Total 87 production engineer job vacancies in Manufacturing / Production category in D12 Balestier, Serangoon, Toa Payoh

Responsibilities:

● Execute production/ maintenance work by following manufacturing process work instructions

● Prepare, install, program, or repair programmable components.

● Perform configurations, recordkeeping, and quality check efforts.

● Perform minor repairs and replacements for robots.

● Work closely with departments to ensure committed schedules are met.

● Liaise with the Supply Chain department in receiving items, requesting, and maintaining relevant inventory.

Requirements:

● Experience in electrical/ mechanical engineering is required

● Nitec, Diploma, or Degree in Electrical Engineering Technology or similar, some experience in a Production Line will be an advantage.

● Strong communication skills in English (Experience in technical writing will be an advantage) Google Suite, Microsoft Office. Knowledge of Linux/ Ubuntu is good to have.

● Basic Hand tools and troubleshooting skills.

This role is within Package and Development Engineering (PDE) group of Micron. This is a global department with teams located in USA, Singapore, Malaysia, Taiwan, and India. As a PDPE (Package Device Product Engineer) in PDE, you will be responsible to prepare for new DRAM, NAND or MNAND products and coordinate resources, testing, and analysis over the lifecycle of the product. You will run data analysis and modelling, create, and maintain root cause analysis documentation, analyze parametric, probe level (Front End) and electrical test (Back End) data and respond to failures. In this role, you will work with various Technology Development (TD) & New Product Introduction (NPI) Engineering (Electrical Failure Analysis (EFA), Physical Failure Analysis (PFA), Assembly) and Manufacturing groups to find the root causes of the failed units.

Responsibilities and Tasks

• Enable new test signals in BE which would capture assembly related failures.
• Work with Test Solution Engineering (TSE) & Product Engineering (PE) to ensure standardize test coverages & chars. Define Char limits, and approval of any test related changes.
• Development of new out-of-control-action-plan (OCAP) and its sustenance
• Provide Lot disposition based on parametric data observation in case of out-of-control (OOC) trigger.
• Ensure that Silicon & assembly process meets Product expectations by extracting and analyzing Probe and BE test data.
• Participate in Phase Gate review meetings, presenting the data analysis and deciding on Phase Gate exits related to electrical Test data.
• Analyze test failures, coordinating EFA & PFA to identify the root cause. Implement fixes for fails (Fab process or Design or Assembly Process)
• Finding out the correlation of test failures to assembly process and updating the database with the signatures observed
• Support Global and Local material review board (MRB) in case of excursions and RMA related to package intrinsic design. This includes analyzing electrical test data for root cause analysis (RCA) and assessing the health of the contained material.

Requirements

• Bachelors/ Masters in Electronics, Device Physics, Applied Physics, Electrical
• Sound knowledge of device physics
• Knowledge in Engineering Statistics
• Experience in data (electrical) analysis and modelling (JMP, Spotfire is a plus)
• Experience in programming (Python or Perl)
• Effective communication skills in written and spoken English
• Good multitasking and organizational skills, able to make decisions in complex situations
• Excellent problem solving and analytical skills
• Experience in NAND / DRAM memory or related field
• Knowledge in semiconductor packaging assembly processes
• Experience in fabrication processes, electrical characterization techniques, metrology techniques

Potential candidate is responsible for overseeing the production process of any printed materials such as label stickers, brochures, flyers, and pamphlets.

He/She will supervises a team of printers and plan and coordinate print jobs, oversees the printing process of various print materials, signage—anything that can be printed by a company and ensure the quality of printed materials,

Maintaining quality standards while meeting production targets. Managing production schedules and resource allocation. Working with cross-functional teams to improve processes.

Must be able to oversee multiple projects simultaneously. Strong project management skills essential for coordinating activities, managing resources, and ensuring projects are completed on time and within budget. This includes setting project goals, developing plans, and monitoring progress

He/She must have exceptional leadership skills, including the ability to mentor and develop other section Leaders. Skills in change management and organizational development are essential, as He/She may be responsible for implementing new production methodologies across the company.

Basic salary: ($3,000 - $4,200)

Location: Serangoon

Working hours: Mon - Fri, 8.30am to 6pm

Job Description

• Plan materials requirement according to production schedule and to ensure optimal inventory levels
• Monitor production schedule to meet delivery requirement
• Work closely with Testing team and arrange production staff to work according to schedule

Job Requirements

• Diploma in Manufacturing / Production / Electronics Engineering
• Minimum 2 years of relevant work experience in electronics manufacturing industry
• Experience with ERP system
• Team player with supervisory, interpersonal and communication skills
• Able to communicate in both English and Mandarin to work closely with internal customers, buyer and sub-contractors

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Job Responsibilities:

• Manage day to day operation based on inventory needs, new product introduction, equipment efficiency and resource optimization while maintaining GMPs compliance.
• Streamline company’s production process in order to maintain an efficient and effective team.
• Perform Quality Measures of staff performance.
• Assist in Internal Quality Audits (IQA).
• Plan, organize, direct and control of daily production with production supervisor.
• Evaluate, improve product quality, production efficiency, work procedures and safety enhancement in accordance to food safety and GMPs.
• Manage cost performance and be responsible for daily production yield and output.
• Staff development and improve staff competency.
• Preparing monthly production report, provide support for new product launch and to review documents and reports.

Job Requirement:

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in any field.
• At least 3 Year(s) of working experience in the related field is required for this position.
• Preferably Senior Executive specialized in Manufacturing/Production Operations or equivalent.
• FMCG / Food Manufacturing experiences will be advantage
• Knowledge of ISO22000:2005, BRC issue 8, HACCP
• Knowledge of Business Central 365 (Microsoft Dynamic Navision)
• Microsoft office (excel, powerpoint, outlook)

Interested applicant may send your cv/ resume via whatsapp 84597671

NPI Production Senior Supervisor

Responsibilities:

- Lead new project line set-up for new medical device products

- Develop and implement production processes

- Supervise production teams & provide mentor and support.

- Ensure quality standards and compliance

- Collaborate with cross-functional teams

Requirement:

- 5+ years of experience in medical device production

- Proven leadership and supervision skills

- Strong knowledge of industry regulations and standards (Such as ISO13485/ ISO9001, FDA audit experience)

- Excellent communication and problem-solving skills

As a Manufacturing Engineer at MSB, you will be responsible for executing area resource plans in terms of logistics and indirect piece parts and managing, developing employee performance.

In this role some of the tasks that need to carried out include exploring continuous improvements activities to assist area management in running the production in a cost efficient and effective manner. You will need to forecast unplanned or ad-hoc staffing and training needs, monitor area performance and provide performance feedback, mentoring, and career development where appropriate.

Other responsibilities include ensuring a safe work environment by performing regular work area inspections and conducting timely event investigations. You will be working with various engineering and manufacturing groups throughout the company.

Requirements

• Bachelors / Masters in Mechanical Engineering, Mechatronics Engineering, Electrical and Electronics Engineering, Materials Engineering, Industrial & Systems Engineering, Chemical Engineering or related field.
• Has leadership experience and potential
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations
• Background in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals will be beneficial

Keen for the role? Apply now!

Develops, implements and maintains methods, operation sequence and processes in the manufacture or fabrication of parts, components, sub assemblies and final assemblies. Interfaces with design engineering in coordinating the release of new product. Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines. Maintains records and reporting systems for coordination of manufacturing operations.

Qualifications and Skills:

• Able to use Photoshop and illustrator is a plus.
• Proven experience as a Printing Technician or in a similar role within the printing industry.
• Proficiency in operating and maintaining printer.
• Knowledge of different printing techniques and processes.
• Familiarity with various types of printing materials and inks.
• Ability to work independently and as part of a team.

• Familiarity with multi-tier server architecture (Application, Web, Database).
• Hands-on experience with Oracle, SQL Server, or MariaDB.
• Proficiency in web services, including protocols like SOAP & REST.
• Knowledge of system applications such as backup software, Application Server - Jboss, Web Server - Apache, Messaging system - MQ / AMQ
• Experience in CI/CD pipeline tools like Jenkins using OpenShift cloud platform

The Production Manager will be responsible for overseeing all aspects of production operations, ensuring the efficient and timely delivery of high-quality products. This role demands expertise in production planning, team coordination, quality assurance, and continuous improvement, with a focus on maintaining Star Ark’s standard of excellence.

Responsibilities:

• Plan materials requirement according to production schedule and to ensure optimal inventory levels
• Monitor production schedule to meet delivery requirement
• Work closely with Testing team and arrange production staff to work according to schedule

Requirements:

• Diploma in Manufacturing/Production/Electronics Engineering
• Minimum 2 years of relevant work experience in electronics manufacturing industry
• Able to communicate and work closely with internal customers, buyer and sub-contractors
• Experience with ERP system
• Team player with supervisory, interpersonal and communication skills

Role and Responsibility :-

• To provide quality day-to-day L2 Production support for Java/Web-based application.
• To coordinate and support infrastructure maintenance activities.
• To manage implementations of new application releases, adhering to the best practices of the release management process.
• To work with various partners such as Peer Application Teams, Infrastructure, Vendors, Security and Change teams, to provide seamless support for the business.
• To manage Production issues by responding in a timely manner in accordance to the Service Level Agreement with the Business.
• To enhance existing support process to maintain/improve service level & quality.
• At least 2 years working in an L2 Application Support Environment

Core technical competency required :-

• Linux; Unix Shell Scripting
• SQL (MYSQL/MSSQL)
• Java/Web-based
• OpenShift/Docker

Good to have experiences :-

• AngularJS
• ActiveMQ
• Elastic Search
• Application Monitoring Tools
• CI/CD (Continuous Integration & Continuous Deployment)
• Python
• Microservices concept

Responsibilities:

• Plan materials requirement according to production schedule and to ensure optimal inventory levels
• Monitor production schedule to meet delivery requirement
• Work closely with Testing team and arrange production staff to work according to schedule

Requirements:

• Diploma in Manufacturing/Production/Electronics Engineering
• Minimum 2 years of relevant work experience in electronics manufacturing industry
• Able to communicate and work closely with internal customers, purchasing team and sub-contractors
• Experience with ERP system
• Team player with supervisory, interpersonal and communication skills

• Initiate product marketing and promotion activity of assigned product to expand the business regionally and globally.
• Provide technical support to get design wins for immediate opportunities and solve technical troubleshooting.
• Work with internal stakeholder, manage marketing & promotion activity by PDCA system.
• Enhance promotion activity and proactively investigate regional unique inquiry.
• Perform market research include but not limited to market analysis, capture ecosystem and identify key players & competitors.
• Collaboration project involving bundle promotion, product Q&A, product training with Regional Strategic Marketing section.

Job Requirements

• Bachelor degree in electronic and electrical engineering or other related field.
• Knowledge of electronics, device and market ecosystem, and good market analysis skills.
• Able to travel within ASEAN, India, Ocenia and Japan region.

For interested applicant, click 'apply'

EA Reg no: R1328476
EA License No: 16C8443
EA Personnel Name: Melody
EA Personnel No: R2095899

Meet the Team

As part of our team, you’ll work on groundbreaking technologies that impact the world, from products that simplify home automation and address medical issues to solutions that reduce energy waste and enable sustainable infrastructure.  You will also be supported by a team that values learning from each other and helping one another succeed.

This role will develop test strategies for ICs, including improvement of existing production test solutions. Role will also be involved in yield improvement and costs reduction while maintaining excellent product quality.

Responsibilities

• Support Test Solution Improvement for Cost Reduction, and Yield Improvement
• Support Tester or Handler platforms migration to attain low test cost and address test setup capacity constraints.
• Responsible for “Technical Product and Test Knowledge” required to guide internal team
• Provide best-in-class test program and product quality.
• Provide remote debug and technical support to offshore factory sites to resolve any Test Solution Related Issue
• Integrate test instruments or test screen from bench setup into test program.

Skills You Will Need
Minimum Qualifications:

• EE / Computer Engineering Bachelor with minimum 10 years of relevant working experience or Master Degree with reduced experience required.
• Work experience in a semiconductor preferably as a Test Engineer or Test Development
• Manufacturing/Sustaining PTE Qualification
• Strong understanding of ATE Test Programming principles, with experience in RF, Mixed-Signal or MCU testing
• Must have experience with industry standard Automated Test Equipment – Teradyne (Flex, J750) preferably, and other Mixed Signal or RF testers
• Test Program development experience & skills, including knowledge of C/C++, VB, MCU Assembly Language, PERL, Python, Scripting
• Advanced Bench Equipment Skills/ IC Application knowledge.
• PCB Hardware design knowledge & RF signal process trouble shooting skills.
• Good PCB Assembly and soldering skills
• Excellent team working ability as self-motivation, innovation, and individual contribution
• Able to mentor and provide training for internal team
• Demonstrable good project management and communication skills

Benefits & Perks:
You can look forward to the following benefits:

• Employee Stock Purchase Program (ESPP)
• Medical and dental insurance coverage including spouse and child(ren)
• Bi yearly health screening and flu vaccination
• Office location is above Tai Seng MRT station

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

• To supervise the work of sub-contractors and work closely with other operations staff to meet the project schedule
• Report to the Construction Manager
• You will adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship so as to meet the stringent requirement conducted during site tests and inspections
• Prepared and Assembled ready wooden cabinetry to drawings and specifications for installation.
• Verified dimensions and checked the quality and fit of pieces.
• Measured and marked dimensions of sites.
• Performed Cabinet assembly with the use of hand tools.
• Assisted with all aspects of the assembly team.
• Read detailed schematics for cabinets and executed assembly accurately.
• Helped with delivering and manually installing cabinets.
• Installed cabinets in residential homes.
• Minimum 3 years of relevant experience in the Construction Industry
• Possess a certificate in Building Construction Safety Supervisor (BCSS)
• Supervisory experience in foundation & structural works on site
• Able to work independently with a positive attitude

Role Profile

This role pursues sales targets for the Company’s products and provides technical advisory for the sales team and customers.

Key Responsibilities:

Engineering

• Organize marketing activities and products demonstrations to architects, designers, developers, and contractors to showcase the features and benefits of our product
• Provide technical support and advice to product representatives, customers and contractors

Sales

• Develop and execute a sales strategy to achieve sales targets and expand customer base within the construction sector
• Identify and prospect potential customers, including contractors, and construction firms
• Provide accurate and timely quotations, negotiate contracts, and close sales deals
• Maintain strong relationships with existing customers through regular visits, follow-ups, and addressing their needs
• Raise purchase requisitions and collection of payment from customers when falling due

Competence (Knowledge, Skills and Abilities):

• Understanding and knowledge of Construction / Building / Architecture operating environment
• Skills in preparation of materials and presenting in small group settings (user demo and training, customer presentation)
• Skills in negotiation with customers and suppliers on requirements
• Skills in relating to and servicing the customers with a win-win mind set
• Skills in managing the sales process, including sales proposal, negotiation and closing the sales

Requirements:

• Strong technical knowledge of in-house products
• Able to deal with routine tasks and perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures, and direction
• Adaptable to changes, new ideas and technologies to improve processes and efficiencies

Education & Experience:

· Minimum Degree in Mechanical / Civil Engineering or its equivalent

· Minimum 3 years of sales experience preferably with building / technical product knowledge

Job Description

• Interface with Design Engineering team for the release of new products (NPI) into Manufacturing
• Involve in product development and evaluate the design for manufacturability and reliability by participating in design reviews and the assembly of the prototype units.
• Drive continuous improvement to minimize Cycle time/Quality issues.
• Perform First Article qualifications for parts and obsolescence components.
• Generate and Maintain process and equipment work instructions, drawings, and other production document to conform to specifications.
• Work with suppliers to resolve component/yield/part problems in a timely manner and assist purchasing teams in driving supplier quality improvements and cost reductions efforts.
• Provide strong technical support to production team to resolve issues and ensure on time shipment.
• Perform detailed Failure analysis on Infant Mortality parts and come up with proposal and concepts to enhance performance.
• Apply 8D troubleshooting, including driving learning and standardization to improve spare part quality.
• Create ECO (Engineering Change Orders), Structuring BOMs and creating test and assembly documentation as needed.
• Provide fly and fix support on field escalations for analysis/resolution on any issue requiring in-depth knowledge on the product.

Job Requirements

• Master’s/bachelor’s degree in mechanical engineering/Mechatronics Engineering with 2 or more years of experience in high-mix-low-volume manufacturing
• Strong mechanical engineering fundamentals, including design principles, machine elements, materials, and fabrication methods.
• Proficient with CAD, ProE/Creo/Solidworks.
• Good Understanding of the Pneumatics, Computers, controls systems and sensors involved in Electromechanical stage/Robot.
• Strong troubleshooting and analytical skills to support technical issues, set-up experiments, and perform data analysis.
• Ability to read and understand Mechanical drawings and use a variety of precision testing and measuring instruments as needed.
• Experience in semiconductor equipment industry /manufacturing is preferred.
• Team player, Self-driven, Willing to learn.
• Expected to travel up to 20% of the time.

Job Specification • Overall responsible for the QA/QC and R&D functions • To lead and ensure a productive and high-performance QA and R&D work environment • To provide effective and efficient technical support services to support the company’s business growth and operations. • To develop and revise the quality assurance framework for the company and to modify and improve the existing production standards and Standard Operating Procedures (SOPs), when necessary. • To collaborate with all departments, customer, suppliers and government regulatory bodies to ensure that quality is a high priority in the company. • To drive projects and processes to ensure compliance with the various food safety and hygiene standards and requirements. • To lead and report on quality audits, identify and resolve problems highlighted in yield reports. • Ensure that all food safety, quality related and non-compliance issues are investigated and that corrective measures are implemented and adhered to. • Oversee of GMP and food safety training for Production personnel. • To be involved in the feasibility study for setting-up overseas factories. • To perform new product development from ingredient sourcing, laboratory and kitchen trials to commercialization, focusing especially on sauces. • To conduct continual improvement of existing products. • To conceptualize new and innovative products. • To source for new and alternative suppliers. • To conduct sensory evaluation and approval of new and/or alternative raw materials. • To prepare product costings based on raw materials and manufacturing costs. • Collaborate with the Marketing department to understand the customers’ needs and requirements and to also assist in troubleshooting customers’ technical issues (when necessary). • Ensure all product creation complies with customer, government and legal regulatory requirements within the country of use. • To conduct product stability and shelf-life studies of new products. • To develop innovative solutions to help grow and value-add to customers’ requirements, ensuring that any solutions provided are within the stipulated cost parameters and manufacturing capability. • To facilitate the handover of new product(s) so as to ensure the smooth transition from test kitchen to Production. This includes liaising with the Technical / Production Manager to ensure that the product development fits the site capabilities. • Ensure the cleanliness and orderliness of the laboratory. • Liaison with China customers and distributors to support China market. • Any other appropriate duties and responsibilities as assigned by the Management. Requirements: • Bachelor’s degree in food science or related discipline • Preferably with 4-5 years working experience as QA/R&D in food manufacturing • Able to handle multiple projects and meet tight deadlines. • Team player with strong communication and interpersonal skills • Able to work independently with less supervision.

Right-Space Pte Ltd is looking for a smart, can-do attitude and ambitious Operation /Production Manager who inspires and deliver changes all around them. We are looking for self-starters with solid technical skills who will aggressively build the pipeline and deliver revenue.

Reporting to the Director of Sales, you will take the lead in the day-to-day management of full service studies, large component service project working with MNC clients with global project implementation.

Job Specification:

· Manage, Schedule, assign and supervise work of Operation Workforce.

· Analyse, design and improve the processes by which good and services are produced.

· Measure and improve productivity.

· Implement and manage quality assurance programs.

· Determine workload and schedules for equitable distribution of work.

· Implement and manage quality assurance programs.

· Ensure that each project is delivered on time.

· Work together with the Sales Team and Project Team to prepare quotations and action plans.

· Select and manage multiple subcontractor relationships.

· Supervise the installation and/or repair of sets or props whenever necessary.

· Interpret construction drawings/plans and prepare crew or sub-contractors.

· Respond to emergency call-outs as needed and take appropriate action.

· Perform any other duties and responsibilities as required by the Company.

Skills / Experiences

· Min Diploma Holder

· Ability to take work pressure and meet deadline

· Good Oral and Written Communication Skills

· Good Analytical Skill

· Ability to Motivate, Lead and Manage Employee

· A commitment to customer satisfaction

What we’re looking for:

Experience on test development Experience on product qualification process Familiar with ATE platform such as J750 (IGXL based) is desired Knowledge on HW design & layout on CAD tool such as Altium is preferred Candidates with program skill on C, Perl, Python, VB etc. are preferred

Skills you’ll need:

• Test development for new product attaining low cost test solution and high-test coverage for MCU, RF SOC devices
• Test/handler solution platform migration and correlation to attain low test cost and address test setup capacity constraints.
• Test time reduction.
• Perform yield analysis and contribute to test process improvements.
• Responsible for overseeing product reliability stresses as well as new package qualification stresses and test results.
• Support test solution transfer to test suppliers.

Education and/or Experience:

Bachelor’s degree in EE or EEE, with 8 years relevant experience, for advance degree holder the year of experience can be reduce

Benefits & Perks:

Not only will you be joining a highly skilled and tight-knit team where every engineer makes a significant impact on the product; we also strive for good work/life balance and to make our environment welcoming and fun.

• Medical and dental insurance coverage including spouse and child(ren)
• Bi yearly health screening and flu vaccination
• Office location is above Tai Seng MRT station

YOUR ROLE

In a context of significant growth, we seek for a talent and semiconductor/power testing passionate!

You'll join a multi-site product and test engineering team responsible for power discrete SiC (Silicon Carbide) diode portfolio. The SiC rectifier division core team is in Tours (France). For this position, you'll be based in Singapore and your role will be to support the division for the development of those high-performance rectifiers and the constant quality improvement plan: from wafers start in the flow up to the final test on diode housed into the package.

Responsibilities

• the review with local teams of the industrial changes impacting SiC diode production and participate to qualification plan definition, data analysis and milestones deliverables following quality standards and customer requirements.
• follow up all the engineering materials (technology/new product/industrial changes related) running in clean room (diffusion & EWS) to track their cycle time, to schedule the testing and the analysis, up to the disposition for back-end activities (assembly/final test trials)
• project leader for the execution of the electrical wafer sorting roadmap for SiC diodes to use the most advanced test equipment and advanced test solution.
• the analysis of electrical wafer sorting data for non-conform material and lead the board to propose most relevant disposition based on non-conform material analysis to build and sustain a data base of the either process or electrical signature and address the issues by a plan defined with a cross functional team.
• the development of statistical based routine to better detect outlier device.

The perspectives around Silicon Carbide are tremendous and will allow you to evolve in a very dynamic and fast-paced world of power devices. This job means a lot of interactions between Singapore, Tours and Catania in a multidisciplinary team.

YOUR SKILLS & EXPERIENCES

• A wide set of technical skills are required: Project management, Front end and Back end process, industrialization, electrical test, statistical analysis.
• Soft skills are key for efficiency: communication, synthesis, flexibility, team spirit, reactivity & sense of urgency, customer focus, and problem solving.

Responsibilities:

• Plan materials requirement according to production schedule and to ensure optimal inventory levels
• Monitor production schedule to meet delivery requirement
• Work closely with Testing team and arrange production staff to work according toschedule

Requirements:

• Diploma in Manufacturing/Production/Electronics Engineering
• Minimum 2 years of relevant work experience in electronics manufacturing industry
• Able to communicate and work closely with internal customers, buyer andsub-contractors
• Experience with Enterprise resource planning (ERP) system
• Team player with supervisory, interpersonal and communication skills

Working days: Monday - Friday (5 days work week)

Working hours: 8.30am - 6pm

Ivan Lee

Talents Connect

Registration No.: R24124096

EA Licence No.: 22C1201

Responsibilities

• Serve as the central technical resource / interface with design engineering, manufacturing, technical support, quality, marketing and field as the product(s) move through the Product Life Cycle
• Work to optimize serviceability, reduce cost-of-service through all stages of the PLC, and improve short- and long-term product service revenue performance
• Drive continuous improvement of system hardware, diagnostics and software, tooling, technical documentation, knowledge management, and training
• Influence early PLC designs to include features that will optimize KLA’s service business: calibrations and diagnostics, Cost of Service (CoS), reliability, design tolerances, Intellectual Property (IP) protection
• Participate in difficult beta and sustaining escalation efforts, analyze data from various sources, and work with divisional experts to provide a detailed action plan suitable for execution by Customer Service Engineer (CSE) and Technical Support Engineer (TSE)
• Leverage learning and knowledge across the Technical Support organization through training classes, scripts, coaching, documents and updating other knowledge capture tools
• Work with Learning and Knowledge Services (LKS) to determine the training requirements for new products and/or upgrades. Train the trainer and teach or co-teach initial courses. Audit service training courses to ensure their quality.
• Help to define a plan, implement and optimize the spare parts that will be stocked to support field shipments. This includes taking into account reliability, diagnostics, inventory holding cost, training level and other factors
• Perform hands-on work for integration of Alpha/Beta systems, including performing serviceability validation.
• Travel to Beta sites for support of new tool installations/upgrades, and for escalation support for new products. Travel can be up to 20%.

Requirements

• Bachelor's Level Degree or above in electrical/electronic/mechanical/optics engineering.
• Hands-on and system level troubleshooting experience in semiconductor industry are required.
• Must be able to work with wide variety of technologies, including mechanics, electronics, optics and software.
• Organized, detailed, productive, consistent, team player.
• Strong analytic and data analysis skills.
• Strong written and verbal communication skills.
• Experience with Tech Support, Product Engineer, NPI, Manufactory Design Engineer, Design Engineer is a plus.
• Experience with KLA products is a plus.
• Experience with Reliability Engineering is a plus.
• Software knowledge in Python, Visual Basic is a plus