• Overall in-charge for PMIC, Mixed Signal & RF IP Test characterization, Test code development and Test Platform Enablement.
• Liaise closely with test engineering team and production support team to drive debug activities and data correlation with ATE.
• Deliver detailed status reports at each phase, test limit (guard band) generation and summary reports.

Requirements:

• Degree in Electronics/Electrical Engineering or equivalent.
• At least 5 years of characterizing mixed signal IP & RF experience with lab equipment such as Spectrum Analyzer, Digitizers, High Speed Serial Data analyzers, etc.
• Proficient in Embedded C/C++, LabVIEW, FPGA development.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

• Handle a team of line leaders and operators to meet daily production output, quality, productivity, and yield.
• Responsible for manpower, overtime and consumables planning and perform daily pass-down meetings and escalate line issues.
• Ensure manufacturing and safety procedures are observe at all times.

Requirements:

• Diploma in Engineering or equivalent
• At least 2 years of experience in High-Tech, High-Vol Manufacturing industry.
• Able to work 12-hour shifts (day or night)

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Summary Benefits :

• Basic up $2600 - $3500
• East / North
• Engineering - Electrical

Responsibilities :

• Assist in project coordination, equipment installation arrangement, testing and commissioning
• Assist manager in provide solution to the tasks requested by clients on problem of all Electrical
• Liaise with clients, vendors, contractors and sub-contractors
• Build positive relationship with customers and clients
• Work with internal department for process of project claim, Variable order(if any) etc
• In charge of project hand over to client or maintenance department

Requirements :

• Diploma/Degree in Electrical or relevant engineering is advantage
• Entry Level is welcomed. Training is provided
• Preferably to have Class 3 Driving License
• Candidate with relevant experience will have added advantages

To Apply, kindly click on the "APPLY NOW" button.

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

As Sr/Engineer for PDE Technology Development Process Integration, you will be responsible for developing advanced packaging process solution and ensure New Process, New Equipment, New Material and Path finding activities success for NAND, mNAND and DRAM, Controller in Micron. To lead new Technode process readiness and improving the yield, quality and reliability with process characterization and optimization and new materials, machines & technologies introduction. You will need to have understanding of Frontend Process, packaging requirements, chip/package interaction, equipment capability and process technology in the industry and the ability to enable best technology for New Technode & Product Introduction with assembly packaging requirements. You will also be required to drive & collaborate with multi-functional teams to resolve assembly process related problems.

Key Responsibilities

Ensure smooth transition from new process development, 1st qualification success to small volume production launch

• Development and Qualification of new packaging process, material, equipment and technology solutions to meet new Technode (NPI) requirements and schedule
• Perform process TRA, risk mitigation execution and process recipe readiness prior Silicon arrives and ensure 1st pass rate.
• Lead/partner with cross function team/site, to ensure successful transfer to CEM for LVM.
• Qualify new process/technology/equipment/materials
  Implement PDE TD PMI (Product Maturity Index) methodology & provide proper Documentation for product transfer CEM & HVM

Identify path finding opportunities for continuous yield improvement and cost reduction activities

• To understand and be able to integrate process knowledge between upstream and downstream across Si and assembly/packaging process
• Understand the future trend, technology and capabilities required for future packaging solutions, work with teams to put in place new capabilities to enhance process performance.

Provide new solutions on time to meet company and customer needs

• Define, develop and establish process capabilities, strategy and roadmap
  To develop & engage creative solutions for new capabilities or to overcome the identified process constraints, ahead product requirements.

Job Requirements:

• PhD/Masters/Bachelor’s in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics or Equivalent Work Experience Required
• At least 2 years' experience in semiconductor industry
• Experience in Frontend fab Process integration or Module process with technical knowledge on wafer and die level process technology
• Understanding of Micron’s silicon and how it interacts at backend process & package level through CPI is a plus
• Strong project management skills to ensure execution to timelines
• Strong communication and presentation skills
• Understanding of business needs and customers’ requirement
• Ability to integrate & partner with people from cross function teams

Keen on the role? Apply now!

• Well Establish Company
• Basic $ 3,500- $5,000 + Allowances + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tagore
• Working hours: 8.30am to 5.30pm (Monday to Friday)

Key Responsibilities:

• Lead generation role and be responsible for conducting market research, developing solutions, prospecting, and expanding referral networks to seek out potential clients
• Coordinate Sales Efforts to Support Growth and Achieve Sales Targets
• Maintain High Quality Customer Service by ensure responsive services with follow ups, build strong relationships clients
• Respond to complaints from clients and give after-sales support on a timely basis
• Provide technical support and advice for clients
• Other ad hoc duties as assigned

Requirements:

• At least 2 years of sales experience in the engineering or technical industry (e.g. Oil and Gas, Petrochemical, Pharmaceutical, Marine)
• Experience in Valve & Actuators will be a bonus

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG JYA YEE (R23119014)
EA Recruitment Pte Ltd
EA License No: 21C0492

As a Product Engineer at Micron, you will be part of a forward-thinking team of engineers that solves complex problems, responsible for enabling Micron’s products with flawless and issue free release to both internal and external customers. Product Engineers are the key interface between Research and Development, Manufacturing, Marketing, and Quality Assurance departments.

Key Responsibilities:

• Responsible for both product development and supporting high volume manufacturing of SSD (BGA SSD)
• Develop high quality and cost efficient BGA SSD test strategies
• Support for SSD failure analysis from NPI to HVM stage
• Perform manufacturing yield evaluation and data analysis
• Perform electrical and physical failure analysis and work with other departments to resolve SSD related issues
• Troubleshooting failure from customer return and provide solutions to fix the problems

Requirements:

• Degree in Electrical/Electronic/Mechanical Engineering with at least 1 year of experience in Product Development/Product Engineering
• Proficiency in programming languages such as C, C++, Python, Perl and etc.
• Relevant working experience on Controller PCIe Protocol, failure analysis, big data analysis and TTR project.
• Relevant experience in SSD industry and knowledge in NAND component testing and failure analysis will be an advantage
• Relevant experience with computer hardware, knowledge of storage interface such as NVME will be an advantage
• Excellent problem solving and analytical skills
• Effective communication and presentation skills

• Company located at Woodlands

• Working hour: 8:30am – 5:30pm (Mon – Fri)

• Variable Bonus + Excellent Welfare

• Well Established Automation Electronics Manufacturing Company

Job Scope

• Analyze project requirements for industrial robotic equipment/machines.
• Design, and test electrical control systems for industrial automation.
• Create detailed electrical schematic drawings using E3 (or ePLAN as a second option).
• Source and select control components based on project specifications.
• Execute control system setup, including IO system configuration, servo and step drive setup, and axis tuning.
• Provide on-site technical support during the installation and commissioning of robotic equipment/machines.
• Troubleshoot and resolve electrical and control system issues.
• Maintain detailed documentation throughout the project lifecycle.

Requirement

• Degree in Electrical Engineering / Control Systems Engineering or related disciplines
• 2 to 4 years of relevant experiences and roles in Industrial Automation
• Experience in programming motion controllers, robots, or touch panels is an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

KHOO SOT MEI (R21102604)

EA Recruitment Pte Ltd

EA License No: 21C0492

We are looking for an innovative procurement manager to lead our procurement team. You will spearhead the purchasing process from selecting suppliers to ensuring stock optimization, as well as provide guidance on sourcing and procurement processes.

Our procurement manager will be a supply chain and logistics expert who will specialize in implementing cost-effective purchases of all goods and services, as required by the company. Ensuring quality control and adhering to the company’s policies and procedures on supply chain management will be some of your main priorities when carrying out this role.

Procurement Manager Responsibilities:

Developing procurement strategies that are inventive and cost-effective.

Sourcing and engaging reliable suppliers and vendors.

Negotiating with suppliers and vendors to secure advantageous terms.

Reviewing existing contracts with suppliers and vendors to ensure on-going feasibility.

Building and maintaining long-term relationships with vendors and suppliers.

Approving purchase orders and organizing and confirming delivery of goods and services.

Performing risk assessments on potential contracts and agreements.

Controlling the procurement budget and promoting a culture of long-term saving on procurement costs.

Overseeing and managing the IT systems that track shipments, inventory, and the supply of goods.

Preparing procurement reports.

Procurement Manager Requirements:

Bachelor’s degree in supply chain management, logistics, or business administration.

Proven experience managing supply chain operations.

Experience using supply chain management software and tools, including Oracle, SAP Ariba, and/or Envision.

In-depth knowledge of preparing and reviewing contracts, invoicing, and negotiation terms.

Proficient in Microsoft Office Suite (Word, Excel, Outlook, and Access).

Management and leadership skills.

Multi-tasking and time-management skills, with the ability to prioritize tasks.

Highly organized and detail-oriented.

Excellent analytical and problem-solving skills.

AMK, Semiconductor and Automation company

• 5 days work
• Annual leave start from 14 days
• AWS, VB, annual leave, medical claim, dental claim

Job Scope:

• Source and evaluate suppliers for machine parts and materials locally and globally.
• Continuously identify new suppliers and review existing ones to maintain a pool of qualified options.
• Work with suppliers to order quality products, negotiate terms, and ensure timely deliveries.
• Coordinate on schedules, quality, and specifications.
• Manage project costs and ensure data accuracy.
• Manage inventory and purchase orders.
• Collaborate with teams such as design, engineering, and assembly to ensure cost savings and on-time project delivery.
• Enforce procurement policies and procedures both internally and externally.
• Assist in arranging training sessions with suppliers for designers or engineers when needed.
• Perform ad-hoc administrative tasks as required.

Requirements:

• Diploma or degree in a related field.
• At least 2 years of experience in procurement, preferably in the semiconductor industry.
• Some technical knowledge of machine components.
• Familiarity with SAP and MS Office.

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Job Description

Contracting Strategy & Management:

• Lead the planning and development of contracting strategies for all terminals, ensuring alignment with project scope and contractor market insights. Involve early on, starting from the Investment Proposal stage.
• Oversee the contractor pre-qualification process.
• Set up contracts, manage scope changes, and address scheduling obstacles in close coordination with the Project Manager.
• Manage the entire tendering process up to contract awards.
• Develop contracting and sourcing plans while organizing tender boards in compliance with the Global Tender Procedure.

Supplier Management:

• Organize and conduct pre-qualification assessments for tenders.
• Ensure an updated list of qualified vendors and contractors is maintained.
• Conduct site visits for contractors involved in growth projects as required.

Contract Management:

• Ensure procurement contracts are implemented effectively, monitored, and fully utilized.
• Ensure contract availability and visibility, as well as compliance with procurement policies and principles.
• Evaluate supplier contracts with stakeholders and determine necessary adjustments or terminations.
• Collaborate with Project Managers to negotiate Variation Orders for growth projects.

Purchase-to-Pay (P2P):

• Oversee and execute all stages of the P2P process (Request, Approve, Order, Expedite, Receive) to ensure timely delivery of services/products, leveraging the ERP system.
• For purchases exceeding SGD40K without framework agreements, manage the supplier selection process, including market analysis, development of RFIs and RFPs, conducting clarification meetings, and coordinating with internal partners.

Project & Category Strategy Development:

• Develop project and category strategies based on key procurement categories, conducting internal and external analyses to secure and sustain optimal business value in terms of cost, efficiency, and risk management.
• Ensure availability of goods and services according to budget and planning requirements.

Annual Procurement Plan:

• Execute terminal procurement plans and budgets.
• Perform spend analysis, contract reviews, and process improvement assessments, aligning initiatives with stakeholders.

Continuous Process Improvement:

• Regularly review S&P policies and systems to identify and recommend P2P process improvements to the Manager of S&P.

Performance Measurement:

• Monitor and analyze performance by measuring KPIs (e.g., P2P, savings, contractor safety) and provide recommendations for improvements.

Job Requirement:

• Solid commercial awareness with experience in Contract Law, including drafting contract/specification clauses.
• Proven track record in contract negotiations and vendor management.
• Strong negotiation, communication, and analytical skills; decisive and proactive.
• Quick learner, team player, and able to work independently.
• Minimum 3 years of experience in Contracting Management or Procurement.
• Bachelor’s Degree in any discipline.

Other:

• Monday - Friday
• AWS
• West Area

************************************************************

START YOUR REWARDING CAREER WITH US NOW!

************************************************************

Interested Candidates, Please send your Detailed Resume stating Past Employments, Including Reasons of Leaving, Current / Last Drawn and Expected Salary to: [email protected]

WE REGRET TO INFORM THAT ONLY SHORTLISTED CANDIDATES WILL BE NOTIFIED

Manfield Employment Services Pte Ltd (Lic. No: 95C2823)

Posting Personnel: Leroy Lok

EA Personnel Reg No.: R2090115

By sending your job resume to us, it shall be deemed that you have agreed and hereby give your consent to MANFIELD in collecting, using and/ or disclosing your personal data for the purpose of accessing and processing your job application and/ or for future job opportunities within MANFIELD and/ or with the client(s) of MANFIELD. If you wish to withdraw your consent, please notify us. Kindly visit our company website for more information on the Privacy Policy.

We are looking for an innovative procurement manager to lead our procurement team. You will spearhead the purchasing process from selecting suppliers to ensuring stock optimization, as well as provide guidance on sourcing and procurement processes.

Our procurement manager will be a supply chain and logistics expert who will specialize in implementing cost-effective purchases of all goods and services, as required by the company. Ensuring quality control and adhering to the company’s policies and procedures on supply chain management will be some of your main priorities when carrying out this role.

Procurement Manager Responsibilities:

Developing procurement strategies that are inventive and cost-effective.

Sourcing and engaging reliable suppliers and vendors.

Negotiating with suppliers and vendors to secure advantageous terms.

Reviewing existing contracts with suppliers and vendors to ensure on-going feasibility.

Building and maintaining long-term relationships with vendors and suppliers.

Approving purchase orders and organizing and confirming delivery of goods and services.

Performing risk assessments on potential contracts and agreements.

Controlling the procurement budget and promoting a culture of long-term saving on procurement costs.

Overseeing and managing the IT systems that track shipments, inventory, and the supply of goods.

Preparing procurement reports.

Procurement Manager Requirements:

Bachelor’s degree in supply chain management, logistics, or business administration.

Proven experience managing supply chain operations.

Experience using supply chain management software and tools, including Oracle, SAP Ariba, and/or Envision.

In-depth knowledge of preparing and reviewing contracts, invoicing, and negotiation terms.

Proficient in Microsoft Office Suite (Word, Excel, Outlook, and Access).

Management and leadership skills.

Multi-tasking and time-management skills, with the ability to prioritize tasks.

Highly organized and detail-oriented.

Excellent analytical and problem-solving skills.

PROCUREMENT OFFICER
► Semiconductor and Electronics industry.

► Work Location: Ang Mo Kio

►Working hours: 8.30am to 5.30pm, Monday to Fridays

► AWS + VB

► Lean Team

Our Client is a well-established company in Singapore to serve the semiconductor and electronics industries both local and globally.

Responsibilities:

· Actively source, assess and research potential suppliers for machine components, materials and procurement products from both local and overseas.

· Make on-going efforts to identify new suppliers and review current suppliers to maintain a pool of qualified suppliers.

· Communicate with suppliers and order high-quality products and materials for the business.

· Maintaining good supplier relations and negotiating skills to secure best price, payment terms, lead time and ensure on-time delivery.

· Work closely with suppliers on delivery scheduling, quality issues, component specifications and certification requirements.

· Assists to arrange trainings for designers and/or engineers with suppliers when required.

· Manage, maintain and monitor project costings closely to achieve cost savings and ensure the accuracy of the data in the project costings.

· Manage the turnaround time for inventory.

· Handling the Purchase Order Management.

· Work closely with various teams such as designing, engineering, workshop and assembly to ensure on cost-savings measure and on time deliveries for projects.

· Enforce to procurement policies and procedures with the company and externally.

· Ad-hoc administrative duties.

Requirements:

· Diploma or Degree in related discipline.

· Minimum 2 years of working experience in procurement function, preferably in the semiconductor industry.

· Some technical knowledge in machine components is preferred.

· Able to work independently under pressure and tight schedules.

· Knowledge in SAP and MS Office.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

Kindly send your resume in MS Word format to:

[email protected]

We regret only shortlisted candidates will be notified.

By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chew Hong Huang

EA Personnel Reg. No.: R24124128

Responsibilities:

• Responsible to source, negotiate and purchase materials from approved local & overseas vendors.
• Take lead in sourcing for new goods not supplied by regular principals/vendors with the aim to reduce cost whilst maintaining quality and requirements.
• Ensure all purchase request are approved within mandated guidelines.
• Evaluate vendor’s quotation to ensure that they are in line with the technical and commercial specifications required for the project.
• Process the purchase orders correctly by liaising with suppliers, stakeholders and purchasing admin.
• Manage the daily operational purchasing needs such as following up on Purchase Orders delivery and shipment schedules.
• To effectively manage the air and sea freight costs by optimizing the relevant use of incoterms.
• Resolve supply, quality, service and invoices issues with vendors and or other stakeholders.
• Evaluate supplier performance based on quality standards, delivery time & best competitive prices accordingly to criteria and Company’s requirements.
• Responsible for implementing procurement strategies on urgent deliveries and long lead time items to meet project timeline.
• Undertake any other assigned ad-hoc duties.

Requirements:

• Minimum Diploma in Procurement/ Supply Chain/ /Marine/ Engineering or equivalent certifications.
• Preferred 3 years relevant working experience in a similar capacity preferably in Construction/Marine/Offshore industry.
• Good negotiation, communication and interpersonal skills.
• Able to work well under stress in a fast pace environment
• Proficient in the use of MS Office Application (Words, Excel) and an acceptable understanding of ERP.
• An organized team player with sense of priority & close attention to details.

Ø To Ensure Piping Fabrication, Installation and Erection works in compliance with Project

Specification.

Ø To identify risks and Hazards associated with the Piping works and prepare related Risk

assessment and work Method statement.

Ø Pre—Job Briefing and Tool Box Talk to workforce prior to start the work activity.

Ø To ensure timekeeping are followed by subcontractor workers.

Ø To ensure availability of required Engineering drawings, Resources and consumables to carry out

the works.

Ø To coordinate with other discipline such as QA/QC, Material Dept., Painting team etc. according

to requirement during the project phase.

Ø Ensure valid work permit is available with subcontractor prior to start the work.

Ø Ensure site/ shop activity must be highlighted in daily PSCC meeting and communicated to all

parties.

Ø Ensure proper housekeeping to be carried out by subcontractor after completion of job.

Ø To participation in line walk and prepare punch list prior to complete piping Reinstatement

activity.

Ø To ensure Punch list liquidation and action by subcontractor on required punch point on priority

basis.

REQUIREMENTS

Ø Ability to read and understand the piping isometric and general arrangement drawing.

Ø Good knowledge on Piping Fabrication, installation and Erection methodology.

Ø Having good knowledge on Piping and Instrumentation Diagram (P&ID) and PFD,

Ø Ability to assign work scope to subcontractor Workforce and monitoring of work activities at site.

Ø Technical ability to understand the problem and ability to resolve with proper solution accordingto the project specification,

Ø He has good knowledge on carry out Piping Walks, summarize detail punch list and preparingaction plan to complete the assigned work on time.

Ø Hard working and committed to work towards assigned task and result oriented as pipingsupervisor.

Ø Ability to Review Piping Test Packages and plan for carry out related inspection and QC clearancefor final walk.

Ø Ability to co-ordinate with client and good monitoring and follow up at site to get the progress.

Ø Well Verse with the Safety Requirement during execution of piping works.

ØReady to Work night shift.

The Storage Engineer is responsible for the administration, monitoring, and troubleshooting of Storage Area Network (SAN) and backup systems in a 24x7 enterprise environment. This role covers both level 1 and level 2 support for storage-related issues and requires certification and experience with a range of storage and backup technologies. Key technologies include IBM, EMC, NETAPP, Hitachi, Cisco SAN switches, and enterprise backup solutions. The Storage Engineer will ensure seamless operation, maintain system integrity, and support disaster recovery activities.

Key Responsibilities:

1. Storage Administration & Support: Provide installation, configuration, and ongoing administration support for SAN and enterprise backup systems to maintain operational efficiency.
2. Monitoring & Health Checks: Perform regular health checks and monitor storage devices, ensuring early identification and resolution of potential issues.
3. System Integration: Integrate storage hardware and software into the operating environment, ensuring compatibility and optimal functionality.
4. Firmware Updates & Documentation: Conduct firmware updates on storage devices and maintain comprehensive documentation for all configurations and processes.
5. Testing & Validation: Develop and coordinate test plans with customers to verify the full functionality of storage and backup solutions in live environments.
6. Backup Administration: Manage Symantec and other backup environments, including job configuration, scheduling, performance tuning, and troubleshooting of backup-related issues.
7. Disaster Recovery: Execute disaster recovery (DR) protocols for critical systems, ensuring successful restoration of production or DR servers when needed.
8. Storage Subsystem Management: Oversee multiple storage subsystems, including tasks like disk partitioning, LUN assignments, and capacity planning.
9. Zoning & Access Control: Create and manage zones, handle switch-related issues, and define security configurations within the torage subsystems.
10. Capacity Planning & Performance Tuning: Conduct capacity planning, monitor utilization, and tune performance for both storage and backup systems.
11. Data Center Operations: Support data center operations, including power cycling of storage devices, SAN switch upgrades, and participation in DR exercises.

Qualifications & Requirements:

• Education: Diploma or Degree in IT, Information Systems, Computer Science, Business IT, or equivalent.
• Experience:
  • Minimum of 3 years in enterprise backup solutions and SAN environments.
  • Hands-on experience with power cycling, SAN switch upgrades, and storage replication.
  • Exposure to data center shutdown activities and disaster recovery exercises.
• Technical Skills:
  • Proficiency with IBM V3700/V7000, EMC Unity/VNX, NETAPP, HP Nimble, Hitachi, EMC Isilon, and Cisco/Brocade SAN switches.
  • Experience with enterprise backup tools like NETBACKUP, Veeam, and IBM tape libraries.
• Soft Skills:
  • Strong analytical and problem-solving skills, with the ability to work independently.
  • Effective communication skills and customer service orientation.
  • Demonstrated leadership and team collaboration capabilities.
• Preferred Experience: Previous work with government sector clients is advantageous.

INFORMATION

Job Title: Process Engineer - Drive Innovation in Precision Manufacturing!

Company: A leading SME in precision component manufacturing with international presence.

Location: Singapore

ABOUT US

We are a dynamic and growing company specializing in the design and manufacture of high-precision metal components for automotive, appliances, energy, medical, photonics market. We are committed to innovation, quality, and customer satisfaction. We offer a collaborative and rewarding work environment where your contributions will have a direct impact.

ABOUT THE ROLE

We seek an experienced Manufacturing Process Engineer to join Operations team. The successful candidate will optimise manufacturing processes, improve productivity, and ensure high-quality products. This role requires strong technical knowledge, problem-solving skills, and collaboration with cross-functional teams.

KEY RESPONSIBILITIES

● Process Optimization:

○ Analyze and optimize zinc die casting processes to improve efficiency, reduce costs, and enhance product quality.

○ Implement process improvements, monitor results, and adjust as necessary.

● Process Design and Development:

○ Design, develop, and implement new die casting processes and tooling.

○ Collaborate with tooling designers to ensure optimal die design.

● Quality Control:

○ Develop and maintain quality control procedures.

○ Conduct regular quality audits to ensure compliance with industry standards.

● Equipment Maintenance:

○ Ensure proper maintenance of die casting machines and peripheral equipment.

○ Troubleshoot equipment issues and implement corrective actions.

● Safety and Compliance:

○ Ensure compliance with safety regulations and company policies.

○ Conduct risk assessments and implement safety improvements.

● Training and Development:

○ Train production staff on new processes and equipment.

○ Develop and maintain training documentation.

● Continuous Improvement:

○ Identify areas for improvement and propose solutions.

○ Lead or participate in continuous improvement initiatives.

● Collaboration:

○ Work closely with production, maintenance, and quality teams.

○ Communicate effectively with suppliers and customers.

● Project Management:

○ Manage projects related to process improvements, new product introductions, and equipment upgrades.

● Data Analysis:

○ Collect and analyze data to measure process performance.

○ Use data to drive decision-making and process optimization.

CANDIDATE’S REQUIREMENTS

● Bachelor's Degree or Diploma in Mechanical Engineering, Manufacturing Engineering, or related field.

● Minimum 3-5 years of experience in a manufacturing environment, preferably in molding/ casting or a related industry.

● Strong knowledge of metal component manufacturing and tool design.

● Experience with process optimization, lean manufacturing, and Six Sigma methodologies.

● Proficient in CAD software (e.g., SolidWorks, AutoCAD) and process simulation tools.

● Strong problem-solving, communication, and project management skills.

● Ability to work in a factory environment and prioritize multiple tasks.

● Advantage if candidate has experience in automation, robotics, and familiar with quality management systems (e.g., ISO 9001).

• To Project Management Coordinate with main-con & consultant for drawing submission, material sample submission & meeting with main-con and consultant.
• Select appropriate electrical materials to complete designs such as MSB, Distribution lighting fixtures, cable tray layout, lighting and receptacle layout, single line diagrams, CCTV, data Tel com operational routing diagram, and ELV systems. control schematic and wiring diagrams.
• Identify discrepancies in tender/contract / IFC drawings and raise queries for clarification, A&A (R&R) + Constriction Filed.
• Attend all operational matters related to the daily running of the project & Handle multiple projects simultaneously.
• Testing & commissioning for Electrical apparatus.
• QA/QC documentation review of engineering deliverables.
• LV & HV cables sizing calculation & prepare bill of material.
• Planning workforce arrangement & supervision & working planning.
• Giving progress reports regularly to teams & monitor project schedules.
• Prepare Electrical shop & As-builts SLD Rcp drawing

We are seeking a skilled Civil Engineer to oversee various aspects of construction projects including the installation of sliding wall steel formworks,column steel formworks and rebar installation. The candidate will also supervise concreting operations and manage estimation of Bills of Quantities, project progress claims and earthworks supervision. Proficiency in Autocad and knowledge of slope stability in earth erosion context are required.

Key Responsibilities :

-Good Team Player and Positive Attitude.

-Be able to work and coordinate with different groups both clients and sub-contractors

-Prepare project proposals and plan with management

-Assigning personnel and reviewing bids from contractors and vendors.

-Determines and maintains project schedule by given project plan and drawings

-Monitoring project progress respectively and resolving problems, attending site walks, inspections and Turn Ons

-Prepare Progress Claims monthly and submitting in time

-Control project costs and material usage

-Maintains a safe and clean working environment by enforcing procedures, rules, and regulations

-Drive the team to be on good quality control at all time

Requirement:

- At least a Diploma/Degree Holder in Electrical Engineering or its equivalent

- Minimum 1 year of working experience in relevant field.

- Prefer working experience in Fire Alarm System installation.

Working Location: Islandwide Project Sites

Working Hours: Monday – Friday, 8 AM – 5 PM , Saturday - 8 AM - 1PM

Salary Range: SGD 3,000 - SGD 4,500

Job Type: Full Time

The Wintel Engineer is responsible for specialized support in planning, installation, and administration of workplace management systems, focusing on endpoint and cloud infrastructure management. This role requires expertise in Windows-based environments, cloud services, and automation tools to optimize the deployment and maintenance of workplace solutions. Responsibilities also include enhancing operational procedures, ensuring system efficiency, and adhering to best practices.

Key Responsibilities:

1. Endpoint Hardware & Imaging Management: Install, configure, test, and maintain endpoint hardware and images, covering OS, applications, drivers, upgrades, updates, and hotfixes.
2. Patch Management & Software Distribution: Plan, implement, and oversee Patch Management and Software Distribution services.
3. Cloud Infrastructure Administration: Design, deploy, and maintain AWS and Azure services, ensuring scalability, security, and high availability. Manage services including EC2, VPC, S3, RDS, Lambda, IAM, Azure App Services, and SQL Database.
4. Cloud-Native Application Deployment: Collaborate with development teams to architect and deploy cloud-native applications, leveraging AWS and Azure capabilities.
5. Infrastructure Automation: Use infrastructure-as-code tools like CloudFormation or Terraform to automate and maintain AWS and Azure environments.
6. Troubleshooting & Issue Resolution: Diagnose and resolve issues related to AWS/Azure infrastructure, applications, and connectivity.
7. Disaster Recovery: Implement and manage backup and disaster recovery strategies for cloud resources.
8. Workplace Management Tools: Administer and troubleshoot backend services, with a focus on PC imaging, workplace management tools, and resolving desktop/server escalations.
9. Quality Assurance & Process Improvement: Conduct Quality Assurance testing on endpoint devices and contribute to the automation and streamlining of daily operational processes.
10. Documentation & Reporting: Maintain accurate documentation and generate reports to ensure clear communication and record-keeping.
11. Additional Duties: Support other duties as required to ensure the efficient operation of workplace management systems.

Qualifications & Requirements:

• Education: Bachelor’s Degree or Diploma in Electrical/Electronic/Computer Engineering or Information Systems.
• Experience:
  • Minimum 5 years of experience with Windows Servers, Active Directory, PowerShell, Group Policy Objects, and workplace management tools (e.g., HC BigFix, MS SCCM, Citrix VDI, Nexthink).
  • Proficiency in PC imaging deployment, patch management, and software distribution for both desktop and server environments.
• Technical Skills:
  • Strong understanding of AWS and Azure services, including infrastructure and automation (CloudFormation, Terraform).
  • Solid networking and security knowledge for AWS and Azure environments.
  • Familiarity with CI/CD pipelines, version control systems (e.g., Git), and scripting languages (Python, Shell).
  • Working experience with MSI technology, application packaging, and deployment processes.
  • Knowledge of custom actions, scripting, and Windows Installer technology for troubleshooting.
• Certifications: AWS or Azure certifications (e.g., AWS Certified Solutions Architect, Azure Administrator) are a plus.
• Soft Skills: Effective communication, documentation experience, strong troubleshooting abilities, self-driven, and able to work independently.

Responsibilities:

• Manages the Electrical, Instrument and Telecom discipline within construction to make certain product quality and well- timed deliver to commissioning
• Works closely with electrical design team to document project requirements and develop electrical work plan for electrical system and sub-systems construction, testing and commissioning
• Studies electrical drawing related to cable ladder, cable tray, penetration, system layout drawing, single line drawing and interconnection drawing
• Involves in electrical hot work fitting, cable termination, cable continuity check, megger test and Atex inspection
• Creates work package by area or by subsystem
• Plans resources manpower, materials, facilities and P6 scheduling
• Gives direction and assigns job to subordinates for job execution
• Prepares the work condition for subordinate to work eg. Materials, facilities etc
• Monitors progress in meeting the P6 schedule
• Applies Plan, Do, Check, Act methodology for all work activities
• Reports the daily work progress to EPCC
• Coordinates with Vendors, Sub-Contractors and Engineering

Requirements:

• Bachelor in Electrical Engineer/ Marine Engineering or other relevant disciplines
• Entry Level candidates are welcome to apply (On Job Training will be provided)
• Understand construction schedule and analysis of critical path
• Experience in managing Vendors and Sub-Contractors
• Able to handle project independently

Our Address and Working Hours:

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Tuas Yard

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

The Systems Engineer, Unix/Linux is responsible for managing and supporting Unix/Linux infrastructure in a 24x7 enterprise environment. This includes operational support, troubleshooting, deployment of updates, and maintaining service continuity to meet business requirements and service levels.

Key Responsibilities:

1. Unix/Linux Infrastructure Support: Manage and support Unix-based IT infrastructure, ensuring stable operations across Unix, Linux, Solaris, Redhat, AIX, and SUSE environments.
2. Troubleshooting & Root Cause Analysis: Provide expertise in diagnosing and resolving server and application issues, delivering root cause analysis as required.
3. Package Deployment: Deploy Unix/Linux packages and bug fixes across Test, Pre-Production, and Production environments.
4. Operational Administration: Oversee day-to-day operations for Unix/Linux environments, adhering to business needs and service level agreements (SLAs).
5. Change Management: Follow established change management protocols for infrastructure changes, including status reporting to relevant stakeholders.
6. First and Second-Level Support: Provide 1st and 2nd level operational support, including initial troubleshooting of third-party applications and collaboration with vendors for resolution.
7. Audit & Compliance: Participate in audit activities, respond to audit findings, and ensure compliance with relevant requirements.
8. Incident Response: Quickly respond to incidents, security alerts, and investigations, implementing temporary or permanent resolutions and providing timely updates to stakeholders.
9. Service Continuity: Implement and maintain continuity measures, such as backup/restore procedures and disaster recovery plans, to support ongoing business operations.
10. Documentation: Ensure all relevant documentation is updated and maintained.
11. 24x7 Support & After-Hours Work: Conduct necessary after-hours maintenance, such as patching, in alignment with the 24x7 operational requirements.
12. Additional Support Activities: Perform other Unix/Linux administrative tasks as needed and travel to other Singapore offices occasionally as required.

Qualifications & Requirements:

• Education: Minimum of a Diploma in Information Technology, Computer Science, or a related field.
• Experience:
  • At least 3 years of relevant experience managing Unix/Linux environments (Solaris, Redhat, AIX, SUSE) in an enterprise-level setting.
  • Strong experience in RedHat Clustering and Oracle Solaris Clustering.
• Technical Skills:
  • Proficiency in scripting languages and tools, such as Perl, Ruby, and AWK.
  • Knowledge of monitoring tools such as SolarWinds.
  • Familiarity with Microsoft technologies (Windows Server, Active Directory, Group Policy) is an asset.
• Work Environment: Typically 9 am to 6 pm, with flexibility required for after-hours work due to the 24x7 nature of the role (e.g., patching activities).

Responsibilities:

• Prepares the schedule and oversee the T&I activities as per project specifications and procedures.
• Manages the subordinates’ staff in the day-to-day activities and that project goals are met as per budget.
• Coordinates with several departments related to T&I of project.
• Supervises the performance of his team and should respond to the issues during T&I.
• Attends the Project meetings and update the status.
• Liaises and review with T&I companies’ regarding transportation and Installation process, approach and time-lines to de-risk changes to schedule.
• Develops and drive the logistics concepts for project from conception to completion.

Requirements:

• Bachelor’s degree in Electrical and Electronics Engineering or related engineering disciplines
• 3-5 years’ experience related experience
• Knowledge in EPC projects for O&G, Offshore Renewables & system
• Proficient in MS office applications
• Dynamic, self-motivated, proactive and results oriented

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd.

Admiralty Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description :

1. System Integration:

• Lead the integration of Building Management System applications with other building systems.
• Design and implement application solutions based on client requirements.

2. Client Interaction:

• Engage with clients to understand their specific needs and provide technical support during the implementation phase.
• Conduct training sessions for clients on BMS applications.

3. Testing and Validation:

• Conduct thorough testing and validation of BMS applications to ensure they meet quality and performance standards.
• Collaborate with quality assurance teams to address identified issues.

Requirements:

1. Diploma or Bachelor's degree in Computer Science, Electrical Engineering, or Engineering related field.

2. Minimum 2 years of experience in application engineering, with a focus on Building Management Systems (BMS).

3. Proficiency in PLC and DDC, SCADA and programming languages (such as Scripting, Function Block, etc..), communication protocols (not limited to BACnet, Modbus, Lon works, etc) and common Microsoft applications.

4. Experience with Siemens S7 PLC and winCC SCADA is an advantage.

5. Experience in IEC61508, EN50128 and any other standard.

6. Strong problem-solving skills and attention to detail.

7. Excellent communication and interpersonal skills.

Duties & Responsibilities

• To manage project cycle independently with minimum supervision.
• Work with external parties and customers to plan, organize and direct activities concerned with assigns projects.
• Develop project schedule in compliance with customer requirements, deadlines, and/or milestones, develop mechanisms to track schedule progress in the field and update the schedule regularly.
• Responsible for site activities , coordination and supervisions works related to engineering and system design.
• Ensure timely completion of all projects particularly T&C schedules.
• Responsible for project management including attending meetings, coordination, design and plan out shop drawing and submission, costing, ordering.
• Liaise with consultants, architects and contractors and handle all technical matters.
• Ensure project work compliance with Workplace Safety and Health (WSH) policies and practices.
• Attending site meeting and coordination with stakeholders, external parties and customers to plan, organize and other related activities for assigned projects.
• Other ad-hoc duties as assigned.

Job Requirements:

• Diploma and/or Degree in relevant fields of studies
• At least 2 years of relevant experience in Electrical or ACMV
• Able to manage the entire project cycle independently with minimum supervision