Job Description:

• Responsible to qualify and approve the WPS, PQR, WQT
• Ensure consumable control system is in place and followed up during issue, usage at site.
• Identify and develop the appropriate WPS for the project based on the parent metal and joint configuration.
• Establish welding sequence for the structure to minimize of control the distortion.
• Co-ordinate with Client and Classification body on welding related issues at site on day to day basis.
• Ensure regular updating and release of the Qualification welder list for module specific for the project
• Monitor calibration of Welding equipment and other measuring instrument used for inspection of welding
• Perform surveillance inspections related to following WPS requirements and NDT activities at site.
• Responsible to trouble shot the problems related to Welding and NDT.
• Establish welding sequence for critical structure to minimize / control distortion.
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about welding control and NDT requirements
• Coordinate with production team on corrective measures related to welding issues and NDT.
• Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval.
• Review NDT operator qualification and submit for project approval.
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing.
• Carry out Audit on NDT contractors to ensure compliance with project requirements.
• Propose improvements in welding process, products etc.

Job Requirement:

• Degree in Mechanical Engineeer
• Min 3 year experiences
• With IWE certification with exposure in NDT methods

No Deviation is a provider of patient-centric solutions for the pharmaceutical industry, and we are currently seeking individuals who are passionate about joining our team. Our areas of expertise include engineering consultancy, Commissioning Qualification Validation (CQV), as well as Quality, Compliance, and Regulatory services.

We strongly uphold our core values of Empathy, Integrity, and Transparency, and we strive to create a collaborative, innovative, and inclusive work environment that fosters personal growth and development.

By joining our team, you will have the opportunity to make a meaningful impact in the pharmaceutical industry while advancing your career.

Scope and Responsibilities:

• Lead the protocol generation and review for the assigned areas (i.e. process equipment, facilities, utilities and laboratory equipment)
• Review vendor or construction turnover document
• Review construction walkdowns to assure compliance with design
• Lead or direct execution of full C&Q project lifecycle, including URS, Design Verification, FAT, SAT, DQ, IQ, OQ and PQ etc.
• Trouble shooting equipment with a cross functional team.
• Manage summary report writing wherever required
• Verification of Construction Contractor’s Document deliverables (CTODs) and Vendor Document deliverables (VTODs).
• Support the review and revision of design document, wherever required.
• Liaise with identified stake holders, including suppliers/contractors.
• Provide SME input wherever required.
• Manage the assigned system handover.
• Support the management of project schedule.
• Compliant to quality and safety requirements.
• Complete trainings in a timely manner.
• Support company operation and business as required
• Any other project responsibilities specified in the individual OAN and organizational responsibilities assigned by management

Qualifications:

• Bachelor of Science/ Bachelor of Engineering or related scientific degree
• At least 3 years of experience in Pharmaceutical industry
• In-depth technical knowledge in the assigned area and associated regulatory requirements, guidelines, and other industry best practices. • Ability to work in a fast paced / dynamic work environment
• A fast learner with “Can-do” attitude
• Good time management skill and great attention to detail.
• Proficient presentation and facilitation skill is a plus.

Job Description:

• Responsible to qualify and approve the WPS, PQR, WQT
• Ensure consumable control system is in place and followed up during issue, usage at site.
• Identify and develop the appropriate WPS for the project based on the parent metal and joint configuration.
• Establish welding sequence for the structure to minimize of control the distortion.
• Co-ordinate with Client and Classification body on welding related issues at site on day to day basis.
• Ensure regular updating and release of the Qualification welder list for module specific for the project
• Monitor calibration of Welding equipment and other measuring instrument used for inspection of welding
• Perform surveillance inspections related to following WPS requirements and NDT activities at site.
• Responsible to trouble shot the problems related to Welding and NDT.
• Establish welding sequence for critical structure to minimize / control distortion.
• Prepare and conduct Project Specific Inductions/workshops/tool/box talk about welding control and NDT requirements
• Coordinate with production team on corrective measures related to welding issues and NDT.
• Review NDT procedures prepared by NDT sub-contractor as per project specification prior to submitting for client approval.
• Review NDT operator qualification and submit for project approval.
• Establish calibration and validation blocks required to demonstrate Ultrasonic Testing.
• Carry out Audit on NDT contractors to ensure compliance with project requirements.
• Propose improvements in welding process, products etc.

Job Requirement:

• Degree in Mechanical Engineeer
• Min 3 year experiences
• With IWE certification with exposure in NDT methods

Job Responsibilities:

1) Multi-manning of CNC machines for production of parts.

2) Ensure the optimum usage of all tooling.

3) Maintain all capital equipment that he operates.

4) Ensure that the output and quality goals meet the required specifications.

5) Observe all safe job procedures, safety rules and regulations and maintain good housekeeping.

6) Carry out TPM and maintain proper housekeeping within work area.

7) Participate in QHSE activities.

8) To carry out any other duties as assigned by Supervisor and follow up with work instructions.

Job Requirements:

1) More than 20 years of related CNC turning experience is required

2) NTC-2 or NTC-3 Certificate in Metal Machining is preferred

3) Strong knowledge of mechanical drawing & blueprint

4) Strong knowledge of CNC machine operation or setup

5) Strong understanding of CNC turning process

6) Strong understanding of CNC turning G code and M code

7) Ability to work under pressure

8) Good attitude and teamwork

Job Descriptions:

• Provide engineering support in achieving process optimization for Stamping Process
• Redesign stamping process by tooling modification and improvement
• Work as a team with production specialist to improve machine OEE result
• Perform 2D/3D simulation process to determine process capability/prediction to reduce trial & error mistake.
• Perform 3D CAD construction to CF/STP Profile Punch and Die for complex shapes which cannot be done in 2D.
• Any ad-hoc duties as assigned.

Job Requirements:

• Minimum Diploma in Mechanical Engineering, Precision Engineering or related disciplines is preferred
• Preferably experience in metal stamping environment
• Able to work under pressure and fast pace environment
• Willing to perform overtime if needed

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

About Us

Ingersoll Rand is an American multinational company that provides flow creation and industrial products. We offer high-quality commercial air compressors, industrial air compressors & compressed air services for a wide range of industries.

Job Summary

The Sales Engineer will be based in Singapore and is accountable to generate profitable sales revenue and increase operating income by broadening sales coverage, establishing new accounts, and providing total solutions for compressed air to customers in Singapore.

Responsibilities

• Identify and source new clients and business prospects (e.g., perform outreach to cold leads via calls and emails).
• Achieve sales target set for area of responsibilities and industries by building and maintaining close relationships with customers (incl. customer visits) to solicit for orders.
• Negotiate tender, contract terms and condition and prepare Sales contract.
• Prepare sales report, analysing cost and sales, quotations and maintaining and creating new client accounts.
• Provide pre-sales technical assistance (incl. demonstration & technical presentations), product training and after-sales support.
• Attending trade shows, conferences, marketing, and other events.
• Work closely with supply chain management, sales support and project engineer and order fulfilment team.

Basic Qualifications

• Diploma in Mechanical/Industrial Engineering or related fields.
• Sales experience with industrial products such as Air Compressors, Dryers or other similar equipment.
• Driving license & own vehicle.

Travel & Work Arrangements/Requirements

Site based, will be required to travel within Singapore to meet clients.

Key Competencies

• Customer Orientation
• Ownership
• Business Awareness

What we Offer

• Equity Grant
• Employee Insurance (Incl. Dependants)
• Medical Health Screening
• Outpatient Medical & Specialist
• Dental.

Job Responsibilities

• Create, or find and evaluate, better and more efficient ways to manufacture products, which involves techniques, processes, and procedures.
• Continuous improvement of product quality through leaner concepts and activities.
• Your success requires a broad knowledge of equipment and tools and the ability to effect change through influence.
• A Manufacturing Engineer works often hands-on, interacting with production personnel and with engineering and manufacturing groups to ensure lean plans are created and implemented.
• Design new Lean Six Sigma concepts or evaluate and implement existing concepts and best-in-class manufacturing techniques.
• Incorporate engineering specifications into design, process, or techniques and provide feedback to capture lessons learned.
• Create, implement, and monitor key performance indicators and metrics.
• Improve manufacturing process cost.
• Ensure solutions achieve required quality levels, reliability, and consistency.

Job Requirements

• Bachelor’s in industrial, mechanical, or electrical engineering with minimum 1 to 3 of relevant experience
• Good to have relevant combined manufacturing engineering and quality function experience
• Relevant experience in Oil & Gas industry will clearly be a plus
• Experience in handling failure investigations and ISO and API audits will be beneficial
• Familiar with CNC machines, leading process improvements, handling capex projects
• Understanding of lean six sigma methodologies will be beneficial

Job Description

1. Deploys Engineering decision-making to troubleshoot and resolve mechanical equipment breakdowns
2. Identify and address potential issues before they escalate to prevent unplanned downtime.
3. Achieving 0 LTIF target through ensuring safety procedures are followed through SOP, TRA, employees wearing full PPE during work, developing safety procedures
4. To support the section in terms of external resources/vendor management
5. To drive safety, cost, energy and reliability improvement projects in MSP through application of Mechanical integrity and quality assurance
6. Recommend and implement modifications or upgrades to enhance machinery reliability.
7. Maintain accurate records of maintenance activities, including repairs, replacements, and inspections.
8. Perform root cause analysis and work towards resolutions
9. Oversee all required engineering qualification tests on project; ensure compliance with all outside parties involved
10. Participate in test runs and field installations
11. Analysing and interpreting data
12. Stay updated on industry trends, new technologies, and best practices in mechanical maintenance.
13. Provide training to maintenance technicians and operators on equipment usage and maintenance procedures

Job Requirements

1. Bachelor's degree in Mechanical Engineering or related field.
2. Proven experience of supervising and managing mechanical site activities for large scale manufacturing project from inception to completion.
3. Strong knowledge of mechanical systems, hydraulics, pneumatics, and rotating equipment.
4. Possess strong leadership.
5. Possess strong orientation towards results.
6. Effective communication, both in verbal and written form English and Chinese.
7. Possess good teamwork capabilities
8. Possess good project and time management.
9. Ability to work to an ethical code of conduct

Bachelor's degree in Information Technology, Computer Science, or a related field

Mandatory experience as a System Engineer, with a focus on Microsoft Windows Server,
VMWare, and Nutanix hypervisor.

Hands-on experience with infrastructure as code (IaC) using Terraform for resource
provisioning

hands on exp in Active Directory, Certificate Services, Distributed File System, DNS
and DHCP server

Strong exp of various operating systems (Windows, Linux) and associated security
controls.

Secondary Skills (max 5 only)

Strong exp of cloud computing concepts, with experience managing resources on
AWS.

Exp in scripting with PowerShell for automation and management tasks

good exp with enterprise NAS technologies and protocols such as SMB and NFS

Relevant certifications (e.g., Microsoft, VMWare, AWS) are a plus

Advanced experience of Active Directory, Certificate Services, Distributed File System, DNS
and DHCP server

Main Roles and Responsibilities (max 5 only)

Configure and maintain virtualized environments using VMWare and Nutanix hypervisor,
optimizing resource allocation and scalability.

Utilize Terraform for infrastructure as code (IaC) practices, ensuring consistent and efficient
deployment of resources

Configure and maintain virtualized environments using VMWare and Nutanix hypervisor,
optimizing resource allocation and scalability.

Implement and maintain security configurations based on CIS benchmarks for various
operating systems, including but not limited to Windows and Linux

Develop and implement PowerShell scripts for task automation, system monitoring, and troubleshooting.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Qualification and Requirements

Strong technical background, self-driven and emphasizing job excellence. Good problem solving skills and interpersonal skill. Provide technical and product training to customers

• Diploma /Technical Certificates in Engineering or equivalent
• Min. 5 years relevant experience in servicing of equipment (electrical/electronics/mechanical)
• Good written, verbal, and presentation skills in English.
• Knowledge in Microsoft Office basic applications, including Word, Excel, Power-point.
• Demonstrate good skills and ability in technical troubleshooting
• Able to handle Chinese and dialect speaking customers
• Possess Class 3 driving license

Key Responsibilities

• Manage after-sales and service activities.
• Responsible for Equipment installations pre-commissioning checks and commissioning on sites.
• Coordinating field work involving troubleshooting, reporting and resolution of any emergent warranty issues.
• Responsible and manage warranty claims and matters and liaising with HQ on any warranty claims and reports.
• Technical back-up to field service staff to ensure technical queries are attended and settled prompt.
• Ensure completion of service task and submission report/expenses.
• Prepare quotation for service and spare parts enquiries.
• Customer relationship management
• Identifying training needs for service engineers/agent. Provide training for customers and staff.
• Contributes to team effort by accomplishing related results as needed.

Duties/Responsibilities:

• To identify new business opportunity and develop new customer base.
• To constant look out for new products to represent or distribute.
• To service and maintain good business relationship with existing customer
• To performs other duties as assigned.

Required Skills/Abilities:

• A bachelor's degree or diploma in engineering, marketing, business administration, or related field.
• Prefer 2-3 years' experience in Sales or Engineering field.
• Highly motivated and dynamic professional with self-initiative and sales skills.
• On Job training to be provided

Job Description

• To assist in contract administration which include cash flow/ budgetary forecasts, cost estimates, cost data analysis, tender evaluation, processing of payments, claims, variation orders and preparation of reports and approval papers
• To ensure that contracts are administered in accordance with executed contract documents

Responsibilities:

• Coordinate with internal operation, M&E and Design team for interfacing works affecting architectural items
• Attending meeting with client, consultants or sub-con to discuss all architectural related issues.

Requirements:

1.Master degree in engineering specialization in electrical and electronics engineering.

· Have experience in engineering life cycle of Power Projects and have gone through all phases of project starting from FEED stage to conceptual and basic design to detailed engineering, procurement, tendering, construction to commissioning.

· Programing skills PLC, SCADA

· At least 10 years’ experience in local project

Roles & Responsibilities

• To lead and execute site projects safely and effectively mainly in oil/petrochemical industry.
• To prepare RA, Work Method Statement on the job scope including quotations.
• To prepare and submit documents that Clients require prior to startup of the job.
• To oversee smooth and safe execution of site works.
• Identify and resolve technical issues and problems that arise during the project.
• Oversee budgetary and scheduling, and report regularly to project manager on progress as well as on problems that could significantly affect cost or schedule.
• Inform Supervisors promptly of any job or schedule changes and work closely with all the Client Representative to ensure requirements are met.
• Attend regular meetings at site and prepare Minutes of Meeting.

Qualification & Requirements

• Diploma/Degree in Mechanical Engineering or related disciplines
• Experience in leading and supervisory of site work execution process.
• Good communication and analytical skill to drive as individual.
• Candidates who possess OPSOC Supervisor and relevant certificate will have an added advantage.
• Preferably with at least 3-5 years’ experience in Oil & Gas and Petrochemical Industries.
• Knowledgeable in using MS Office especially MS Word and MS Excel.
• Familiar with ERP supply chain, procurement service portals and systems.
• Class 3 driving license will be advantageous.

Job Responsibility：

• Plan, organize, supervise and liaise closely with operation team and sub-contractors on all lifting activities.
• Overall in-charge for preparing lifting and erection plan for all the Gantry Cranes.
• Prepare, develop and review Lifting plans, Method Statement, Risk Assessment and Safe Work Procedure of all subcontractor for any lifting activities.
• Conduct routine checks and inspections on work site to ensure compliance with authorities and client’s requirements.
• Daily walk about around assign areas of site and make a note of compliance and non-compliance to HSE operating procedure.
• Able to prepare and review lifting plan and coordinate site lifting supervisors, riggers and signalman, and being the focal point for all site lifting operations Perform discipline checks of the procedures and analysis.
• Read project specifications and provide feedback from an engineering perspective. Liaise with clients, and subcontractors.
• To coordinate and interface with Client/ other contractors to harmonize the onsite lifting arrangement.
• To conduct safety assessment & discussion with EHS team (safety) for any latest safety policy and implement the safety requirement when needed.
• To periodically monitor and implement any procedural changes according to the local authority / client’s requirement & regulation updates.
• To periodically monitor and execute the lifting work improvement at lifting site inclusive all facilities/tools.

Job Requirements:

• Minimum 5 years site experience to oversee the activities of the various lifting supervisors on site, completed the "appointed persons - lifting operations course" conducted by IES or equivalent course approved by the engineer.
• Possess a Bachelor Degree in relevant engineering field.
• Have relevant experience and direct involvement in assembling, traversing and operation of lifting frame and/or any other systems adopted by the Contractor, and safety assessment of heavy lifting work.
• Able to communicate well (spoken and written).

Duties & Responsibilities:

• Carry out structural design and produce professional engineering calculation complying to Eurocodes and prevailing building control regulations
• Attending technical meetings with authorities, developer and contractors
• Prepare technical engineering report and draft for shop draawing
• Check shop drawing complying to design intent
• Assists Senior Engineers in day to day activity on the projects
• Other duties related to steel structure site erection

Requirements:

• Knowledge of Structural design software TSD, Prokon, and etc
• Good internal and external networking
• Bachelor Degree in Engineering (Civil and Structure)
• At least 3 years' local experience, ideally in structural steel design
• Able to do independent structural steel work design
• 5 years experience

About us

We are a global technology company, driving energy innovation for a balanced planet.​

Together, we create amazing technology that unlocks access to energy for the benefit of all.​

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse group of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Sourcing Specialist

Roles and Responsibilities:

As a Sourcing Specialist you must be able to implement sourcing plans and tactics to effectively manage the

assigned portfolio and associated activities. Your success is tested by your ability to maximize supplier

performance and supporting the company’s business plan for our advanced technology products.

HOW YOU’LL SUCCEED

• Must Implement plans to assure orders meet specified quality and delivery times and to minimize the
• total cost of purchases this is to ensure goods or service procured meet the requires quality standards
• and are delivered within specified timeframes which contributes to minimizes cost
• Document performance of action plans and timelines for assigned sourcing projects helps in tracking
• progress and identify areas of improvement .
• Establish supplier base in conformance with guidance from Category Managers which helps to provide
• guidance on the types of supplier needed.
• Handle requests for information, quotations, proposals, and bidding processes helps in cost analysis
• Evaluate current and potential suppliers in coordination with Supplier Quality Teams to help guide and
• fill in gaps that occur
• Negotiate with suppliers to meet quality, delivery, and cost objectives this ensures agreed-upon terms
• are met like cost and delivery schedules this also aids a good rapport between you and suppliers
• Execute contract negotiation and development in coordination with Sourcing Manager and Contract
• Specialists this ensures that legal and contractual aspects are aligned with the sourcing strategy
• Drive the parts and process qualification in coordination with Supplier Quality Teams this is vital in
• maintain a high standard of quality in the sourced products or service
• Work with Sourcing Manager or Sourcing Leader to guarantee supply for all portfolios.
• Establish and maintain rapport with all levels of supplier personnel and internal customers as building
• and amantaining positive relationships with both suppliers and internal customers is vital this fosters
• effective communication and collaboration throughout the sorcing process contributing to trust
• Identify opportunities and implement actions to achieve efficiencies helps in enhancing operational
• efficiency and contributes to overall organizational success

Qualifications and Experience:

• Master's or bachelor's degree in mechanical engineering, or manufacturing.
• Excellent verbal and written communication skills in English
• Eagerness to take on challenges and to learn new skills

· Responsible for all Electrical/Instruments/Electronic related matters

· Interpretation of all electrical & instrumentation drawings and coordinate with outsources on panel building, wiring, control sequence and PLC programming etc.

· Generate and prepare electrical wiring diagrams and installation of all electrical wiring works and control panel

· Building of system control panels, distribution/junction boxes

· Servicing, Testing and commissioning of all systems both in-house and on site (local and overseas)

· Setting and calibration of all instruments

· Trouble shooting of all electrical related problems

· Coordinate with production team on electrical installation for built systems

· Coordination with Customer on job related matters

· Provide support to Mechanical Engineer and procurement on technical aspects

· Liaise with suppliers (electrical items)

· Assist in Mechanical services

· Other Ad-hoc Duties when assigned

· Graduate with Electrical Engineering from ITE or Polytechnic

· At least 2 years of related experience

· Knowledge of Control Panel is an advantage

· At times require to attend site job at customer premises

· Transport provided in Boon Lay

· Willing to travel when assigned

· Please include your current and expected salary in your resume

1. Developing and implementing quality standards;
2. Developing and implementing quality management systems (QMS).
3. Organizing internal audit based on QMS standards (such as ISO9001, IATF16949, vda6.3) and supplier audits.
4. Determining quality metrics, monitoring and analyzing the performance;
5. Inspecting and testing products, raw materials and processes to ensure quality specifications are met.
6. Collaborating with different departments to develop and implement controls and improvements.
7. Ensuring that workflows, processes, and products comply with QMS requirements and customers’ expectation.
8. Investigating and troubleshooting product or production issues.
9. Developing corrective actions, solutions, and improvements.
10. Reviewing codes, specifications, and processes.
11. Formulation and Process Optimization.

What you will do:

Installs basic required system field devices and commissioning using standard configuration and

commissioning tools. Troubleshoots and resolves problems. Responds to basic warranty calls. Keeps

JCI, contractors, and the customer informed of job progress and issues as needed.

How you will do it:

• Responsible for attending to system breakdown calls and carry out scheduled preventive

maintenance.

• Coordinate and monitor work progress with the customer and relevant parties for information to

expedite installation and supervise sub-contractors work at the site.

• Check and ensure all installations conform to project specifications, and be able to manage

system applications, drafting, database generation and commissioning of the systems under your

care.

• Perform 24/7 standby duty for complaint and breakdown.

• Ensure safety procedures and conduct during service or repair.

What we look for:

• ITE/Diploma

• Minimum 1 year’s relevant experience handling preventative maintenance, repair, installation,

commissioning, and general servicing activities.

• Service experience in the fire protection field/BMS/Security systems required for this role.

• Entry level candidate are welcome to apply.

About us

We are a global technology company, driving energy innovation for a balanced planet.​

Together, we create amazing technology that unlocks access to energy for the benefit of all.​

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse group of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Technical Development Program Engineer

Roles and Responsibilities:

As a Technical Development Program Engineer (TDP), you will embark on a transformative 2.5-year journey

within our esteemed Engineering Design Team. This role is designed to provide a holistic and immersive

experience in various functions, including the exciting possibility of overseas assignments, allowing you to gain

a comprehensive understanding of our engineering processes and systems.

HOW YOU’LL SUCCEEED

• Engage in rotational assignments spanning different facets of the Engineering Design Team, including
• but not limited to product design, system integration, and process optimization.
• Collaborate with cross-functional teams to develop a well-rounded skill set, fostering adaptability and
• expertise in diverse engineering domains.
• Actively participate in real-world projects, applying theoretical knowledge to practical scenarios.
• Contribute to the conceptualization, development, and implementation of cutting-edge engineering
• solutions.
• Contribute to global projects that may involve working with international colleagues, fostering a crosscultural understanding of engineering practices.
• Benefit from personalized mentorship by seasoned professionals within each rotation, ensuring a
• supportive learning environment.
• Access specialized training programs tailored to enhance technical skills and industry knowledge.
• Cultivate a mindset of innovation by addressing challenging problems within each rotation.
• Receive constructive feedback and performance evaluations, guiding your growth throughout the
• program.
• Joining our Technical Development Program as an Engineer offers a unique opportunity to immerse
• yourself in a dynamic and collaborative engineering environment. Through rotations, hands-on
• projects, mentorship, and continuous learning, you will emerge as a well-rounded professional poised
• for success in the ever-evolving field of engineering.

Qualifications and Experience:

• Master's or Bachelor's Degree in Mechanical Engineer, Aerospace Engineer or Mechatronics Engineer
• Excellent verbal and written communication skills in English
• Eagerness to take on challenges and to grow your career in Technology and Innovation

Responsibilities:

• Coordinate and work closely with Project Manager to oversee site matters and provide technical support such as interpret construction drawings
• Ensure all technical drawings conform to the latest BCA codes and regulations
• Supervise site progress and ensure timely delivery of contract works from subcontractors/suppliers
• Manage subcontractors/suppliers to perform their respective scope of works for smooth project execution
• Conduct regular site inspections and enforce in-house regulations
• Attend site meetings to assist the Project Manager with necessary preparatory works
• Liaise with relevant government agencies to obtain necessary site permits/clearances
• Any other ad-hoc duties as instructed by superiors

Job Qualifications / Requirements:

• Possess a recognised Degree or Diploma in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management and at least 3 years of relevant working experience of the building construction industry

or

• Degree in local universities in Architecture / Civil / Structural / Mechanical / Electrical Engineering, Building Science, Building Management, Building Services Engineering, Construction Management
• Strong knowledge in use of Autocad, BIM software such as Revit and microsoft projects

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is looking for an Research Engineer II (Research Project Management Officer) to oversee operations, manage lab equipment, and maintain a safe, efficient environment. Responsible for coordinating equipment, ensuring compliance with safety standards, and leading a team towards successful research and development outcomes.

Key Responsibilities:

• Lead and coordinate concurrent research projects together with Corp Lab director, PIs and ensuring they are completed within time and budget, and meet quality standards.
• Oversee research laboratory and facility operations, ensuring safety and efficiency of research activities in Corp Lab. Uphold all relevant health and safety regulations from university within the laboratory.
• Coordinate equipment scheduling, delivery, and maintenance together with researchers and project PIs
• Management of research activities associated with inventory, budget, and liaise with various research programs and departments.
• Lead and train laboratory research staff, fostering a collaborative environment.
• Stay updated on technological advancements and implement quality controls.

Job Requirements:

• Bachelor’s or Master’s degree in a scientific, engineering, or related field.
• Research and development knowledge in nanotechnologies and thin film technologies are highly sought.
• Proven experience as a Laboratory Manager or in a similar role, with a strong focus on laboratory and facilities management.
• In-depth understanding of research laboratory equipment, operations, and principles.
• Exceptional organizational, leadership, and decision-making skills.
• Proficiency in relevant software, laboratory information systems, and tools.
• Effective communication and interpersonal skills, capable of maintaining robust working relationships.
• Added Advantage: Experience working in research institutes or a university environment, demonstrating familiarity with the specific operational, regulatory, and audit/compliance aspects of these settings.

We regret that only shortlisted candidates will be notified.

About us

We are a global technology company, driving energy innovation for a balanced planet.​

Together, we create amazing technology that unlocks access to energy for the benefit of all.​

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse group of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Manufacturing Engineer (Mechanical / Electrical)

Roles and Responsibilities:

You as a Manufacturing Engineer have a key driver of vital functions in more than one phase of bringing new

technology to market. They create, or find and evaluate, better and in more efficient ways to manufacture our

products, which involves techniques, processes, and procedures. In all phases of manufacturing, however,

your main goal is the same: continuous improvement of product quality through leaner concepts and activities.

HOW YOU’LL SUCCEED

• Resourcefulness and innovativeness are important to innovate existing manufacturing or to create
• Lean Six Sigma concepts this can help product improvement and you to possess problem solving
• skills
• Being a good reviewer for engineering designs and processes helps your quality improvement and
• helps them be more innovative and adaptable
• Creating, Implementing and Monitoring quality of Key Performance Indicators and Metrics you in
• Performance Evaluation and Process Improvement
• Cost Analyzing Manufacturing costs could help the company gain profits and aids you to better budget
• and have more control over cost which gives the engineer a sense of confidence.
• Always ensure that solutions meet quality levels, reliability and consistency this helps reduce defects
• and Returns and Risk mitigations

Qualifications and Experience:

• Master’s, or Bachelor’s in industrial, mechanical, or electrical engineering.
• Excellent verbal and written communication skills in English
• Eagerness to take on challenges and to learn new skills

Job Description & Requirements

Key Responsibilities:

- Assist HOD to meet daily production targets, schedule and quality standard

- Plan manpower, draw up duty roaster for operators and technicians; allocating work and plan & authorize the overtime accordingly

- Work closely with production planner to meet the on-time shipments schedule

- Compilation and monitor department KPI

- Work with various departments / engineering group in cross functional efforts to resolve the production related issues

- Identify potential issues within area and work with internal and/or inter-department teams in implementing proactive measures to prevent future occurrence.

- Drive Continuous Improvement initiatives and projects in department

- Support HOD in ISO documentation- Any adhoc assignments or covering duties as assigned by superior.

Requirements:

- SPM/ GCE O Level / Higher Nitec with min 5 years manufacturing experience

- Diploma with min 2 years of manufacturing experience

- Competent in MS Office (Excel, Word)

- ERP or MES experience is an added advantage