Responsibilities:

• Organize & conduct EHS kick off meeting prior vessel arrival
• To assist Engineer (EHS) & Manager (EHS) in the implementation, review and improvement of yard’s Safety Management System to maintain a safe and healthy working environment in the yard and project.
• Assist SRM/PM to monitor & control inherent hazards prior work commencement
• Perform hotwork & hazardous works certification
• Assist SRM to organize VSCC meeting (Acts as Secretary)
• Maintain project EHS related record
• Coordinate the PTW system implementation
• Coordinate confined space attendants’ deployment
• Coordinate fire watchmen deployment
• Update vessel safety coordination board
• Coordinate & inspect fire fighting & rescue equipment deployed on vessels
• Drive the implementation of project EHS plan
• Drive the implementation of project accident prevention activities
• Drive the implementation of project risk management
• Investigate accident/incident & near misses
• Undertake performance appraisal of CSAs
• To enforce on compliance of all HSE related legislations.
• To assist the Engineer (EHS) & Manager (EHS) in establishing responsibility levels for hot work Assessor and confine space Assessor
• Undertake other tasks as directed by the Engineer (EHS) & Manager (EHS)

Requirements:

• Diploma/Degree related to EHS or any Engineering fields
• Possess Hotwork Assessor Certification & Confined Space Assessor Certification are added advantage
• Good understanding of Workplace Safety & Health Act & Shipbuilding & Ship Repairs regulation
• Good report writing & incident investigation & analytical skills
• Possess strong leadership & interpersonal skill
• Proficient in MS Office for reporting and presentation purpose

Other Information:

• Location: Tuas (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am to 5.00pm

Addcel are looking for Senior Project Engineer who has experience in Project Implementation for Mechanical works especially Piping, Structural Steel and Tankage works. Follow through the whole project lifecycle from estimation, tendering, detail engineering to project management and implementation.

Responsibilities:

• Estimation and MTO
• Tendering & Proposal
• Value and Detailed Engineering
• Drafting using AutoCAD
• Project Planning, Documentation and Support
• Capture project progress and additional/ change orders
• Others as and when required by the management.

Requirement:

• Min. 2 - 5 years of relevant working experiences
• Min. Degree in engineering or equivalent
• Excellent skill in MS Office

• Effective leadership of all operational staff in Singapore including efficient manpower planning, ensuring technical competence of staff and monitoring of technical performance.
• Leading change and development within the SD function to meet future business demands to improve Lloyd's Register's competitive position.
• Ensuring that structures, processes, and procedures are coordinated and effective in meeting the business/commercial requirements for both internal and external clients.
• Liaising with SD counterparts to ensure consistency in development and delivery of services and application of best practices.
• Ensuring external and internal client expectations are understood and that the services offered meet these expectations and remain in accordance with technical, regulatory requirements and processes.
• Ensuring excellent service to internal and external customers in accordance with established quality standards and in compliance with the requirements of the Group Management System.
• Dealing with business queries and build relationships with internal and external clients, as appropriate, to resolve service problems and build the business.
• Mentoring and coaching team members, as appropriate, to achieve effective knowledge transfer and application.
• Delivery of operational financial performance against agreed targets.
• Delivery of non-financial performance against established metrics and targets.

Roles & Responsibilities

· To perform field support activities both in Company premises as well as on site, I.e. to perform engineering work such as dismantling, maintenance, repair, overhaul & installation works.

· In the course of work, he must ensure his work adheres to the required security, safety & quality standards in the company. He needs to co-ordinate job activities to consistently meet timeline, customer job requirements and statutory regulations. And, to prepare service reports upon completion of jobs.

· Secondary appointment is to perform collection and delivery of goods from and to the Customers’ locations, physical check of collected and delivered platforms, liaising with customers and other tasks as and when required by his Supervisor.

• Others ad-hoc duties as assigned

Requirements:

· Able to read and understand English

· Able to use basic hand tools, power tools, production equipment related to assembly trade such as torque wrench & lifting equipment

· Able to operate basic workshop equipment like drilling, welding, grinding

· Must be open to commit for OT

· Class 3 Driver’s License is an advantage

The School of Mechanical and Aerospace Engineering (MAE) at NTU Singapore is a top 11 Mechanical and Aerospace Engineering School in the world. With well-established industry partnerships, MAE provides an active and vibrant research environment with excellent R&D infrastructure and numerous opportunities for research funding. The school has an enrolment of over 2500 undergraduate students with over 90 faculty members and 140 full-time research staff working in well-equipped state-of-the-art laboratories. A growing research student population of over 400 is also actively engaged in strategic research and development work.

We invite highly qualified candidates in the relevant expertise areas to join our dynamic team of faculty.

Surface Engineering, Metrology, Precision Engineering

Candidate Profile:

• Possess relevant Bachelor and PhD degrees from reputable universities.
• A good research track record, and postdoctoral experience would be advantageous.
• Teaching experience at either undergraduate or graduate levels will be an advantage.
• Research intersects the multidisciplinary field of Surface Engineering, Metrology, and Precision Engineering.
• Expertise in Advanced Surface Engineering, Surface Metrology, Surface Science and Characterization
• And/or Expertise in Advanced Engineering Metrology, Mechanical Metrology, Dynamic Metrology.
• And/or Expertise in Advanced Precision Engineering, Precision Metrology, Precision Optical Systems.
• And/or Expertise in Translational research work with Industry on AI/ML applications.
• Successful candidates are expected to teach at both undergraduate and graduate levels, supervise graduate students and undergraduate projects. Candidates on tenure-track are expected to conduct high impact research and acquire competitive research grant and funding to sustain an active research portfolio.

We Provide:

• An active and vibrant research environment
• Excellent R&D infrastructure and opportunities for research funding
• Well-equipped state-of-the-art laboratories
• Attractive research start-up grants and PhD student scholarships
• A competitive remuneration package and attractive benefits

Roles & Responsibilities

PG Engineering Pte Ltd is looking for a competent Project Engineer for process and construction & industrial projects in island wide. The project engineer is responsible for and required to be the core interface with the Team in support of our Client, and to ensure the highest level of service to our Client. The project engineer will oversee, monitor and coordinate the project to ensure it is completed on or before time, to budget and to the specified quality standards and coordinate with project managers.

From our Singapore office we currently provide a range of project management services to International Corporations and Government entities including the following:

• Strategic Project Definition and Advisory Services;

• Client Representative Services;

• Due Diligence studies;

• Cost and Budget;

• Planning and Programme Management;

• Project Management;

• Design Management;

• Procurement Management;

• Construction Management;

* Management handling with upgrade;

* Management control c/w procurement and overall projects team;

Job Responsibilities:

The role involves the execution of duties to the highest possible standards. Your primary responsibility will be to lead and perform all of the activities necessary to plan, procure, manage and administer all issues related to power & construction and industrial site work.

Your duties will involve working closely with project staff and contractors across multiple technical disciplines requiring the supervision of numerous simultaneous tasks to meet very specific and immovable milestones. You will be privy to confidential information by necessity.

You will treat all such information with the highest levels of confidentiality and will perform your role with integrity and honour at all times.

It is expected that the Project engineer role will require, but not be limited to the following key functions:

• Planning/Scheduling

• Implement a high-level effective project management framework and method statement, incorporating necessary review processes as required

• Review the master programme and other reports to ensure timeline is met

• Secure resources, suppliers, product for the Client as required

• Monitor the design, construction, and dismantling programme and identify opportunities for improved delivery

• Risk Management

• Proactively identify potential problems, conflicts, design and delivery issues using risk management tools and skills to mitigate impact on the project

• Identify Health and Safety issues and to report as per procedure

• Site, Oversee the effective operation of the activities related to the P&C Contracts through conducting regular site visits and quality checks

• People, Manage and direct the P&C team to provide overall superintendence and ensure that the project team staff, contractors, etc., work well and provide a supportive environment for the achievement of the project

• Holding weekly staff meeting with P&C team, monitoring and reviewing staff working hours and writing performance reviews for P&C staff

• Contract Management • Negotiate and convert contracts as required by the project

• Oversee the award of contracts and ensure the client is adequately protected

• Scheduling, minuting and issuing various project meetings and ensure minutes are actioned in a timely manner

• Provide regular and accurate reporting on the project progress, costs and quality

• Review and oversee the management of all P&C contracts and ensure that there are no major gaps or issues in providing the required P&C deliverables

• Monitoring and reviewing all P&C work instructions and variations ensuring that all information is accurate, recorded and follows the designated project approval process

• Manage and document changes/variations following approval by Client • Ensure contractors and consultants are paid in accordance with contract schedules

• Review any procurement requirements and provide all necessary P&C technical support to the procurement process • Client Management

• Take the leading role in interfacing with the Client and contractors on all P&C matters at all project stages

• Actively seek and implement strategies to improve the client’s position in regard to return and value

• Identity and resolve disputes quickly and reasonably

• Develop and maintain excellent relationships with Client, authorities, consultants, contractors and adjoining property owners/stakeholders

• Reporting

• Monitoring, reviewing and implementing appropriate document control processes in line with quality control procedures

• Preparing monthly status report input on all P&C activities and including a detailed analysis of power consumption and utilization

And any other work-related tasks or duties deemed required and assigned by the line manager.

Job Requirements:

• Electrical & Mechanical Engineering qualification with minimum 6 -10 years relevant experience

• Master Degree in Electrical / Mechanical systems in the relevant field in the process & construction industry

• Contract administration experience

• Excellent overall knowledge of most P&C systems, Knowledge in innovative components introduce and handling.

• Knowledge in electrical power distribution, Smart DB’s, PLC / SCADA programming

• Experience working in construction & industrial design firms

• Manage and coordinate the inputs of project stakeholders to ensure the successful delivery of the project

• Assess and resolve site planning and coordination issues

• Apply quality management principles and processes

• Possess a keen eye on detail to deliver the highest quality of standard

• Apply risk assessment and management principles and processes

• A capacity to communicate professionally and confidently with a diverse range of people at all levels

• Strong written communication skills, with a demonstrated ability to draft reports, minutes, correspondence, procedures, processes and forms

• Sound literacy in computer software, including the Microsoft Office range. Excellent knowledge of Word and Excel • Ability to read technical drawings

• Ability to work with limited supervision

• Flexibility and ability to work with different areas of the business Punctuality with attendance and with delivering tasks on time.

Project Manager (Maintenance & Consturction)

Occupation Manager, Project (process & Construction)

Job Description & Requirements

PG Engineering Pte Ltd is looking for a competent Project Manager cum Manager (P&C Manager) for Process & Construction and industrial projects in island wide. The project manager is responsible for and required to be the core interface with the Team in support of our Client, and to ensure the highest level of service to our Client. The project manager will oversee, monitor and coordinate the project to ensure it is completed on or before time, to budget and to the specified quality standards.

From our Singapore office we currently provide a range of project management services to International Corporations and Government entities including the following:

• Strategic Project Definition and Advisory Services to maintenance & projects

• Client Representative Services;

• Due Diligence studies;

• Cost and Budget;

• Planning and Programme Management;

• Project Management;

• Design Management;

• Procurement Management;

• Construction Management;

* Management handling with upgrade;

* Management control c/w procurement and overall projects team;

Job Responsibilities:

The role involves the execution of duties to the highest possible standards. Your primary responsibility will be to lead and perform all of the activities necessary to plan, procure, manage and administer all issues related to power & construction and industrial site work.

Your duties will involve working closely with project staff and contractors across multiple technical disciplines requiring the supervision of numerous simultaneous tasks to meet very specific and immovable milestones. You will be privy to confidential information by necessity.

You will treat all such information with the highest levels of confidentiality and will perform your role with integrity and honour at all times.

It is expected that the P&C Manager’s role will require, but not be limited to the following key functions:

• Planning/Scheduling

• Implement a high-level effective project management framework and method statement, incorporating necessary review processes as required

• Review the master programme and other reports to ensure timeline is met

• Secure resources, suppliers, product for the Client as required

• Monitor the design, construction, and dismantling programme and identify opportunities for improved delivery

• Risk Management

• Proactively identify potential problems, conflicts, design and delivery issues using risk management tools and skills to mitigate impact on the project

• Identify Health and Safety issues and to report as per procedure

• Site, Oversee the effective operation of the activities related to the P&C Contracts through conducting regular site visits and quality checks

• People, Manage and direct the P&C team to provide overall superintendence and ensure that the project team staff, contractors, etc., work well and provide a supportive environment for the achievement of the project

• Holding weekly staff meeting with P&C team, monitoring and reviewing staff working hours and writing performance reviews for P&C staff

• Contract Management • Negotiate and convert contracts as required by the project

• Oversee the award of contracts and ensure the client is adequately protected

• Scheduling, minuting and issuing various project meetings and ensure minutes are actioned in a timely manner

• Provide regular and accurate reporting on the project progress, costs and quality

• Review and oversee the management of all P&C contracts and ensure that there are no major gaps or issues in providing the required P&C deliverables

• Monitoring and reviewing all P&C work instructions and variations ensuring that all information is accurate, recorded and follows the designated project approval process

• Manage and document changes/variations following approval by Client • Ensure contractors and consultants are paid in accordance with contract schedules

• Review any procurement requirements and provide all necessary P&C technical support to the procurement process • Client Management

• Take the leading role in interfacing with the Client and contractors on all P&C matters at all project stages

• Actively seek and implement strategies to improve the client’s position in regard to return and value

• Identity and resolve disputes quickly and reasonably

• Develop and maintain excellent relationships with Client, authorities, consultants, contractors and adjoining property owners/stakeholders

• Reporting

• Monitoring, reviewing and implementing appropriate document control processes in line with quality control procedures

• Preparing monthly status report input on all P&C activities and including a detailed analysis of power consumption and utilization

And any other work-related tasks or duties deemed required and assigned by the line manager.

Job Requirements:

• Electrical / Mechanical Engineering qualification with minimum 10 -15 years relevant experience

• Master Degree in Electrical / Mechanical systems in the relevant field in the power & construction industry

• Minimum 10 years’ project management experience, including minimum of 5 years’ experience in Singapore.

• Contract administration experience

• Excellent overall knowledge of most P&C systems, Knowledge in innovative components introduce and handling.

• Knowledge in electrical power distribution, Smart DB’s, PLC / SCADA programming

• Experience working in construction & industrial design firms

• Manage and coordinate the inputs of project stakeholders to ensure the successful delivery of the project

• Assess and resolve site planning and coordination issues

• Apply quality management principles and processes

• Possess a keen eye on detail to deliver the highest quality of standard

• Apply risk assessment and management principles and processes

• A capacity to communicate professionally and confidently with a diverse range of people at all levels

• Strong written communication skills, with a demonstrated ability to draft reports, minutes, correspondence, procedures, processes and forms

• Sound literacy in computer software, including the Microsoft Office range. Excellent knowledge of Word and Excel • Ability to read technical drawings

• Ability to work with limited supervision

• Flexibility and ability to work with different areas of the business Punctuality with attendance and with delivering tasks on time.

Job Requirements

1) To work as supporting Process Design Engineer to Project Lead Process Design Engineer

2) To co-ordinate with Process Designer to Prepare PFD & P&IDs

3) Perform Hydraulic calculations, surge analysis, Wastewater calculation, Firefighting calculation

4) Perform Tank Venting Calculation as per API 2000

5) Perform TRV and PSV Sizing Calculation as per API 520 & API 521

6) Prepare Tank Operating Level Calculation

7) Prepare Heat & Material Balance

8) Perform Heat Transfer Calculations

9) Prepare Material Selection Diagram

10) Prepare Process Line List, Product Data sheet

11) Participate in HAZOP / SIL Study and close out HAZOP / SIL Action sheets

12) Prepare Design Basis & System Description

13) Prepare Pollution control report and Fire safety report

14) Perform Tank emission calculation

15) Prepare Process data sheets for Equipments like pumps, Heat Exchangers, Refrigeration unit, Flare, Boilers, Oil Water Separators, Vessels

16) Prepare Process data sheets for Instruments like control valves, MOVs, Pneumatic actuators, Level Transmitters, Pressure Transmitters, Temperature Transmitters, Flow meters etc.

17) Prepare Process Control Philosophy & ESD Philosophy

18) Prepare Cause & Effect Diagram

19) Prepare Commissioning Procedure & Operation Manual

20) Review Vendor Documents for Process related information

21) Review Plot Plan, Piping Layout, Instrument Data Sheet, Equipment Data Sheets for Process related information as Inter Discipline Check

22) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

23) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word, MS Power Point

3) Smart Plant P&ID

4) Autocad

Code Knowledge

1) API 2000, API 520, API 521, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Qualification

Bachelor of Engineering (Chemical)

Experience

4 years to 7 years

* Only Shortlisted Candidates Would Be Notified.

Job Responsibilities:

• Knowledge in understanding the Schematic Diagram.
• Report to the production manager regarding of the progression.
• Performing the electrical wiring, termination, installation as per drawing for control panel, instruments and machine.
• Troubleshooting, testing and commissioning (electrical part).
• 1 - 3 years of relevant working experience in handling the forklift.
• Preferably to have experience in electrical , shipyard, oil and gas and petrochemical
• Able to work independently and proactively and work under fast pace environment.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Our dedication to excellence and our strong track record have earned us a distinctive reputation for quality and trust as an integrated engineering group, spanning across the aerospace, smart city, defence and public security segments.

Collaboration is key to our success. We prioritize open communication, constructive feedback, and a willingness to help others. We are committed to creating a supportive work environment that encourages excellence, innovation, and continuous improvement. We're looking for individuals who share our values and are excited to join us on our cyber mission.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

Job Description:

• Responsible for the creation, organization, execution, completion, and maintenance of projects
• Manage scope and quality in alignment with stakeholders and manage risks and issues along the entire lifecycle and help the team remove blockers and solve problems
• Effectively communicate and manage stakeholder expectations and provide status information regularly
• Drive detailed technical discussions and manage the team to deliver a successful implementation
• Provide effective leadership to the team in solving problems, cultivate team cohesiveness & teamwork
• Manage projects that will involve development (hardware, firmware, software) and production
• Overseeing the entire project so that all required documentation is complete

Job Requirements:

• 3+ years of project management experience
• Experience in product development and/or software development
• Familiar with network infrastructure
• Strong management skills, including coaching, team-building, and conflict resolution
• Excellent interpersonal and communication skills
• Results-oriented mindset to achieve and exceed project goals.
• Project management certification like PMP or equivalent
• ITIL and CISSP is an added advantage
• Passion to learn and able to follow processes
• Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Highlights:

Location: 45 Gul Road (Daily Company Transport pickup nearby MRT: Bukit Batok/Jurong East/Boon Lay/Choa Chu Kang/Woodlands)

Working Hours: 5 days work week; Monday to Friday: 8am to 5.30pm

Duration: Permanent

Benefits: OT pay entitlement / Medical Benefits such as Outpatient,Dental,Healthscreening etc / Variable Bonuses / Company Insurances such as Personal Accident, Life Term, Surgical, Hospitalizations, Work Injury / Annual Leave / Birthday Leave / NTUC Membership

Industry: Dyna Mac is a Public Listed company in Oil&Gas, Marine Offshore Engineering.

**Good Stable Career Advancement Opportunities**

**Listed Company with Good Benefits**

**Company Transport Available**

Job Description:

• Process invoices received from suppliers and process payments
• Update invoice listing and prepare accrual listing
• Perform monthly supplier’s reconciliation
• Perform bank reconciliation
• Prepare invoice to client
• Prepare backcharge invoice subcontractors and update COR register
• Other ad-hoc duties as assigned

Job Requirement:

• Degree / Diploma in Accounting or A levels with working experience.
• At least 3 to 5 years of accounting experience.
• Meticulous, positive mindset and possess "Can-do" attitude.
• Hardworking, meticulous and able to take on ad-hoc tasks from time to time.
• Experience in Marine/Shipyard or Construction industry is advantageous (but NOT a must).

• Provide driving service in/out of workshop
• To shift vehicles in and out of workshop for repair and services after registration at counter
• To send vehicle to LTA inspection
• To arrange and park vehicle properly and orderly in docking area
• To conduct road test for vehicle as required
• To assist in handling/taking over of courtesy vehicle
• To assist in checking courtesy vehicle status
• To assist in collection and sending vehicles outside workshop
• To ensure docking area tidiness and cleanliness
• To assist Service Department with adhoc trips such as collection of payment/spares
• To assist in washing/cleaning of Service Department courtest vehicle

Requirements

• Class 3 & 4 Driving License

Job Description

• Manage Day to day operations
• Monitor system performance, troubleshoot issues, and implement necessary fixes or enhancements.
• Conduct regular system health checks and capacity planning to anticipate and address potential bottlenecks.
• Implement security best practices and ensure compliance with industry standards.
• Collaborate with vendors and technical support teams to resolve complex technical issues.
• Document system configurations, processes, and procedures for knowledge sharing and future reference.
• Improves operations by conducting systems analysis and recommending changes in policies and procedures.
• Protects operations by keeping information confidential and secure.
• Provides information by collecting, analyzing, and summarizing development and service issues.
• Accomplishes engineering and organization mission by completing related resultsas needed
• Perform scheduled maintenance and prepare maintenance documentation including preventive maintenance checklists, work instructions and reports
• Weekly 3 days Site Visit
• Supervise Site activites
• Experienced in civil works

Responsibilities

• Desktop support
• Provide basic support and troubleshooting to our staffs, such as password resets, printer configurations, break/fix instructions, support routing and escalation to L2 support.
• Taking ownership of staffs issues reported and tracking them through resolution
• Responding in a timely manner to service issues and requests
• Liaise with third party vendors to coordinate issues on specific services.
• Liaise with product manufacturers for problem escalation and resolutionYou will be responsible for the end-user’s hard and software related issues as well as our corporate information systems.

Requirements

• Higher Nitec or Diploma in Computer Science/Information Technology.
• Good knowledge on computer networks.
• Strong analytical and problem-solving skills.
• Good understanding and possess troubleshooting know-how on IT infrastructure and software.
• Able to handle sensitive information in confidential manner.
• At least 2 years of IT related working experience.

About our Company:

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Supervise construction works, maintain quality control and ensure that the works are carried out in accordance with the project specifications, design intent, approved drawings and site instructions by the supervising qualified persons
• Ensure that site personnel carry out their work in compliance with the prevailing regulations set up by the building authorities and government agencies of Singapore
• Perform tests to check the quality of materials
• Review project drawings and specifications, and raise any discrepancies and/or potential problems to the appointed Qualified Person and relevant stakeholders
• Attend meeting with qualified persons and relevant stakeholders
• Prepare progress reports
• Work under the control and direction of the appointed Qualified Person(s) when carried out his/her duties for the assigned project
• Any other duties as assigned from time to time

Prerequisites

• Diploma/Degree in Civil & Structural Engineering
• Accredited as a C&S Resident Technical Officer (RTO) by Institution of Engineering Singapore (IES) or Association of Consulting Engineers Singapore (ACES)
• Certificate in BCSS (Building Construction Safety Supervision) or other similar construction-safety certification
• Minimum 2 years of experience as a Resident Technical Officer (RTO)
• Able to read and interpret architectural drawings and details of construction projects
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

Administration Assistant

1. Register Data entry to a computerized system
2. General administration (answering phone calls, receiving of parcels, filing, etc.
3. Track stocks of office supplies and place orders when necessary
4. Supports team by performing tasks related to organization and strong communication.
5. Contributes to team effort by accomplishing related results as needed.
6. Provides administrative support to ensure efficient operation of office.
7. Write letters and emails on behalf of other office staff
8. Resolve administrative problems, and implement improvements to make them more efficient
9. Attention to detail and problem-solving skills
10. Tracking and coordinating all activities under an account
11. Providing after-sales support to clients: invoicing, preparing reports, handling complaints and resolving any issues that arise

Requirements:

• Able to start work on short notice preferred
• Overtime may be required. Candidates who are able to work overtime will be preferred.
• Able to work independently with minimum supervision.
• Secondary diploma or equivalent education required
• Knowledge of appropriate software including: Microsoft Word, Excel, and Outlook, Microsoft PowerPoint
• Good command of English. writing & speaking

Please email your resume to [email protected]

1. Responsible to lead and motivate teams in a project to meet delivery timeline, optimize cost efficiency and meet customer specifications.
2. Update and manage schedules of assigned projects with accurate data for manager to compile and have time factory capacity utilization.
3. Feedback on workflow issues to manager in order to enhance efficiency and productivity.
4. Provide improvement reports for manager to compile and review.
5. Manage all change orders or deviations expected/ unexpected.
6. And any other job as assigned by the Management from time to time.
7. Monitor all construction documentations and able to retrieve accurate information
8. Review detailed drawings, and provide technical advice on practical design and construction.
9. Prepare required engineering reports, documents, and drawings to the relevant authorities for approval.
10. Familiar with AutoCad drawing

DUTIES AND RESPONSIBILITIES

• Developing and implementing supply chain strategies, policies and procedures to optimize efficiency, reduce costs, and improve overall performance.
• Managing the procurement process.
• Sourcing suppliers, negotiating contracts, quotation comparison and ensuring timely delivery of goods and services.
• Monitoring inventory levels to ensure optimal stock levels while minimizing carrying costs.
• Weekly updates, annual stock-taking, forecasting, coordinating with suppliers and other department to ensure timely replenishment and implementing inventory control measures.
• Overseeing the movement of goods, ensuring efficient transportation, warehousing, and distribution processes.
• Collaborating with sales and marketing teams to understand market demand, analyze historical data, and develop accurate forecasts.
• Effective communication and collaboration between various departments.
• Lead the logistic team and collaborate with internal and external stakeholders.
• To fully take charge of all procurement activities in the company such as:
  • Sourcing suppliers and compare quotations, negotiate with suppliers
  • Review and process purchase requirements
  • Ensuring timely delivery of goods and services
  • Issuance of purchasing related documents such as Purchase Order
  • Prepare and maintain proper filing and records of all purchasing related documents
  • Check and match and verify suppliers’ invoices, delivery orders, and other supporting
  • Review, compare and evaluate products and services
  • Establish and maintain a good relationship with suppliers
  • Check and reconcile stock report if there are any discrepancy
• Constantly research and evaluate new prospective suppliers.
• Work hand in hand with store and operational staffs on their requirements.
• Check data entries enter into system by Store Assistant.
• Assist Admin in any administrative document.
• Assist in key in purchase invoices.
• You may be assigned to new duties/responsibility from time to time.
• Any ad-hoc or other duties.

Accounts and Admin Assistant

Job Responsibilities

• Support finance, project and operations Team in general admin duties.
• Able to prepare a full set of accounts and a good understanding of double entry.
• Familiar with preparation of customer quotations and sales orders to support finance, project and operations activities.
• Tracking of customers quotations, sales orders and project delivery schedule.
• Maintain proper documentation of finance, project and operations control.
• Other duties as assigned from time to time by superior.

Job Requirements

• Minimum GCE ‘O’ level.
• Proficient in MS Office applications such as Excel, Windows and Power point.
• Preferably familiar in Xero accounting software and MurHo Inventory management system.
• Able to work independently for tasks and support finance, project and operations team in the execution of projects, operations, accounting and administrative duties.
• Prepared for interdepartmental transfer within the Sea Forrest Group of companies for job rotation roles in finance, projects and operations.
• Able to communicate effectively in English.
• Pleasant personality with a positive attitude and a willingness to learn.

The School of Mechanical & Aerospace Engineering (MAE) is seeking enthusiastic individuals as Senior Research Engineer I with exceptional credentials to join a vibrant and dynamic research group undertaking fundamental research into eVTOL Technologies.

The work is carried out at the eVTOL Research and Innovation Centre at Nanyang Technological University, Singapore. The environment provides excellent training in a highly motivated working environment with state-of-the-art facilities.

Key Responsibilities:

• Design, development, and integration of avionics systems for advanced eVTOL project, ensuring seamless integration of avionics components with other aircraft systems.
• Oversee the design and development of avionics hardware, including sensor integration and communication interface control.
• Design a new ground station together with the supplier to operate the eVTOL
• Manage software development for avionics systems, ensuring compliance with safety and performance standards.
• Develop and implement a testing plan to verify the functionality and reliability of avionics systems.
• Conduct system testing, and troubleshooting, and participate in flight testing as needed.
• Prepare and maintain comprehensive documentation, including technical specifications, test plans, test reports and operation manual.
• Manage suppliers, and communicate project status and technical information to both technical and non-technical stakeholders.

Job Requirements:

• Bachelor’s or master’s degree in electrical engineering, Aerospace Engineering, or any related field.
• Minimum 3 years’ experience in avionics engineering with a focus on system design and integration, experience in ground station development is preferred.
• Experience with testing and verification of avionics systems.
• Familiarity with industry regulations and certification processes.
• Excellent communication and collaboration skills.
• Fluent English skill is a must.

We regret that only shortlisted candidates will be notified.

Experience in the area of Engines complete details and the service scope lead time to repir and the source of components in around the worlds. Assist and improve all technical details together with Management team and report to seniors. documentation and maintain documents. Day to day activities maintannce records and systamise. Should know how to use computers with complte knowledge.

Career Highlights:

• Competitive compensation benefits
• Company’s transport available.
• Good career advancement opportunities

Job Description:

• Conduct toolbox meetings and implement safety and health measures at site
• Conduct regular site inspections and follow up actions to ensure HSE compliance
• Ensure each person working on site is registered in the site registry and carry out a site-specific induction for everyone
• Investigate and report on any accidents that occur and take actions to prevent re-occurrence
• Prepare Method Statements/Risk Assessments/Safe Work Procedure
• Maintain project accident statistics
• Handle all safety issues and routines at site
• Liaise with all authorities on safety matters
• Ensure firefighting and security equipment are maintained
• Ensure compliance to the Company’s Code of Conduct and mandatory regulations

Job Requirements:

• Diploma in Workplace Safety & Health/Engineering or related discipline
• Minimum 3 years’ experience in marine shipyard operations
• Good in writing business/technical reporting and presentation skills
• Ensure compliance with all legal and regulatory requirements
• Good knowledge of Safety Regulations and Procedures
• Paramedic in Arm Forces and SCDF, Healthcare of Industrial background would be an added advantage

We are seeking a skilled Service Technician (Electrical) to join our team at the Sea Forrest Creation Lab. The ideal candidate will be responsible for:

Responsibilities:

• Inspect panels and electrical systems to identify and resolve any issues or malfunctions.
• Conduct regular tests to ensure proper functioning and compliance with safety standards.
• Ensure that electrical panels and systems meet the required standards and specifications.
• Document electrical panel specifications, wiring diagrams, and system configurations.
• Coordinate with shipyard for the installation, commissioning and testing of all electrical systems and panels.
• Hands on testing, troubleshooting, and commissioning of all supplied electrical systems and panels.
• Work in cooperation with other internal and external stakeholders to ensure that supplied systems pass all relevant class surveys and inspections.
• Produce and document all necessary paperwork for class certifications during commissioning process.

Workshop Inventory Management:

• Maintain accurate records of all items in the workshop inventory.
• Monitor stock levels and reorder supplies as needed.
• Conduct regular stock checks and report any discrepancies.

Receiving and Dispatch:

• Receive incoming materials, tools, and equipment.
• Verify the accuracy of received items against purchase orders.
• Prepare items for dispatch, ensuring proper packaging and documentation.

Organizing and Storing:

• Arrange and organize materials in the workshop store for easy accessibility.
• Implement an efficient storage system to maximize space utilization.
• Label and categorize items to facilitate quick retrieval.

Maintaining a Clean and Safe Environment:

• Keep the workshop area clean, organized, and free from safety hazards.
• Adhere to safety protocols when handling, working with and storing materials.
• Ensure compliance with safety regulations and guidelines in all electrical activities.
• Conduct regular safety checks on electrical systems to mitigate potential hazards.

Equipment Maintenance:

• Ensure that workshop equipment, such as tools, machineries, shelves and racks, are in good condition.
• Report any maintenance or repair needs to the relevant department.

Qualifications / Skills:

• Able to read drawings and terminate central cables.
• Strong troubleshooting and problem-solving skills for Electrical main switchboard.
• Familiarity with electrical testing equipment and diagnostic tools.
• Ability to read and interpret technical drawings and schematics.
• Attention to detail and ability to work independently or as part of a team.
• Possession of a Class 3 Driving Licence or WSQ Forklift Operator Licence is advantageous.
• Prior work experience in shipyard is advantageous.

The School of Computer Science and Engineering (SCSE) invites applications for the position of Senior Research Fellow. The Senior Research Fellow will be responsible for performing intelligent visual signal processing/compression/computing.

The Senior Research Fellow will also assist in the submission of comprehensive reports/IDs/Demos/papers summarizing/justifying the pioneer and innovative research performed

Key Responsibilities:

• To perform the pioneer research in exploring visual signal representation towards machine uses.
• To perform systematic investigation into the characteristics of visual signal representation for machine uses, to meet the emerging requirements for AI.
• To devise a new scheme for visual signal representation with deep-learnt visual features, toward machine uses.
• To investigate feature-level just-noticeable difference modelling for machines to facilitate assessment and optimization.
• To formulate a comprehensive visual feature codec for machine uses.
• To set up and analyze experiments and datasets under different conditions.
• To propose a methodology/framework in a software prototype to be developed in the project.
• To report research findings in a form of reports/papers and present in international peer-reviewed conferences and journals.
• To be involved in the mentoring of PhD/Masters/FYP students.

Job Requirements:

• Possess a PhD degree in Computer Science (And Engineering), Electronic Engineering, Applied Mathematics, Perception Sciences, Etc.
• Have good technical reading, writing and programming skills.
• Have good experience and track record for related R&D.
• High desire for technological exploration and achievement.
• Background knowledge in signal representation/processing, visual data compression, and data-driven and machine learning/analysis.
• Prior research experience and track record in R&D and standardization.
• Prior experience in state-of-the-art AI techniques.
• Mastering of a programming language would be valued (e.g. Python, C, Matlab, …)
• Self-driven, highly motivated, with interest to work with other researchers and scientists (as a team player) to produce high-quality research

We regret that only shortlisted candidates will be notified.

The School of Mechanical & Aerospace Engineering (MAE) invites applications for the position of Research Fellow.

Key Responsibilities:

• Software Simulation.
• Strong emphasis on using CFD and other tools to allow the team in selection and characterization of protein-based formulation for thermo-mechanical extrusion for 3D printing of food. To ensure compatibility between the 3D-printing process and the protein-based edible inks, the design of the extrusion system is accompanied by comprehensive computational fluid dynamics CFD methods.
• FEM simulation and numerical methods allow optimization of material-formulation with respect to material-process interaction to ensure high printing quality and material compatibility. Simulations reduce the number of experiments required during process optimization. CFD methods allow analyzing the fluid flow characteristics and printing profile in relation to the rheological properties of the printing formulations.
• Optimization of 3D-printer’s software and employment of Artificial Intelligence (AI) towards 3D printing optimization and performance characterization
  
• Sensors study for Food Production.Overall responsible for various sensors study in the food production system which includes in-line monitoring and treatment systems. In-line printing optimization is integrated within the developed 3D-printing system. Texture variation study using sensors for 3D-printing of food.
  
• Publication & other Lab roles.To publish latest research findings in top journals and publications.
  Work closely with Co-Investigator in providing timely report for consortium.
  Managing equipment, supplies, and resources, including procurement and maintenance of lab equipment and replenish consumables required.
  

Job Requirements:

• Doctorate degree in Mechanical Engineering or equivalent
• Exceptional CFD and FEM, sensors related and problem solving skills.
• Capable of working independently and within a team, while supervising other undergraduate and masters students working on their projects on related areas.
• Can communicate and present technically complex issues to multidisciplinary/multinational teams.
• Have a good engineering sense and aptitude.
• Have outstanding team management and leadership skills
• Experience in simulation work for 3D printing of food and sensors related work on food industry
• Fluent in use of CFD, FEM for simulation
• Strong publication record and demonstrators on candidate’s experience in the field
• Practical and hands-on, active self-learner and able to pay close attention to detail.
• Proficiency in English and verbal communication, have strong work ethic and can work independently and comfortably in a multidisciplinary environment.

We regret that only shortlisted candidates will be notified.