Job description:

• Responsible to develop and review electrical design plans, specifications, and construction documents for the project.
• Provide technical guidance and oversight to the electrical design team, ensuring that electrical systems are designed and installed according to project standards and codes.
• Collaborate with architects, structural engineers, and other stakeholders to ensure that electrical systems are integrated correctly into the building design.
• Review shop drawings, submittals, and RFIs related to electrical systems and equipment and provide timely feedback to the design team.
• Conduct site visits and inspections to ensure that electrical systems are installed correctly and according to the design plans and specifications.
• Manage the commissioning and start-up of electrical systems and equipment, including testing and troubleshooting.
• Provide technical support to the construction team, including addressing technical issues, resolving conflicts, and managing change orders related to electrical systems.
• Review engineering designs and calculations to ensure compliance with all relevant codes, standards, and regulations.
• Any other duties as assigned from time to time.

Job requirement:

• Bachelor's degree in electrical engineering or a related field is required.
• At least 8 years of experience in electrical engineering, with a focus on construction projects. Candidate with less experience will be considered for a junior role.
• In-depth knowledge of electrical systems, including power distribution, lighting, fire alarm, and other related system.
• Strong technical skills, including proficiency in computer-aided design (CAD) software and other relevant tools.
• Excellent communication, organizational, and problem-solving skills.
• Ability to work collaboratively with diverse teams and stakeholders.
• Knowledge of industry codes and standards related to electrical systems.
• Sound knowledge of key Health and Safety issues and legislation.

Job Description & Requirements:

• Establishes and maintains network performance.
• Builds net configurations and connections.
• Troubleshoots network problems.
• IP address auditing.
• Establishes networking environment by designing system configuration and directing system installation.
• Defines, documents, and enforces system standards.
• Maximizes performance by troubleshooting network problems and outages and scheduling upgrades.
• Configures router.
• Updates data servers and network equipment.
• Collaborates with network architects on network optimization.
• Secures network system by establishing and enforcing policies and defining and monitoring access.
• Updates job knowledge by participating in educational opportunities, reading professional publications, and participating in professional organizations.
• Accomplishes information systems and organization mission by completing related results as needed.

Job Description & Requirements

Job description

• Perform Design, Engineering, Project Management and Construction Management.
• Review project specifications and technical clarifications.
• Prepare method statements and check drawing discrepancies.
• Carry out project planning, design, material requisition, cost control, project supervision and documentation.
• Supervise the project work and coordinate with the client’s representatives, consultants, and subcontractors on technical matters.
• Coordinate with Architectural, Structural, Mechanical and Electrical staff members to resolve problems and issues.
• Assist in tender, progress claim, VO issuance and document control etc.
• Coordinate and support the design team to effectively deliver design deliverables which have been reviewed for procurement and build-ability.
• Carry out works scheduling, materials requisition and cost control responsibilities and liaise with clients, consultants, subcontractors and other relevant governmental authorities to ensure full compliance.
• Identify requirements for project, installation and commissioning personnel required for the delivery team and manage those resources assigned.
• Implement the processes and procedures for the control of subcontracts, installation, commissioning and take-over to meet the minimum requirements of the project.
• Responsible for quality aspects of works, site operation safety and material/plants utilization.

Job requirement

• Diploma or Degree in Mechanical or Electrical Engineering or any related discipline.
• Possess good interpersonal and communication skills.
• Proficient in MS Office suite, AutoCAD and related industrial software applications.
• Good analytical and problem-solving skills

The Job

• Develop timing/power/noise characterization flow for advanced node memory compiler.
• Strong focus on design automation for SRAM compiler, big data analysis and design verification.
• Develop memory analysis flow for PPA check.

The Talent

• Bachelor's Degree (with min. 6 years of relevant industry experience) /Masters Degree (with min. 4 years of relevant industry experience)/ PhD in Electrical and Electronic Engineering/Computer Engineering/Computer Science.
• Knowledge of SRAM/ROM memory functionality and high speed, low power memory design architecture.
• Experience in spice simulation and understand CMOS layout view, Verilog coding is preferable.
• Proficient in script programming with Perl or Python3.

Job Responsibilities:-

• Utilize in-depth knowledge of Foundation IP to evaluate and qualify IP’s. Able to benchmark and optimize Std cells/IO’s/memory for optimum performance, area or power needs of a project
• Conduct Spice simulations to verify the performance and reliability of designs on RC extracted netlists
• Perform library characterization to ensure accurate timing, power, and area models. Stay up-to-date with industry trends and emerging technologies in library characterization and PPA analysis
• Help to develop and maintain EDA automation scripts to streamline CAD flow and design processes
• Modify and optimize IPQA scripts to improve efficiency and performance
• Analyze and understand both hard and soft IPs within SOC designs. Work with IP vendors to deliver custom specs needed for MXL project needs
• Review silicon reports and provide detailed analysis to identify and resolve issues
• Work closely with vendors and cross-functional teams to ensure successful project outcomes. Collaborate with design teams to ensure seamless integration of libraries and IP blocks
• Maintain comprehensive documentation of IP Vendor engagement. Troubleshoot and resolve issues related to IP, EDA tools and automation flows

Job Requirements:-

• Bachelor’s or Master’s Degree in Electrical Engineering, Computer Engineering, or a related field
• Minimum 10 years of experience in design engineering or a related field. Good understanding of the IC design flow, including front-end and back-end processes
• Proficiency in Foundation IP, Spice Simulation, Library Characterization, EDA automation scripts, and IP script modifications. Familiarity with library characterization tools such as Liberate, Cadence Genus, or Synopsys Library Compiler
• Strong ability to review and analyze silicon reports and provide detailed insights. Excellent analytical and problem-solving skills
• Excellent interpersonal and communication skills for effective collaboration with vendors and team members
• Experience with advanced node technologies (e.g., 8nm, 4nm, and below)
• Experience with SOC IP design and verification
• Knowledge of emerging technologies such as FinFET, FD-SOI, or III-V semiconductors
• Familiarity with industry-standard EDA tools and methodologies
• Experience with tools such as Synopsys PrimeTime, Cadence Genus, or Mentor Graphics Questa

Location: Next to Bendemeer MRT

Interested candidates may submit detailed CV with the following info:-

• Current salary, including AWS or Variable Bonus
• Expected salary
• Availability

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

Requirements:

1) A degree in Civil Engineering from a university or its equivalent that is recognized by the Professional Engineer Board, Singapore.

2) Minimum 6 years of design experience in Building projects and/or Earth Retaining Structures within a consulting environment.

3) Strong engineering analysis and design skills and knowledge.

4) Competent in common engineering design software and analytical tools.

5) Proficient or have experience in programming skills will be an advantage.

6) Conversant with relevant regulations and authority submissions and capable of leading the entire authority submission process.

7) Competent in precast concrete, post-tensioned concrete and steel works design.

8) Familiarity with MET and PPVC will be an added advantage.

9) Conversant with local codes and knowledge of the design codes in the region.

10) Capable of working independently, carrying out design, performing peer review or value engineering on structural solutions

11) Capable of leading the C&S design in a project.

12) Good planning, organizational, writing and communication skills.

Job Description :

1) Lead and perform Civil/Structural engineering analysis and design.

2) Perform hands-on design, provide technical input and ensure work quality is maintained at the expected standard in a project.

3) Participate in BIM coordination with the assistant of the BIM team.

4) Prepare technical specifications and manage projects.

5) Conduct feasibility study, engineering assessment and prepare technical report.

6) Carry out site inspections and technical reviews, when necessary.

7) Design management and participation in the successful delivery of projects.

8) Attend meetings, reporting and design matters.

9) Liaise with fellow Engineers and/or Consultant team.

If you are interested in joining us, please send your CV with the following information to [email protected] or reply to the post.

1) CV including relevant experiences and nationality

2) Current and Expected salary

Job description:

• Design Engineer for embedded memory design and verification in advanced nodes for high performance ASIC targeting Cloud AI/ Data Center Network Switch and 5G infrastructure, CPU and AP-SOC
• Collaborate closely with product and architecture teams to define, design and develop high performance customized semiconductor memories to meet PPA specifications and integration.
• Innovate, design, and incorporate special circuits and methodology to achieve best-in-class PPA for custom and compiler memories.
• Develop timing/power/noise characterization flow for advanced node memory compiler. Strong focus on design automation for SRAM compiler, big data analysis and design verification
• Develop memory analysis flow for PPA check

Job requirements:

• 3+ years of hands on experience in design of embedded memories (SRAM, TCAM) for high performance processors or ASICs in advanced nodes (3nm/5nm)
• Good understanding of Digital Circuit design techniques in FinFet technologies.
• Exposure to complete design cycle of SRAM memory and compiler development
• Supervise layout engineers and review layout for optimality.
• Experience in using industry standard schematic entry tools, advanced transistor level simulators (XA, HSIM, FINESIM)
• Experience with LEC tools (ESPCV)
• Knowledge of RTL and place and route tools is a plus
• Ability to come up with design verification and test plans
• Silicon debug and bring up experience is a plus
• Working knowledge of scripting in Perl/Python
• Willingness to collaborate closely with cross functional teams across the globe

Qualifications:

• Bachelor’s degree in computer science, Information Technology, or related field.
• Has minimum of 4 years' experience working with Linux and architecture.

Proven experience in:

• Building and managing both Windows and Linux servers in cloud environments.
• Strong scripting and automation skills (e.g., Python, Bash and PowerShell).
• Excellent problem-solving and troubleshooting skills.
• Strong communication and collaboration skills.

Preferred Qualifications:

• Minimum 2 years of experience with cloud providers (AWS or Google Cloud Platform).
• Must have Linux/Unix system administration experience (e.g. system troubleshooting, install software, modify operating system and application configuration).
• Require networking knowledge for troubleshooting network routing and firewall issues.
• Configure Agency’s existing Log Management System(s) to forward logs to GCSOC
• Set up LMS(s) at Agency (if they don’t have), either on physical server or virtual machine
• Must have Linux/Unix system administration experience (e.g. system troubleshooting, install software, modify operating system and application configuration). at least 4 yrs.
• With Windows and Cloud background (1-2 yrs)
• Require networking knowledge for troubleshooting network routing and firewall issues.

Please share your updated CV to [email protected]

As a Network Security Engineer, you will provide Level 1/2 centralized technical support (Network & Cyber).

Job Description:

•⁠ ⁠Participate in maintenance standby duty to cover 24x7 support on rotational basis as pre-assigned by the team lead.

•⁠ ⁠Ensure SLA Level is achieved for every fault case.

•⁠ ⁠Ensure escalation is carried out when a fault call is beyond the knowledge of L1.

•⁠ ⁠Attend to daily call assignments when not in standby during office hours.

•⁠ ⁠Perform weekend or after office hours duty though not on standby if required.

•⁠ ⁠Attend to preventive maintenance not limited to hardware inventory.

•⁠ ⁠Follow up on cases from opening till closure.

•⁠ ⁠Update incident tickets properly and promptly.

•⁠ ⁠Obtain certifications required to support key customers.

•⁠ ⁠New assignments by Ops manager or TSM when needed.

Job Requirement:-

•⁠ ⁠Diploma / Degree in Computer Science / Computer Engineering / Information Technology related field, or IT equivalent.

•⁠ ⁠Preferably 2 or more years of IT working experience.

•⁠ ⁠Basic Cisco and Alcatel switches/routers/wireless knowledge.

•⁠ ⁠Basic network troubleshooting skills on layer 2 and layer 3.

•⁠ ⁠Basic Network Security Knowledge.

•⁠ ⁠Basic Server Administration Knowledge.

•⁠ ⁠Certification in CCNA or any other network certifications will be a value-add.

•⁠ ⁠Possess initiative and disposition with a strong commitment and orientation towards results and high-quality standards.

•⁠ ⁠Strong problem-solving skills and ability to think outside the box.

•⁠ ⁠Team player with strong communication and interpersonal skills.

•⁠ ⁠Self-motivator with a positive attitude and high energy.

About the Role

This is a 12-month contract role.

Crux Topsides Process Engineer supports Crux Lead Process engineer in:

- Provide process engineering support during construction, commissioning, and startup

- Resolve design issues during execution phase when any arrises

- Perform P&ID line walk and support the development of As-Built draw

- Assist to resolve multi-discipline engineering issues related to design and execution phases

- Perform Unisim dynamic simulation runs to support startup and operating procedures development

Job Requirements

- The position requires a candidate with ~ 5 years Process Engineering experience in offshore, upstream/midstream operational assets and / or project delivery

- Holds at a minimum a bachelor’s degree in Process/Chemical engineering.

- Excellent written and verbal communication skills in English.

- Excellent collaboration and team working skills

- Demonstrate visible HSSE leadership and champion Goal Zero

Skills & Competencies Required

- Knowledge of design & operational aspects of upstream / midstream gas & condensate processing facilities

- Knowledge of Formal Safety Assessments a.o. HAZOP/HAZID/SIL assessment.

- Knowledge of PEFS, Process Safeguarding Flow Scheme (PSFS), Process Safeguarding Memorandum and Startup, Operating and Shutdown philosophy

- Provide Process engineering support on main process and vendor package design

- Provide support to developing operating procedures and manuals

What will you be doing?

Your responsibilities will include:

• Analyze the Authority’s data needs and document the requirements.
• Refine data collection/consumption by migrating data collection to more efficient channels.
• Plan, design and implement data engineering jobs and reporting solutions to meet the analytical needs.
• Develop test plan and scripts for system testing, support user acceptance testing.
• Work with the Authority’s technical teams to ensure smooth deployment and adoption of new solution.
• Ensure the smooth operations and service level of IT solutions.
• Support production issues - Track record in implementing systems with high availability, high performance, high security.

OK, I’m interested… is this the job for me?

We look for people who value agility, passion and teamwork; those who can bring fresh ideas to the table and want the opportunity to learn, grow, and expand their careers. Bring your aptitude and build upon what you do best for our customers, partners, team, and you.

Other qualities that you’ll need to be a fit for this role include:

• Good understanding and completion of projects using waterfall/Agile methodology.
• Good understanding of analytics and data warehouse implementations.
• Ability to troubleshoot complex issues ranging from system resource to application stack traces.
• Strong SQL, data modelling and data analysis skills are a must.
• Hands-on experience in big data engineering jobs using Python, PySpark, Linux, and ETL tools like Informatica.
• Track record in implementing systems using Hive, Impala and Cloudera Data Platform will be preferred.
• Hands-on experience in DevOps deployment and data virtualization tools like Denodo will be preferred.
• Understanding/ Hands on experience of reporting or visualization tool like SAP BO and Tableau will be beneficial but not required.
• Passion for automation, standardization, and best practices.
• Good written and verbal communication and interpersonal skills, ability to understand the business requirement, communicate confidently with stakeholders.

Regional Pre-sales Engineer, Samsung Air-Cond

Samsung Asia Pte Ltd

The Pre-sales Engineer reports to the Part Leader of Sales Engineering.

Main goals of the position

The main goal of the Pre-sales Engineer is dual. On the one hand to support, strengthen and professionalise the Pre-sales in Southeast Asia & Oceania, and on the other hand to enhance the business development in general and specifically of our VRF solutions (DVM).

The Position

• Support the regional teams in their operational activities; i.e. gathering specifications for the projects in pre-sales, accompany the business development team in visiting prospects, etc.
• Prepare project designs with our VRF-DVM Selection software;
• Follow up of the figures and targets per country (project pipeline, success ratio).
• Improve and enhance the results of the pre-sales activities;
• Focus on close collaboration with the local pre-sales and business development teams in the different countries;
• Enhance the builders/contractors network in the different Asian countries;
• Develop new business ideas and models to support the company’s growth.
• Improve contacts with the internal and external relevant stakeholders;
• Operational Excellence and KPI management;
• Organization of sharing knowledge conferences internally and externally.

The Profile

• A minimum of a master’s degree in Engineering preferably or an equivalent in working experience;
• Minimum of 5 years’ experience in an international commercial development role within a technical/mechanical building engineering environment (network) with preferably HVAC knowledge;
• Someone with a passion for engineering and is used to consultative selling, knows what is important and is technical achievable to create an ideal situation for the customer;
• Someone who is used to work within complex matrix and international environments;
• Has a network in the mechanical building branch and their clients in Asia;
• Someone who has knowledge of the building/installation/HVAC market, is used to look ahead;
• Who takes responsibility for his actions and knows how to enthuse his colleagues in the different countries;
• An organized, effective and positive person who has proven experience in working independently and within multicultural teams;
• Excellent communication skills are a necessity for this position. The position is a supporting role and communication must be effective towards the teams in the different countries and also towards the international HQ in Korea;
• As a person he/she must be empathetic, persuasive, a real go-getter, confident, creative and a strong representative of the pre-sales and business development team within the internal organization and also towards the external contact persons;
• An excellent knowledge (speaking and writing) of the English language is mandatory and preferably any additional Asian language;
• Frequently travelling within Southeast Asia & Oceania (30%).

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 3 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 3 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

As part of IME’s Photonics & Sensors Department, the candidate will take lead of the development of various testing capability for advanced photonics, including but not limited to chip-level and wafer-level testing of optical devices and electro-optical devices at high RF frequencies, as well as the testing of electro-optical sub-modules and sub-systems. You will work closely with an excellent multidisciplinary team working on advanced photonics.

Responsibilities:

• Develop various photonics testing capabilities for both chips and wafers, including design and building of measurement setups
• Perform chip-scale and wafer-scale data collection for OE, EO and OO devices from frequency range of 0 to 110 GHz
• Optimize data acquisition and analysis process to improve test efficiency, e.g. automation of measurement processes for wafer-scale testing and corner analysis
• Manage photonics laboratory including facilities, health and safety, equipment calibration, inventory and stocktake
• Take the lead to procure laboratory equipment and consumables
• Prepare technical presentations and papers for internal meetings, as well as conferences and journals
• Collaborate with project team to ensure quality and on-time delivery for various projects
• Performs other duties as assigned.

Qualifications:

• Bachelor’s or master’s degree in Physics, Electronic/Electrical Engineering, Photonics, Opto-electronics or equivalent
• More than 5 years hands-on experience in active photonics/optoelectronic device testing, especially for high-speed optical modulator and photodetector devices and electronic-photonic integrated circuit.
• More than 5 years hands-on experiences in optical setup construction and semiconductor & optoelectronic device characterization
• Experienced on experimental data acquisition and analysis
• Skillsets in programming or instrument automation is a plus
• Strong skills in problem-solving, communication and providing technical presentations
• Industry experience and awareness is a plus

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

ROLE DESCRIPTION SUMMARY

The Senior Network Engineer is responsible for the provision of network integration activities for the respective project and/or bid activity. The Engineer is a key member of the Hardware Deployment & Integration team that provides:

• Technical and resource supervisory input to Network Integration and Deployment engineering activities

• Skilled input to the Network Integration and Deployment activities within the respective project engineering segment, and

• Assistance to the Integration Group for bid response activities.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Network Engineer, you are accountable for:

For Projects:

· Revise solution architecture drawings and diagrams, cost templates (devis), the List of Supply (LOS) / Bill of Materials (BOM), and interfaces at the start of the project.

· Create and/or update network integration engineer contributions to the Solution Specification and Design documentation, Network Acceptance Test Procedures, and other associated network integration documents.

· Define equipment configuration for the ATM solution(s) and coordinate with Hardware Deployment and Integration management for assembly of the ATM system and interface with Tools Engineering, Customer Service and Site Services departments where necessary to accomplish this task.

· Load, configure, validate, and hand over equipment to Software Integration in the factory and on customer sites.

· Support configuration changes to system platforms in factory and customer sites.

· Attend Design Reviews with customers.

· Provide customer training.

· Identify risks at solution architecture level and propose where possible alternate validated solutions.

· Provide system and networking expertise useful in the design.

· Follow and contribute to the development and enhancement of engineering processes

· For Bids / Tenders:

· Creation and Peer Review system architecture diagrams.

· Creation of the List of Supply (LOS) / Bill of Materials (BOM)

· Creation of Hardware Integration section in the Engineering Department devis.

· Definition of system interfaces.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

Relevant bachelor’s degree or Master Degree

Technical skills

§ Must-have

ü Cisco formal certifications (CCNP, CCNA etc)

ü Good level of knowledge of, and experience with Unix/Linux (Redhat distribution preferred) Operating System

ü Familiarity with a wide range of Computer and Networking hardware (preferably Cisco)

ü Scripting (TCL/TK, Perl, & Shell)

ü Able to work on multiple activities con-currently and effectively self-manage (autonomy)

§ Nice-to-have

ü Work experience in a mission-critical, near real-time environment preferably ATC-related

ü Experience in large and distributed networked computer systems

Interpersonal skills

ü Sense of ownership

ü Team player

ü Verbal and non-verbal communication,

ü Listening skills,

ü Problem solving,

ü Decision-making,

ü assertiveness,

ü patience,

ü empathy

Project Client Management:

• Excellent execution of project towards company objectives and client satisfaction.
• Good understanding of job nature
• Monitor progress of project and update project status to Superior & Finance Department
• Being efficient & manage project efficientcy

Technical Competencies:

• Good understanding of local code requirements
• Good engineering knowledges in relation to company services offered (eg.M&E professional services, Green Mark Related work etc.)

REQUIREMENTS :

• Candidate must possess at least Diploma/Bachelor's Degree in Engineering (Electrical/Electronic), Engineering (Mechanical) or equivalent.
• Required language(s): English
• At least 2 Year(s) of working experience in an M&E Consulting firm.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD/BIM software is an added advantage.
• Able to work as a team, assertive , independent and proactive.
• Candidate without relevant working experience but with good interpersonal skills will be considered.

Interested candidates please submit updated resume via "APPLY NOW".

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

About the Role:

Responsible for Refinery/Chemicals/Petrochemicals/Oil&Gas Industries in the Field of Instrumentation & Control System design of greenfield/revamp/retrofit/Brownfield for Pre-FEED, FEED and Detail Engineering phase of Portfolio, Small, Medium & Large projects.

Technical/Functional Responsibilities:

• Prepare & issue Instrument Basis of Design, Project Specification for DCS, SIS, FGS, MMS and PLC systems and Instrumentation required for Packaged Equipment’s
• Prepare, Review and approve Instrument data sheets such as Control valve, On-Off Valves, Safety Relief Valves & other field instruments etc. Verify the calculations for the orifice plate bore, Control Valve Cv, and PSV’s, etc.
• Prepare, Review & approve Cause & Effect diagram and Logic diagrams. Review and approve all the vendor documents for DCS, SIS, FGS, MMS, PLC systems, Instruments and also for Mechanical Packaged equipment’s.
• Prepare and issue Material / Technical Requisition for all instruments, carry out Technical Bid Evaluation and Vendor Documents Review & approval.
• Review and approve instrument Index, DCS/SIS/FGS/MMS/PLC I/O Lists.
• Cable schedule, Interconnection wiring drawings, Termination drawings, Junction box schedule, Instrument Hook-up drawings, Material Take off.
• Prepare & issue Specification for Instrument cables, Junction boxes, Instrument Installation scope. Review and approve Block diagrams, Control / Rack room layout, Cable route, instrument location plan, Loop drawings.
• Review of P&ID’s, Isometric drawings and 3-D modelling.
• Work Experience in both Green Field & Brown Field Projects
• Ensure to adherence of Quality Management System, establish and follow Worley QA plans.

Qualifications - Internal

• Bachelor or Master Engineering degree in Instrumentation Engineering / Technology
• 20-25 years design experience in Petrochemical/Chemical/Oil & Gas industry
• Familiar with both International and Local Codes & Standards
• Knowledge of SPI, AVEVA Instrumentation, SP3D, E3D Databases are essential
• Should have handled at least two Mega / large projects as a Lead Instrumentation Engineer.
• Working knowledge on various Client Standards includes Shell DEP, Chevron Standards etc.
• Field Instrumentation and experience in Control Systems with strong leadership skills & teamwork is a requisite.
• Pro-active, able to communicate direct, open and flexible.
• Working experience with Global Integrated Delivery (GID) / High Value Engineering Center (HVEC) is a must

Project Client Management:

• Excellent execution of project towards company objectives and client satisfaction
• Good understanding of job nature
• Monitor progress of project and update project status to Superior & Finance Department
• Being efficient & manage project efficiently
• To assist engineers in day-to-day issues

Technical Competencies:

• Good understanding of local code requirements
• Good engineering knowledges in relation to company services offered(eg. M&E professional services, Green Mark Related work etc.)
• Help to review the works of the engineers assigned to you, with the objective of compliance to local authority requirements coupled with sound engineering principals

REQUIREMENTS :

• Degree in Electrical or Mechanical Engineering or equivalent.
• Minimum 5 years of working experience in M&E consulting firm.
• Strong building M&E knowledge with hands-on experiences.
• Knowledge in design and building project and relevant code of practice.
• Proficiency in AutoCAD / BIM software is an added advantage.
• Provide guidance to junior engineers.
• Able to work as a team, assertive, independant and proactive.

Interested candidates please submit updated resume via “APPLY NOW”.

Please include your availability date and expected salary in your resume.

We regret only shortlisted candidates will be notified.

Rapsodo Inc. is a sports technology and analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping golfers of all abilities, including PGA professionals, to optimize their launch conditions, to allowing MLB pitchers to increase the efficiency on their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1,000 NCAA athletic departments.

We are seeking a highly skilled and experienced Radar System Engineer to lead the design, development, and validation of advanced radar systems. This role is critical in shaping our radar solutions by architecting cutting-edge systems, developing robust signal processing algorithms, and ensuring seamless integration with RF front-end components. You will play a pivotal role in optimizing system performance, conducting real-world testing, and collaborating with cross-functional teams to drive innovation in radar technologies.

Key Responsibilities:

• Architect and design radar systems, ensuring performance meets technical and operational requirements.
• Develop and validate signal processing algorithms and radar architectures.
• Architect and validate RF front-end systems, ensuring seamless integration with radar systems.
• Conduct testing, debugging, and validation of radar solutions in real-world environments.
• Collaborate with cross-functional teams on system integration, performance optimization, and troubleshooting.
• Perform circuit design and modifications to improve overall radar performance.

Skills & Qualifications

• Master’s degree in Electrical Engineering, RF Engineering, or a related field.
• Strong experience in radar system design, and signal processing.
• Proficiency with radar architecture, including system testing and validation.
• Solid understanding of circuit design principles.
• Ability to work independently and collaborate in cross-functional and diverse teams.
• Strong problem-solving skills and attention to detail.

Preferred Experience:

• Familiarity with industry-standard RF design tools and testing equipment.
• Experience in radar system performance evaluation and optimization.
• Knowledge of various radar technologies and applications.
• Having hands on RF design and validation experience in 24, 60 or 77 GHz is preferred.

If you are excited about the prospect of contributing to a dynamic, innovative, and driven environment while also being able to work independently, we invite you to submit your application.

• Co-ordinates with consultants, sub-contractor, clients and other on all M&E matters, ensuring compliance in requirements, specifications and ensure project is on schedule
• Maintaining and developing good working relationships with internal and external customers
• Attend Coordinating Meeting
• Arrangement of work accordingly to work programs
• To Manage & Monitor subcontractors works and progress and feedback to Project Manager
• To supervise & coordinator M&E work on site
• Degree/Diploma in Electrical/ Mechanical/Building Services
• Local experience in construction industry is preferrable
• Well versed in Building and M&E Installation
• Able to plan and handle drawings details
• Able to liaise with sub-contractors, clients & consultants
• Candidate must possess at least a Professional Certificate, Diploma or a Bachelor’s Degree in Mechanical/Engineering from a recognized institution
• At least 5 years of working experience in Building & Construction in HDB (BTO) project
• Knowledge in Auto Cad is preferred

Responsibilities

- To attend service fault call, troubleshooting and rectification work at customers’ premises.

- To co-ordinate with the customer and sub-contractor for ad-hoc service works.

- To carry out periodic maintenance servicing.

- To provide technical support including installation, testing and commissioning.

- To provide standby after-office hours.

- Able to work independently.

- Able to travel for overseas jobs.

- Able to work in Construction Site.

Qualification Requirements

- ITE Nitec and above / Technical certification or Diploma in Building Services / Security / Electronics Engineering / Electrical Engineering / Related working experience.

- Basic technical knowledge on ELV, Networking and Security Systems (Public Address (PA), CCTV and Card Access) will be an advantage.

- Applicants with experience in Bosch Public Address System, Integrated BIS, Video Management System & Stentofon Intercom will be an advantage.

- Preferred with Class 3 driving licence.

• We are a chip design service company invested by an international consortium and founded by a senior chip design technical team.
• The company is headquartered in Singapore and will take root in Singapore for long-term development.
• In the future, we will also open branches in China, Japan and other places. The company has strong R&D capabilities and its core technical team members all have more than 10 years of experience in chip design.
• We have rich industry experience and deep practical accumulation in ASIC design and business management.

Our office is located in one North and walking distance from MRT.

We Provide competitive salary and compensation package for the right candidate.

Job Description：

1. Works with the front-end design team to complete the chip floorplan , clock architecture, and powerplan .

2. Takes charge of the physical design tasks from the Netlist to the GDSII, including P&R, formal verification, static timing analysis, physical verification, power analysis, design for reliability and tapeout.

3. Researches the physical design methodology of advanced process nodes, and builds an automatic physical design platform.

Position Requirements:

1. Holds a bachelor's degree or above in electronic engineering, microelectronics, or computer science.

2. At least 5 years of work experience in the digital backend design field. Hands-on project experience is required. Tapeout experience at advanced technology is prefered. ( for excellect junior candidates with 3+ years experience will be considerated )

3. Those with experience in TCL , Perl or Python script development and familiar with EDA tool design will be plus.

4. Strong communication ability, good confidence and self-movitation.

5. Bilingual and with good teamwork spirit.

6. Salary is negotiable for excellent candidates.

Our client, a well-known MNC company is looking for R&D Electrical Engineer (3-years renewable contract) position.

Responsibilities:

• Utilise 3D CAD design tools and perform high precision 3D printing (FDM & DLP)
• Utilise basic microcontrollers boards such as Arduino, ESP32 or STM32 to build simple circuit boards for sensor control and data acquisition
• Testing and assembly of electronics and mechanical parts and debugging of software using basic tools like python or C++
• Maintenance of laboratory inventory and laboratory administrative tasks (Procurement, equipment preventive maintenance/repairs and safety matters)
• Perform administrative works, such as ordering and payment with SAP system.

Requirements:

• Diploma/Higher NITEC holders in Bioengineering, Biophysics, Physics, Mechatronics, Electrical Engineering, Mechanical Engineering, Computer Engineering, or any related fields.
• Basic experience in 3D CAD design software, like Solidworks and Fusion360.
• Basic experience with microcontroller boards like Arduino, Esp32, STM32.
• Basic experience in handling simple electronics and basic hands-on soldering skills
• Prior experience or have interest in handling administrative tasks like raising Purchase Orders, payment requests, arranging preventive maintenance of equipment and liaising with vendors.

We regret that only shortlisted candidates will be notified.

PERSOLKELLY Singapore Pte Ltd | EA License No.: 01C4394 | UEN No. 200007268E Registration No.: R22108058 (Lee De Cong)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates collecting, using and disclosing my personal data for the purposes set out in the Privacy Policy which is available at www.persolkelly.com.sg I also acknowledge that I have read, understood, and agree to the said Privacy Policy.

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]