1. Production Planning & Coordination

Oversee production schedules to ensure that manufacturing deadlines are met and products are delivered on time.

Coordinate with different departments (procurement, R&D, logistics, etc.) to ensure smooth flow of materials, resources, and information.

Monitor production capacity and adjust staffing and resource allocation as needed to meet demand fluctuations.

Develop production plans in alignment with company sales forecasts and customer orders.

2. Quality Control & Assurance

Ensure that all manufactured products meet industry standards and regulatory requirements (e.g., FDA, GMP, ISO, etc.).

Establish and monitor quality control procedures to prevent defects and maintain product consistency.

Audit production processes regularly to ensure compliance with internal quality policies and external regulations.

Address and resolve any quality issues in collaboration with the quality control team.

Coordinate with research and development teams to ensure new formulations are scalable and comply with safety and quality standards.

3. Team Management & Leadership

Manage and lead the production team, including supervisors, operators, and technicians, to ensure high productivity and morale.

Set performance expectations and conduct regular performance evaluations for the production staff.

Implement training programs to ensure all employees are up-to-date with safety standards, operating procedures, and company policies.

Foster a culture of continuous improvement and employee engagement.

4. Health & Safety Compliance

Ensure the factory complies with occupational health and safety regulations (OSHA or local standards).

Conduct regular safety inspections and address any potential hazards in the production environment.

Ensure workers are equipped with the appropriate PPE (Personal Protective Equipment) and are trained in proper safety protocols.

Respond promptly to any accidents, incidents, or safety violations.

5. Inventory & Materials Management

Ensure that sufficient raw materials, packaging, and other production supplies are available for the manufacturing process.

Work closely with the inventory and procurement teams to manage stock levels, avoid shortages, and reduce waste.

Oversee the storage and handling of raw materials and finished goods in accordance with safety and regulatory standards.

6. Process Optimization & Efficiency Improvement

Analyze and identify opportunities to optimize production processes, reduce waste, and improve efficiency.

Lead initiatives for cost reduction and production optimization without compromising quality.

Utilize lean manufacturing principles, such as 5S, Kaizen, or Six Sigma, to streamline operations.

7. Maintenance & Equipment Management

Ensure all production machinery and equipment are properly maintained and functioning at optimal levels.

Collaborate with the maintenance team to schedule regular inspections and preventive maintenance.

Address any machine breakdowns or operational issues promptly to minimize downtime.

8. Regulatory Compliance & Documentation

Ensure compliance with local, national, and international regulatory standards related to manufacturing supplements (e.g., FDA guidelines for dietary supplements, GMP certification, etc.).

Maintain and review production records, batch logs, and other documentation for regulatory inspections and audits.

Oversee the labeling of products to ensure compliance with health claims and ingredient disclosures.

9. Reporting & Data Analysis

Prepare daily, weekly, and monthly production reports detailing output, quality metrics, and key performance indicators (KPIs).

Analyze production data to identify trends, inefficiencies, and opportunities for improvement.

Provide regular updates to senior management on production performance, challenges, and achievements.

10. Budgeting & Cost Control

Develop and manage the production budget, ensuring the factory operates within financial constraints.

Monitor production costs (labor, materials, equipment) and identify areas where cost savings can be made without compromising quality.

Prepare financial and cost analysis reports to assist in decision-making.

11. Collaboration with Other Departments

Collaborate with research and development to ensure that new products are manufacturable and scalable.

Work with the sales and marketing teams to meet customer demand and adjust production schedules based on sales forecasts.

Ensure seamless communication with logistics for product delivery and distribution.

12. Customer and Supplier Relations

Address any customer complaints related to product quality, packaging, or delivery timelines in collaboration with the customer service department.

Maintain relationships with key suppliers to ensure the availability of high-quality raw materials at competitive prices.

1. Prepare and schedule project programme and work flow at site.

2. Coordination with Client, Consultants, Authorities and Sub-contractors.

3. Submission of various documents and application to Consultants and Authorities such as Method Statement, Work schedule, application of various permit that are needed before start of the work.

3. Able to interpret drawings and provide assistance and support to Project Manager.

4. Work out proper scheduling to meet critical project deadlines.

Role Overview:

We are looking for a dedicated Production Assistant to join our team, supporting the daily manufacturing processes and ensuring high standards of quality, efficiency, and cleanliness.

Key Responsibilities:

• Operate production machinery and equipment for tasks such as filling, printing, labeling, and packaging products, contributing to smooth daily operations.
• Perform quality checks on raw materials and finished products according to the company’s quality standards, ensuring all items meet required specifications.
• Accurately document all production activities and tasks, maintaining comprehensive and organized records.
• Consistently adhere to Good Manufacturing Practices (GMP) to maintain high product quality, aiming for zero non-conformance issues.
• Support and participate in continuous improvement initiatives to optimize equipment efficiency and production processes.
• Suggest improvements for production processes and take proactive measures to enhance productivity and reduce costs.
• Maintain a clean and organized workspace by performing regular housekeeping and adhering to 5S principles.
• Follow all company policies and standards, including those related to safety, GMP, quality, and workplace procedures.
• Ensure compliance with company guidelines on uniform, grooming, communication, and operational standards.

Requirements:

• Minimum secondary school education.
• Basic English communication skills.
• Ability to perform physical tasks in a production environment.
• Positive attitude with a willingness to learn and grow.
• Strong teamwork skills and collaborative spirit.
• Preferred: At least 1 year of experience in a manufacturing environment (On-the-job training available for those without experience).

Salary Range: $2900~$3800

JOB TITLE: PROJECT ENGINEER / CO-ORDINATOR

RESPONSIBILITIES:

· Co-ordinate with Other Project Engineers/Clients & Site Supervisors at projects’ sites, on progress of schedule and work done

· Supervise and Inspect jobs done (Quality & Quantity) at projects’ sites.

· Base on Site Supervisors’ requisition, Send materials list to Purchasing Team to arrange.

· Verify workers’ attendance record, write progress report and send them to Admin department via Whatsapp

· Facilitate and request if any additional resources are required

· Ad-hoc duties if any assigned by Project Manager

*TRAINING WILL BE PROVIDED WHERE REQUIRED

Requirements

· O Level, Diploma/ITE, Degree in Mechanical Engineering, Electrical Engineering, Civil or other related studies

· Fresh, or any experience as a Project Engineer or co-ordinator related to Air-conditioning (ACMV Piping, Insulation works (Jacketing), and/or Electrical is added advantage, but not must

· Having Class 2 and/or 3 Driving License is a plus. Company will provide a vehicle /transportation

Please send your Resume to [email protected]

Or please Whatsapp at 98867100

Only shortlisted candidate will be called for the interview

Responsibilities:
• Conduct inspection, trouble shoot and complete maintenance of ship’s main engine remote control system and navigation equipment
• Familiar with ship owners and shipyards working procedures and environment
• Willing to work in local and overseas shipyard as well as anchorage environment at irregular hours which include overnight, weekends and public holiday depending on vessel schedule

Requirements:
• Relevant marine / mechanical / engineering qualification
• Sound knowledge in pneumatics / electrical control engineering
• ‘Hands on’ experience in Marine Automation

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Preparing project status reports by gathering, analyzing, and summarizing relevant information.
• Coordinating efforts for permit applications and ensuring all permits are obtained and kept up to date.
• Overseeing the ordering and delivery of materials, ensuring they arrive on time and are allocated correctly.
• Maintaining and updating project databases and records, including contracts, change orders, and project schedules.

Requirements:

• Relevant Diploma/Degree in Electrical Engineering from a recognised Polytechnic
• Proficient with Microsoft Office Suite, AutoCAD and project planning related software are required to prepare for proposal, reports and logs
• Possess knowledge in project management tools, solutions, and techniques highly desirable
• Possess safety awareness at all times

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Summary

• Location: Joo Koon, site
• Great Career Growth

Responsibilities

Project Engineer

• Manage projects at one or more designated sites.
• Assist the project manager with executing projects.
• Coordinate with consultants, architects, and relevant authorities.
• Liaise with clients, subcontractors, suppliers, and consultants about project issues.
• Plan and coordinate all fire installation tasks.
• Participate in meetings to discuss site coordination and project progress.
• Make sure projects stay on schedule.
• Oversee site activities and ensure implementation of plans.
• Check shop drawings, prepare as-built drawings, hydraulic calculations, and variation orders.
• Track project schedule, material deliveries, and budget.

Maintenance Engineer

• Assist in planning and updating maintenance schedules, permit clearances, and site schedules.
• Discuss contract and material costs with clients and vendors.
• Use ERP software to order materials and tools for maintenance.
• Join meetings with clients and vendors as needed.
• Make sure maintenance schedules are followed on time.
• Ensure safety measures are included in method statements.
• Prepare and follow up on quotations.

Requirements

• Minimum Diploma in Engineering (Mechanical) or equivalent.
• Candidate with working experience in related field will have added advantage.
• Able to start in short notice period.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Jasmine Wong (R22107578)

Responsibilities :

• Promote and propose company chiller & equipment to building consultants and contractors
• Responsible for developing long term customer relationships
• Building close business relationship with customers especially key accounts
• Maximizing account penetration and customer retention
• Identify potential opportunities & develop solutions with existing & new customers
• Update forecast timely into the system
• Negotiates value, addresses resistance, and close the sales.
• Differentiates & made company as preferred supplier
• You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Degree in Mechanical/ Electrical engineering or its equivalent
• 1-2 years in Engineering sales, experience in HVAC industry will be a plus
• Customer driven with excellent communication & interpersonal skills
• Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Develop green marine solutions that reduces marine carbon footprint, in line with company business objectives.
• Hands on in setting up of test lab to enable development and testing.
• Perform PLC software and algorithm development for electrical propulsion solutions.
• Generate documentation of software architecture and logic flow, test procedures, quality control and any other necessary supporting documents.
• Participate and support commissioning of vessels with similar configurations.
• Troubleshoot and resolve any issues related to our delivered solutions that may arise during the vessel commissioning.
• Any other tasks as may be required by supervisor.

Requirements:

• Min engineering degree in relevant discipline
• Strong software development skills particularly in equipment controls
• Strong analytical and troubleshooting skills
• Hands on person
• Team player
• Good communicator and has no problem engaging with external parties
• Knowledge in power electronics, motor drives, marine propulsion systems is a plus

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Responsibilities:

• Conduct tooling Contract review, mold design review, mold trial review, project review meetings
• Liaise with Designers, manufacturing Engineers, Planners on the progress of tool fabrication to achieve 100% on-time delivery
• Provide timely updates and Gantt charts to BD group
• Attend mold testing and perform molding process optimization to achieve part consistency quality
• Study FA report for dimensional rectification according product form fit functions as required by the customer
• Lead team in problem solving – identification of problems and analysis of the root cause
• Liaise with suppliers for mold outsourching on all tooling related issues
• Provide BD with technical support and customers with tooling feasibilities; Prepare quotation for engineering change requests

Requirements:

• Diploma / NITEC in Precision Machining, Tooling Technology or relevant
• Experience in project management and tooling technical incline
• Good analytical, communication and interpersonal relation skills
• Able to evaluate, diagnose and troubleshoot problems
• A team player with ability to work under minimum supervision

Qualified or interested candidates, please submit your updated resume in MS format by using the Apply Now Button or email to shinleng.liew(at)cvistahr.com

Candidates are also encouraged to contact our office where our approachable Consultants will address any inquiries and advice you with relation to this job advertisement. Our dedicated HR Consultants will get in touch with shortlisted candidates for a confidential discussion

R23119309 | EA License 16C7883

Job Description:
As a Service Engineer, you will be responsible for ensuring that our equipment is efficiently maintained, installed, and serviced. This role requires close collaboration with our clients, offering technical support and hands-on troubleshooting to meet their requirements.

Key Responsibilities:

• Provide support, installation, commissioning, troubleshooting, repairing and preventive maintenance for equipment.
• Communicate with suppliers, peers, and customers (business units and manufacturing sites) to accurately relay technical information.
• Response to customers’ requests by troubleshooting problems and take corrective actions within targeted timeline.
• Provide technical training and support to client staff as necessary.
• Maintain accurate service records and documentation for all client visits.
• Managing spare parts inventory.
• Practices good health and safe workplace.

Requirements:

• Degree in any engineering studies.
• Min 1 or 2 Years of relevant experience
• Exp in Semiconductor Industry / handling Semiconductor equipment will be added advantages
• Assembly exp will be added advantages
• Strong troubleshooting and problem-solving skills.
• Ability to work independently and communicate effectively with clients.
• Bilingual (Chinese & English) to liaise with Chinese speaking associate.

Interested candidate please click “QUICK APPLY” or forward a copy of your resume to [email protected]

HR in-charge: KC Cheah

Responsibilities

• Plan production schedule and delivery to meet customer orders and buffer stock requirements.
• Generate and review forecasting data and historical trends to determine material buying plans and production builds.
• Formulate, execute, and control production plans based on forecasts and sales history.
• Collaborate with the team to monitor, track, and address material shortages to prevent production disruptions.
• Review daily material shortages and expedite orders to minimize production delays.
• Manage and control production plans to ensure optimal inventory levels for meeting customer demand and lead times.
• Liaise with R&D, Engineering, and QA teams to ensure efficient manufacturability, standardization, and quality.
• Check BOM details and upload BOMs via ERP system as needed.
• Review EOL, rejected, and scrapped materials and highlight any issues.
• Review material requirements and stock status via the system to ensure data accuracy.
• Ensure accurate and timely month-end closing of orders (MO, PO).
• Prepare and submit reports as required (e.g., MO, OTD).
• Perform other tasks/duties as assigned by the supervisor.

Work Experience & Skill Job Requirements:

• Degree in Business, Engineering, or Supply Chain preferred.
• At least 3 years of relevant experience in supply chain or production planning, preferably in semiconductor/manufacturing industries.
• Strong Microsoft Excel skills for data analysis and reporting.
• Familiarity with ERP systems.
• Experience handling and managing suppliers.
• Team player with good interpersonal skills.
• Initiative and independence.
• Result-oriented, organized, meticulous, and with good problem-solving skills.
• Willingness to work additional hours when required.
• Proactive and positive mindset.

As an Ops & SRE Engineer, you are responsible for serving the technology community by caring deeply about their needs, frustrations, and overall satisfaction with their Cloud experience. You are passionate about improving the public cloud experience by constantly learning, engaging our customers with a strong desire to help our customers and enhance the cloud platform experience.

Partner with development teams to help reproduce and resolve public cloud platform issues.
Taking ownership of incidents reported and coordinating with L3 and engineering teams for resolution
Constantly learn and use cutting edge cloud technologies
Leverage your extensive customer support experience to provide feedback to the cloud team on how to improve the public cloud platform service.
Drive customer communication during critical events.
Write tutorials, and other technical articles for the developer community.
Responsible for solving customer’s cases with advanced troubleshooting techniques to provide tailored solutions for our customers and thoughtfully work with customers to dive deep into the root cause of an issue.
Apart from working on a broad spectrum of technical issues, the SRE may coach/mentor new hires, develop & present training, partner with development teams on complex issues or, participate in new hiring, write tools/script to help the team, or work with leadership on process improvement and strategic initiatives.
Responding to and investigating system generated security incidents
The role is an SRE role and thus includes rotation in a 24/7 on call roster that supports the cloud delivery platform pipeline

Key Skills and Experience

-1-2+ years Production Operations and SRE experience in supporting enterprise public cloud environments (AWS and Google Cloud)
-Knowledge on CICD tools (Bitbucket, Jenkins, AWS CLI etc.)
-Must have a helping hand attitude
-Knowledge on Incident Management, Change management process
-Highly proficient in written and spoken business English
-Well organized, adaptable and makes clear and effective decisions
-Knowledge and experience with observability and SRE tooling and philosophy:
-General knowledge of infrastructure components Firewalls, TCP/IP, DNS, ICMP, Networking, -Switching, PKI, TLS, Load Balancing
-General knowledge of web technology fundamentals HTTP, WebSocket, Content Distribution, WAF, REST, JSON, YAML, HTTP, CORS
-Strong experience with any flavour of Linux
-General knowledge and experience with Python, JavaScript/Java
-General knowledge of enterprise security and public cloud security
-Awareness of continuous delivery and continuous integration development environment git,
-General experience with at least one of the following: K8S, Ansible, Terraform, CloudFormation
-AWS Certified (SysOps, DevOps, Security) is a plus and good to have

* Provide storage/SAN administration and security management experience in various storage technologies, inclusive of direct attached storage, Storage Area Network, and archival storage

* Supervise backups, optimisation, initiation of recovery procedures and routine troubleshooting

* Respond promptly to incident, investigate & provide temporary &/or permanent resolution of incidents escalated. Provide timely status updates to relevant parties.

* Provide Backup administration and manage end to end backup infrastructure including backup job policies including Backup to disk and backup to tape

* Provide supporting documentation, reports and other information to management (e.g. backup and capacity reports)

* Experience and knowledge in supporting SAN environment and storage space management

* Performing upgrades and applying patches or firmware updates

* Experience and knowledge with installing and implementing VMware ESXi server, VMware vCenter, setting up vMotion, HA, DRS, and related VMware products such as VM vRealize Operation Manager (vROps), Update manager and other products for virtualization would be advantages.

* Experience with SAN, ServiceNow, Commvault, Veritas Backup Exec, WSUS

Job Responsibilities

• Design, deploy, and maintain cloud-based infrastructure using AWS or Google Cloud.

• Ensure compliance with asset management regulations in relevant countries.

• Monitor and optimize cloud resources for performance, cost, and security.

• Collaborate with cross-functional teams to develop and implement cloud solutions.

• Troubleshoot and resolve cloud-related issues promptly.

• Develop and maintain documentation for cloud infrastructure and processes.

• Stay updated with the latest cloud technologies and best practices.

• Managing cloud environments in accordance with company policies and security guidelines.

• Developing, deploying and debugging IaC code (Cloud formation and Terraform).

• Interacting with users, providing cloud support, and making recommendations based on user needs.

• Employing exceptional problem-solving skills, with the ability to see and solve issues before they snowball into problems.

• Educating teams on the implementation of new cloud technologies and initiatives.

• Regularly reviewing existing systems and making recommendations for improvements.

Job Requirements

• Bachelor’s degree in Computer Science, Information Technology, or a related field.

• 3-7 years of experience in cloud engineering, with a focus on AWS or Google Cloud.

• Experience in the financial services industry.

• Strong understanding of cloud security, networking, and cost management.

• Knowledge of DevOps practices and tools.

• Familiarity with asset management regulations in countries where UOB Asset Management operates.

• Experience with infrastructure as code (IaC) tools such as Terraform or CloudFormation.

• Proficiency in scripting languages like Python, Bash, or PowerShell.

• Excellent problem-solving skills and attention to detail.

• Strong communication and collaboration skills.

• Relevant cloud certifications (e.g., AWS Certified Solutions Architect, Google Cloud Professional Cloud Architect).

GEOTECHNICAL ENGINEER

Responsibilities :

· Civil & Structural Engineering Design and Geotechnical Works

· Liaison with Clients, Architects, fellow Consultants and Government Authorities on Project Execution.

· Writing Engineering Report

Requirements:

· Minimum 3 Years Working Experience in Civil & Structural Engineering Consultancy Office

· Good Knowledge of Steel and Reinforced Concrete Structural Analysis.

· Familiar with Euro Codes Steel and RC Structural Analysis and Design

· With High-Rise Building Design Experience

· Engineers with Geotechnical Design Experience will be an advantage

· Possess Good Communication Skills

· Experience in Managing Construction Projects eg. attending project meetings, liaison with Clients, Architect, fellow consultants and Government Authorities.

· Good Command of Written and Spoken English.

Overview

As a Design Engineer, you will assist the Technical Manager in all the designing, preparation, securing required legal documents for all the drawings (i.e.: shop drawings, structural drawings, architectural drawings and M&E drawings).

Responsibilities

1) Prepare and perform design for precast component according to client demand.

2) Responsible in the design and preparation of shop drawings and secure permits required by the government.

3) Review completed structural drawings, designs and specifications before issue for production.

4) Check and highlight all the discrepancies between Architectural, Structural and M&E drawings.

5) Co-ordinate with relevant parties on technical issues.

6) Plan & carry out production or service under controlled conditions – including product characteristics, work instructions / standard work methods, suitable equipment, Monitoring & Measurement (MM), release, delivery & post-delivery activities.

7) Ensure customer requirement are determined and met, thus enhance customer satisfaction.

8) Communicate to the organization the importance of meeting customer as well as statutory & regulatory requirement.

9) Establish the quality policy and objective.

10) Provide technical support for company operation.

11) Train, brief & supervise work and control process to work instructions / standard work methods and process plans.

12) Ensure planning & integrity of the Quality Management system (QMS).

13) Ensure Responsibility & Authority are defined & communicated.

14) Address customer satisfaction though the effective application of system, including processes for continual improvement and the prevention of non-conformity.

15) Conduct management review.

16) Ensure the availability of resources.

17) Determine, collect & analyze data for informed management decision.

18) Perform any other duties as assigned by the Management and the designated manager.

Requirements

1) Bachelor degree in Civil / Structural Engineering or equivalent.

2) Minimum 3 years of relevant work experience in precast concrete industry.

3) Experience in creating 3D models of building element.

4) Prosses excellent problem definition / analytical and problem solving skills.

5) Strong verbal and written communication skills as well as excellent customer relation skills.

6) Able to work independently.

7) A team player with the ability to multi-task, prioritize and organize tasks.

• Responsible for pre-contract and post-contract quantity surveying duties for MEP Works including preparation of cost estimates, procurement and tendering, tender evaluation, cashflow forecast, contract administration, variation, final account, etc.
• Manage the MEP Works taking off from drawings and pricing for cost estimates, tender documents, etc.
• Leading and coaching junior staff in delivery of services, including checking on the works done by junior staff
• Collaborate and develop good relationship with clients and stakeholders internally and externally
• Measuring and taking off quantities, liaising and negotiate with sub-contractors and suppliers
• Attend meetings and site inspections when required
• Comply with the Company’s QA requirements and best practice
• Establish client’s requirements and undertake feasibility studies
• Attend onsite and consultants’ meetings and liaise with clients, architects and associate consultants in the administration of projects
• Able to Source and Liaise with Site Personnel, Suppliers, Sub-contractors, Consultants and/or Architects for all project-related matters.
• Interpret engineering drawings and specifications to calculate project costs
• Prepare various contracts and nominated sub-contracts for tender and contract formalization
• Measure and take off quantities for architectural and structural work elements
• Administer pre and post contract and consultancy work
• Assess variation orders, prepare interim valuations, cost plans and budget studies
• Valuing completed work and arrange payments
• Provide advice on contractual claims

Knowledge/ Skills/ Abilities:

• Good verbal and written communication skills.
• Good working knowledge of contract/ commercial law.
• Good knowledge of construction products and materials.
• Ability to interact with various stakeholders, such as suppliers, vendors, contractors, clients, etc.
• Strong time management skills with exceptional attention to detail and ability to manage multiple tasks/ projects at one time.
• Strong organizational and interpersonal skills.
• Ability to understand and analyse construction costing information.
• Ability to maintain confidentiality, impartiality and discretion.

Job Requirements:

· Candidate must possess at least a Bachelor’s Degree/ Diploma in Electrical Quantity Surveying or its equivalent.

· 5 years and above experience as QS in Singapore.

· Proven ability in contract negotiation, contract administration & variation orders

· Competent in software skills MS Office and AutoCAD.

· Able to work independently, be meticulous, analytical with excellent problem-solving skills, proactive, a good team player & able to meet tight deadlines

· Able to start work immediately is an advantage

Job Summary:

The Security Systems Field Engineer must be able to program and install security systems (Card Access, CCTV, CATV and Intrusion systems)

Job Duties and Responsibilities:

1. Troubleshoots and diagnoses equipment problems in a senior service support role. That includes testing, troubleshooting of system components and functions and field verification of connections, labels, installation and work quality.
2. Understands advanced system drawings, specifications and technical manuals.
3. Manages the technical work in the field with little supervision
4. Works both “in house” and in the field when required.
5. Assumes ownership of project installation giving support to field staff and project manager. This includes providing advanced support for field installation staff.
6. Assists with maintaining and completing project punch-list for project close outs.
7. Handles other responsibilities as assigned.

Education, Certification, License, and Skill Requirements:

• Must have at least a ITE or diploma in Electronic/Computer Engineering
• Must have at least 1-3 years commercial Security Systems cabling experience (Card Access, CCTV, and Intrusion systems).
• Must be able to work well with other people
• Must be proficient with Microsoft Office (Word, Excel and MS Project).

Avensys is a reputed global IT professional services company headquartered in Singapore. Our service spectrum includes enterprise solution consulting, business intelligence, business process automation and managed services. Given our decade of success we have evolved to become one of the top trusted providers in Singapore and service a client base across banking and financial services, insurance, information technology, healthcare, retail and supply chain.

We are currently looking to hire a Cloud Engineer. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

JOB TYPE

Long Term Contract

ROLES AND RESPONSIBILITIES

• Support agency in new cloud related projects implementation.
  • Assist agency in reviewing access rights, and accounts control in cloud.
  • Review and resolve the vulnerabilities reported from scan and/or GCC alerts.
  • Provide consultancy to new projects to onboard AWS cloud services.
  • Review existing projects to streamline the services and maintain cost efficiency.
  • Strengthen the security posture of existing cloud infrastructure and propose enhancement.
  • Raise service request to BAU Operations Team for in-scope cloud related tasks.
  • To support and maintain AWS S3 Buckets and other AWS Storage services such as FSX.
  • To support Trend Micro CloudOne Workload and Endpoint Security / AMHIPS as part of Agency Anti-Virus/ Anti-Malware system.
  • To support and maintain ABLR Heavy Forwarder (CTS Services) as part of Agency Audit Logging requirement.
  • To support Agency GCC Infrastructure using DevOps process or tools such as Terraform or AWS CloudFormation.
  • To support Audit and security compliance activities.
  • Work with BAU team, System Engineers, Cloud Engineers, and DBA to support and maintain agency GCC environment.
  • To support and maintain Central Account Management (CAM) servers (CTS Services) as part of Agency Audit requirement.
  • To support Disaster Recovery exercises.

Scope of Work Details for support in AWS

1. Compute Services

1.1 Engineer shall perform any or all the following system administration tasks relating to compute services in the GCC environment, as may be required by the Customer:

(a) Deploy and manage virtual instances such as Amazon EC2

(b) Configure virtual instance perimeters such as the number of CPU/RAM, CPU and size of storage

(c) Deploy and manage virtual instances bootstrap script provided by the Customer

(d) Create virtual instance images such as Amazon Machine Image

(e) Manage and maintain Amazon Web Services (AWS) security group

Engineer shall perform other system administration tasks that are not specified but are related to compute services in the GCC environment.

2. Network Services

2.1 Engineer shall perform any or all the following system administration tasks relating to network services in the GCC environment, as may be required by the Customer:

(a) Create and manage virtual private cloud network such as AWS Virtual Private Cloud (VPC)

(b) Manage and maintain DNS records using cloud native tools such as AWS Route 53

(c) Manage and maintain load balancer such as AWS Network/Application Load Balancer (NLB/ALB)

(d) Deploy, manage and maintain content delivery network such as AWS Cloud Front

(e) Implement virtual private cloud peering, establishing private links with virtual private cloud endpoints, Elastic Network Interface (ENI), Elastic IP, Internet Gateway, IP block reservation, Security Group, Network Access Control List (NACL), Virtual Networks, web application firewall and enhanced networking.

3. Storage Services

3.1 Engineer shall perform any or all the following system administration tasks relating to storage services in the GCC environment, as may be required by the Customer:

(a) Create object storage buckets using cloud native tools such as Amazon S3

(b) Configure the object storage buckets such that they are secure and private

(c) Provision block storage disk for virtual server’s disk using cloud native tools such as Amazon Elastic Block Storage (EBS)

(d) Manage and maintain file storage quota and access permission using cloud native tools such as AWS Elastic File System (EFS)

(e) Setup life cycle management policy from object storage to archive storage using cloud native tools such as Amazon Glacier

(f) Perform object storage version control, security and encryption

(g) Manage and maintain object storage static website on server-less configuration.

3.2 The Contractor shall perform other system administration tasks that are not specified but are related to storage services in the GCC environment.

4. Security and Identity Services

4.1 Engineer shall perform any or all the following system administration tasks relating to security and identity services in the GCC environment, as may be required by the Customer:

(a) Setup Identity and Access Management (IAM) according to the requirements specified by the Customer, using tools such as AWS IAM

(b) Setup and manage encryption keys according to the requirements specified by the Customer, using tools such as AWS Key Management Service (KMS)

(c) Setup and manage threat detection systems according to the requirements specified by the Customer, using tools such as Amazon Guard Duty

(d) Setup web application firewall (WAF) according to the requirements specified by the Customer, using tools such as AWS WAF

(e) Setup native cloud compliance tools according to the requirements specified by the Customer, using tools such as AWS Config

4.2 Engineer shall perform other system administration tasks that are not specified but are related to security and identity services in the GCC environment.

5. Backup and Recovery Services

5.1 Engineer shall perform any or all the following system administration tasks relating to backup and recovery services in the GCC environment, as may be required by the Customer:

(a) Perform backup and recovery using cloud native tools such as AWS EBS snapshot, Azure Recovery Service Vault

(b) Create machine images for backup using cloud native tools such as Amazon Machine Image

5.2 The scope of backup and recovery services shall cover any or all the following components of the Customer’s system in the GCC environment, as may be specified by the Customer:

(a) Operating systems

(b) Applications

(c) Databases

(d) User and application data

(e) System configurations.

5.3 Engineer shall perform other system administration tasks that are not specified but are related to backup and recovery services in the GCC environment.

6. System Monitoring Services

6.1 Engineer shall perform any or all the following system administration tasks relating to system monitoring services in the GCC environment, as may be required by the Customer:

(a) Setup and configure cloud native monitoring according to the requirements specified by the Customer, using tools such as AWS CloudWatch

(b) Setup and configure cloud native application logging according to the requirements specified by the Customer, using tools such as AWS CloudWatch

(c) Setup and configure cloud native Cloud Service Provider (CSP) activity logging according to the requirements specified by the Customer, using tools such as AWS Cloudtrail

6.2 The scope of system monitoring services shall cover any or all the following aspects, as may be specified by the Customer:

(a) CPU utilisation

(b) Memory and swap space utilisation

(c) Memory page scanning rate

(d) Disk space utilisation

(e) Errors generated in the system logs

6.3 The Contractor shall perform other system administration tasks that are not specified but related to system monitoring services in the GCC environment

7. Patch Management

7.1 As part of providing TFM Services for the Customer’s system hosted in the GCC environment, Engineer shall perform the monthly patching and ad-hoc vulnerability scan and remediation

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression.

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Keerthana Ramakrishnan

Avensys Consulting Pte Ltd

EA License 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' privacy policy.

Liaise with Main Contractor & Consultant on project related matters

· Conduct site inspection, reviewed work-in-progress and ensure proper completion of projects

· Liaise with installation team to ensure work done is in accordance to drawing/specification

· Good to have 3-5years of working experience in Construction Industry, fresh grads are also welcome

· Able to read and understand construction drawings

· Able to work as a team and work with diverse people

· Good interpersonal skills

1. Diagnose, troubleshoot, and resolve software issues on installed Building Automation Systems.
2. Development of program and graphics design for upgrading works.
3. Diagnose and troubleshoot problems with control devices and instrumentation.
4. Perform Building Automation system maintenance on assigned sites.
5. Managing risk assessment, safe work procedures and SOP.
6. Create and maintain site documentations such as PM forms, risk assessment and any other documents needed for the site maintenance.
7. Prioritize and organize tasks and set in motion the sequence to achieve the desired objectives with the turn-around time required.
8. Conform to project site safety and housekeeping requirements.
9. Develop and enforce software standards and process.

REQUIREMENT

1. Minimum 3 years of professional work experience in Building Automation, HVAC and similar process and control systems.
2. Good understanding of maintenance environments, corrective, preventive and predictive maintenance procedures.
3. Experience in maintenance/troubleshooting of Building Maintenance System (BMS), Extra Low Voltage systems (ELV), DDC/PLC programming and SCADA design & operation.

QUALIFICATION

1. Diploma in Mechanical/ Electrical/Facilities Maintenance or any other relevant Engineering discipline from a reputable local or foreign institution.
2. Safety certifications (BCSS, W@A, bizSAFE etc.) will be an added advantage.

Position Summary

We are seeking a highly skilled and dedicated Level 3 Technical Support Specialist to join our team. The ideal candidate will have extensive experience in troubleshooting and maintaining complex IT infrastructures. This position requires expertise in a wide range of technologies, including Ubuntu & KVM, Windows Server 2019, MS SQL Server, Kubernetes, Containers (Production & Staging), Openstack, CEPH Storage, Huawei Server, Huawei Switches, Huawei Firewall, Nvidia CUDA & CUDA Libraries, Kubeflow, DOCKER, mellanox switch, Nvidia spectrum switches, and Nvidia A100 Server. The candidate must be adept at quickly identifying and resolving technical issues to ensure optimal system performance and user satisfaction.

Responsibilities

· Provide Level 3 technical support and troubleshooting for platforms including Ubuntu & KVM, Windows Server 2019, and MS SQL Server.

· Manage and maintain Kubernetes clusters and container environments in both production and staging settings. This includes scaling, monitoring, and securing containerized applications to ensure high availability and performance.

· Oversee the deployment, configuration, and maintenance of Openstack environments and CEPH Storage solutions to support scalable and resilient cloud infrastructure.

· Maintain and troubleshoot Huawei Servers, Switches, and Firewalls, ensuring secure and efficient network operations. Implement best practices for network security and performance optimization.

· Implement and optimize Nvidia CUDA & CUDA Libraries, Kubeflow, and DOCKER environments for high-performance computing tasks. This involves developing and tuning machine learning models and applications for maximum efficiency.

· Configure and manage advanced networking equipment, including mellanox and Nvidia spectrum switches, as well as Nvidia A100 Servers. Ensure seamless integration and operation within the broader IT infrastructure.

· Collaborate with cross-functional teams, including developers, network engineers, and system administrators, to identify and resolve complex technical issues. Provide mentorship and guidance to junior support staff.

· Conduct root cause analysis for recurring issues and implement long-term solutions. Document processes, procedures, and troubleshooting steps to enhance the knowledge base.

· Participate in on-call rotations to provide 24/7 support for critical systems. Ensure timely resolution of incidents and minimal downtime for business operations.

· Stay current with emerging technologies and industry trends. Continuously improve technical skills through training, certifications, and hands-on experience.

Qualifications

· Bachelor of Science in Computer Science or a related field.

· Minimum of 3 years of experience in technical support and troubleshooting, with a focus on enterprise-grade IT environments.

· Strong knowledge of operating systems (Ubuntu, Windows Server) and virtualization technologies (KVM, Docker).

· Experience with database management (MS SQL Server), including performance tuning, backup/restore operations, and disaster recovery planning.

· Proficiency in cloud platforms (Openstack, CEPH Storage) and their integration with on-premises infrastructure.

· Expertise in networking equipment (Huawei Servers, Switches, Firewalls; mellanox switches, Nvidia spectrum switches), including setup, configuration, and troubleshooting.

· Experience with high-performance computing (Nvidia CUDA & CUDA Libraries, Kubeflow, Nvidia A100 Servers), including the deployment and optimization of GPU-accelerated applications.

· Strong understanding of orchestration tools (Kubernetes) and their use in managing microservices architectures.

· Excellent problem-solving and communication skills, with the ability to convey complex technical concepts to non-technical stakeholders.

· Ability to work independently and as part of a team, managing multiple priorities and projects simultaneously.

Certifications (Preferred)

· Certified Kubernetes Administrator (CKA)

· Microsoft Certified: Azure Solutions Architect Expert

· Huawei Certified ICT Professional (HCIP)

· Docker Certified Associate (DCA)

Professional Affiliations

· Member of the Linux Foundation

· Member of the Cloud Native Computing Foundation (CNCF)

Job description:

• ⁠Lead the design, planning and implementation of solar PV projects.
• Liaison between different stakeholders and ensure needs of all stakeholders are met.
• Manage and coordinate project activities, including procurement, selection of vendors/contractors, delivery of equipment , installation, testing and commissioning.
• Provide hands-on support and guidance during on-site construction and installation activities, ensuring compliance with design specifications, safety protocols, and industry standards.
• Monitor project progress and equipment schedules, identify and resolve technical issues or challenges, and implement corrective actions as needed to ensure project success.
• Collaborate with internal teams, external stakeholders, and regulatory authorities to obtain necessary permits, approvals, and certifications for solar PV projects.
• ⁠Prepare and review project documentation, including technical drawings, specifications, schedules, progress reports, and as-built drawings.
• Conduct regular site inspections, quality assurance checks, and performance evaluations to ensure long-term reliability of installed solar PV systems.
• Foster a culture of safety, quality, and excellence in project execution.

Requirements:

• Bachelor’s degree or Diploma in Renewable/Clean Energy/Electrical/Mechanical Engineering. Candidates with relevant experience may be considered.
• Technical knowledge in PV or Electrical.
• Relevant working experience of 1 year and above.
• Dynamic and committed with a proactive working attitude.
• Based in Singapore, accept business trips to Indonesia and other SEA countries.
• Good interpersonal skills.

Evaluates, tests, installs, administers, and maintains optimal and effective Middleware components like JBOSS, Oracle WebLogic, IBM WebSphere, Apache Web server, MQ on UNIX and Linux operating environment both in On-Premise and Cloud environment.

Key Accountabilities

· Achievement of year-on-year productivity gain

· Achievement of on-time and on-budget of change request and new services

· Achievement of targets for time-line and budget & SLA contract terms for projects

Job Responsibilities & Duties

• As a Lead Systems Engineer, you will monitor and analyze systems performance data, and tune operating system to improve performance, optimize processing response time or to reflect required changes in the processing environment. You will also be the technical expert to provide technical resolution/support to internal / external customers.

• Monitors and analyses systems performance data, and tunes operating system to improve performance, optimizes processing response time or to reflect required changes in the processing environment

• Provide technical consultancy to customers on matters related to system performance, integration and configuration.

• Assist project Service Delivery Manager on managing the day-to-day Operations management.

• Subject Matter Expert (SME) level of hands-on knowledge in JBOSS, Weblogic, Apache

• Analyze system performance and makes recommendations for optimization.

• Ensure that the production environment is highly available per the needs of the business and established Service Level Agreements.

• Lead and establish Root Cause Analysis for all High Severity issues. Work with multiple teams for successful resolution of issues and incidents

• Review Incident Report.

• Participate in the upgrade/patching planning and execution of the Middleware software.

• Provide subject matter expertise (SME) for Issues, security related threats and vulnerabilities as it pertains to middleware.

• Participation in establish and test disaster recovery policies and procedures across all Middleware environments

• Ensure adherence to applicable Change and Release Management processes.

• Develop technical documentation and procedure on monitoring, performance.

• Regular projects reporting update to SDM & any other duties as and when assigned

• Lead problem determination on system errors or malfunctions and works with the application team/supplier to identify, diagnose and rectify the problem.

• Performs capacity study to analyze current resource utilization and estimates future requirements.

• Monitoring system to ensure high availability and optimal performance

• Update documentation of work.

• Supports internal and external audit exercises for the maintenance of various certifications and contractual requirements.

• Keeps abreast of technological advancement, emerging standards and new software or hardware solutions that may affect decisions on systems building or enhancements

• Strong communication and documentation skills

• Flexible and able to adapt to a rapidly changing environment

• Positive, self-motivated individual who can complete tasks independently

• Must be a team player

• Must be willing to travel and executing overseas project when is required.

• Must be able to work in 24 x 7 operations standby support environment

Minimum Qualification:

• Bachelor’s degree in Computer Science (or related area) preferred

• Oracle WebLogic, WebSphere, JBOSS certification is added advantage

Experience required:

• At least 8 years of working experience in end-to-end operations management and implementation experience which includes configuration, upgrade, and problem resolution of JBOSS, Weblogic, MQ, Apache in RedHat Linux, Unix)

• Minimum 5 years of hand-on experiences of middleware products such as Weblogic, JBOSS, Apache, Nginx, & MQ.

• Working experience in cloud environment (AWS, Azure) would be an advantage

• Red Hat Enterprise Linux & JBoss application server administration experience is required.

• Hands-on experience on RedHat & OS clustering administration, configuration, and troubleshooting

• Red Hat Enterprise Linux certification is good to have.

• AWS/Microsoft Azure cloud certification is desired

• Hands-on experience Kubernetes/Docker containers would be an advantage.

• Good understanding and support for springboot / microservices