when assigned by Assistant Manger

Requirements

• Tertiary or equivalent preferred
• Minimum 1-2 years of experience in 3PL warehouse operations preferably familiar with import and export processes, including different types of permits handling
• Knowledge in Form D and COO handling will be an advantage
• Familiarity with Bonded and Duty-Free products handling
• Knowledge of shipping terms and documents
• Able to multitask include handling of different systems, not limited to WMS and Oracle
• Proficient in Microsoft Office
• Strong command of spoken and written English
• Knowledge in Mandarin is an advantage as officers will be liasing with our Chinese counterparts
• Knowledge on SAP will be an advantage
• Knowledge of Trade first application (Singapore Custom) Qualification will be an advantage
• Only Singapore residents may apply

Roles and Responsibilities

1. Provide general administrative support to related internal departments
2. Maintain proper filing of records, correspondences and documents
3. Data entry and payroll functions
4. Perform ad-hoc and other administrative duties as assigned by supervisor

Job Requirements

1. Minimum 1 year working experience, and proficient in Microsoft Office
2. Willingness to learn and good time management
3. Organised and detailed who can work independently
4. 5 day work week
5. Location: IMM Building