Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

*Service Engineers*

Job Description

Responsibilities:

- Provide technical support to resolve technical inquiries from ships/vessels on Nordic Systems.

- Attend on-board service attendances and commissioning services, annual inspection and maintenance for vessels based on troubleshoot of the technical issues and feedback by chief engineer/vessel managers.

- Review service reports, customer technical specifications and provide support to sales team for bidding of spares.

- Troubleshoot issues involving electrical/electronic control systems, PLC products.

-Read and understand manuals, schematics, and P&ID's.

-Lead the preparation and coordination of ITRs based on approved electrical completion procedures.

-Prepare and update status of punch list and ensure all cleared punch items to be acknowledged by the client reps.

-Monitor and manipulate site execution in line with sequence of works.

-Handle technical issues, drawings, reports, procedures and any other relevant documents.

-Develop engineering capabilities and work with sales team on project proposal and bidding.

-Selection of equipment, materials for instrumentation and controls.

-Execution of projects.

-Plan and carry out E&I maintenances

-Manage Subcon and other adhoc activities, lead the team of technicians on site to execute the project.

Job Requirements

- Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Degree, Post Graduate Diploma, Professional Degree, Engineering (Electrical/Electronic) or equivalent.

- Prior experience in the Maritime/Oil & Gas industries and shipyards will be highly advantageous.

- Excellent verbal and written communication.

- Possess excellent interpersonal and communication skills.

- Responsible, Meticulous and able to work under pressure.

- Proficient with Microsoft Office Applications (Outlook, Word, Excel, Power Point, etc).

- Experienced in PLC/SCADA systems.

- Fluency in English (verbal and written) is essential.

Job Descriptions:

* Development & Implementation of Instrumentation & Control, Robotic, Building Automation, Industrial Automation, Process Control Application.

* Electrical Control Design

* Implementation of Process Automation, Instrumentation and Control, Testing and Commissioning, Technical Support, Customer Service, PLC Programming, SCADA / HMI programming, Computer and Server, Industrial Networking

* Responsible for design & development, implementation, onsite testing & commissioning, support, documentation and training

* Ad-hoc engineering support to customer when required.

* Willing to work on fast pace environment.

Job Requirements:

* Relevant graduate degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic)

* Min 1-2 yrs experience in good engineering practice, process automation, robotic, service and maintenance. Fresh graduates are welcome.

* Hands on experience in instrumentation implementation

* Knowledge of Building Automation & Process Control

* Experience in BMS / PLC / HMI process control / automation system, onsite commissioning

* Good technical skills in Allen-Bradley / Siemens PLC programming, SCADA

* Strong problem-solving and analytical skills

* Hardware configuration and software coding

* IT knowledge for Server/Client and Infrastructure

* Electrical control, instrumentations and control knowledge

* Customer orientated

* Analytical thinking

* Good communication skills for both written and spoken

* Ability to work well with others in a team environment, providing input and feedback in a helpful manner.

* Able to interact well with vendors.

* Strong team player with excellent interpersonal and communication skills, ability to work independently, Pro-active and able to work in a fast paced environment and handle multiple tasks when required.

Interested applicant please send resume with expected remuneration to [email protected]

We regret that only shortlisted candidates will be notified.

Quality Specialist

(12-month contract)

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Primary Responsibilities:

The incumbent will provide quality oversight on manufacturing site operations at the shop floor and co-ordinates with central quality functions as needed. The role will ensure and maintain high standards of quality and compliance within our organization.

In this role, you will be responsible for all or subset of the key responsibilities below:

• Act as a primary quality contact for assigned IPT & provide day-to-day quality support/guidance to IPT operations including quality decisions for manufacturing related events on the shopfloor.
• Represent quality at Integrated Process Team (IPT) tier meetings (example- Tier-2, Tier-4, Micro Tier), liaise with other quality functions for cascades or escalations to & from IPT Tiers.
• Review & assess events reported on the shopfloor, concur justifications to continue the operations or instruct to stop the operations while pending formal initial quality assessment.
• Participate shopfloor GEMBAs to ensure permanent inspection readiness of the site. Support audit & inspection resource room as assigned by the Manager.
• Act as a quality representative for assigned New Product Introduction (NPI) project & provide quality oversight on manufacturing of developmental batches, clinical manufacturing, process/packaging performance qualifications, equipment qualifications, certificate of analysis profile set-up, material creations, equipment & process change controls, and ensure pre-PAI readiness etc.
• Quality review & approval of documents related to development & qualification of process & cleaning, examples include but limited to - protocol & report for cleaning development cleaning validation, process development, process performance qualification, Initial Continued process verification (CPV), campaign length extensions, dirty/clean hold time changes etc.
• Quality oversight on new/revised electronic or paper documents to support routine production operations, examples include but not limited to –Production batch sheets, cleaning batch sheets, re-packaging protocols, Bill of Materials (BOM) memo, Engineering Record (ER) in IPI, Engineering Change Order (ECO) in SAP, Manufacturing Execution System (MES), non-routine Batch Sheet (BS), e-Log for Batch Sheet (BS) redline markups etc.
• Review & Approval of Statistical Process Control (SPC) limit report, Yield reports
• Perform quality review & approval of routine production/facilities related documents including but not limited to – Environment Management System (EMS) review for manufacturing, warehouse and labs, pest control review, preventive & correction maintenance (PM&CM) extension requests.
• Review non-routine/risk release of equipment/utilities/room, batch risk processing requests & support related material control actions.
• Support ad hoc requests for samples, joint inspections of rejected materials/damaged incoming goods, Time-Out-of-Cold-Storage (TOCS) adjustments in SAP, shelf-life extension requests etc.
• Perform any other tasks as assigned by Manager
• Provide quality oversight for the Aseptic Process Simulation (APS) and Aseptic Observer Program (AOP) such as quality monitoring, review and approval of APS protocol and report
• Review and approve performance qualification protocol, equipment & utilities re-qualification protocols or EM re-qualification protocols.
• Review/Approval of Re-packaging protocol for pre-execution
• Review and approve relevant Artwork.

Requirements:

• Diploma or bachelor’s degree in science/ Life Science, Pharmaceutical Science or Engineering or any other relevant field
• Minimum 5 years of applied professional work experience in quality control/assurance in pharmaceutical manufacturing environment.
• Competency in root cause analysis methods and tools.
• Experience in new product introduction or technology transfers.

Reg No: R22104540

EA License no: 94C3609

ABOUT SEMBCORP INDUSTRIES

Sembcorp Industries (Sembcorp) is a leading energy and urban solutions provider, led by its purpose to drive energy transition.

Headquartered in Singapore, Sembcorp delivers sustainable solutions to support energy transition and urban development by leveraging its sector expertise and global track record.

Sembcorp has a balanced energy portfolio of 21.2GW, with 14.4GW of gross renewable energy capacity across 10 countries*.

Its urban development projects span over 14,000 hectares across Asia and have generated over 377,000 employment opportunities and attracted close to US$50 billion of investment capital.

Sembcorp is listed on the main board of the Singapore Exchange. It is a constituent stock of FTSE Russell Index, MSCI Singapore Index, Straits Times Index as well as sustainability indices including FTSE4Good Index, iEdge SG ESG indices and several MSCI ESG indices.

For more information, please visit www.sembcorp.com.

PURPOSE AND SCOPE

• Responsible for the scheduled & corrective maintenance of instrumentation & control system and equipment

KEY ROLES AND RESPONSIBILITIES

• Performing scheduled maintenance (Preventive/Predictive Maintenance) programs and corrective maintenance (CM) of all the analyzer and instruments in the plant and prepare reports
• Preparation of MSRA for all maintenance works to be carried out
• Calibrating analyzer, instruments, components, CEMS and systems.
• Installing, configuring, calibrating and maintaining control, measurement and indicating instrumentation (pneumatic, analog & digital).
• Installing and terminating pneumatic and fluid connections.
• Inspecting and testing the operation of instruments and systems to diagnose faults
• Removing, repairing, adjusting and replacing components of control valve & actuators, positioner, transmitters and switches
• Maintaining backup and revision documentation for control systems and instrumentation.
• Coordination with 3rd party vendors for maintenance work and spare parts ordering
• Raising and closing permits in CMMS/ SAP system for maintenance work
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)

QUALIFICATIONS & EXPERIENCE

• Diploma in Instrumentation or equivalent Engineering discipline
• Minimum 10 years of experience in controls and instrumentation
• Knowledgeable and experience in PLC and DCS systems
• Experience working in the Incineration plant / process Power plant industry is an advantage

At Sembcorp, our shared corporate behaviours underpin all the work that we do in building a sustainable future:

• Institution-first Mindset – Put the interest of the Group ahead of individual interests.
• Collaboration – Deliver through collaborating across markets, businesses and functions.
• Accountability – Hold team and self accountable to deliver on our commitments.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description

• Managing IQC, IPQC, OQC, Quality Team and Laboratory Team
• Establish and report Process & Quality KPIs necessary to ensure performance.
• Contribute to defining and implementing the standards & tools for a comprehensive Quality Management program pertaining to Production.
• Contribute to defining and implementing the standards & tools for a comprehensive Quality Management program pertaining to Production.
• Implement and maintain Integrated Management System to meet the government regulations and company policy.
• Oversee and manage the quality complaint & feedback process for customers and ensure the flagged issues are resolved efficiently with effective communication and coordination with internal /external parties.
• Support business unit to seek for the continuous quality improvement opportunities through information / best practice sharing and training.
• Lead Analytical Laboratory and Quality Technicians in products analysis and testing to support the productions overall aspect and provide stable results of products Quality.
• Implementing, maintaining and continuous review the quality control and assurance systems of the plant, ensure compliance.
• Implementing and maintaining Company’s Integrated Management Systems, Manual and Procedures (ISO9001, ISO14001 & ISO45001，IATF16949), ensure the compliance and effectiveness of the IMS System;
• Assume any other suitable duties as and when assigned by the Company

Job Requirement

• Matured, meticulous, able to work independently with minimal supervision.
• Initiatives & positive working attitude.
• Quality system knowledge
• SAP
• Lean and Sigma knowledge
• Statistical tools & Data Analysis
• Problem Solving skills

HOW TO APPLY:

Interested applicants, kindly send your resume in MS WORD format to leo.tang(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Tang For Farn (Leo)

EA Personnel Reg No: R24121981

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Details:

• Location: Near Pioneer MRT
• Monday to Saturday 5.5 days work per week
• Monday to Friday 8am to 5pm and Saturday 8am to 12.15pm
• Oil and gas / Precision Engineering - Manufacturing

Job Description:

• Reject or return raw materials, component parts which failed to meet specifications or not properly labelled
• Red flag procedural non-compliance and quality issue to higher management
• Update and maintain records of quality check conducted
• Ensure Receiving, First Article, In-process and Final outgoing inspection conformed to quality aspect of engineering drawings
• Parts quality inspection must meet production schedules and time lines for delivery
• Measure product dimensions and ensure all quality aspects of the job met specifications as in engineering drawings
• Generates quality inspection reports per customer requirement
• Ensure parts identifications are properly labelled upon received, during production and completeness for delivery
• Maintain active calibration validity and integrity of all inspection equipment and gages

Job Requirements:

• GCE “N” or “O” level / NTC 2 or NTC 3 in Metal Work
• Minimum 1-year experience in quality control field
• Ability to use common measuring instruments like gauges, calipers, micrometers and profilometers
• Able to interpret technical drawings and engineering specification
• Good communication skill, basic computing skill and a team worker

Job Description & Requirements

Position Overview: The Quality Control Specialist for the central kitchen plays a pivotal role in ensuring the production of high-quality food products that meet established standards and exceed customer expectations. This position is responsible for monitoring and maintaining quality assurance processes, conducting inspections, and supporting continuous improvement efforts within the central kitchen.

Key Responsibilities:

1. Product Inspection: Conduct thorough inspections of all food products at various stages of production, from raw ingredients to finished dishes, to ensure they meet quality and safety standards.

2. Quality Assurance: Develop and implement quality control procedures and guidelines, ensuring compliance with industry regulations and company standards.

3. Sampling and Testing: Collect samples for laboratory analysis or sensory evaluations, such as taste tests, to identify any deviations from the set quality benchmarks.

4. Documentation: Maintain detailed records of inspections, test results, and other quality-related data. Generate reports and share findings with relevant departments.

5. Problem Identification: Identify and report any issues, defects, or deviations from quality standards. Collaborate with production teams to address and rectify issues promptly.

6. Process Improvement: Provide input and suggestions for process improvement, and participate in cross-functional teams to drive continuous improvement initiatives.

7. Training and Education: Conduct training sessions for kitchen staff on quality control procedures and best practices, ensuring all team members are aligned with quality standards.

8. Food Safety Compliance: Ensure adherence to food safety regulations and standards, including HACCP, by overseeing and validating sanitation and hygiene practices within the kitchen.

9. Supplier Collaboration: Collaborate with procurement and supplier teams to monitor the quality of incoming ingredients and packaging materials, and implement corrective actions when necessary.

10. Equipment Maintenance: Participate in the maintenance and calibration of quality control equipment and tools used in inspections and testing.

Qualifications and Requirements:

· Proven experience in food quality control or quality assurance, ideally in a central kitchen or food production setting.

· Strong understanding of food safety regulations, including HACCP principles.

· Excellent attention to detail and analytical skills.

· Effective communication and teamwork abilities.

· Proficiency in using quality control tools, such as laboratory equipment and data analysis software.

· Problem-solving skills and the ability to drive process improvement.

· Knowledge of food production processes and ingredient characteristics.

· Willingness to work in a dynamic, fast-paced environment.

·Able to work on PH ,Night shif and Weekend

The Quality Control Specialist for the central kitchen is an essential contributor to ensuring the safety and satisfaction of customers by maintaining consistently high-quality food products. This role demands a keen eye for detail, a commitment to compliance, and a dedication to continuous improvement in food production processes.

EA LICENSE : 18C9520

EA REG: R1765753

ESSENTIAL DUTIES & RESPONSIBILITIES:

• Lead all aspects of electrical controls, power and instrumentation systems related to the equipment and machinery.
• Be responsible for the design and technical support of all hardware, software, instrumentation and controls elements as part of an integrated system.
• Identify, create and support project documentation including, but not limited to HMI, PLC programing, power distribution, control/signal wiring, wireless technology, cabinet/panel design, BOM and layout drawings to corporate standards.
• Develop instrumentation specifications as related to process requirements and control schemes.
• Support engineering, project management and deployment groups to identify and resolve technical issues.
• Provide technical direction as required.
• Work with outside vendors and purchasing to select and establish equipment component specifications, material take-offs, requisitions and vendor orders while coordinating cost control, project schedule and manufacturing efforts.
• Have the ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.
• Must be able to work through problems from a technical and practical prospective, while maintaining cost controls.
• Have good organization and communication skills.
• Have the ability to work independently and in an interdisciplinary team environment to perform all duties in a professional and timely manner.
• Must be able to work through problems from a technical and practical prospective, while maintaining cost controls. Ø Prepare, check, and issue instrument schedule and list, including document index, instrument index, I/O list, cable schedule, interconnection wiring drawings, termination drawings, junction box schedule, instrument hookup drawings, and material take off.
• Check and issue block diagrams, control/rack room layout, cable route, instrument location plan, DCS, SIS, BMS systems loop drawings, instrument hook-up details, and instrument sizing and calculation.
• Prepare and issue instrument data sheets for control valves, on-off valves, PCVs, MOVs, PSVs, and other field instruments. Ø Guide designers to prepare drawings.
• Coordinate requirements with other disciplines.
• Work with Project Managers and other team members

Skills & Experiences required:

• Bachelor’s degree in engineering or related field with 10+ years of experience in system controls, instrumentation and wiring.
• Wastewater, Chemical Processing and/or Oil & Gas systems experience is preferred.
• Experience designing PLC & control panels, PLC and HMI programming is preferred.

Must possess in depth knowledge of Automation programmable controller hardware, automation software and AC Drives

Knowledge of Microsoft Office and AutoCad

• Qualification shall be Diploma in Civil and structural or ITI.
• Min. 10 years working experience for Steel Structural and 7 Years experience for Tekla (Ssteel)
• Software skills , must be proficient with AutoCAD ,Tekla (Xsteel), PDMS
• Strong Knowledge of Steelwork detailing works (welded/bolted).
• Preparation of Steel Structural engineering drawings for Structural Discipline by AutoCAD.
• Engineering drawings includes Steelwork General Arrangement, Connection Details and welding map drawing.
• Modeling the steelwork in 3D using the Tekla Software.
• Preparation of General Arrangement Drawings for the steel works which to be used in Fabrication Yard and Site.
• Preparation of Assembly drawings from Tekla for the steel works which to be used in Fabrication Yard.
• Preparation of Single Part drawings from Tekla for the steel works which to be used in Fabrication Yard.
• Preparation of Cutting List for the structural Bar Items.
• Preparation of Nesting Plan for the structural plate Items.
• Liaise with the Engineering Team for the input drawings.
• Co-ordinate with the fabricator and Shop drawing vendor.
• Review the shop drawing received from the sub-Vendor/
• Handling the technical queries from the fabrication Shop and Site if any.
• Review of Vendor Documents of various Static Equipment, Dynamic Equipment, Tank, Pump, Switch gear, control panels, HVAC Equipment, VFD and Process Packages, Boiler/Heater/Incinerator etc..
• Understand the Inter discipline (Piping, Mechanical, Electrical, Instrumentation, HVAC, F&G) co-ordination required for the project and performs the same within the targeted schedule.
• Programme on BASICS OF METAL CUTTING
• Advanced CAD/CAM

We are seeking a dedicated and organised Credit Control executive to support the Finance Manager. You will play a crucial role in supporting the credit management function, including liaision with customers and internal staff. If you are proactive with a positive attitude, we are inviting you to join our organisation.

Duties:

• Responsible for credit control activities, which would include the following:
• Manage and maintain debtor's accounts to ensure the accounts are current.
• Monitor Accounts Receivables closely and ensure timely update of receipts from clients into accounting system.
• Close liaison with customers to ensure the timely collection of payment.
• Support any duties with our billing team to ensure in compliance to accounting standards, government regulations, internal policies and credit control policies.
• Any other ad-hoc duties assigned.

Requirements:

• Past experience as a Credit Controller is favourable, preferably in a fast-paced business environment
• Exceptional organisational skills and attention to detail, with the ability to multitask effectively
• Ability to multi-task
• Strong problem-solving abilities and the capacity to work independently with minimal supervision
• Basic knowledge of accounting system experience
• Proficiency in using Microsoft Office Suite (Word & Excel)
• Professional demeanour and the ability to interact confidently
• Discretion and the ability to handle confidential and sensitive information with integrity
• Flexibility and adaptability to accommodate changing priorities and tasks

Location:

• We are located in the West, 3 minutes walk from Gul Circle MRT

You may also email us your resume to [email protected].

Will be assisting Material Engineer on all activities. Should have Basic Knowledge of Metals & Non-Metals, Alloys, Able to differentiate / grade / mechanical products with atleast Five yearsof Experience

Job Description

• Perform inspections on raw materials, intermediates and finished products by conduct sensory evaluation, carry out physical, analytical tests to ensure compliance with specifications and standards.
• Document non-conformance and conduct investigations on customers’ complaint samples or rejected items (Internal & External).
• Issue various documents (TDS, COA) and reply technical enquiry raised internally (e.g. inter-department, affiliates) or externally (e.g by customers).
• Ensure preventive maintenance and external calibration of lab equipment is carried out duly.
• Ensure proper functioning and running of QC laboratories (Chemical, sensory, microbiology, retain sample room) in accordance with ISO9001, 5S, lean principle, ISO14000 and OSHAS 18001 standards and procedures.
• Assist and support in the implementation of continuous improvements in QA/QC functions

Qualification

• Minimum Diploma or Degree in Chemistry, Food Science and Technology, Analytical Chemistry or equivalent in years of similar experience.
• Overall work experience of 1 to 3 years in a similar position.
• Basic knowledge & interpretation of gas chromatography, knowledge of densimeter and refractive index equipment preferred.
• Basic knowledge of chemistry.
• Basic Sensory evaluation capability / potential capability preferred.
• SAP knowledge will be an advantage

This role is responsible for the development of robotic manipulator and actuation applications. This includes conceptulization of end effectors, jigs and fixtures, pick and place sequencing, motion studies as well arm programming and execution including but not limited to

• Responsible for the development of robotic manipulator and actuation applications. This includes conceptulization of end effectors, jigs and fixtures, pick and place sequencing, motion studies as well arm programming and execution.
• Pick and place methods and logic
• Selection of sensors and actuators
• Integration of vision systems
• Tolerance and motion studies
• Working together with application team to design new applications
• Arm simulation for new applications and deployments
• Arm simulation for new applications and deployments
• Training of assistant engineers on arm programming and setup

Requirements:

• Degree in Electrical/Electronics/Mechanical Engineering
• Working knowledge and experience with Yaskawa / Motoman manipulators and the INFORM language
• Excellent knowledge on TM arm programming, setup, commissioning and debugging
• Expereince on applications which require frame shifting and moving frames, integrating and calibrating vision systems to manipulator systems, end of Arm Tooling design, calibration and maintenance

• Permanent position, Salary up to $10,000 with AWS + VB
• Working location: Jurong East MRT
• Business travel requirement: ~35% to Asia regions

Responsibilities

• Influencing and persuading senior site and sales heads to ensure compliance with site quality systems to the appropriate standards, thereby mitigating risks associated with non-compliance and poor quality.
• Maintain coordination with Group Quality to ensure a unified global approach to quality matters and provide consistent supporting documentation across different regions.
• Ensure quality performance by monitoring appropriate leading and lagging indicators on customer complaints, contributing to the best customer service while remaining competitive.
• Encounter complex problems involving a variety of important and relevant information, requiring recognition and resolution.
• Make frequent business decisions independently that impact different manufacturing sites and the overall business.
• Provide training and coaching to Sales and Sites on quality and customer-related needs

Requirements:

• Degree in Chemistry
• Minimum 10 years of experience in Quality.
• Preferably comes with consumer care background and proven experience overseeing the regions (Asia).
• In-depth understanding of the company’s products and market trends.
• Thorough knowledge of QA systems, GMPs, and regulatory requirements.
• Familiarity with guidelines such as ICH, FDA, EMA, MHRA.

Interested candidates please send your CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

Triton AI Pte Ltd

Registration Number: R1875181

EA: 21C0661

Reports To: Quality Assurance Manager

Primary Objective:

To perform Validation activity on supporting evidence/ information supplied on client records to enable the processing of the outcome payments by the finance team. Utilize pre-determined checklists and either approve claims as compliant submissions or reject back to operations with succinct detail of remedial action requirements to progress to claim. Overall responsibility for the accuracy and timely processing of submitted outcome events within the required performance deadlines. Conduct client records checks in line with pre - determined working papers and support the production of reports outlining current program health weighting and clear remedial action requirements or recommendations to changes/ implementation of controls. To act as first point of contact for the operational leads with regards to quality enquiries and support facilitation of internal and external audits.

Responsibilities:

• Perform validation activity on programme outcomes to determine if evidence supplied supports payment claim from our customer (government), issuing remedial action guidance, and monitoring corrective action completion when necessary.
• Audit client files to determine the level of compliance and overall programme health indicators and to produce initial audit findings report for presentation to the Quality Assurance Manager for cascade to the wider business.
• Robust working knowledge and interpretation of Government Minimum Standards to act as subject matter expert for issuing guidance and maintaining FAQ logs.
• Support in trend analysis and action plan creation to mitigate risk and suggest process improvement to enable compliant by design approach
• Report highlighted knowledge gaps in operational delivery areas that present a risk to the Quality Assurance Manager for review and action.
• Produce management reports linked to quality in line with business requirements and schedule.
• Support creation / amendment of quality guidance, manuals and other delivery resource tools for compliance in programme minimum standards and AKG set standards.
• To provide administrative support to the Quality Assurance Manager as and when required.

Person Specification

Key Skills/Experience

• Tertiary education with audit and compliance experience
• Proficient in the use of Microsoft packages and intermediate or Advance Excel (Essential)
• Experience in generating management reports for trend analysis and reporting purpose
• Experience dealing with government bodies will be preferred but not compulsory
• Strong project management skills and prioritize tasks
• Self-Motivated and able to work from own initiative with minimal supervision
• Strong eye for detail – able to identify anomalies
• Efficient working practices – speedy, accurate input
• Anticipates and identifies problems / weakness and propose solutions to improve the program
• Ability to provide guidance using varied channels including group delivery and live online delivery
• Demonstrates a willingness to help and support other members of staff within the team
• Flexible Attitude to work

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

• Location: International Business Park (IBP)
• Business travel requirement: ~35% to Asia regions
• Salary: $8,000 - $10,000 commensurate with experience

Role Overview

As a key member of the Group Quality Leadership team, the Regional Quality Manager supports manufacturing and non-manufacturing sites on quality matters across the Asia Pacific region.

Job Responsibilities

• Influence and persuade senior site and sales heads to ensure compliance with required quality standards and mitigate risks from non-compliance.
• Coordinate with Group Quality for a unified global quality approach and consistent documentation.
• Stay updated on new customer quality requirements, identify gaps in current practices, and help sites close these gaps through planning and best practices.
• Communicate complex quality information in a user-friendly way.
• Monitor quality performance using indicators and data analysis to improve customer service and competitiveness.
• Identify and solve complex quality problems, provide advice in critical situations, and handle product recalls.
• Make significant business decisions independently that impact multiple sites and overall business performance.
• Provide training and coaching on quality and customer-related needs.
• Represent the company on quality committees and regional trade associations.
• Support sales with quality discussions and meet with main or potential customers in the region.

Knowledge, Skills, and Abilities

• Degree in Chemistry
• Minimum 10 years of experience in Quality.
• Preferably comes with consumer care background and proven experience overseeing the regions (Asia).
• In-depth understanding of the company’s products and market trends.
• Thorough knowledge of QA systems, GMPs, and regulatory requirements.
• Familiarity with guidelines such as ICH, FDA, EMA, MHRA.
• Ability to plan multiple activities with competing priorities.
• Commercial insight to evaluate processes for commercial benefits.
• High level of interpersonal skills.

Interested candidates please apply online or send your latest CV to [email protected]

Kindly note that only shortlisted candidates will be notified.

Triton AI Pte Ltd

Registration Number: R23118389

EA: 21C0661

Responsibilities:

(1) Perform routine maintenance/inspection and testing of the below equipment's and systems:

• Fire shutter systems
• Pressurization fan
• Fire alarm bell
• Fire alarm system and CPU
• Smoke detector, Heat detectors
• Highly sensitive smoke detection system
• Sprinkler system, hose reel system, FM200 System, Inergent system, Pre-action sprinkler system, Dry riser system
• Sprinkler pump, jockey pump, hose reel pumps

(2) Troubleshooting the control panel

(3) Attend during system breakdown and Identifying the problem, conduct proper diagnostic procedure and troubleshoot the system

(4) Provide support during system upgradation and installation of new systems and equipment's

(5) Maintain all the records of the inspected systems/ equipment's and report incase of any abnormalities

(6) Must be a team worker who provide support and make sure the member of the team are working together effectively.

Requirements:

* Nitec in Electrical Engineering or it's equivalent

* Minimum 1 year related working experience

* Must be a team worker who provide support and make sure the members of the tean are working together

effectively.

Intersted candidates please send your latest resume to "[email protected]"

JOB SUMMARY

Carry out Quality Inspections, Prepare Quality Reports, Calibration of Monitoring and Measuring Equipment and ensuring Compliance to QHSE Policies and Procedures at all times.

RESPONSIBILITIES & DUTIES

• Ensure incoming and in-process inspections are carried out timely and quality inspection reports are filled up accordingly.
• Ensure timely communication about the defects detected during inspections to the Quality Engineer, QHSE Manager/ MR, Production Supervisor and Production Manager.
• Review quality inspection reports from external providers and perform verification of the results.
• Updating Quality Engineer and QHSE Manager/ MR on the inspection status and update in Navision.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Ensure that operations within his area of responsibilities are in accordance with the QHSE policy and objectives.
• Ensure that employees are aware of the impact of their activities on the environment.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

ACCOUNTABILITIES

• Ensure the QHSE requirements are effectively maintained and followed.
• Ensure responsiveness to inspection requests and technical support to the team.
• Ensure all plans are met.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.

QUALIFICATION & EXPERIENCE

• NTC / Nitec preferably in Quality or Mechanical Engineering discipline or equivalent.
• Preferably 1 years of relevant experience in a Quality Inspector role.
• NDT (MT and PT) Level 2 certificate
• Ability to use and read Monitoring and Measuring Equipment (Vernier, Micrometer, Gauges, CMM machine, etc)
• Interpret and read Engineering Drawings.
• Familiar with ISO and API requirements / standards is preferred.

Primary Responsibilities:

• Plan, design, review and prepare drawings, specifications and Tender Document.
• Authorities’ consultation and submission
• Manage technical, engineering and contractual matters.
• Resolve any technical difficulties & other issues that may arise.
• Design control systems, SCADA, DCS etc.
• Preparation of General Arrangement, control architecture and ICA equipment layout drawings.
• Preparation of Control Panels, LCS, instruments and analyser and cable etc specifications and datasheets.
• Prepare loop diagrams, hook up drawings, control schematics, cable schedule, bill of quantities etc.
• Design of CCTV system, fire alarm control system, Public Announcement System, security access systems etc.
• Review and evaluation of vendor submissions.
• Provide project cost estimates
• Coordination with other disciplines e.g. civil, structural, mechanical, building services and electrical designers.
• Attends meetings, discussions with clients, contractors and vendors.
• Provide engineering support for bids & proposals.
• Provide engineering support during construction
• Provide engineering support during commissioning
• Design management and project management of proposals and projects where the scope is primarily ICA.

Preferred Qualifications

• Degree in Electrical or Electronics Engineering or any equivalent qualification.
• Candidate shall have minimum of 10 years experience related experience, preferably with consultancy experience.
• Past experience working on water or wastewater projects will be an advantage (municipal and industrial).
• Able to work independently in producing the project deliverables to meet project timeline
• Proficient in written and oral communication with good interpersonal skills.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.