Total 66 technical support engineer job vacancies in Manufacturing / Production category in Serangoon North Ave 5, Singapore

This role is within Package and Development Engineering (PDE) group of Micron. This is a global department with teams located in USA, Singapore, Malaysia, Taiwan, and India. As a PDPE (Package Device Product Engineer) in PDE, you will be responsible to prepare for new DRAM, NAND or MNAND products and coordinate resources, testing, and analysis over the lifecycle of the product. You will run data analysis and modelling, create, and maintain root cause analysis documentation, analyze parametric, probe level (Front End) and electrical test (Back End) data and respond to failures. In this role, you will work with various Technology Development (TD) & New Product Introduction (NPI) Engineering (Electrical Failure Analysis (EFA), Physical Failure Analysis (PFA), Assembly) and Manufacturing groups to find the root causes of the failed units.

Responsibilities and Tasks

• Enable new test signals in BE which would capture assembly related failures.
• Work with Test Solution Engineering (TSE) & Product Engineering (PE) to ensure standardize test coverages & chars. Define Char limits, and approval of any test related changes.
• Development of new out-of-control-action-plan (OCAP) and its sustenance
• Provide Lot disposition based on parametric data observation in case of out-of-control (OOC) trigger.
• Ensure that Silicon & assembly process meets Product expectations by extracting and analyzing Probe and BE test data.
• Participate in Phase Gate review meetings, presenting the data analysis and deciding on Phase Gate exits related to electrical Test data.
• Analyze test failures, coordinating EFA & PFA to identify the root cause. Implement fixes for fails (Fab process or Design or Assembly Process)
• Finding out the correlation of test failures to assembly process and updating the database with the signatures observed
• Support Global and Local material review board (MRB) in case of excursions and RMA related to package intrinsic design. This includes analyzing electrical test data for root cause analysis (RCA) and assessing the health of the contained material.

Requirements

• Bachelors/ Masters in Electronics, Device Physics, Applied Physics, Electrical
• Sound knowledge of device physics
• Knowledge in Engineering Statistics
• Experience in data (electrical) analysis and modelling (JMP, Spotfire is a plus)
• Experience in programming (Python or Perl)
• Effective communication skills in written and spoken English
• Good multitasking and organizational skills, able to make decisions in complex situations
• Excellent problem solving and analytical skills
• Experience in NAND / DRAM memory or related field
• Knowledge in semiconductor packaging assembly processes
• Experience in fabrication processes, electrical characterization techniques, metrology techniques

As a Manufacturing Engineer at MSB, you will be responsible for executing area resource plans in terms of logistics and indirect piece parts and managing, developing employee performance.

In this role some of the tasks that need to carried out include exploring continuous improvements activities to assist area management in running the production in a cost efficient and effective manner. You will need to forecast unplanned or ad-hoc staffing and training needs, monitor area performance and provide performance feedback, mentoring, and career development where appropriate.

Other responsibilities include ensuring a safe work environment by performing regular work area inspections and conducting timely event investigations. You will be working with various engineering and manufacturing groups throughout the company.

Requirements

• Bachelors / Masters in Mechanical Engineering, Mechatronics Engineering, Electrical and Electronics Engineering, Materials Engineering, Industrial & Systems Engineering, Chemical Engineering or related field.
• Has leadership experience and potential
• Strong project management, analytical skills and problem solving skills
• Possess good communication and interpersonal skills, with the ability to work effectively with multiple multi-functional teams.
• Knowledge of Semiconductor processes, engineering and/or manufacturing operations
• Background in Overall Equipment Effectiveness (OEE) and/or Lean manufacturing fundamentals will be beneficial

Keen for the role? Apply now!

Develops, implements and maintains methods, operation sequence and processes in the manufacture or fabrication of parts, components, sub assemblies and final assemblies. Interfaces with design engineering in coordinating the release of new product. Estimates manufacturing cost, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines. Maintains records and reporting systems for coordination of manufacturing operations.

• At least 5 years IT experience as Level 1 Production Operations engineer.
• Strong analytical skills: The ability to analyze production processes and identify areas for improvement and optimization.
• Technical Proficiency: Profound knowledge of production systems issues and effective solutions to enhance operation efficiency.
• Problem-Solving Aptitude: A knack for troubleshooting production issues and devising effective solutions to enhance operational efficiency.
• Experience in Data Centre facilities, including temperature and humidity monitoring system, smoke detection and fire suppression systems, Uninterrupted Power Supply (UPS) units, CCTC, keypress units, etc.
• Familiarity with AWS tools such as CloudWatch, Cloud Trail, etc. would be an advantage.
• Able to work shift duties 24X7.

• Continuous Service Improvement: Add value to Data Centre Operations by identifying improvement opportunities to sharpen Production stability, stakeholders experience and overall service quality.
• Identifying opportunities for automation within production processes to streamline operations and reduce manual intervention.
• Timely escalation and communication of major incidents such as escalation matrix, leading, driving, facilitating, and chairing all investigation activities.
• Being accountable for resolving the incident with workaround or permanent solution.
• Participate in troubleshooting system and network connectivity problems before escalation.
• Monitoring production metrics and performance indicators to ensure targets are met.
• Ensuring compliance with safety and regulatory standards in production.
• Other ad-hoc duties as instructed.

• Continuous Service Improvement: Add value to Data Centre Operations by identifying improvement opportunities to sharpen Production stability, stakeholders experience and overall service quality.

• Identifying opportunities for automation within production processes to streamline operations and reduce manual intervention.

• Timely escalation and communication of major incidents such as escalation matrix, leading, driving, facilitating, and chairing all investigation activities.

• Being accountable for resolving the incident with workaround or permanent solution.

• Participate in troubleshooting system and network connectivity problems before escalation.

• Monitoring production metrics and performance indicators to ensure targets are met.

• Ensuring compliance with safety and regulatory standards in production.

• Other ad-hoc duties as instructed.

Good years of IT experience as Level 1 Production Operations engineer.

• Strong analytical skills: The ability to analyse production processes and identify areas for improvement and optimisation.

• Technical Proficiency: Profound knowledge of production systems issues and effective solutions to enhance operation efficiency.

• Problem-Solving Aptitude: A knack for troubleshooting production issues and devising effective solutions to enhance operational efficiency.

• Experience in Data Centre facilities, including temperature and humidity monitoring system, smoke detection and fire suppression systems, Uninterrupted Power Supply (UPS) units, CCTC, keypress units, etc. • Familiarity with AWS tools such as CloudWatch, Cloud Trail, etc would be an advantage.

• Able to work shift duties. -The shift hours are as follow:

▪ 1st shift - 7:00 am to 3:00 pm

▪ 2nd shift - 2:45 pm to 10:30 pm

▪ 3rd shift - 10:15 pm to 07:15 am

o The 8-day rotational shift pattern is as below:

▪ Two days 1st shift, followed by

▪ Two days 2nd shift, followed by

▪ Two days 3rd shift, followed by

▪ Two off days.

• Familiarity with multi-tier server architecture (Application, Web, Database).
• Hands-on experience with Oracle, SQL Server, or MariaDB.
• Proficiency in web services, including protocols like SOAP & REST.
• Knowledge of system applications such as backup software, Application Server - Jboss, Web Server - Apache, Messaging system - MQ / AMQ
• Experience in CI/CD pipeline tools like Jenkins using OpenShift cloud platform

Role and Responsibility :-

• To provide quality day-to-day L2 Production support for Java/Web-based application.
• To coordinate and support infrastructure maintenance activities.
• To manage implementations of new application releases, adhering to the best practices of the release management process.
• To work with various partners such as Peer Application Teams, Infrastructure, Vendors, Security and Change teams, to provide seamless support for the business.
• To manage Production issues by responding in a timely manner in accordance to the Service Level Agreement with the Business.
• To enhance existing support process to maintain/improve service level & quality.
• At least 2 years working in an L2 Application Support Environment

Core technical competency required :-

• Linux; Unix Shell Scripting
• SQL (MYSQL/MSSQL)
• Java/Web-based
• OpenShift/Docker

Good to have experiences :-

• AngularJS
• ActiveMQ
• Elastic Search
• Application Monitoring Tools
• CI/CD (Continuous Integration & Continuous Deployment)
• Python
• Microservices concept

• Initiate product marketing and promotion activity of assigned product to expand the business regionally and globally.
• Provide technical support to get design wins for immediate opportunities and solve technical troubleshooting.
• Work with internal stakeholder, manage marketing & promotion activity by PDCA system.
• Enhance promotion activity and proactively investigate regional unique inquiry.
• Perform market research include but not limited to market analysis, capture ecosystem and identify key players & competitors.
• Collaboration project involving bundle promotion, product Q&A, product training with Regional Strategic Marketing section.

Job Requirements

• Bachelor degree in electronic and electrical engineering or other related field.
• Knowledge of electronics, device and market ecosystem, and good market analysis skills.
• Able to travel within ASEAN, India, Ocenia and Japan region.

For interested applicant, click 'apply'

EA Reg no: R1328476
EA License No: 16C8443
EA Personnel Name: Melody
EA Personnel No: R2095899

Meet the Team

As part of our team, you’ll work on groundbreaking technologies that impact the world, from products that simplify home automation and address medical issues to solutions that reduce energy waste and enable sustainable infrastructure.  You will also be supported by a team that values learning from each other and helping one another succeed.

This role will develop test strategies for ICs, including improvement of existing production test solutions. Role will also be involved in yield improvement and costs reduction while maintaining excellent product quality.

Responsibilities

• Support Test Solution Improvement for Cost Reduction, and Yield Improvement
• Support Tester or Handler platforms migration to attain low test cost and address test setup capacity constraints.
• Responsible for “Technical Product and Test Knowledge” required to guide internal team
• Provide best-in-class test program and product quality.
• Provide remote debug and technical support to offshore factory sites to resolve any Test Solution Related Issue
• Integrate test instruments or test screen from bench setup into test program.

Skills You Will Need
Minimum Qualifications:

• EE / Computer Engineering Bachelor with minimum 10 years of relevant working experience or Master Degree with reduced experience required.
• Work experience in a semiconductor preferably as a Test Engineer or Test Development
• Manufacturing/Sustaining PTE Qualification
• Strong understanding of ATE Test Programming principles, with experience in RF, Mixed-Signal or MCU testing
• Must have experience with industry standard Automated Test Equipment – Teradyne (Flex, J750) preferably, and other Mixed Signal or RF testers
• Test Program development experience & skills, including knowledge of C/C++, VB, MCU Assembly Language, PERL, Python, Scripting
• Advanced Bench Equipment Skills/ IC Application knowledge.
• PCB Hardware design knowledge & RF signal process trouble shooting skills.
• Good PCB Assembly and soldering skills
• Excellent team working ability as self-motivation, innovation, and individual contribution
• Able to mentor and provide training for internal team
• Demonstrable good project management and communication skills

Benefits & Perks:
You can look forward to the following benefits:

• Employee Stock Purchase Program (ESPP)
• Medical and dental insurance coverage including spouse and child(ren)
• Bi yearly health screening and flu vaccination
• Office location is above Tai Seng MRT station

Role Profile

This role pursues sales targets for the Company’s products and provides technical advisory for the sales team and customers.

Key Responsibilities:

Engineering

• Organize marketing activities and products demonstrations to architects, designers, developers, and contractors to showcase the features and benefits of our product
• Provide technical support and advice to product representatives, customers and contractors

Sales

• Develop and execute a sales strategy to achieve sales targets and expand customer base within the construction sector
• Identify and prospect potential customers, including contractors, and construction firms
• Provide accurate and timely quotations, negotiate contracts, and close sales deals
• Maintain strong relationships with existing customers through regular visits, follow-ups, and addressing their needs
• Raise purchase requisitions and collection of payment from customers when falling due

Competence (Knowledge, Skills and Abilities):

• Understanding and knowledge of Construction / Building / Architecture operating environment
• Skills in preparation of materials and presenting in small group settings (user demo and training, customer presentation)
• Skills in negotiation with customers and suppliers on requirements
• Skills in relating to and servicing the customers with a win-win mind set
• Skills in managing the sales process, including sales proposal, negotiation and closing the sales

Requirements:

• Strong technical knowledge of in-house products
• Able to deal with routine tasks and perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures, and direction
• Adaptable to changes, new ideas and technologies to improve processes and efficiencies

Education & Experience:

· Minimum Degree in Mechanical / Civil Engineering or its equivalent

· Minimum 3 years of sales experience preferably with building / technical product knowledge

Job Description

• Interface with Design Engineering team for the release of new products (NPI) into Manufacturing
• Involve in product development and evaluate the design for manufacturability and reliability by participating in design reviews and the assembly of the prototype units.
• Drive continuous improvement to minimize Cycle time/Quality issues.
• Perform First Article qualifications for parts and obsolescence components.
• Generate and Maintain process and equipment work instructions, drawings, and other production document to conform to specifications.
• Work with suppliers to resolve component/yield/part problems in a timely manner and assist purchasing teams in driving supplier quality improvements and cost reductions efforts.
• Provide strong technical support to production team to resolve issues and ensure on time shipment.
• Perform detailed Failure analysis on Infant Mortality parts and come up with proposal and concepts to enhance performance.
• Apply 8D troubleshooting, including driving learning and standardization to improve spare part quality.
• Create ECO (Engineering Change Orders), Structuring BOMs and creating test and assembly documentation as needed.
• Provide fly and fix support on field escalations for analysis/resolution on any issue requiring in-depth knowledge on the product.

Job Requirements

• Master’s/bachelor’s degree in mechanical engineering/Mechatronics Engineering with 2 or more years of experience in high-mix-low-volume manufacturing
• Strong mechanical engineering fundamentals, including design principles, machine elements, materials, and fabrication methods.
• Proficient with CAD, ProE/Creo/Solidworks.
• Good Understanding of the Pneumatics, Computers, controls systems and sensors involved in Electromechanical stage/Robot.
• Strong troubleshooting and analytical skills to support technical issues, set-up experiments, and perform data analysis.
• Ability to read and understand Mechanical drawings and use a variety of precision testing and measuring instruments as needed.
• Experience in semiconductor equipment industry /manufacturing is preferred.
• Team player, Self-driven, Willing to learn.
• Expected to travel up to 20% of the time.

What we’re looking for:

Experience on test development Experience on product qualification process Familiar with ATE platform such as J750 (IGXL based) is desired Knowledge on HW design & layout on CAD tool such as Altium is preferred Candidates with program skill on C, Perl, Python, VB etc. are preferred

Skills you’ll need:

• Test development for new product attaining low cost test solution and high-test coverage for MCU, RF SOC devices
• Test/handler solution platform migration and correlation to attain low test cost and address test setup capacity constraints.
• Test time reduction.
• Perform yield analysis and contribute to test process improvements.
• Responsible for overseeing product reliability stresses as well as new package qualification stresses and test results.
• Support test solution transfer to test suppliers.

Education and/or Experience:

Bachelor’s degree in EE or EEE, with 8 years relevant experience, for advance degree holder the year of experience can be reduce

Benefits & Perks:

Not only will you be joining a highly skilled and tight-knit team where every engineer makes a significant impact on the product; we also strive for good work/life balance and to make our environment welcoming and fun.

• Medical and dental insurance coverage including spouse and child(ren)
• Bi yearly health screening and flu vaccination
• Office location is above Tai Seng MRT station

YOUR ROLE

In a context of significant growth, we seek for a talent and semiconductor/power testing passionate!

You'll join a multi-site product and test engineering team responsible for power discrete SiC (Silicon Carbide) diode portfolio. The SiC rectifier division core team is in Tours (France). For this position, you'll be based in Singapore and your role will be to support the division for the development of those high-performance rectifiers and the constant quality improvement plan: from wafers start in the flow up to the final test on diode housed into the package.

Responsibilities

• the review with local teams of the industrial changes impacting SiC diode production and participate to qualification plan definition, data analysis and milestones deliverables following quality standards and customer requirements.
• follow up all the engineering materials (technology/new product/industrial changes related) running in clean room (diffusion & EWS) to track their cycle time, to schedule the testing and the analysis, up to the disposition for back-end activities (assembly/final test trials)
• project leader for the execution of the electrical wafer sorting roadmap for SiC diodes to use the most advanced test equipment and advanced test solution.
• the analysis of electrical wafer sorting data for non-conform material and lead the board to propose most relevant disposition based on non-conform material analysis to build and sustain a data base of the either process or electrical signature and address the issues by a plan defined with a cross functional team.
• the development of statistical based routine to better detect outlier device.

The perspectives around Silicon Carbide are tremendous and will allow you to evolve in a very dynamic and fast-paced world of power devices. This job means a lot of interactions between Singapore, Tours and Catania in a multidisciplinary team.

YOUR SKILLS & EXPERIENCES

• A wide set of technical skills are required: Project management, Front end and Back end process, industrialization, electrical test, statistical analysis.
• Soft skills are key for efficiency: communication, synthesis, flexibility, team spirit, reactivity & sense of urgency, customer focus, and problem solving.

Salary: 9,000 - 10,850 monthly + RSU

As part of this role, you will

• Interact with partners to understand the problems they are facing
• Design and build products for platform partners
• Collaborate globally with Sales, Implementation and Solutions engineering to ensure seamless product integration
• Evolve Wise's card and multi-currency account offerings to meet new partner needs

Responsibilities

• Serve as the central technical resource / interface with design engineering, manufacturing, technical support, quality, marketing and field as the product(s) move through the Product Life Cycle
• Work to optimize serviceability, reduce cost-of-service through all stages of the PLC, and improve short- and long-term product service revenue performance
• Drive continuous improvement of system hardware, diagnostics and software, tooling, technical documentation, knowledge management, and training
• Influence early PLC designs to include features that will optimize KLA’s service business: calibrations and diagnostics, Cost of Service (CoS), reliability, design tolerances, Intellectual Property (IP) protection
• Participate in difficult beta and sustaining escalation efforts, analyze data from various sources, and work with divisional experts to provide a detailed action plan suitable for execution by Customer Service Engineer (CSE) and Technical Support Engineer (TSE)
• Leverage learning and knowledge across the Technical Support organization through training classes, scripts, coaching, documents and updating other knowledge capture tools
• Work with Learning and Knowledge Services (LKS) to determine the training requirements for new products and/or upgrades. Train the trainer and teach or co-teach initial courses. Audit service training courses to ensure their quality.
• Help to define a plan, implement and optimize the spare parts that will be stocked to support field shipments. This includes taking into account reliability, diagnostics, inventory holding cost, training level and other factors
• Perform hands-on work for integration of Alpha/Beta systems, including performing serviceability validation.
• Travel to Beta sites for support of new tool installations/upgrades, and for escalation support for new products. Travel can be up to 20%.

Requirements

• Bachelor's Level Degree or above in electrical/electronic/mechanical/optics engineering.
• Hands-on and system level troubleshooting experience in semiconductor industry are required.
• Must be able to work with wide variety of technologies, including mechanics, electronics, optics and software.
• Organized, detailed, productive, consistent, team player.
• Strong analytic and data analysis skills.
• Strong written and verbal communication skills.
• Experience with Tech Support, Product Engineer, NPI, Manufactory Design Engineer, Design Engineer is a plus.
• Experience with KLA products is a plus.
• Experience with Reliability Engineering is a plus.
• Software knowledge in Python, Visual Basic is a plus

Job Description

• Accountable for all technical and quality issues which are related to assigned electron optics subassemblies.
• To handle daily production escalation. Provide strong technical support to production team to resolve issues and ensure system meeting shipment schedule as planned.
• Dispose non-conformance products and closely work out with supplier on the quality and process continuous improvement.
• Response to failure analysis and provide comprehensive analysis report to field support team or customers. Provide and implement the corrective action to fix the problem in systematic way.
• Work with material team on the product cost reduction, EOL component replacement, relocation of manufacturing site, and any engineering support needed from them.
• Writing ECO on any product change and ensure ECO implemented properly.
• Answerable to supplier quality and OOBQ yield. Audit supplier’s process and quality control if necessary.

Job Requirements

• PhD/Master’s/Bachelor’s Degree in electron Optics/Mechanical engineering / System Engineering or equivalent
• Knowledge in high-vacuum systems and experience in high voltage electronics
• Preferred experience in electron optics system including hardware handling experience, such as electron source, column and objective lens
• Ability to work in a clean room environment.

Job Description

• Interface with Design Engineering team for the release of new products (NPI) into Manufacturing
• Involve in product development and evaluate the design for manufacturability and reliability by participating in design reviews and the assembly of the prototype units.
• Drive continuous improvement to minimize Cycle time/Quality issues.
• Perform First Article qualifications for parts and obsolescence components.
• Generate and Maintain process and equipment work instructions, drawings, and other production document to conform to specifications.
• Work with suppliers to resolve component/yield/part problems in a timely manner and assist purchasing teams in driving supplier quality improvements and cost reductions efforts.
• Provide strong technical support to production team to resolve issues and ensure on time shipment.
• Perform detailed Failure analysis on Infant Mortality parts and come up with proposal and concepts to enhance performance.
• Apply 8D troubleshooting, including driving learning and standardization to improve spare part quality.
• Create ECO (Engineering Change Orders), Structuring BOMs and creating test and assembly documentation as needed.
• Provide fly and fix support on field escalations for analysis/resolution on any issue requiring in-depth knowledge on the product.

Job Requirements

• Master’s/bachelor’s degree in mechanical engineering/Mechatronics Engineering with 2 or more years of experience in high-mix-low-volume manufacturing
• Strong mechanical engineering fundamentals, including design principles, machine elements, materials, and fabrication methods.
• Proficient with CAD, ProE/Creo/Solidworks.
• Good Understanding of the Pneumatics, Computers, controls systems and sensors involved in Electromechanical stage/Robot.
• Strong troubleshooting and analytical skills to support technical issues, set-up experiments, and perform data analysis.
• Ability to read and understand Mechanical drawings and use a variety of precision testing and measuring instruments as needed.
• Experience in semiconductor equipment industry /manufacturing is preferred.
• Team player, Self-driven, Willing to learn.
• Expected to travel up to 20% of the time.

UnaBiz is the leading IOT company in Singapore. HQ in Singapore, with officea in Taiwan, Japan, France, Spain and providing IOT solution globally.

Join the company that supplies solutions to established local and MNC.

UnaBiz offers a workplace environment that values creative problem-solving, open communication and a flat hierarchy.

Objectives of this role

• Developing new tech solutions according to requirements.
• Testing products to ensure they meet performance and quality standards.
• Improving and updating existing product solutions.
• Working closely with other teams to ensure that the product design is efficient and smooth.

Your responsibilities

• Work with product managers to develop product roadmaps and timelines.
• Collaborate with other engineers and designers to solve complex technical problems.
• Develop and implement testing procedures and product prototypes.
• Provide technical support to customers and other team members as needed.
• Stay updated with industry trends and implement changes in the systems accordingly.

Required skills and qualifications

• Bachelor’s degree in software engineering or a related field.
• 3+ years of experience in product engineering or a related role.
• Knowledge of product development processes, including ideation, design and testing.
• Experience with PCB design and firmware writing.
• Strong attention to detail with a creative eye for solving complex problems.

Preferred skills and qualifications

• Advanced degree or certificates in engineering or a related field.
• Familiarity with project management tools and techniques.
• Understanding of regulatory requirements for product development.
• Ability to communicate and collaborate with other teams to explain product designs.
• Passion for innovation and creating new products that solve real-world problems.

Benefits

1. Compensation commensurate with experience and skill

2. Activities to build company culture of camaderie

3. Free transportation to/fro office and home / Free lunch

4. Tai Seng / 5 days per week

• Remuneration Package: Up to $3,300 + Fixed Allowances of $1,100 
• Location: Jurong Island (Company Transport Provided at Designated Points) 
• Shift Job: 12 Hours, Rotating AM and PM Shifts 

Are you a fresh graduate with a degree in Chemical Engineering? Ready to jumpstart your career in a dynamic and cutting-edge environment? Join our client, a reputable chemical manufacturing company, where you will work with the latest manufacturing technology and advanced engineering control systems. Lead a team of skilled technicians and ensure smooth and safe plant operations while gaining invaluable experience in process optimization and quality conformance.

Responsibilities:

• Lead and Oversee: Guide a team of Production Technicians to ensure the safe and efficient running of production processes.
• Support Process Engineering: Assist the Process Engineer in conducting activities and projects to optimize operations and achieve cost efficiency.
• Troubleshoot and Resolve Issues: Address plant, equipment, and quality issues promptly and recommend effective countermeasures.
• Maintain Equipment Integrity: Monitor plant equipment to ensure reliability and integrity.
• Optimize Operations: Support shift operations by providing optimal operating conditions for stable plant performance and high product quality.
• Train and Develop: Mentor and develop team members to enhance their skills and performance.

Requirements:

• Educational Background: Degree in Chemical Engineering or equivalent.
• Technical Skills: Knowledge of process control, troubleshooting, plant equipment, and instrumentation.
• Key Attributes: Strong analytical and technical report writing skills, leadership qualities, initiative, drive, commitment, ability to handle pressure, and excellent communication skills.

If you are ready to embark on an exciting career journey and make a significant impact in the chemical industry, we want to hear from you!

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

Responsibilities:·

• Solve complex system integration issues on an optical wafer/component inspection tool· Develop product specifications based on system requirement
• Involve in product development through release and will be expected to champion his/her technical solution
• Provide feedback on design changes by working closely with Development Engineering teams (M.E., E.E., and S/W Eng.) and creating ECO and documentation as needed
• Provide fix support on field escalations for analysis/resolution on any issue requiring in-depth design know-how on the product and support beta testing at customer sites
• Reviewing marketing requirements, develop system critical design specifications and design test methods

Requirements:·

• Master’s/Bachelor’s Degree in Mechanical/Mechatronics/Electrical Engineering or related fields with 3 or more years of experience in Design/System Engineering
• Ability to read technical drawings, understand BOMs, and use a variety of precision testing and measuring Instruments
• Must possess strong troubleshooting and analytical skills to support technical issues, set-up experiments, and perform data analysis
• In-depth understanding of optical, mechanical, electrical, and software components involved in the design and development of optical-based, semiconductor inspection equipment or equivalent is a plus
• Expected to travel up to 10% of the time where applicable

Manufacturing Engineer

We are looking for experienced full-time Manufacturing Engineer to provide technical support and advice to Manufacturing Technicians on new programs and/or ongoing program enhancements. Develop and conduct tests to enhance manufacturing processes, monitor and compile test data, perform problem solving and provide technical support to resolve technical issues.

Roles and Responsibilities:

• Build new Manufacturing Job Instruction Sheets (JIS), NC program, and Tool/Gauge plan with Siemens NX.
• Establish manufacturing procedures and proper documentation control.
• Initiate productivity improvement activities including equipment/fixture selection, design and deployment.
• Resolve technical issues relating to internal and external customers' feedback.
• Perform feasibility studies in the manufacturing capacity improvement, layout improvements and expansion.
• Initiate continuous improvement activities to existing manufacturing system and its related processes.
• Participate actively in company-wide productivity and quality programs.
• Put up justification for capital expenditure (CAPEX).

Qualification and skills:

• Diploma in an Engineering discipline with at least 2 years of relevant working experiences.
• Strong understanding and hands on with precision machining tool (CNC 5-Axis / lathe / milling etc.).
• Team player and able to work closely with other teams on cross-functional projects.
• Competent in Unigraphics and/or other CAD/CAM applications.
• Good analytical, communication and interpersonal related skills.
• Working location: East, Singapore

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

• Develop test plan and work with designer on Design for Test.
• Develop test programs and design test hardware for new products; the solutions must be affordable and yield
  high test coverage.
• Support Product Qualification Process
• Support bench validation and characterization.
• Support test platforms migration to in house test platform to attain low test cost and address test setup
  capacity constraints.
• Perform yield analysis and contribute to test process improvements.
• Provide remote debug and technical support to offshore factory sites.
• Available for business travel upon request.
• Other duties may be required.

• 3 to 6 years of experiences. Perform work in shifts to provide 24/7 on-site or on-call support
• To support linux/Java/MariaDb applications.
• Incident and Problem management
• Should have knowledge on SRE. Best practices and able to adhere to SRE guidelines in the work.
• Provide root cause analysis techniques to determine cause and resolve complex system issues.
• Perform post-resolution follow-ups to ensure problems have been adequately resolved.
• Communicate application problems and issues to key stakeholders, including management, development teams, end users, and unit leaders.
• Work with onsite and offshore teams across multiple technologies/applications
• Continuous improvement of the system, eq. removal of TOIL, job automation, performance tuning.
• Proactive management of production services by measuring and monitoring availability, latency, throughput, user journeys and overall system health.

Kindly take note of the following details for shift work

1. Allowance should be included in the monthly hiring rate.
2. Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)
3. Shift Timing
   1. Morning shift 6am to 3pm
   2. General shift 9am to 6pm.
   3. Afternoon shift 2pm to 11pm
   4. Night shift 10pm to 7am.
4. Need to support including night shift, weekends and public holidays

Job Summary

The purpose of the position is to improve and support products within Video Solutions in Cartrack. The role requires the incumbent to fully understand Video products, their functionality, and processes. This includes the (linux based) server and database setup, the camera hardware, firmware and, to a limited extent the product front end/website functionality.

The incumbent will be expected to liaise with various teams, locally and internationally - development, sales and support to ensure the current products function as expected while identifying gaps in the current offering.

The incumbent will deal with local and international suppliers to integrate, support and improve existing products. New products will be evaluated and business cases for their integration, and the coordination of integration will be required.

Responsibility

● Product Development

o Collect data from stakeholders and collate product requirements

o Prioritize requirements and manage development backlog

o Review and investigate feasibility of new products

o Follow documentation best practice

● Global Support

o Assist with rollout of new video products globally.

o Assist with testing and integration of new video products and features globally.

o Train and assist global teams to allow them to fully utilize and support clients on the Video products.

o Assist staff with escalated calls and queries that relate to Video Solutions.

o Communicate new features or products to staff and ensure thorough coaching that they are competent to assist clients.

● Technical Assistance

o Investigate returned/faulty devices to find root-cause, identify trends and improve.

Requirements

● Relevant Qualification / Certificate in a technical field (BTech Mechatronics, Electronic/Industrial/Computer Engineering or similar)

● 5 years’ experience in development/technical role

● Programming experience (Essential)

● Understanding of Electronic Principles (Essential)

● Understanding of Systems Engineering process (Advantageous)

● Knowledge of Camera Systems (Advantageous)

● Good communication skills

● Strong analytical and problem-solving ability

● High level of attention to detail

● Driver’s License

Responsibilities:

• Monitoring applications and infrastructure alerts.
• Recommending and implementing solutions to mitigate potential production issues.
• Taking ownership, responding to incident tickets, and closing open incident tickets by adhering to service level agreements.

Requirements:

• Minimum 1 year of experience in an application support role.
• Proficiency in Unix commands, Shell scripting, and SQL queries.
• Knowledge of Job scheduling, Kafka, and ActiveMQ is a plus.
• Exposure to the banking industry is advantageous.
• Dynamic individual with a thirst for learning.
• Strong team player with excellent interpersonal skills.
• Ownership-oriented with the ability to meet SLAs without compromising on work quality.

Junior/Freshers also welcome to apply.

• Perm and comfortable to work at Jurong Island
• Must have strong L2 technical support experience within manufacturing industry
• Have managed manufacturing site control room system and troubleshoot hardware issues.
• Proven strong experience in network & server experience with CCNA certification

The Site IT Engineer provides specialized support to IT Administrators and contractors within the assigned region, offering expert advice and resolving complex issues related to PC's, laptops, servers, Microsoft Office, collaboration tools, security, and networks.

Job Description

• Provide L1 and L2 technical support for up to 200 users, ensuring timely communication regarding progress, issues, and improvements.
• Resolve computer software and hardware problems in accordance with Group IT policies and standards, emphasizing root cause analysis and knowledge sharing to prevent rework.
• Maintain and support network and regional systems for process automation and local databases, addressing needs such as safety incident registration and compliance.
• Drive improvement of IT systems and processes, contributing creative and innovative ideas to site management.
• Lead on-site end-to-end projects within the region, ranging from infrastructure upgrades to core service changes, with varying complexity and duration.
• Represent multiple sites and offices, attending meetings, reporting findings, and implementing solutions independently.

• Degree
• Familiar with cyber security principles and best practices
• Must have strong L2 technical support experience within manufacturing industry
• Have managed manufacturing site control room system and troubleshoot hardware issues
• Proven strong experience in network & server experience with CCNA certification
• Certificates:
• Microsoft Fundamentals (eg. Azure Fundamentals or M365 Fundamentals);
• ITIL v4 Foundations;
• Cisco CCNA
• Show interest in and be aware of latest trends in IT.
• Fluent business English and local-language speaker.
• Comfortable to work in a multi cultural environment with IT contacts all over the region.
• Team player

Triton AI Pte Ltd
Registration Number: R1980724
EA: 21C0661

• Perm
• AWS
• Bouns
• Medical & Insurance Coverage
• Flexi Benefits