Responsibilities:

· Provide technical support in Satcom system management

· Assist customer in using the link budget tool for capacity planning and management

· Execute O&S activities to maintain Service Level Agreement

· Perform System health monitoring and security monitoring

· Prepare, execute and report preventive maintenance tasks

· Standby for corrective maintenance and provide ad-hoc on-site supports

· Lead and able to troubleshoot and resolve system issues

· Participate in continuous improvement activities on the Systems

· Support configuration management and obsolescence management

· Support patching of software as when required

· Update of documentation as when required

· Coordinate and liaise the technical meetings with all stakeholders

· Manage vendors for the delivering of their services

· Perform compliance assessment and reporting

· Manage documentation, change control and traceability

Requirements :

· Tertiary qualification (Diploma or Degree) in Electrical and Electronics Engineering, Computer Science, Information Technology, or other engineering related discipline

· Experience in SATCOM Systems is a must

· Experience in Satcom link budget calculation is an added advantage

· Minimum 3-5 years of working experience in an engineering role in project and service delivery

· Possess IT networking skills such as ability to configure routers/switches

· Knowledge on different communication protocols at Network and Application level i.e. TCP/IP, HTTP, FTP, LDAP, SNTP, etc.

· Experience in Linux operating system, network tool, and virtualization.

· Some knowledge of mechanical engineering is useful

· Able to work both independently and in a team-oriented, collaborative environment

· Strong oral and written communications skills.

Responsibilities :

• Work with overseas Business Line unit to perform installation, checkout, integration and testing of radar systems onboard vessels
• Participate in System interface and integration tests
• Work with platform contractor in shipyard for mechanical installation and cabling works
• Setup the radar system, align, calibrate and perform checks to prepare for acceptance tests
• Conduct acceptance tests in harbour and performance tests at sea
• Evaluate system performance and generate test reports
• Support end-users to resolve technical and maintenance issues during System warranty
• Manage and coordinate with stakeholders for other Integrated Logistics Support activities
• Interface with other technical support personnel, engineering and product management to escalate and resolve issues
• Monitor system performance and make continuous improvement
• Determine and implement specific technical needs to improve reliability and maintainability
• Track and report project/service status
• Establish close collaboration with stakeholders and ensure customer satisfaction
• Support bids activities when required

Requirements :

• Diploma/Degree in Electrical & Electronic or Computer Engineering or related discipline
• Minimum 5 years’ experience in engineering role in Communication & Surveillance projects
• Require knowledge on Linux system, Wireshark tool, network and cybersecurity
• Good experience working on radar systems onboard vessels
• Experience in performing system maintenance and handling of SLA
• Solid trouble-shooting skills and problem solving experience
• Ability to work both independently and in a team-oriented, collaborative environment
• Organized, motivated and focus on customer needs
• Require occasionally to work late and during non-office hours to complete the task in critical situations
• Readiness to travel overseas occasionally for trainings and meetings
• Familiar with defence business, physically fit and comfortable working on different military platforms
• Knowledge of Thales radar systems, especially FCR – STING/STIR will be an added advantage
• Ability to lead others and candidate with more relevant experiences will be offered for a senior position

Location: Multiple location (East/West/North)

Responsibilities:

1. Hardware and Software Management:Install and configure computer hardware, software, systems, networks, and printers.
   Replace components for servers, including mainboards, CPU, RAM, HDD/SSDs, network line cards/modules, transceivers, and cables.
   
2. Technical Support:Respond promptly to service issues and requests from customers.
   Provide technical support to address a wide range of IT-related concerns across various customers.
   
3. On-Site Support:Offer on-site support for IT issues at customer offices, ensuring timely resolution and minimal disruption to operations.
   
4. IT Inventory Management:Perform and maintain an up-to-date IT inventory list for customers.
   
5. Server Management:Handle server-related issues through the ticket system.
   Escalate complex server issues to the server supplier TAC (Technical Assistance Center) and diligently follow up on resolutions.

Requirements:

• Min Nitec in Computer Science, Information Technology or related disciplines
• Candidate with no experience is welcome to apply, training will be provided
• Proficient in equipment installation and troubleshooting.
• Strong knowledge of data center operations.
• Excellent organizational and communication skills.

I regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R21100604

Data provided is for recruitment purposes only

Business Registration Number: 201735941W.

Licence Number: 18S9037

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Psychology invites applications for a Temporary Management Support Officer (12-month contract). The candidate is expected to work about 24 hours per week and will be paid $15 per hour.

Duties and responsibilities will be split between the Clinical Masters and the Continuous Education and Training (CET) programmes.

Clinical Masters Programme (Clinical and Health Psychology Centre)

• Transfer data to One Drive from Titanium
• Online / Referral Registration
• Scanning of old protocols to One Drive – Client Case Folders, old case files to be shredded
• Assisting Admin on end and start of placement mattersConfiguration of laptops
  Housekeeping of intern rooms
  Housekeeping of SharePoint Folders
  
• Ad hoc: Maintenance of CHPC Test Library Protocols and kits
• Ad hoc: Assisting with Professional clients when available

Psychology CET Programme

• CET Advertising

1. Design advertising materials such as Poster, Website Banners, Brochures etc.
2. Design and develop our yearly Professional Certificate (PC) report
   

• Workshop Support

1. Booking of training venues
2. Liaising with caterers for setup
3. Attendance taking
   

• Post-Workshop Admin

1. Consolidating training results from trainers
2. Issuance of certificates
   

• Monitor participants who have completed the required workshops for a PC

Qualifications

A diploma holder good with computer skills and ability to design EDMs

Duties/Responsibilities:

• Responsible for the development and optimization of backend logic and interface functionality for mainline products, such as the App and web systems, promotional activities, etc.
• Communicate with designers, product managers, and relevant personnel to ensure product quality and development progress.
• Maintain and optimize product performance to enhance user experience.
• Collaborate with frontend developers to ensure the project has robust functionality.

Minimum Qualifications:

• A love of simple, well-tested code that is easy to extend and hard to break.

• BS or MS in Computer Science or a related degree

• 1+ years of software development proficiency, knowledge of atleast 1 of these languages – Java (preferred), Kotlin, PHP, Python, Scala, C#, Go.

• Good working knowledge of modern database & storage technologies, e.g. MySql, MongoDB, PostgreDB, MS SQL, Oracle

• You can communicate, write and present effectively

Preferred Qualifications:

• Hands-on experience on ChatGPT

• Familiarity with production deployments in AWS, Azure or similar public clouds

• Understanding of DevOps & CI/CD processes, as well as technologies for application deployment in the cloud such as Kubernetes

Job Description:

Be part of an exciting Team working on cutting-edge advanced packaging process technologies. Partner and work with various FAB users, to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production. Responsibilities will also include assisting in operations support in FAB clean rooms to make sure all rounded supports are provided.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, and professional individual.
• Oversee the Team spare/ chemicals / inventories stores – upkeep with good house-keepings, periodic cycle counts. Maintain the inventory database, ensuring timely and accurate recordings, raise purchase requests accordingly.
• Take charge and provide day to day supports in all logistics needs and initiate material/spare parts procurement when required to ensure smooth Fab operations.
• Accountable for the inventory movements required to enable smooth lot operations across IME Premises.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time.
• Work seamlessly with various stakeholders to provide logistics support and deliver inventory on time.
• Work towards and employ critical thinking, put-up good initiatives to move forward to digitalization.
• Ability to work in a multi-task environment.

Experience:

• Education: Diploma in engineering discipline. Preferably in supply chain logistic/ warehouse operations.
• At least 2 years of warehouse operations.
• Preferably some experience in semiconductor / manufacturing environment, with good wide contacts with semiconductor material suppliers, equipment vendors.
• Strong knowledge-based on excel skills and some knowledge of supply chain analytics.

Responsibilities

• Setup, manage and maintain product, middleware, big-data applications and services.
• Perform regular and ad-hoc server-side deployments, performance fine-tuning and troubleshooting.
• Capacity and Resource management.
• Prepare routine operation documentation.
• Requirements
  Diploma or higher degree in Computer Science, Engineering, Information Systems or related fields.
• Extensive and hands-on knowledge with Linux operating systems (Ubuntu, CentOS, etc.).
• Knowledge of Computer Network(TCP/IP, DNS, etc.) and OS.
• Hands-on experience with at least one of the programming languages: Bash, Python, Go.
• Passion and high sense of responsibility for work.
• Fast learning ability and a good team player.
• Detailed-oriented, cautious and prudent.
  Skills below are optional but preferable
• Experience with automation tools like Ansible, Jenkins.
• Experience with monitoring tools like Prometheus, Grafana etc.
• Experience with load balancing tools like LVS, Nginx,HAProxy.
• Experience with container technology such as Docker, Kubernetes.
• Experience with Kafka and Codis

If you are interested, kindly apply through mycareersfuture.

I regret to share that only shortlisted candidates will be notified.

www.dadaconsultants.com

EA Registration Number: R21100604

Data provided is for recruitment purposes only

Business Registration Number: 201735941W.

Licence Number: 18S9037

Job Responsibilities:

· Support continuous improvement efforts in daily operation and operations activities.

· Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.

· Analyse and provide timely respond to customer complaints.

· Interface with Customer and Operations to ensure product transfer to manufacturing are in accordance with approved requirements.

· Review mill cert, WPS, WQT, PQR

· Communicate with customer, 3rd party, prepare ITP and etc.

· Prepare Quality performance metrics and reports.

Requirements:

· Degree in Mechanical Engineering, Quality, or equivalent.

· Minimum 3 years work experience in Quality Management System in manufacturing environment.

· Good knowledge of ASME IX, AWS D1.1, ISO 9001, API is preferred.

· Strong command of English language, both oral & writing.

· Knowledge of subsea, structure, metal working industry is preferred.

· Knowledge of risk assessment principles and methods.

· Positive & proactive attitude.

Summary

The Apple Services Engineering team is one of the most exciting examples of Apple's long-held passion for combining art and technology. These are the people who power the App Store, Apple TV, Apple Music, Apple Podcasts, and Apple Books. And they do it on a substantial scale, meeting Apple's high expectations with dedication to deliver a huge variety of entertainment in over 35 languages to more than 150 countries! These engineers build secure, end-to-end solutions. They develop the custom software used to process all the creative work, the tools that providers use to deliver that media, all the server-side systems, and the APIs for many Apple services. Thanks to Apple's unique integration of hardware, software, and services, engineers here partner to get behind a single unified vision. That vision always includes a deep dedication to strengthening Apple's privacy policy, one of Apple's core values. Although services are a bigger part of Apple's business than ever before, these teams remain small, forward-thinking, and multi-functional, offering greater exposure to the array of opportunities here. As a software engineer on the Apple Services Engineering (ASE) Core Services team, you'll create and enhance features that elevate the customer experience for millions of users worldwide. Collaborating with cross-functional teams, you'll work on large-scale systems, leveraging distributed data stores with a focus on scalability and performance. We foster creativity, engineering excellence, and innovation to make a meaningful impact.

Description

You will be part of the server team that powers customer-facing features within the Apple client applications - Apple Music, Apple Podcasts, Apple TV, App Store, Apple Arcade, Fitness+ etc. Working multi-functionally with various teams across Apple to deliver some really exciting features to our customers. Thinking about web service performance is a constant thing for us, and we are searching for someone like-minded. If you are used to thinking about performance in terms of median, 95th percentile and 99th percentile, then we are looking for you! You would be someone who is not afraid to question assumptions, is a phenomenal teammate under tight deadlines and seeks problems with sophisticated technical solutions.

Minimum Qualifications

• Bachelors or Master’s degree in Computer Science/Engineering or equivalent technical discipline.
• At least 2 years professional software engineering
• Proficiency in JVM languages like Java, Scala, Clojure or other object oriented programming languages such as C++, GoLang, C# and etc.
• Deep knowledge of data structures and algorithms.

Preferred Qualifications

• Experience in designing and implementing RESTful APIs or other API technologies
• Advanced skill set in object-oriented design, complex data structures, and algorithms.
• Multiple years of experience developing and scaling high-availability, low-latency distributed systems
• Exceptional problem-solving, critical thinking, and communication skills.
• Expertise in writing robust unit and integration tests.
• Familiarity with NoSQL technologies, including but not limited to Solr/Lucene, Redis, Memcached, Cassandra, and Voldemort

Summary

The Apple Services Engineering team is one of the most exciting examples of Apple's long-held passion for combining art and technology. These are the people who power the App Store, Apple TV, Apple Music, Apple Podcasts, and Apple Books. And they do it on a substantial scale, meeting Apple's high expectations with dedication to deliver a huge variety of entertainment in over 35 languages to more than 150 countries! These engineers build secure, end-to-end solutions. They develop the custom software used to process all the creative work, the tools that providers use to deliver that media, all the server-side systems, and the APIs for many Apple services. Thanks to Apple's unique integration of hardware, software, and services, engineers here partner to get behind a single unified vision. That vision always includes a deep dedication to strengthening Apple's privacy policy, one of Apple's core values. Although services are a bigger part of Apple's business than ever before, these teams remain small, forward-thinking, and multi-functional, offering greater exposure to the array of opportunities here. As a software engineer on the Apple Services Engineering (ASE) Core Services team, you'll create and enhance features that elevate the customer experience for millions of users worldwide. Collaborating with cross-functional teams, you'll work on large-scale systems, leveraging distributed data stores with a focus on scalability and performance. We foster creativity, engineering excellence, and innovation to make a meaningful impact.

Description

You will be part of the server team that powers customer-facing features within the Apple client applications - Apple Music, Apple Podcasts, Apple TV, App Store, Apple Arcade, Fitness+ etc. Working multi-functionally with various teams across Apple to deliver some really exciting features to our customers. Thinking about web service performance is a constant thing for us, and we are searching for someone like-minded. If you are used to thinking about performance in terms of median, 95th percentile and 99th percentile, then we are looking for you! You would be someone who is not afraid to question assumptions, is a phenomenal teammate under tight deadlines and seeks problems with sophisticated technical solutions.

Minimum Qualifications

• Bachelors or Master’s degree in Computer Science/Engineering or equivalent technical discipline.
• At least 2 years professional software engineering
• Proficiency in JVM languages like Java, Scala, Clojure or other object oriented programming languages such as C++, GoLang, C# and etc.
• Deep knowledge of data structures and algorithms.

Preferred Qualifications

• Experience in designing and implementing RESTful APIs or other API technologies
• Advanced skill set in object-oriented design, complex data structures, and algorithms.
• Multiple years of experience developing and scaling high-availability, low-latency distributed systems
• Exceptional problem-solving, critical thinking, and communication skills.
• Expertise in writing robust unit and integration tests.
• Familiarity with NoSQL technologies, including but not limited to Solr/Lucene, Redis, Memcached, Cassandra, and Voldemort

As an Equipment Engineer, you will own all assigned toolsets. The preferred candidate can troubleshoot difficult and poorly defined problems related to mechanics, electronics, and processes using tool knowledge/experience, SPC, schematics, and other available resources. The candidate will collaborate extensively with the area maintenance team and process engineering. Some collaboration will be with tool vendors, other area engineers/managers, procurement, and production.

Responsibilities:

• Provide technical leadership and management of 200MM and 300MM Semiconductor processing equipment in Support of Main Stream Semiconductor Processes and Advanced Packaging processes. Highly desirable for a candidate to have a background in at least one of the following areas: Photolithography, PVD and CVD Thin Films, Dry Etch, Wet Etch /Wafer Clean, Diffusion, Bond, Electroplate (ECD), CMP, or Metrology (some areas may be combined).
• Work with process engineering to drive root-cause corrective actions for equipment failures, implement permanent solutions, and eliminate chronic and long-term down events.
• Lead continuous improvement teams to drive tool matching, availability, and throughput improvements and reduce risk.
• Management of new tool installation, start-up, and tool upgrades to increase fab capability and capacity, lower costs, and improve yields.
• Work with minimal supervision, balancing competing priorities, to serve the needs of the Maintenance, Production, and Development organizations.
• Participate in cross-functional teams that create efficiencies across all layers of the organization.

Required Qualifications

• Degree / Diploma with 10+ years of relevant Semiconductor Industry Experience in Mechanical, Electrical, or Chemical Engineering, Materials Science, Physics, or another relevant Engineering discipline.
• 6+ years of experience within the respective areas of expertise. Experience should include one or more: Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, and Wet Chemistry.
• Demonstrated experience with the application of structured problem-solving methodology.
• Positive interpersonal skills, highly energetic and self-motivated.
• Demonstrated ability to meet requirements and deliver results.
• Ability to manage and execute multiple projects simultaneously and shift priorities to meet business needs.

Preferred Qualifications

• Diploma or Bachelor of Science/Engineering in Mechanical, Electrical or Chemical Engineering or Materials Science, Physics or other relevant Engineering discipline.
• Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, Wet Chemistry.
• Positive interpersonal skills, highly energetic and self-motivated.
• Experience with Automated Fault Detection and Classification Systems (FDC).
• Strong background with utilizing SPC.
• High level of understanding of equipment component behaviour.
• Experience Integrating Equipment Maintenance Management Software

As an Equipment Engineer, you will own all assigned toolsets. The preferred candidate can troubleshoot difficult and poorly defined problems related to mechanics, electronics, and processes using tool knowledge/experience, SPC, schematics, and other available resources. The candidate will collaborate extensively with the area maintenance team and process engineering. Some collaboration will be with tool vendors, other area engineers/managers, procurement, and production.

Responsibilities:

• Provide technical leadership and management of 200MM and 300MM Semiconductor processing equipment in Support of Main Stream Semiconductor Processes and Advanced Packaging processes. Highly desirable for a candidate to have a background in at least one of the following areas: Photolithography, PVD and CVD Thin Films, Dry Etch, Wet Etch /Wafer Clean, Diffusion, Bond, Electroplate (ECD), CMP, or Metrology (some areas may be combined).
• Work with process engineering to drive root-cause corrective actions for equipment failures, implement permanent solutions, and eliminate chronic and long-term down events.
• Lead continuous improvement teams to drive tool matching, availability, and throughput improvements and reduce risk.
• Management of new tool installation, start-up, and tool upgrades to increase fab capability and capacity, lower costs, and improve yields.
• Work with minimal supervision, balancing competing priorities, to serve the needs of the Maintenance, Production, and Development organizations.
• Participate in cross-functional teams that create efficiencies across all layers of the organization.

Required Qualifications

• Degree / Diploma with 10+ years of relevant Semiconductor Industry Experience in Mechanical, Electrical, or Chemical Engineering, Materials Science, Physics, or another relevant Engineering discipline.
• 6+ years of experience within the respective areas of expertise. Experience should include one or more: Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, and Wet Chemistry.
• Demonstrated experience with the application of structured problem-solving methodology.
• Positive interpersonal skills, highly energetic and self-motivated.
• Demonstrated ability to meet requirements and deliver results.
• Ability to manage and execute multiple projects simultaneously and shift priorities to meet business needs.

Preferred Qualifications

• Diploma or Bachelor of Science/Engineering in Mechanical, Electrical or Chemical Engineering or Materials Science, Physics or other relevant Engineering discipline.
• Semiconductor Wafer Handling, RF Power, High Vacuum, Toxic Gas Delivery systems, Precision Optics, Wet Chemistry.
• Positive interpersonal skills, highly energetic and self-motivated.
• Experience with Automated Fault Detection and Classification Systems (FDC).
• Strong background with utilizing SPC.
• High level of understanding of equipment component behaviour.
• Experience Integrating Equipment Maintenance Management Software

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

• Position : Technical Sales Engineer (Electronics/Junior Role) - Up to $4,500 + Commission
• Location : West – Bukit Batok Crescent
• Working hours: Monday to Friday | 8.30am to 5.30pm
• Salary (commensurate with experience) : Up to Basic of $4,500 + Average Incentives of $1,000 + AWS + Variable Bonus + Transport Reimbursement/Allowance + Mobile Phone Allowance + Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Industrial Automation

Main Responsibilities:

• Responsible for preparing quotations, proposal according to customer’s requirements
• Plan sales visits, customer calls
• Service existing clients and proactively identify and develop new customers and markets
• Conduct product training and presentation to customers
• Follow up on sales lead, sales orders and deliveries
• Provide application/product support to customers and internal sales team
• Provide post sale and presale application and sales support by analysing and recommending solutions to meet customer’s needs.
• Using technical skills to demonstrate to potential customers the usefulness of the product and how it may suit the customer better than competing products..

Requirements:

• Diploma/ Degree in Electronics / Electrical / Engineering/ Industrial/ Mechatronic/Mechanical
• No experience required/ Entry level candidates are welcome to apply
• Training on products will be provided
• Bilingual in English and Mandarin to communicate with colleagues who can only speak in mandarin

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

Responsibilities

• To perform all roles and responsibilities required of site supervisors under the Building Control Act.
• To supervise the timely execution of the works and maintain quality control and ensure that the works are carried out in accordance with the contract specifications, drawings, allocated timeframe, all other contract documents, and site instructions.
• To check all drawings and specifications to ensure that works are carried out in accordance with the approved plans for discrepancies and report to the Superintending Officer / Consultant / Qualified Person as stated below:
• Check shop drawings submitted by contractor.
• Check as-built drawings and Operation & Maintenance Manual submitted by contractor.
• To check on quality of materials and samples delivered to site and report to Superintending Officer / Consultant / Qualified Person on any materials that are not conforming to the specifications.
• To check mock-ups done on site, where necessary.
• To ensure that the required construction tests in connection with the construction works are carried out where necessary.

Qualifications

• Possess Diploma in Civil Engineering/Architecture.
• Registered Resident Technical Officer with IES / ACES.
• Minimum 3 years’ experience as RTO in supervision of works similar in nature to major construction works in buildings, civil, HDB carpark.

PRODUCT AREA

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

JOB DESCRIPTION

A problem isn’t truly solved until it’s solved for all. That’s why Googlers build products that help create opportunities for everyone, whether down the street or across the globe. As a Technical Program Manager at Google, you’ll use your technical expertise to lead complex, multi-disciplinary projects from start to finish. You’ll work with stakeholders to plan requirements, identify risks, manage project schedules, and communicate clearly with cross-functional partners across the company. You're equally comfortable explaining your team's analyses and recommendations to executives as you are discussing the technical tradeoffs in product development with engineers.

Our goal is to build a Google that looks like the world around us — and we want Googlers to stay and grow when they join us. As part of our efforts to build a Google for everyone, we build diversity, equity, and inclusion into our work and we aim to cultivate a sense of belonging throughout the company.

Qualifications

JOB RESPONSIBILITIES

• Manage optical transport infrastructure and capacity delivery within the Asia Pacific region.
• Manage the delivery of network projects composed of metro/long-haul systems and fiber, leased wavelengths, circuit adds/moves/changes/disconnects, power, cross-connects, inside plant fiber, and more from inception through delivery.
• Lead cross-functional teams and manage multiple network projects with competing priorities, and ensure stakeholders are informed of project status.
• Engage with external vendors for network build services, liaise with engineering staff to determine root causes and solutions, and present the team's analyses, recommendations, and approaches to stakeholders and executive management.
• Assist upstream planning, design, and acquisition teams in developing infrastructure requirements, priorities, and delivery date expectations.

MINIMUM QUALIFICATIONS

• Bachelor's degree or equivalent practical experience.
• 2 years of experience in program management.
• Experience in project management with network infrastructure and capacity delivery.
• Experience in network engineering or related technical roles in the telecommunications or internet industry.

PREFERRED QUALIFICATIONS

• Knowledge of project management in the deployment of terrestrial or subsea optical network infrastructure engineering design and construction projects.
• Ability to identify opportunities for and drive cross-functional process improvements across the organization.
• Ability to manage project priorities and technical resources and have relationships with multiple partner-teams, directors, or vendors.
• Excellent communication skills, with the ability to solve issues with a data-driven analytical approach.

Responsibilities

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Requirements

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Candidate must have min 6 years of relevant working experience in design engineering of ACMV / HVAC, Fire Protection and Plumbing services with Engineering Consultancies in Singapore
• Proven track record of working across organization boundaries to define requirements, solve complex problems and drive programs to successful completion
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)
• BIM and CAD capabilities (REVIT / Microstation / Autocad) will be added advantage

Responsibilities

Responsible for Electrical Engineering services for the projects from concept stage, design development, contract documentation, authority submissions, site administration to project completion

Conduct technical discussion on common design problems

Assist in maintaining high quality standards of design and construction

Responsible to participate and support the Company’s SHEQ within their scope of duties

Requirements

Recognised Degree in Electrical Engineering

Minimum 3 years of relevant experience in industry

Job Summary:

We are seeking a skilled System Engineer to provide maintenance services for our customers, with a focus on Linux systems. The engineer will be responsible for ensuring the continuous operation, stability, and security of IT infrastructure across multiple customer environments. This role requires the ability to manage and respond to the support needs of different customers as they arise, delivering high-quality service and support. The position also requires 24x7 standby availability with a duty phone, rotating on a weekly basis among team members.

Key Responsibilities:

• Customer System Maintenance:
• Perform routine maintenance tasks on Linux (RedHat) servers for multiple customers, including updates, patch management, and system tuning.
  • Verify backup processes for various customer systems before working on it, ensuring in the unfortune event, the data or system can be restored.
• 24x7 Standby and Incident Response:
  • Be available on a 24x7 standby basis with a duty phone, rotating weekly among team members.
  • Respond promptly to support calls and emails from different customers, diagnosing and resolving issues to restore normal operations.
  • Manage multiple customer incidents concurrently, ensuring timely and effective communication with each customer.
• Troubleshooting and Support:
  • Provide technical support for complex system issues across multiple customer environments, collaborating with other teams as necessary.
  • Maintain detailed records of customer incidents, troubleshooting steps, and resolutions for future reference and to improve service delivery.
• Documentation:
  • Create and update documentation related to customer system configurations, maintenance procedures, and incident management.
  • Ensure all maintenance activities for customers are well-documented and accessible to the team.

Required Qualifications:

• Education: Bachelor's degree in Computer Science, Information Technology, or a related field.

Responsibilities
• Responsible for Database(MSSQL) architecture design, optimization, and maintenance of the company's core application systems, ensuring high performance, availability, and security of the database system.
• Responsible for Database(MSSQL) troubleshooting, emergency response, monitor database performanceanalyzing and resolving database performance issues, promptly and accurately identifying the root cause of problems.
• Responsible for Database(MSSQL) and Middleware(Redis/Kafka/MongoDB/MySQL) trouble shooting and optimization.
• Work closely with the development team to provide database technical support for application development.
• Designing and enforcing DBA procedures standards and rules.
• Track new technologies and development trends in the database field, research and introduce technology solutions suitable for the company.

Requirements
• Bachelor's degree or above in computer science or related field, with over 5 years of experience in MSSQL database development.
• Proficient in MSSQL database architecture, management, performance tuning, and security policies, with experience in designing and managing large-scale database projects preferred.
• Proficient in at least one BI product, able to proficiently integrate, clean, and analyze data.
• Familiar with non-structural databases such as MongoDB hands-on skills for performance tuning.
• Familiar with Windows and Linux scripting languages such as CMD or Shell.
• Experience in operating Alibaba Cloud database products is preferred, and experience in using AWS database products is preferred.
• Good communication skills, project promotion skills and self-learning skills.
• Have security awareness of database operation and management.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Engineer / Senior Engineer to be part of our Supply Chain Department diverse team of talent. You will be responsible to support Company’s Environmental, Social and Governance (ESG) projects.

What you will be working on:

Project Management

- Lead and manage ESG projects & initiatives from inception to completion, ensuring alignment with corporate sustainability goals.

- Develop project plans, timelines, and budgets, and coordinate resources effectively.

- Prepare Capex Justification presentation in an accurate and timely manner to facilitate Management Team decision making

- Project lead in a cross functional team to ensure project schedule is executed in a timely manner and meeting project budget

Supply Chain

- Assist and take lead to drive the initiatives especially on Scope 3 Emissions

- Assess and quantify upstream and downstream emissions from the organization’s value chain, including suppliers, products, and waste disposal.

- Collaborate with suppliers and partners to develop and implement emission reduction initiatives, such as sustainable sourcing practices and transportation efficiency improvements.

- Review Supply Chain SOP & OI and ensure they are updated to ESG requirements

Reporting and Compliance

- Support Supply Chain Department on Company’s requirements for reports on sustainability metrics, including greenhouse gas emissions, energy consumption, and waste generation.

- Ensure compliance with regulatory requirements and industry standards related to sustainability and environmental management.

- Handle Compliance, Internal, Exernal and Customer audits to ensure compliance

- Liaison with related government bodies on grant and commercial apects

Continuous Improvement:

- Monitor and evaluate the effectiveness of sustainability initiatives and recommend improvements based on data analysis and industry best practices.

- Stay updated on emerging trends, technologies, and regulations in sustainability and incorporate relevant advancements into project strategies.

More about you:

• Degree in Chemical/Gas, Mechanical, Environmental, health and safety & other engineering.
• Possess knowledge on ESG, IPCC, RCA
• Preferably 4-5 years purchasing experience or engineering experience in a front end semiconductor plant .
• Knowledge and relevant experiences in Conflict Mineral, Green Procurement is a bonus.
• Knowledge in handling audits for Scope 1 emissions is a bonus

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Responsibilities

• Responsible for Electrical Engineering services for the projects from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as mentor to new employees and provide technical assistance
• Advise engineers on the project administration and contractual issues
• Conduct technical discussion on common design problems
• Assist in maintaining high quality standards of design and construction
• To promote esprit de corps amongst employees
• Responsible to participate and support the Company’s SHEQ within their scope of duties

Requirements

• Recognised Degree in Electrical Engineering
• Minimum 5 years of relevant experience in industry

MedTech Catapult is a national initiative for accelerating the development of high-value MedTech projects through an in-house product engineering unit. This productization unit is responsible for supporting the development of technologies through the medical device development cycle to produce full-fledged hardware product systems. The Lead Engineer will report to the Lead, Product Engineering.

Job Responsibilities:

• To provide electronics and instrumentation design capability in support of the design, development, test and manufacture of safety critical products and processes for complex medical technology product solutions.
• To interact closely with engineers from other disciplines to achieve an optimized design within the stipulated project schedule.
• To design and develop PCB and control systems for next generation medical devices.
• To provide operational electronics development, prototype design and testing - both analogue and digital.
• To conduct PCB schematic capture and layout, including component selection and testing.
• To build and test prototypes and document the design and performance of these.
• To create embedded system design and implementation.
• To conduct EMC testing with in-house equipment and through liaison with EMC test house for electrical safety and medical device compliance.
• To support development of intellectual property portfolio in device design and process technology know-how.
• To provide clearly documented records of technical data, decisions, methodologies, calculations and software use in accordance with ISO/FDA quality standards.
• To support the Procurement and Engineering teams for sourcing and defining specifications.
• To conduct error and tolerance sensitivity analysis, reliability analysis, reliability testing and reliability test program design.
• To support CAD-based electro-mechanical integration, at the component level, board level and assembly level.
• Write and review documentations for QMS.
• Interface with external parties (design houses) to communicate product requirements.
• To support other activities for product engineering when required.

Requirements

• MSc/BSc in Electrical Engineering or Computer Engineering.
• >10 years experience in medical devices (e.g. electronic product design).
• Has a good knowledge and understanding of i) Processes of electronic product development and realization, ii) operation and design of electronic systems and circuits; iii) Regulations applying to medical devices, iv) Electronic device operation and fabrication and v) Electronic sensors, measurement systems and instrumentation.
• Experience with PCB design ? digital and analogue.
• Proficient in HDL languages (Verilog, System Verilog).
• Knowledge of ASIC design and sign-off.
• Familiarity with scripting languages like Python, Perl, or C/C++ is a plus.
• Experience with design, development or manufacture of photonic systems or photonics-enabled products is a plus.
• Experience with the use of simulation tools for electronic design is a plus.
• Experience with Medical device ISO standards including ISO9001, IS013485, ISO 14971 and IEC 60601-1 and managing QMS.
• Good collaboration skills, organised and detailed.
• Demonstrate strong interpersonal skills and leadership skill.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

MedTech Catapult is a national initiative for accelerating the development of high-value MedTech projects through an in-house product engineering unit. This productization unit is responsible for supporting the development of technologies through the medical device development cycle to produce full-fledged hardware product systems.

The Lead Engineer will report to the Lead, Product Engineering.

Job Responsibilities

• Responsible for software engineering efforts for integrated medical technology product solutions.
• Responsible for software architecture design and FW requirements specifications generation.
• Design, develop and implement embedded SW for medical instruments and devices and related interface systems using a variety of languages (e.g. C#, ASP.NET etc.), ensuring optimal performance, reliability, and power efficiency.
• Lead software risk management and DFMEA, software verification and validation activities from early concept phase through release to manufacturing according to IEC 62304.
• Responsible for software integration and implementation for embedded systems, ensuring products are according to design requirement.
• Write and execute complete testing plans, protocols, and documentation.
• Identify, debug, and create solutions for issues with code and integration into application architecture.
• Incorporate real-time data acquisition from sensors and closed loop control algorithms and verify real-time closed loop control of systems parameters.
• Support development of intellectual property portfolio in device design and process technology know-how.
• To interact closely with engineers from other disciplines to achieve an optimized design within the stipulated project schedule.
• Write and review documentations for QMS.
• To support other activities for product engineering when required.

Requirements

• Degree in Information Technology, Computer Science, Electronics or a related discipline.
• Minimum 10 years of experience in developing embedded firmware with hardware integration experience related to MedTech applications.
• Complete product lifecycle experience including early concept work, and successful transfer of designs into manufacturing.
• Experience with electrical components such as ADC, DAC, stepper and dc motors, image sensors, Ethernet, I2C, SPI, USB and CAN.
• Good experience with ARM processors or other microprocessor architectures.
• Knowledge of computer architecture and operating systems.
• Familiarity with variety of Operating systems including Windows, MacOS X and Linux; and Mobile platforms, including iOS and Android.
• Familiarity with Network technologies, including TCP/IP, Bluetooth, Zigbee, WiFi and Modbus.
• Familiarity with Languages such as C/C++, C#, Python, MATLAB, and Java.
• Experience managing QMS and proficient with GMP guidelines.
• Good collaboration skills, organised and detailed.
• Demonstrate strong interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.