We specialize in providing innovative solutions for the implementation, installation, commissioning and maintenance of IoT, SCADA, Remote Monitoring, Security and Process Control Systems

Responsibilities

• Use designer tools to define delightful, animated, user-friendly SCADA screens, so that information is shown correctly, easy to read and find
• Use of configuration tools to configure IO points to interface with field controllers
• Plan and perform in-house/on-site software testing activities, retrieve and analyze log files, as well as assist in implementing technical fixes, patches and upgrades
• Timely report of work progress, issues to direct supervisor
• Any ad-hoc task as assigned by manager

Prerequisites

• Diploma in Engineering or any other similar disciplines
• Work or internship experience in any of the 3rd party SCADA system (such as Wonderware, iFix, Citect, Ignition)
• Able to work independently, meticulously and outcome driven with good eye for details
• Take ownership of UI design work is a must
• Able to interact and communicate effectively with people of different levels and cultures, and provide timely delivery of assigned work

Key Responsibilities:

• Development of Analog/Mixed-Signal circuits from specifications to prototypes.
• System-Level analysis and evaluation, full-chip architecture design, analysis, modeling, simulation, and integration.
• Schematic entry, corner simulation, layout consideration, and post-layout simulation.
• Work closely with the layout engineer to conduct the physical implementation (layout) and chip floor planning.
• Responsible for post-layout extraction and parasitic analysis.
• Able to work with other designers, Chip Architects, and layout engineers to achieve full-chip integration, place and route, top-level verification, and tape out.

Requirements:

• Ph.D./Master/Degree in Electrical Engineering or Microelectronics with excellent technical background in Analog /Mixed-Signal IC design
• Min. 5 years of experience in CMOS Analog IC design and simulation
• Good design experience in Analog IC design involving two or more of the following blocks: low noise pre-amplifier (low offset, high CMRR, high PSRR and bandwidth up to 600MHz), CMOS Gigahertz Oscillator, switched capacitor circuit, LDO, Differential Amplifier, comparator, Opamp, TIA, and Bandgap Reference and high-frequency full-wave rectifier, etc.
• Good design knowledge in ESD and Latch-Up.
• Experience in isolator devices (capacitive-coupler or optical-coupler), Photodetector-associated circuits will be an added advantage.
• Experience with sigma-delta modulators and IO drivers will be an added advantage.
• Good working knowledge of relevant analog IC design and simulation tools (Spice or its equivalent)
• Basic understanding and can develop simple design-related scripts with some common script languages, such as perl, Tcl, matlab or cadence skill etc.
• A team player with good communication skills.
• Able to work independently, flexibly, and creatively.

Job Description

• Ensure the camera system is set up according to the production plan which include the optical, electronic special effects and autocue system.
• Perform creative camera work and able to offer alternative angles for production needs whenever required on various operational modes (i.e Tracks, Tripods, or Handheld). Knowledge in Jibs, Underwater and Steady Camera.
• Work with stakeholders during production to ensure best visuals are captured i.e. camera position, techniques and angles of shots, and ability to problem solve on the spots to ensure output quality not compromised.
• Keep up to date with industry filming methods and equipment, receptive of innovating ways of filming.

Job Requirements

• Nitec in Electronic / Electrical Engineering or Diploma in Film Production.
• Good working knowledge of camera systems, lenses and camera support equipment.
• Preferably 3 years of related working experience.

Job Title: Network Engineer (ID4351)
Location:Tiong Bahru
Working Hours: Mon to Fri 8.30am-6.00pm
Salary: $4000-$5000


Job Description
• Provide L2 tech support and diagnose problems through onsite or remotely troubleshooting
• Install, configure, troubleshoot and support (after-sales) networking & network security equipment (major brands)
• Provide technical support and network consultancy service from time to time
• Maintain network documentation
• Ability to oversee customers’ requirements and translate to feasible solutions &/ or design
• Taking ownership of customers’ technical issues reported & tracking them through resolutions timely and escalate to appropriate channels when applicable
• Install, support and maintain hardware and software network infrastructure according to best practices including routers, switches, wireless access controller/ point, firewalls etc
• Evaluates existing network equipment and/ or users’ needs to analyse, design, recommend and implement system changes
• Adapt and support to enhancement and change to network configurations, whenever deemed necessary
• Support technical needs in the company and/ or clients’ environment through integration of new and existing technologies
• Assist enterprise solution/ sales team in joint-calls with working business partners & technology key vendors in products demo, PoC sessions, sit-down discussion, site survey, attendsite briefing etc. for projects related meetings

Requirements
• Knowledge in network topology
• Ability to configure major brands of firewall devices
• Ability to configure major brands of endpoint protection software
• Ability to setup/ manage network switches (e.g. configure VLAN and L2 switching)
• Ability to setup/ manage wireless network devices
• Advantage if you have good knowledge in enterprise network equipment & network security – including technical presales pitching &/ or hands-on experience
• Advantage if you have good knowledge on WAN network: MPLS VPN and IPsec VPNs, SSL
• Diploma/ Degree in Information Technology IT/ Telecommunication / Computer Engineering or relevant IT certifications
• Prefer someone (but not a must) with Cisco CCNA/ CCNP certificate or other equivalent network certificate
• Min. 3 years of expertise in implementation / administering and troubleshooting network and IT infrastructure equipment
• Must be resourceful and able to take initiative in a dynamic environment
• Strong written and oral communication skills
• Ability to handle documentation and explaining network and IT architecture
• An advantage if candidate from similar industry/ worked in SI environment
• An added advantage if candidate has system infra knowledge experience
• Well-versed in firewall e.g. Fortinet, Sonicwall will be major advantage

Job Title: System Engineer (ID4397)
Location: Tiong Bahru
Working Hours: Mon to Fri 8.30am-6.00pm
Salary: $3000-$4500

Job Description
• Manage the IT infrastructure includes Azure Cloud, hardware and software application and provide support to end-users
• To perform the installation of updates and patches for all IT systems including planning for scheduled preventive maintenance
• To manage in-house POS system and related hardware
• To explore new, faster and business processes and implement analytics for meaningful decision for management
• To ensure that all automated system processes (data backup etc.) and scheduled tasks (batch jobs) are properly carried out on time
• To update and maintain asset list for all hardware and software
• Prepare and maintain up-to-date documentation including SOP, user guide, network layout, system design and configuration
• Perform other duties assigned by management

Requirements
• Knowledge in network topology
• Ability to configure major brands of firewall devices
• Ability to configure major brands of endpoint protection software
• Ability to setup/ manage network switches (e.g. configure VLAN and L2 switching)
• Ability to setup/ manage wireless network devices
• Advantage if you have good knowledge in enterprise network equipment & network security – including technical presales pitching &/ or hands-on experience
• Advantage if you have good knowledge on WAN network: MPLS VPN and IPsec VPNs, SSL
• Diploma/ Degree in Information Technology IT/ Telecommunication / Computer Engineering or relevant IT certifications
• Prefer someone (but not a must) with Cisco CCNA/ CCNP certificate or other equivalent network certificate
• Min. 3 years of expertise in implementation / administering and troubleshooting network and IT infrastructure equipment
• Must be resourceful and able to take initiative in a dynamic environment
• Strong written and oral communication skills
• Ability to handle documentation and explaining network and IT architecture
• An advantage if candidate from similar industry/ worked in SI environment

Key Responsibilities:

• Develop power measurement device with wired & wireless connectivity.
• Design & Develop firmware for HEMS (Home Energy Management System), IoT gateway, and Human-Machine Interface products.
• Develop peripherals using MCU/DSP.
• Develop applications/products based on the Linux Platform.
• Conduct design reviews, bug fixes and update/create design documentation.
• Work with other team members to test and verify system-level functionality.

Requirements:

• Bachelor/Master of Electrical/Electronic/Computer Engineering
• Min. 5 years of working experience in R&D or product development as a firmware engineer.
• Extensive experience in Embedded Programming using C/C++/Rust for Embedded Linux and MCU
• Experience in real-time operating systems (FreeRTOS…etc.)
• Source code control and management using Git.
• Knowledge of Python to create debugging scripts.
• Experience in coding and debugging various communication interfaces and protocols (I2C, SPI, UART, Modbus RTU/TCP, RS232/485)
• Experience in wireless communication systems and protocols (IEEE 802.15.4, Wi-Fi, Bluetooth, Zigbee, Thread, LTE, NB-IoT, LoRa)
• Able to read schematics, and utilize Oscilloscopes and other test equipment to debug Firmware issues.
• Remote firmware update and bootloader design

Responsibilities:

• To support your Team Head in managing the RMA team to deliver reliable railway infrastructure for safe passenger service through cost-effective maintenance of the track, conductor rail and civil structure systems respectively
• Achieve complete understanding and alignment to our company Safety & Health, Security and Asset Management policies
• Achieve complete understanding and alignment to our department Vision, Mission and Core Values and communicate these to your RMA team for their necessary complete understanding and alignment
• Achieve complete understanding and alignment to our department maintenance plans
• Participate in night work and emergency recovery activities when necessary
• Achieve operational understanding of Rail Maintenance fundamentals
• Achieve operational understanding of DTL’s Rail Maintenance Preventive Maintenance (PM) Works
• Achieve operational understanding of DTL’s Rail Maintenance Corrective Maintenance (CM) Works
• Achieve operational understanding of our possible mitigation and recovery methods for conditions exceeding the DTL track alignment tolerance limits
• Achieve operational understanding of our detection systems
• Review and participate, when necessary, in the planning of the preventive maintenance (PM) regime for your RMA team to ensure practicality and alignment to their rostered work schedule
• Deploy prudent resource management and prioritization to facilitate productivity and timeliness in implementing the planned RMA PM regime to achieve the New Rail Financing Framework (NRFF) maintenance KPIs
• Review and participate, when necessary, in the planning of the corrective maintenance (CM) regime for your RMA team to ensure practicality and alignment to their rostered work schedule
• Maintain an active and up-to-date database for DTL Rail Replacement Summary
• Track and analyse DTL track alignment data to recommend the next courses-of-action, which may include mitigation and recovery processes
• Develop, review and maintain work instructions and respective risk assessments for your RMA team maintenance processes in a timely manner to ensure the contents are relevant, up-to-date, practical and aligned to OEM recommendations and best practices
• Participate in all maintenance, system and safety audits related to your RMA team
• Develop and communicate emergency response plans and drills to your RMA team for timely implementation when necessary
• Organize regular communication and feedback sessions with your RMA team
• Monitor the performance of each RMA team member to recommend commendation and disciplinary action, when necessary, to your Team Head
• Identify RMA staff with high potential and recommend their progression plans to your Team Head for succession planning
• Support your Team Head in LTA or our department projects related to your RMA team
• Assist in taking over of tracks of DTL new stations and depots
• Manage and supervise contractor maintenance of rail
• Develop and implement failure management and emergency response procedures and processes

Requirements:

• Recognized Degree in Engineering
• Adept in strategic-planning, analysis and decision-making
• Adept in resource and criticality prioritization
• Good interpersonal, communication, collaboration, negotiation and presentation skills
• Growth mindset with good accountability
• Team management
• Curious approach to self-learning
• Self-motivated, resourceful and process-oriented to achieve positive outcomes
• Must be able to differentiate colors for work purposes

By submitting this application for this position, you acknowledge that you have read the Data Protection Policy for Job Applicants (the “Policy”) of SBS Transit Ltd and its subsidiaries, affiliates and related corporations (‘SBST”) and consent to:

a. The collection, use and disclosure of your personal data by SBST for the purposes of your application and potential employment with SBST and the purposes set out in the Policy: and

b. SBST’s retention of your personal data for 2 years for consideration of future job opportunities (where applicable) from the date of submission of application.

We regret to inform that only shortlisted applicants will be notified.

• Managing the planning and design stages of construction projects.

• Contributing technical expertise to project drawings and designs.

• Performing cost calculations and preparing financial projections.

• Preparing work schedules in collaboration with the project manager.

• Liaising between contractors, subcontractors, vendors, and suppliers.

• Overseeing construction engineering processes.

• Performing regular tests on materials and procedures to ensure compliance with industry regulations.

• Ensuring that the construction project is completed on time and within budget.

• Documenting processes and keeping detailed construction logs.

• Presenting construction project progress updates to clients and senior managers.

Job Description & Requirements

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

General information

As a Service Engineer, you will be responsible for executing Service work with low to medium complexity according to work instructions and in accordance with ABB standard processes, quality standards and safety guidelines.

Reporting to Service Manager, you will be delivering quality customer service to satisfy customers. In close co-operation with customer and other ABB teams, take actions to identify new Service business opportunities for ABB.

Health and Safety

• Apply safety rules and safe practices as well as environmental responsibilities
• Report unsafe practices and incidents

Service Delivery

• Execute after sales business activity preventive & condition based maintenance, trouble-shooting, repairs and commissioning.
• Actively coordinate with operation supervisors for optimal service potentials from regular customer interactions.
• Proactively involve in self learning and practical exposure for continuous competence and productivity improvement.
• Maintain high level of personal leadership on safety and quality on work performed as well as documentations.
• Reports early any technical/contract/quality/program/cost issues to management, along with recommendations for resolution.

Additional Requirement

• Understand customer needs & manage customer relationships
• Co-operate actively with other ABB units to achieve common targets
• Support sales team

Leadership

• Provide leadership and coordination for the service team
• Create and develop good team spirit

Continuous improvement

• Proactively identify area of improvement eg. Self-technical knowledge, job safety and etc
• Participate in discussion, meeting, training and e-learning

Your background

• Diploma, ITC or equivalent in Electrical/Electronics engineering with at least 3 years hands on repair and service experience on electrical equipment.
• Experience on LV & MV VFD will be an advantage
• Strong electrical or electronics engineering fundamental knowledge. Knowledge on theory, structure, application, testing methodology and component fault diagnosis/analysis will be added advantage.
• Strong self-discipline with initiative and learning spirit with positive attitude, team work and responsibility.

Roles & Responsibilities

The Production Planner is first point contact for customer services in relation to queries in regards to lead times, scheduling and delivery for orders related to production. They are responsible for issuing and tracking of work orders, communicate with internal customers (as well as external customers upon required) of the orders and other requirement and response promptly of the planning and information of job completion in advance. They are also responsible for expediting and prioritizing work orders and coordinating and managing weekly and monthly production and resources planning.

Key Responsibilities:

· The Production Planner is first point contact for customer services in relation to queries in regards to lead times, scheduling and delivery for orders related to production. They are responsible for issuing and tracking of work orders, communicate with internal customers (as well as external customers upon required) of the orders and other requirement and response promptly of the planning and information of job completion in advance. They are also responsible for expediting and prioritizing work orders and coordinating and managing weekly and monthly production and resources planning.

· Understand and analyze of sales order releases with respect to in-house production (Threading, Duct, and material requirements);

· Contact and follow up with customer services and/or customers for complete information whenever required;

· Reviews Master Production Schedule and work orders, expediting and prioritizing work orders and revises schedule according to work order specifications;

· Coordinates and expedites the placement of purchase for tools, material and service and/or delivery of material;

· Preparation of the Production related delivery DO in the ERP system and making the arrangement with logistics partner for delivery;

· Coordinate work order scheduling with Production Supervisor/Leader/Lead Operator;

· Schedules and coordinates within or between departments (sales, inventory, production and logistic) to expedite production and delivery;

· To follow up work orders and notify customer service, sales or customers of availability/lead-times or any activity concerning their order status;

· Initiates replacement orders for lost, damaged or discrepant items;

· Support manufacturing practices such as Lean Manufacturing strategies.

· Managing and preparing daily, weekly and monthly production schedule and reports.

· Assisting with generating purchase order, close follow up on the receipt of goods ensuring in line with agreed timelines;

· Coordinating with Sub-Contractor for services, close monitoring and follow up to ensure agreed deadlines are met;

Job Description

Common accountabilities:

- Proficient in technical knowledge to ensure team performs at a high level. Is recognized as a leader in own area and may formally train Specialists/Senior Specialists. ​

- Understands how main business drivers may impact on own area. Can assess complex problems with broad impact on the activity, improve processes, recommend solutions and risk mitigation plans. Able to communicate complex information.​

- Works with a high level of autonomy, based on management directions. Leads projects or contributes to broad cross-functional projects. May contribute to planning of resources and budget.

Specific accountabilities:

Engagement management:
* Plan and manage all solution-oriented activities of IT bid projects including additional services
* Be the prime Amadeus point of contact for the customer on functional and technical matters
* Lead amadeus functional and technical SMEs interacting with the customer
* Ensure optimised use of customer and Amadeus ressources during the engagement phases (familiarisation, gaps indentification, gaps description, scope optimisation...)
* Coordinate the joint elaboration of the solution design
* Identify and manage all potential competitive threats and risk associated with the solution
* Ensure effective handover of IT sales projects to project implementation teams

RFP/RFI engagements and unsolicited proposals:
* Set up high-level project timelines for the RFP answer. Identify & secure resource requirements from relevant groups (PMs/Dev/ADP) and coordinate all components/inputs to the answer
* Produce solution-related documentation for IT customer proposals

* Produce solution-related documentation for IT customer proposals & prepare the response document for submission

*Lead all T2RL bids with all processes complied as per T2RL portal requirements.

Scope definition and approval process
* Support Technical Scoping workshops in identifying and referencing all interfaces to be developped. Interaction with Amadeus and customer senior management required
* Coordinate different functional streams on the customer side with Amadeus PM and Product Definition teams in order to ensure end to end solution consistency
* Minimize functional and technical gaps throughout the sales engagement
* Coordinate the approval process ensuring sign off of customer and Amadeus groups

Sales support during Commercial and Contractual discussions
* Ensure alignment between the proposed solution with the commercials
* Support Sales in contract negotiations for solution-related issues and review solution-related contract schedules

Portfolio evolution
* Feed market & customer solutions requirements to Product Management for product qualification (private or community product, itemised product ot included in baseline)
* Whenever possible, analyse solution offerings of competitors and inform Product Management and IT Marketing accordingly

About ideal candidate

• Master degree in computer science, or MBA
• Proven experience and passion for pre-sales, experience on RFP/RFI process, T2RL processes, hands-on live product demos
• Minimum 10yrs experience in Airline IT product presales or product marketing.
• Proven skills in using data to drive solution decisions.
• Ability to set and manage priorities judiciously.
• Effective communication skills towards customers, executive stakeholders, and teams.
• Motivated self-starter with the ability to learn and adapt.
• Experienced in project management, stakeholder coordination & senior management reporting.

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description & Requirements

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Responsibilities

• Perform risk assessments to ensure all measures are taken to prevent injuries or accidents before commencing any work
• Initiate and lead projects relating to cost reduction, efficiency/power, and reliability improvements.
• Work with stakeholders from cross functional teams to establish the project timeline, the execution plan and identify the resources required
• Ensure the timely completion of key milestones as well as delivery of key project indicators.
• Lead in resolving any quality issues and providing timely updates on the progress.
• Perform data analysis to identify opportunity for improvements or support any ongoing investigations

Requirements

• Min Degree in Materials / Chemical Engineering
• Strong knowledge and experience in process integration & development methods
• Knowledge in PFMEA, DFMEA, DOE, Fish-Bone Analysis
• Strong technical analysis competency with the use of analytical tools like JMP, Mini-Tab for troubleshooting and datamining
• Ability to work in a fast-paced environment and render support to production as and when needed

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Trendlines Medical Singaporeoperates through investing in, incubates, and provides a range of critical services to nurture and support Singapore-based entrepreneurs and start-up companies in the medical device sector from development to commercialization in the global market.

We are looking for Senior/Product Engineer (Medical Devices) to join one of our portfolios located in Singapore. More about us and our portfolios: https://www.trendlines.com/business-units/medical-singapore/

Roles & Responsibilities:

• Perform design improvements to our existing products, in areas of electrical/electronic and pneumatic systems.
• Conduct bench test, perform design verification and validation of design in accordance with ISO 13485 and applicable regulatory requirements.
• Lead transfer of product design to contract manufacturer in areas of assembly, manufacturing, test, quality and cost.
• Troubleshoot issues, provide design solutions, verify and validate solution and coordinate implementation.
• Liaise and manage contract manufacturer and production processes, ensure consistent quality conforming to medical device standards. Involve in the design and fabrication of jigs and fixtures for production assembly and test.
• Perform supplier sourcing and qualification for assembly/sub assembly/part.
• Perform risk assessment for design and process, drive recommended action to closure.
• Possess ownership of engineering documentation as per SOP
• Perform other tasks as required to meet project timeline and objective.

Skills & Requirements:

• Bachelor’s Degree qualifications in electrical & electronics engineering, biomedical, mechanical, or related engineering fields
• Minimum 3 years’ experience in product design modification and improvement for the medical device industry
• Knowledge of medical device regulatory, ISO13485, IEC62304 standards
• Some knowledge of microcontrollers and embedded firmware application will be advantageous.
• Experience in manufacturing preferred
• Initiative, self-motivated and able to work independently in the defined scope of work.
• Company objectives driven mindset, with company shares allocation based on performance.

- Candidate must possess at least Bachelor's Degree/Post-Graduate Diploma/Professional Degree in Engineering (Civil) or equivalent.

- At least 5 Year(s) of working experience in the construction-related projects

- Abilities to work with Consultants

- Required Skill(s): AutoCAD, project management, good communication skills, good personal-relationship skill

- Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Engineering:

· Participate in several phases of Projects from concept development, tender, bids, FEEDs, construction, commissioning, execution, modification to completion

· Participate in designing the FPSO, typically including:

Ø Contribute with input to philosophies and design specification for Process

Ø Participate in preparation of technical specifications for topside process modules

Ø Help to develop PFDs, P&IDs, data sheets, etc.

Ø Help to develop material take-off and cost input for Process discipline

Ø Help to ensure the design meets regulatory, class, client and corporate requirements

Ø Give input to the master equipment list

Ø Perform Process calculations and simulations with guidance

Ø Participate in project HAZOP sessions

· Participate in Process discipline activities and provide input to develop and maintain company engineering standards and best practices within the field

· Actively contribute to the development of relevant RFQ’s for module yards, integration yards, newbuild shipyards and equipment packages and prepare technical bid evaluations (input)

· Follow-up with design development, construction and testing activities

· Review vendor documentation to ensure compliance with project requirements

· Proactively support and cooperate with all engineering disciplines to achieve optimal design results including relevant input and comments to other discipline deliveries with guidance

· Work closely with and actively support supply chain, estimation, planning and other project teams

· Provide technical clarifications towards clients, sub suppliers, class and yard with guidance

· Support Technical Maintenance & Support team, Operation Managers and offshore units as and when required, including visiting Units in operation as needed for technical support and troubleshooting

Construction (Yard phase)

· Act as Operations focal point for leak testing activities

Ø Taking part in Commissioning activities

Ø Collation of comments and test pack review

Ø Review P&ID’s to gauge scope of testing and use engineering knowledge to question test boundaries

Ø Participate in the leak testing when commenced

· Take part in authoring, reviewing and commenting on Operational procedures

Ø Review and comment on new BWO operations documents from a process perspective

Ø Review and comment on client supplied subsea operating guides form a process perspective

· Start-up planning

Ø Preparation and review of start up plans

Ø Assist in closure of actions

· System line walking

Ø Process familiarisation

Ø P&ID line walking to ensure drawings are correct

Ø Line walk for final acceptance on commissioning handover

· Operations representative for some commissioning activities

Ø Attend on Operations behalf to witness commissioning and testing

Ø Be local in the ICSS testing to learn how the ICSS works

Ø Review control loops etc to gain knowledge of the different control systems

· Operations representative in meetings such as procedural HAZOP, ALARP workshops and planning meetings

Ø Attend as Operations representative and add input from engineering experience

Proactively support and cooperate with all disciplines to achieve optimal results.

Operations:

· Assist the relevant unit in all matters relevant to Process and Safety

· Liaison with the Asset Maintenance team and actively contribute with technical and advisory support to Offshore Management Team, Asset Manager and Technical and Maintenance Managers in terms of Process Systems

· Review and assist in providing the engineering solutions for Technical Query and Management of Change Request from the Facility

· Preparation of process deliverables in support of work pack preparation including; PFDs, P&IDs, Equipment and Instrument Datasheets, etc.

· Perform and check process design calculations and process simulations

· Provide input to Asset Planning on modification scopes; engineering, fabrication and implementation phases.

· Support studies including HAZOP, HAZID, Risk Assessments as required.

· Provide input for variation orders, including cost estimates and justification.

· Actively contribute to Process discipline activities and provide input to develop and maintain company engineering standards and best practices within the field

· Continuously make suggestions for improvements in all spheres of influence

Responsibilities

• Resolve day-to-day business application operational issues & requests within SLA
• Ensure day-to-day activities, projects / change requests are done in compliance with REC IT Control Policies & Procedures
• Liaise with key users and Business Process Owners (BPO) to identify pain points and problem areas that require IT solution. Then capture specific requirements, propose cost effective solution, coordinate activities and implement
• Prepare and maintain up to date business process flows, configuration documents, technical / functional specifications, test scenarios / case creation, conduct user acceptance testing & roll-out solutions
• Establish rapport with end users from different departments, other IT members, and vendors to meet targets & KPIs

Requirements

• Min Degree in Computer Science, Information Systems or Business related with minimum 3 years of relevant experience
• Well-developed understanding and working experience on SAP (or any other ERP) modules such as PPE (Production Planning & Execution), MM (Materials Management), WM (Warehouse Management), SD (Sales & Distribution), and TM (Transportation Management)
• Experience in SAP IBP (Integrated Business Planning) is preferred but not required, or experience in any other planning tool for Supply Chain Planning such as Microsoft Dynamics 365, Netsuite, IBM, etc. will also be considered
• Must be able to do basic configurations in SAP or whichever applicable ERP / planning tool
• Integration experience with other legacy or 3rd party systems

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description & Requirements

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

Job Description

• Industry/ Organization Type: Construction/ Building Management System
• Position Title: Project Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days, Mon to Fri (9am to 6pm)

Key Responsibilities

• To plan projects, establish project criteria, coordinate project reviews, and ensure the proper implementation of project elements.
• Interacting daily with clients to interpret their needs and requirements and representing them in the field
• Perform overall quality control of the work (budget, schedule, personnel’s performance) and report regularly on project status
• Assign responsibilities and mentor the project team.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support
• Work effectively as part of a team with minimal supervision.

Job Requirements

• Diploma/Degree in Mechanical Engineering or any related field
• Proven working experience as a Project Engineer
• Excellent knowledge of design and visualizations software such as AutoCAD
• Advanced MS Office skills
• Familiarity with rules, regulations, best practices and performance standards
• Ability to work with multiple discipline projects
• Project management and supervision skills
• Decision-making ability and leadership skills
• Must have relevant work experience in engineering or a related field

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

Research Engineer position in the Department of Chemical and Bimolecular Engineering at National University of Singapore (NUS). The aim of this position is to develop in-depth understanding of the electrochemical CO2 reduction, and to design new and cost-effective electrocatalysts and reactors to achieve efficient CO2 conversion to liquid fuels conversion. Extensive state-of-the-art infrastructures for materials synthesis and physical characterizations are established at the Department.

The research engineer is required to help in guiding students, visiting scholars, and assisting the establishment of larger research applications and facilitating initiatives with respect to sharing and developing infrastructure for electrocatalysis research within NUS.

Job Requirements

• Possess at least a Master degree (or other equivalent degrees) in chemical engineering, chemistry, materials science or other relevant related field.
• Experience with electrocatalysis, or similar chemistries, is considered advantageous. Experience with material characterization techniques like SEM/EDS, TEM, STEM, XRD, XAS, XPS, FTIR, and Raman will also be highly considered.
• Since cross disciplinary work is essential for the success of this project, it is considered positive if the candidate can demonstrate experience in similar work environment.
• Good written and spoken communication.
• Open to fixed term contract.

Responsibilities

• Drive customer issue resolution activities following the claims management process, i.e. root cause analysis, containment, corrective action, and factory process / quality controls improvements to prevent recurrence of problems and efficacies of detection
• Work with regional Technical Product Managers to resolve field claims. This includes performing failure analysis and field visits to customer sites/installation
• Providing timely engineering insights including failure analysis technical reports and presentation
• Analyze product warranty claim and provide modeling on product service life
• Collaborate with cross functional teams, contributing to the domain of product FA or characterization
• Handles customer visits and factory audits and product inspection

Requirements

• Min Bachelor / Masters / Phd Degree in Engineering or Science (Electrical, Mechanical, Physical Sciences)
• Application experience in managing (large) data modelling would be favorable
• Problem-solving, failure analysis and trouble-shooting, statistical data analysis and design of experiment
• Ability to interface and communicate effectively with cross-functional teams as well as external stake holders and external auditors
• Communicate effectively through presentation and technical reports

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

COMPANY DESCRIPTION

Mediacorp is Singapores largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

To conduct maintenance activities so as to ensure high level of operability and reliability of M&E systems in Mediacorp Campus in support of all business functions.

Scope

• Coordination and integration aspects of electrical and mechanical systems, operations, and maintenance for critical and non-critical electrical & mechanical systems alike.
• Attend and resolve daily operational matters with regard to M&E systems and liaise with Estate Management for areas that required interface.
• To perform standby duties outside office hours to support servicing work and continuity of services at major events and / or live transmission of critical programmes
• Able to interpret single line diagram, control schematic and perform trouble shooting and hands on for minor repair.
• Knowledge on Green Mark BCA-IDA Green Mark DC/QMS/ISMS/BCMS/PCIDSS/OSPAR
• Stay contactable 24 x 7 for prompt attention to critical abnormalities

Responsibilites

• Ensure all monitoring system in good operating condition (error free) and feedback on all alarms and errors generated form BMS.
• Perform scheduling of services to facilitate events and arising requirement
• Reporting and compilation of daily, feedback, faults and activities.
• Operate the plant at the most efficient operating condition and ensure all abnormities are reported for corrective actions
• Validate all maintenance work carried out by the contractors and ensure compliance to the prescribed standards
• Perform routine facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, ACMV outages.
• Analyse data and identify trends with facility issues to determine root cause and take appropriate action.
• Responds to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects M&E operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 activities to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Maintain compliance with local workplace safety & health (WSH) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP) and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participates in the maintenance of all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Participates in cross functional coordination

• Higher Nitec / Diploma / Degree in Electrical Engineering or equivalent
• Minimum 3 years experience
• Respect, Teamwork and Drive
• Hands on Troubleshooting
• Stay contactable 24 x 7

Job description:

• Responsible to develop and review electrical design plans, specifications, and construction documents for the project.
• Provide technical guidance and oversight to the electrical design team, ensuring that electrical systems are designed and installed according to project standards and codes.
• Collaborate with architects, structural engineers, and other stakeholders to ensure that electrical systems are integrated correctly into the building design.
• Review shop drawings, submittals, and RFIs related to electrical systems and equipment and provide timely feedback to the design team.
• Conduct site visits and inspections to ensure that electrical systems are installed correctly and according to the design plans and specifications.
• Manage the commissioning and start-up of electrical systems and equipment, including testing and troubleshooting.
• Provide technical support to the construction team, including addressing technical issues, resolving conflicts, and managing change orders related to electrical systems.
• Review engineering designs and calculations to ensure compliance with all relevant codes, standards, and regulations.

Job requirement:

• Bachelor's degree in electrical engineering or a related field is required.
• At least 8 years of experience in electrical engineering, with a focus on construction projects.
• In-depth knowledge of electrical systems, including power distribution, lighting, fire alarm, and other related system.
• Strong technical skills, including proficiency in computer-aided design (CAD) software and other relevant tools.
• Excellent communication, organizational, and problem-solving skills.
• Ability to work collaboratively with diverse teams and stakeholders.
• Knowledge of industry codes and standards related to electrical systems.
• Sound knowledge of key Health and Safety issues and legislation.