Total 138 Quality Assurance / Control job vacancies in D27 Yishun, Sembawang

- Able to lead, manage & motivate a team of Female QC Inspector & Packers

- Assist in own department's manpower planning and deployment

- Assist in ensuring smooth running of departments operations of shift on duty

- Ensure effective implementation of working procedure in QC department

- Ensure efficient and effective communications inter and intra departments

- Look for customer complaint information

- Monitor and improve production yield (in term of inspection, unjig & smoothness of QC flow)

- work with production to ensure that customer delivery schedules and quality standard are met

Responsibilities:

• Work with stakeholders to ensure the QMS is accurate and adhere to in relation to New Products, Prototype, or first few pilot machines, especially for AP (Advance Packaging) areas.
• Responsible for reviewing product BOM structure and drawings, process flow charts of entire supply chain from vendor to post shipment servicing, design reviews and validation plans.
• Manage first article inspection (FAI), and closely monitor parts quality at initial lots, before released for mass production.
• Works with production and engineering to develop an effective measurement metrology (MSOP), improve in-process inspection and measurement, be it at part level, module level or machine level. Get the whole list of part MSOP ready before hand over to mass production team.
• Assure acceptance and methodologies are fully documented with appropriate test coverage, such that product inspection / validation / testing is properly performed, including develop, maintain and revise validation / test requirements.
• Actively participating in design reviews activities and provide input for new product development.
• Develop PPAP, incoming control plan for critical purchasing parts that are “Critical to Quality CTQ” and “Critical to Function CTF”, by ensuring form, fit, function and cosmetic requirement in part, module, and machine level.
• Actively use 3P principles (Protect, Prevent, Predict) to drive for root cause analysis and CAPA using tools such as 8D, 5Why, FTA, MBPS, etc. Prepare lesson learnt to cascade to other relevant products and be the owner of centralized product QE and/or customer QE.
• Work closely with internal customers to ensure production reject DPPM and cycle time is at satisfactory level.
• Work closely with Field Service Team to collect field feedback. For customer complaints, facilitate related stakeholders to output the Root Cause, Corrective Actions and Preventive Actions.
• Apply statistical method for data analysis with tool like Minitab.
• Responsible to ensure zero customer complaint from NPI/Pilot builds, and be the focal person in driving problem solving end-to-end.
• Upkeep quality KPI such as total customer detractor rate (TCDR), opportunity cost (eOPR), scrap cost etc in accordance to organization metric especially for AP Advance Packaging areas.

Requirements:

• Candidate must possess at least a Bachelor's Degree in Mechanical/Electronic/Manufacturing Engineering or equivalent.
• At least 3-5 year(s) of working experience with direct involvement in manufacturing and product development setting in the semiconductor equipment maker industry.
• Possess good and effective communication skill with all levels with the organization, supplier and customers.
• Able to implement and carry-out improvement opportunities to identify profits and increase productivity.
• Strong technical knowledge, hands on with product, process.
• Experienced in the application of quality tools essential to new product development such as DFMEA, PFMEA and Quality Control Plans, end-to-end yield, panther chart, 8D, Six Sigma, DMAIC etc.
• Hands on using statistical analysis and tool such as Minitab etc.
• Effectively bilingual

Responsibilities:

• To operate CNC milling and turning (3 axis & 5 axis)
• Able to scheduling machined parts to customers in time
• General duties

Requirements:

• Minimum Diploma in Mechanical Engineering or Degree in Mechanical Engineering
• At least 5 years of working experience
• Ability to multi-task and possessed initiative
• Able to start work immediately

Friendly working environment

Company Details:

SUPERFIX (SINGAPORE) PTE LTD

5, Yishun Industrial Street 1,

North Spring Bizhub, #07-08,

Singapore 768161

Tel: 6748 2122

Fax: 6747 9838

Interested applicants, please email your resume to [email protected]

To provide quality, diligent and friendly services to all our customers. The Pest Control Technician are to work independently to conduct inspections at clients' premises for potential pest infestations and perform pest control tasks such as fogging, misting and baiting. Good customer service skill is required as there is a need to explain problems to clients and shares solutions with them.

To perform General Pest Management, Anti Termite Soil Treatment & etc.

To keep good records of hours worked, chemicals used, and payment collected

To follow detailed instructions in applying pesticide to avoid harm to the client and self

Must possess physical stamina and be able to work in harsh conditions

Must possess good customer service skills and be customer focused

Must have good time and process management skills

Must be trustworthy

Must be very knowledgeable about a wide variety of pests, and be up-to-date with current industrial practice.

Main Duties and Responsibilities:

- Maintain the document control and support documentation-related work in Quality Assurance Department. This include tasks such as electronic application, scanning, filing, archiving and retrieval of documents.

- Ensure administrative database and system are kept up-to-date.

- Support to prepare documentation to customers related to product content environmental enquiries such as RoHS, REACH and other substances of concern.

- Review and prepare monthly submission of samples for ICP test.

- Routine review of SPC and control limits including update to relevant system.

- Support Engineer to consolidate test result and prepare basic test report for customers.

- Any other duties that commensurate with this role.

Skills and Requirements:

- O-Level or O-Level Equivalent

- Administrative experience preferred

- Proficient in Computer and Microsoft Office (Excel, Word, Powerpoint)

- Detail-oriented

Quality Assurance Manager

Job Responsibilities:

Quality Assurance

· Establishment, Maintenance and Continuous Improvement of Company’s Quality Management System (QMS), Class Approvals (Marine) and Regulatory Requirements (Part 145).

· Plan, organise and take lead to drive Quality initiatives and promote quality culture within the company.

· Maintaining and continually improving quality performance, to meet the maintained or all Divisions.

· Perform all essential audits and inspecting internally and/or by third party or client as and when required.

· Establishment, implementation and co-ordination of the audit & approval program, reporting of audit outcomes and ensuring follow up of corrective actions.

· Assist department to follow up on root cause analysis and creation of appropriate action plan to prevent recurrence of issues, by providing training and guidance to the team whenever required.

· Conduct incident investigation and prepare concise investigation reports with in accordance to the regulatory requirement.

· Training and development of employees with respect to QMS and its related processes, quality principles, tools and techniques etc.

· Ensure all licensing at Singapore site and products/services are managed for new applications and renewals.

· Budget allocation and control of costs for QMS related projects; resource management; training; third party audit and Certification costs; and professional subscription costs.

• Effectively implements quality procedures for all allocated sites, in line with legislation, regulatory and guidelines. Documents and maintains the register of quality approvals, procedures and accreditations for allocated sites / geographies.

• Communicates to all allocated sites quality procedures, ensuring all relevant regional colleagues are aware of their responsibilities in supporting / upholding Quality Assurance processes.

• Manages operational, technical, health, safety and environmental audits in line with the audit calendar

• Participates in quality, non-conformance and complaint investigations, ensuring findings are documented, reported and escalated appropriately. Monitors and follows up on supplier CAPA and improvement actions

• Contributes to statistical analyses on which to base recommendations for improvement

• Advises business leaders and senior managers of compliance issues or matters requiring supplier quality development or improvement

• Any ad-hoc duties or projects as assigned.

Skills

• Makes sense of complex, high quantity, and sometimes contradictory information to effectively solve problems

• Gains the confidence and trust of others through honesty, integrity, and authenticity

• Develops and delivers multi-mode communications that convey a clear understanding of the unique needs of different audiences

• Knows the most effective and efficient processes to get things done, with a focus on continuous improvement

• Anticipates and balances the needs of multiple stakeholders

• Uses compelling arguments to gain the support and commitment of others

• Interprets and applies key financial indicators to make better business decisions.

• Plans and prioritises work to meet commitments aligned with goals.

• Operates effectively, even when things are not certain, or the way forward is not clear

• Knows the most effective and efficient processes to get things done, with a focus on continuous improvement

• Builds partnerships and works collaboratively with others to meet shared objectives

Job Requirements:

· Degree in Engineering or Quality Assurance or equivalent with at least 5 years of relevant managerial experience in marine, aviation or related Industry.

· Certified ISO9001:2015 internal/lead auditor qualification.

· Successful completion of the CAAS M10/L11/L12 Examination.

· Able to interpret CMM, in particular IPL (illustrated part listing) and special equipment and tooling listing will have added advantage.

· Preferably have experience in liaising with OEM for capability expansion.

· Certification or experience in Lean, Kaizen and 5S or familiar with common quality tools and techniques.

· Knowledge of relevant standards, and the ability to become conversant with the rules and regulations relating to the quality systems specific to the marine, defence and aviation industries;

· Experience in practical administration, maintenance and development of Quality Management Systems.

· Knowledge of the practical implementation and development of Continuous Improvement and Lean or other similar methodology in a manufacturing, engineering and/or supply chain environment.

· Good leadership and proven managerial skills to be able to lead and motivate the team.

· Meticulous, resourceful, team player and possess strong organization skills.

· Internet savvy and proficient in MS Office applications (ie. Outlook, Excel, Words and Powerpoint etc)

· Effective oral and written communication and interpersonal skills.

· The ability to plan and prioritize work and work under high pressure to tight deadlines yet flexible and adaptable to changing needs and situations.

About the Job:

We are looking for a QA Engineer to join our growing system test team. You are a self starter who has a passion for delivering quality products, better user experience and for providing new ideas to make testing more efficient through automation. You understand the need to deliver robust product against the need to deliver fast.

Responsibilities:

· Oversee and participate in HW/SW design validations, testing and documentations to ensure product meets internal Quality requirements.

· Work closely with the HW/SW development teams to ensure consistency in product enhancements and ultimately meeting product shipment quality.

· Participate as part of the project agile sprint team to qualify the sprint release and participate the software quality phase to deliver high quality product release.

· Develop and implement a test plan / test cases to ensure product quality goals are met.

· Develop, review and lead test automation activities.

· Assisting Project Manager to consolidate and generate final system test plan report and status tracking.

· Maintain strong teamwork skills and active contributor to team effectiveness.

· Maintain strong verbal and written communication skills.

Basic Qualifications:

· Degree in Electrical/Electronic Engineering, Computer Science, Computer Engineering, or related discipline

· Minimum of 4-6 years’ experience in system level testing

· Experience in software quality assurance and agile testing.

· Certification in well-known software quality assurance standard is welcome.

Desired Qualifications:

· Working knowledge of Manufacturing test industry is highly regarded.

· Hands-on user experience with In-circuit testers.

JOB DESCRIPTION

• Ensure proper usage and calibration of measuring equipment
• Managing customers' request and complaints (KIS)
• Compiling Raw Material Inspection/Certificate report
• Handle Audits from customers and ISO certification bodies
• Document Control of whole Quality and Engineering system
• Setup and maintain and generate Quality Management System procedures and processes
• Archive project documentations (technology cookbook, include control plan, FMEA etc )

REQUIREMENT

1. At least Diploma in any field
2. 3 or more years of relevant experience
3. ISO audit experience
4. Good working knowledge of Microsoft Excel.

RESPONSIBILITIES

1. To support the Director of Nursing in leading Quality projects and other complex projects :

· Lead Quality Projects

· Kick start in tracking and collection of relevant date for analysis

· Ability to churn out charts and progress reports in accordance with the data collected

· Ability to analyse complex scenarios and provide suggestions/solutions

2. To support the Nursing Department in all administrative functions such as:

· Filing

· Co-ordination of incoming and outgoing emails/ mails

· Monitoring stationary usage, transport request

· Raising purchase requisition

3. To assist in the administrative aspects of maintenance of ward equipment, including liaising with internal departments (Purchasing, Facilities, etc) to get matters resolved

4. To support Nursing by participating in the various activities organised by Singapore Christian Home

5. To assist in administrative preparation for events, meetings, workshops which is under the Nursing Department. (Preparation of materials, refreshments, food, etc)

6. To participate and render support in corporate events and activities

7. To support entries into the ECCareSuite system

REQUIREMENTS

- GCE O/ N Levels

- Certificate in Office Skills

- Preferably with 2 years of relevant working experience

Role:

The Supplier Quality Associate Engineer is responsible for inspection of new part, and advance inspection planning for NPI projects. He / She is also the interface between the internal factories globally in terms of material quality. The incumbent is required to work closely with supplier quality engineers in Asia and Europe.

Responsibilities:

• First article, Incoming inspection on mechanical and electrical parts
• Support R&D for prototype inspection
• Internal calibration for gages, jigs, and fixture
• CMM programming for new parts
• GOM or other optical inspection for prototype parts
• Supplier Source Audit
• Assist Engineer in non-conformance management.
• Training intern
• Ensure supplier uses the right equipment for inspection.
• Other admin work related to supplier quality that include purchase request

Requirements:

• Degree/Diploma (with relevant experience), preferably Mechanical / Electrical engineering
• Minimum of 2 years of similar experience in original equipment manufacturer / contract manufacturing.
• CMM Programming skill, preferably Zeiss
• Drawing knowledge preferably Advanced Geometrical Dimension and Tolerancing knowledge
• Preferably inspection knowledge on PCBA, cable and other electrical parts
• Able to travel to supplier in Singapore and Johor Bahru in Malaysia
• Calibration process knowledge

Responsibilities:

1. Review project proposals or plan to determine timeframe, funding limitations, procedures for accomplishing projects, staffing requirements and allotment of available resources to various phases of the project.
2. Allocate resources and confer with project, service, operations, sales & finance staff to outline project schedule and assign duties, responsibilities and scope of authority.
3. Ensure the company’s and project related Quality Assurance objectives are met.
4. Identify and mitigate project risks, ensuring contingency plans are in place to address potential issues.
5. Negotiate and manage contracts and agreements with vendors, suppliers, and subcontractors.
6. Coordinate with cross-functional teams to ensure smooth project execution and resolution of any issues that arise.
7. Develop and maintain project documentation, including project plans, status reports, and closing reports.
8. Continuously improve project management processes and procedures to enhance efficiency and reduce costs.
9. Meet the travel request about 50%

Requirements:

1. Bachelor's degree，Minimum of 5 years of experience in project management
2. Proficient in project management tools and techniques
3. Strong leadership and team management skills, with the ability to motivate and direct teams effectively.
4. Exceptional communication and negotiation skills, with the ability to interact with diverse stakeholders.
5. Ability to handle multiple projects simultaneously and prioritize tasks effectively.
6. Attention to detail and strong analytical skills, with a focus on quality and results.

Job Description:

• To carry out Structural and Welding inspection and test of fabrication material / work including documentation.
• Prepare Inspection Test Plan (ITP) for main-con / consultant.
• Verify all incoming materials and products as per requirement
• Inspection at vendors shop facilities and work-sites, on fabricated steels, steels structure, blasting, painting works, galvanizing or other installation works per BSEN and AWS codes, including verification of tests at their premises.
• Prepare and compile inspection reports, non-conformance reports and other quality control documents.
• Ensure the deliverables of projects meet clients quality and safety requirements
• Evaluate quality and safety non-conformance report and provide corrective measures

Requirement:

• Minimum 2 years in Inspection & QC of Construction for Structural Steel
• Sound knowledge of WPS preparation and conduct WQT for welder
• Good communication and presentation skill
• Good interpersonal skills
• Good working knowledge in all Singapore and international codes and standards on related fields
• Ability to lead and instil team spirit in work.
• Certified Welding Inspector or Equivalent is an added advantage

DESCRIPTION OF JOB TASK AND RESPONSIBILITIES:

· Direct report to Quality Manager

· Work closely with Quality Manager

· Perform Quality Inspection in accordance with the Performance Assessment Worksheet

· Tracking and ensuring inspection done and action taken as per contract requirement

· Taking down reports on Inspection, communicate/explain findings – Updating Quality Manager

· Proper documentation control

· Perform IDIQ project inspections.

· Other duties assigned.

BASIC JOB QUALIFICATIONS

· Must have adequate English communication skill (oral and writing).

· General knowledge on Building and Facility Maintenance and Repair

· Computer literate – Excel and Word

· Practical knowledge on Building Construction

· Basic Experience on Air Conditioning, electrical operations & any other M&E related is a plus

· Takes initiative and able to work independently.

· Must have Class 3 driver’s license.

- Junior position

Ugene Lab is the premier food testing laboratory. We provide customers with a broad range of microbiological and chemical testing, rapid testing, hygiene monitoring and specialized test methods developed to meet customer needs.

Responsibilities:

• Implement, maintain and improve the quality management system (ISO 17025).
• Drive quality improvements and proactive participation in continuous improvement.
• Handle all assessments by accreditation bodies and audits by clients.
• Manage internal audits across management system and laboratory.
• Monitor laboratory test equipment for calibration.
• Ensure corrective and preventive actions identified are implemented and verified in a timely manner.
• Manage external and internal proficiency testing programs and prepare compliance and improvement metrics as required.

Requirments:

• Bachelor's Degree in Science or Engineering.
• Minimum 2 years experience in managing quality management systems within testing, inspection or certification environment.
• Demonstrate experience auditing against ISO/IEC 17025.
• Sound knowledge of equipment calibration and analyzing proficiency test data.

Senior Control Engineer (PLC & HMI)

Key Responsibilities:

- Lead project to ensure design meet project specifications.

- Generate process flow chart and software specifications.

- PLC and HMI program development, modularization, and standardization.

- PLC and HMI setup and programming.

- Conduct factory acceptance test and site acceptance test.

- Conduct internal and end-user operation and maintenance training.

- Update design progress to department head.

- Create internal written knowledge transfer material.

- Create operation manual for machines designed.

- Ensure given tasks complete within given timeline.

- Provide technical support and solutions to sales inquiry.

- Generate proposal, costing and tender documents for sales inquiry.

- Liaise with suppliers on components selection and quotation.

- Liaise with customers on control design and process flow.

- Troubleshoot electrical design and software issues.

- Perform system maintenance and support for system in production.

- Train, supervise and guide Control Engineer.

Requirements:

- Minimum Diploma in Mechatronics, Automation Engineering, or equivalent.

- Minimum 3 years of automation system PLC and HMI programming experience.

- Proficient in Omron Sysmac Studio and Microsoft Office.

- Proficient in PLC programming language: Functional Block Diagram (FBD), Structured Text (ST) and Ladder Diagram (LD).

- Experience in using communication protocols such as OPC UA, Ethernet/IP, Modbus TCP/IP, RFID interface, Profibus, Device Net.

- Proven ability to complete tasks given independently.

- Demonstrate strong problem-solving skill.

- Capable to perform under tight schedule to meet project timeline.

- Industrial robot programming experience will be added advantage.

OVERALL PURPOSE OF JOB :

• Responsible in ensuring products quality meet customer’s requirements and liaison with vendor on matters related to quality. Monitor and maintain monitoring and measuring equipments in the company to ensure periodic calibration / verification is conducted.

MAIN ACTIVITIES/ TASKS:

• Liaise and work with vendor on matters pertaining for quality for quality improvements.
• Involvement in process improvements as and when required.
• Ensure that products are inspected on time to ensure on time delivery to customers.
• Ensure that company’s monitoring and measuring equipments are sent for calibration timely.
• Generate incoming and delivery yield report.
• File and maintain all quality records systematically.
• Carry out 5S activities daily.
• Assist and carry out assignment assigned by Operation Manager / Superior as and when required.

WORKING REQUIREMENTS:

• Minimum NTC 2 or equivalent with minimum 2 years relevant experience.
• Knowledge in interpreting mechanical drawings.
• Computer literate.
• Possess ability to communicate and write in English and Malay.
• Ability to use the measuring and test equipments / tools.
• Possess some knowledge in basic QC tools.
• Possessed self driven positive attitude.
• Ability to work independently.

• Implement the QA/QC management system at site
• Coordinate with quality inspections with all the site sub contractors and vendors coordinate all non destructive testing on site
• Coordinate with the customers representative on all quality matters
• Coordinate all receipt inspections
• Distribute relevant QA/QC documentation to site subcontractors
• Verify that the quality related site activities are in accordance with the applicable codes and standards
• Participate in the site internal and external site audits
• Coordinate all the quality site inspections through the site QC inspectors
• Ensure all quality control documentation is complied and competed for as-built hand over through the QC turnover engineer
• Control all nonconformance reports and undertake remedial action
• Compete site quality control instructions and action remedial responses
• Review the customers specification and undertake relevant training to the site QC inspector
• Monitor the implementation of the approved site QC Plan
• Complete and coordinate the approval of the sites QC technical submittals to the customer
• Coordinate with the site construction manager on all quality issues Coordinate and chair the QA/QC site weekly meetings with the projects subcontractors QC personnel
• Elaborating inspection and test programs
• Ensure the safety is adhered to at site
• Assure all technical documents relative to site quality control are current status

Job description

• Ensure compliance of operations with Workplace Safety and Health Regulations and Statutory requirements especially NEA.

• Conduct regular site checks and to take appropriate corrective actions.

• Identify environmental issues and recommend measures to rectify the irregularities.

• Provide recommendations for improvement periodically on environmental issues in line with Statutory requirements.

• Exercise control in enforcing compliances to legal requirement and in-house rules.

• Responsible for the execution of various monitoring programmes.

• To provide monthly report on ECO system operation and performance.

• To ensure that work practices in projects are at all times in line with legal and 3rd party audit requirement, that is, WSH, ISO, GGBS, ConSASS and Bizsafe.

• Ensure the effective implementation of risk assessments, and follow up actions to maintain high safety standard and compliance to company policy and legal requirement.

• To conduct regular inspection to ensure that the measures are at all times in place and complaints related.

• Perform other ECO-related duties as assigned by Reporting Manager.

Job Requirements:

Registered ECO

• Good working knowledge of environmental policies, legislation, guidelines and standards and best practices.
• Ability to conduct inspections and audits to produce thorough, readable, and informative reports.
• Ability to manage public communication and complaints.
• Ability to compile and maintain documentation in an organized manner.

JOB RESPONSIBILITIES:

• Establish and ensure functionality of the QA&QC Department
• Setup HACCP and ISO 22000 requirements for production plant
• Handle regulatory and customer Audits
• Ensure compliance with legal regulations and Food Safety Management Systems
• Ensure products meet internal / external specifications
• Monitor incoming, in-process and outgoing inspection activities
• Handle customer feedback pertaining to quality and food safety issues
• Ensure adherence to Quality and Food Safety Management Programmes
• Handle and decide on disposition of non-conforming products
• Manage, motivate, coach and develop the Food Safety and QA&QC teams
• Any ad-hoc work as prescribed by the superior.
• Reporting to Deputy General Manager.

JOB REQUIREMENTS:

• Diploma / Bachelor’s Degree in Food Science, food manufacturing or related field.
• Minimum 3 years of leadership experiences;
• Prior QA/QC experience in food manufacturing will be added advantage;
• Good Knowledge of Quality Management Systems (HACCP, BRC, ISO 22000)
• Good Communication, Organizational and Analytical Skills
• Meticulous, good judgement and decision-making skills.

Woodlands 家私厂聘请家私木工

头手/中工多位

工作时间 ：

星期一至星期六 ， 9am - 6pm

星期天公共假期休息

加班一天可以至少3小时以上

有兴趣安排面试的求职者,星期一到星期五早上九点至下午五点打電話跟我們联系:

Ms Tan

6262 1559

Job Description

Reagent QC Technician 1 (RQCT 1) is responsible for executing operational activities including setting up and maintenance of equipment in compliance with cGMP, quality & safety requirements to achieve operational objectives. This role encompasses a broad spectrum of analytical, molecular, and biochemical techniques to evaluate product quality. RQCT 1 is also required to assist in incident investigation and engineering study.

Position Responsibilities:

• Complete required training (e.g. cGMP, safety and work instructions, etc.) within a stipulated time frame
• Ensure proper housekeeping and maintain cleanliness (6S) of the working area.
• Execute tasks strictly following cGMP, Quality, Safety and Work instruction requirements
• Ensure employees follow safety, quality requirement, and all applicable company policies at all times
• Timely report/ escalate any concerns (work-related or personal)
• Able to take on additional tasks or responsibilities when required
• Primary reviewer of batch records for final product release
• Perform daily QC routine tasks (e.g. QC sample collection) under broad guidance
• Conduct analytical, molecular and biochemical analysis for intermediate and final products (reagent samples) under broad guidance
• Prepare reagent samples using basic laboratory equipment in accordance with Work Instruction (WI) under broad guidance
• Able to test prepared reagent samples using different laboratory analytical instruments in accordance with Work Instruction (WI) under broad guidance
• Generate and analyze test results (example: Chromatogram) in accordance with Work Instruction (WI) under broad guidance
• Ensure accurate data generation and entry of records into Manufacturing Execution System (MES) or Laboratory Information Management System (LIMS) under broad guidance
• Perform regular maintenance / inspection of measuring devices and equipment for accuracy under broad guidance
• Perform peer verification to ensure test / inspection process follow Work Instruction (WI) under broad guidance
• Perform basic troubleshooting of common issues and investigation of reagent sample failure (Out of Specification) to determine the root cause and perform immediate corrective actions with some supervision
• Prepare, qualify and track oligos and standards to ensure sufficient and non-expired inventory for sample analysis under broad guidance
• Prepare chemical stock solutions and reagents for analysis under broad guidance
• Ensure inventory records of all control and consumable are updated under broad guidance
• Responsible in procurement, purchasing duties according to inventory records under broad guidance
• Partner with new technician on QC testing processes defined in work instruction(s)
• Improvement work:Participate in process improvement to enhance manufacturing/QC process capabilities in area such as quality and efficiency under broad guidance
  Assist in non-production activities such as engineering studies, NCR investigation runs, validation / PPQ runs under broad guidance
• Participate in incident investigation

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements:

• Good understanding of GDP and cGMP, knowledge of ISO and MDSAP requirements preferred
• Complete tasks in a safe and efficient manner
• High level of discipline and integrity
• Able to undergo job rotation/cross training
• Able to work in noisy environment with appropriate personal protection equipment (PPE)
• Able to work in chemical environment with appropriate personal protection equipment (PPE)
• Must be able to identify different colors for work purposes. In Illumina, we handle components/chemicals with different colors, and it is necessary to be able to differentiate and identify the correct components/chemicals (using visual) during operation.
• Proficient with basic weighing and pipetting skill
• Familiar with basic laboratory procedures. Relevant experience with laboratory testing, QC of molecular-biology-based assays will be an advantage
• Possess a positive attitude and sense of urgency
• Meticulous, keen attention to details and organized.
• Good analytical skills
• The candidate must be able to work 12 hours (from 0800 to 2015 for the day shift and from 2000 to 0815 for the night shift) rotating shifts with staggered break times in accordance with the roster
• Team player and possess effective interpersonal and communication skills.
• Able to lift 15kg or less of heavy weight safely.

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Fresh graduate with Diploma in Science (preferably Chemistry or Biology), Chemical Process Technology or related Life Science or Technology.
• Minimum 1 years of operations experience for Secondary School / ‘O’ Level / NTC / NITEC/ Diploma / Non-Science or Non-Engineering Degree or equivalent.
• Hands on experience in sample preparation using basic laboratory equipment such as micropipettes, incubator and mini-centrifuge; Chromatogram analysis for liquid samples preferred
• Hands-on experience and good micro-pipetting skills/techniques using Single channel and/or Multichannel micro-pipettes, including reverse pipetting technique preferred
• Knowledge in handling and preparation of reagents (including enzymes or proteins) preferred
• Experience in ISO 13485, MDSAP, and GMP controlled manufacturing/production environment preferred
• QC experience in a manufacturing environment preferred
• Relevant experience in a manufacturing environment working with standard production control tools – LIMS, MES, ERP, inventory control, work orders preferred

Job Responsibilities

• Carry out credit check activity according to Company’s Credit process, recording outcomes accurately and in a timely manner

• Manages and resolves customer disputes to ensure invoices are paid on time and in full

• Locates and monitors overdue accounts, using computers and a variety of automated systems

• Persuades customers to pay amounts due, arranging debt repayment schedules as per authority level and based on customers' financial situations, agreeing extension to credit terms within own authority level or escalating as needed

• Records information about financial status of customers and status of collection efforts

• Sorts and files correspondence and perform miscellaneous clerical duties, such as answering correspondence, writing reports and maintaining system data

• Locates and notifies customers of delinquent accounts by mail or telephone, as per specified process identifying the reason(s) for any overdue payment and to review / confirm the terms of sales, credit or service agreements

• Identifies and answers customer questions regarding problems with their accounts and advise customers of necessary actions and strategies for debt repayment

• Manages own workload ensuring all performance measures and SLAs are met

• This list is not exhaustive; other duties may be required, as assigned by manager.

Job Requirements:

· Degree in Accounting/Finance/Business or related disciplines with minimum 2 years of experience in credit control or related experience.

· Outstanding attention to detail with an ability to reconcile complex account.

· Proven experience of managing multi-currency sales ledgers.

· Proven record of delivering effective credit control, with minimal supervision, whilst adhering to strict deadlines.

· Ability to proactively resolve day-to-day operational issues and to effect process improvements.

· Dynamic, positive attitute with an interest to provide high quality of service to internal and external customers.

· High level IT capabilities including Microsoft Office, in particular Excel and PowerPoint.

· Ability to meet deadlines through good time management and allocation of priorities.

Job Description

You will play a crucial role in leading the design, development, and deployment of the strategic procurement related compliance programs, processes, and initiatives across the global organization. You will work closely with cross-functional teams including Global Sourcing, legal, compliance, QA, IT and data management to ensure we have a ‘One Agilent’ program in place. This role requires a deep understanding of regulatory compliance, quality management and audit and supply chain management.

Key Responsibilities:

• Leads the design, development, management and execution of strategic compliance programs and initiatives aligned with legal requirements, industry standards and organizational objectives. (e.g RoHS, responsible minerals, modern slavery)
• Acts as a “Process Champion”, consultant and recognized expert to the management team on strategic procurement processes, methodologies and strategies.
• Maintains a broad knowledge of major industry best practices and stay informed about the industry specific regulations and standards, identify and close the process gaps to ensure the organization complies with all relevant laws and regulation.
• Identifies opportunities and drive for continuous improvement initiatives for the organization to enhance efficiency and improve productivity.
• Develop and manage process documentation, policies and training.
• Leading the internal/external QMS, process and compliance audit for the organization.

Qualifications

• Bachelor’s degree in relevant field preferably in Engineering or Quality.
• Minimum of 8 years of experience in procurement, quality, compliance management, audit or regulatory affairs.
• Excellent problem solving and critical thinking skills.
• Strong project management skills and ability to handle multiple tasks simultaneously.
• Excellent communication skills and ability to work collaboratively in a team
• Strong understanding of QMS (ISO9001/13485), regulatory compliance, including knowledge and of relevant laws and regulations in the industry.
• Hands on working experience on FDA, IVDR and MDSAP will be and added advantage.

• Basic up to $6,000
• 5 days work: 8.30 am – 5.45 pm
• AWS + Bonus + Excellent Benefits + Career Progression!
• Location: Senako North

Job Responsibilities

• Maintaining the Quality & Environment Management System,Food Safety Management System according to ISO9001, ISO14001, FSSC22000, Kosher, RSPO, Sedex, ISCC etc.
• Ensuring Compliance to regulatory and above certifications, as well as attending to all related CB and customers' audits.
• Conduct periodic Internal audit and Vendor audit.
• Liaison with Sales team regarding customers' complaints & questionnaires
• SFA Hygiene Officer & Food Safety Team Leader.
• RSPO & Kosher coordinator.

Job Requirements

• Bachelor's Degree in Food Science / Food Technology or other Science or related disciplines
• Obtained Food Safety Course Level 3 certification.
• Any QA related assessor certificate or certified QMS Auditor / Lead Auditor in ISO or equivalent will be advantageous.
• Minimum 3 years’ experience in QA related field.
• Good knowledge in GMP, HACCP, RSPO, ISO 22000, ISO 9001, ISO 14001, ISO 45001 and Food Safety is preferable.
• Strong interpersonal and communication skills with the ability to work cross-functionally with different departments.

For consideration, kindly submit your CV by clicking “APPLY NOW”

*Only shortlisted candidates will be notified**

EA Personnel No: R23118342
EA License No: 15C7752

Job Summary :

To assist Quality Manager in Quality System Management, Customer Quality Management, Product Quality Management, Supplier Quality Management, Quality Supervisor / QC Assistant people management

Job Duties & Responsibilities :

• System certification
• In-process manufacturing audit
• Supplier management
• Documentation and control
• Calibration and GR&R control
• APQP new product first article run and report
• Monitoring and manage incoming, in-process and outgoing performance
• Handling of customer complaint
• Parts approval submission (PPAP)
• IMDS submission (International Material Data Sheet)
• Conduct evaluation run study
• Monitor cost of quality
• Plan and conduct layout inspection
• Manage quality control plan, FMEA & process flow diagram
• SPC study
• Product safety (UL, RoHS, REACH) monitoring
• Other duties assigned as & when required.

Qualification, Experience & Skills :

• Diploma or Degree
• Technical knowledge/industrial working experience
• Quality tool & computer knowledge