Job Description

• Review and interpret all relevant drawings, specifications and reports;
• Handle full scope of Quantity Surveyor duties which includes material take-off and variations i.e. Structural works; Piping works; Electrical and Instrumental works; Mechanical and Equipment works; Painting works
• Able to understand the Project contract documents and inform and assist site team for the cost estimate for any additional works
• Prepare the commercial tenders, including material take-off, preparation of BQs and technical queries
• Analyse tender pricing and prepare contractors’ bill of quantities
• Manage all related stakeholder liaison activities with a range of interested parties i.e. contractors, subcontractors, consultants and authorities on the project including but not limited to Contracts & Legal Department, Engineering Department and External Consultants;
• Prepare monthly progress claims to client
• Manage subcontractor and vendor claims
• Manage project timeline and cost

Requirements

• Candidate must possess at least a Bachelor’s degree or equivalent in Quantity Survey, Engineering (Mechanical/Civil).
• Minimum 3 years of relevant working experience in the oil and gas industry and familiar with EPC projects
• Meticulous, analytical, eye for details and a good team player
• Ability to multi-task in a fast paced and dynamic environment
• Prior experience in leading a Quantity Surveyor team will be advantageous and can be considered for a senior role.
• Able to commence on short notice will be preferred

Job Description

• Provide administrative and contractual support and maintain all required project information throughout each project for claim purposes to ensure that the claim data are up-to-date and comprehensive.
• Verify the accuracy of survey data, including measurements and calculations conducted at survey sites.
• Consult with clients, vendors, personnel in other departments or construction foreman to discuss and formulate estimates and resolve issues.
• Prepare progressive claims and potential variaton claims at regular intervals of the project.
• Maitaining proper documentation of correspondence from contract award to job completion to ensure all relevant claims are lodged accordingly to the client timely.
• Ensure proper closing-out of project account finalization.

Job Specification

• At least a degree in Civil Engineering or equivalent.
• At least 8 years of Singapore based Quantity Surveyor working experience in the related field is required for this position.
• Candidate with experience in Engineering, Procurement, Construction (EPC) will be preferred.
• Willing to work in the West.
• Remuneration will be commensurate in according to working experience.

Job Summary

• To ensure worksite compliance with Workplace, Safety and Health and Environmental Management / Regulation.
• Prepare safety report such as Risk Assessment (RA), Safe Work Procedure (SWP), Permit-to-work for shipyard & maintenance state and other necessary documentation for management and regulatory bodies.
• To oversee and lead the subcontractors in implementing the Company’s safety systems at sites.
• To liaise closely with site operations staff and Project / Site Managers / Government Regulatory Authorities.
• To ensure all related safety equipment and PPE are in order and properly maintained.
• To carry out any related functions/duties and processes as directed by the Yard Manager.
• Conduct departmental onboarding and safety briefings, training, and toolbox talks with workers to promote awareness of safety practices.
• To conduct daily VSCC and assist in planning and directing the committee's functions.
• Secondary Roles as Port Facility Security Officer (PFSO) & Ad-Hoc duties as assigned by Management.

Document Control

• Ensure proper documentation prepared by each section, review and file the documents for technical, operations, purchasing and inventory section.

WSH Compliance

• Ensure WSH compliance for operations to shipbuilding and ship-repairing, and maintenance.
• Oversee the yard safety, vessels, and operations during all shipbuilding and ship repairs activities.

Job Requirements

• Min. O level or ITE Certificate / WSQ Advance Certificate in Workplace Safety and Health.
• At least 3 years of relevant experience preferably in a Shipyard.
• Excellent communication skills and ability to coordinate between departments for documentation purposes.
• Preferably to have a shipyard safety supervisor certificate and WSQ Advanced Certificate in Workplace Safety and Health;
• Proficient in MS Office
• 5.5 working days

Job Responsibilities

• Take full responsibility for conducting all necessary field surveys, from initial site reconnaissance and boundary identification to final as-built documentation.

• Establish and maintain control points and site benchmarks, ensuring their integrity throughout the construction process.

• Lead the execution of topographic and as-built surveys to capture essential data.

• Take charge of site layout by performing accurate setting out and marking of all structural and infrastructural elements such as roads, buildings, utilities, and earthworks.

• Leadership role in managing and guiding the surveying team, including junior surveyors and chainmen.

• Act as the primary liaison between the survey team and project engineers, contractors, and stakeholders.

• Oversee the collection, processing, and interpretation of survey data using tools like total stations (Sokkia, Leica), and AutoCAD. Prepare and present comprehensive survey reports that inform key project decisions.

• Take ownership of identifying and resolving on-site issues, such as site discrepancies, inaccuracies in setting out, or conflicts between design plans and site conditions.

• Implement strict quality control protocols to ensure the accuracy, reliability, and legal compliance of all surveying tasks.

Job Requirements

• Proficient in using common total stations (Sokkia, Leica)

• Min 1 year experience in land surveying. At least 3 year(s) of working experience in the related field is required for this position.

• Experience with computer-aided design tools, such as AutoCAD Civil 3D software

• Proficient in Math and cartography skills

• Written and verbal communication skills

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Engineering (Civil) or equivalent

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Responsibilities:

• Take charge of all UI/UX design work of mobile apps (10 or more).
• Design and create concepts such as Flow Chart that provides overview of the whole project.
• Provide art assets for all platforms (iOS and Android) and marketing brochures.

Requirements:

• Dip / B.S in Graphic Design or related fields from accredited and reputable institutions.
• Proven work experience as a Digital Designer. Qualified fresh graduates are welcome to apply.
• Possess a good portfolio that demonstrates your graphic, web or UI designs.
• Experience in using Adobe Photoshop.
• Experience in using Figma.
• Experience with videography software (iMovie Pro) is a plus.

Requirment:

• Working days & time: 5.5days 9am – 6pm / 9am -1pm,
• Location: Main Office at Tuas
• Salary: $3500 - $4500
• Degree/Diploma in Mechanical/Electrical Engineering & or Specialist Diploma in M&E Coordination.
• Minimum 3 years of working experiences as Project coordinator/Site supervisor in construction industry of Singapore.
• Basic computer skills to edit Microsoft , AutoCad, PDF & Etc.
• Able to read drawings, write and speak in English.
• Process good interpersonal & communication skill with a positive attitude.
• An independent, also be able to work in Team, can cope in a fast-paced environment. Highly motivated and a good team player.

Duties and responsibilities:

1.Duty

To conduct tools box briefing, planning and lead a team of electrician/worker to execute maintenance and/or project work

• Attend meeting with client
• Plan for manpower and materials for project works
• Study drawings and explain to supervisors.
• Conduct routine check and arrange for corrective work where necessary
• Report to Project Manager on project status and any problems encounter
• Prepare sample submission, shop drawings, as built drawing and O&M submission
• Sign workers timecard

2. Responsibility

• Ensure materials available for workers
• Plan works for workers
• Ensure workers are doing work correctly and safely
• Check site status and report to Project Manager
• Liaise with client representative on assigned project
• Attend project meeting
• Co-ordinate site works with main con
• 
  
• Working days & time: 5.5days 9am – 6pm / 9am -1pm,
• Location: Main Office at Tuas
• Salary: $3500 - $4500

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Job Summary:

The Senior Planner for FPSO projects is responsible for developing, maintaining, and monitoring project schedules, ensuring all project phases align with timelines, resources, and milestones. This role involves extensive planning and coordination, collaborating with cross-functional teams to optimize project execution and track progress. The Senior Planner will provide analytical support to project leadership, ensuring efficient resource utilization and identifying potential schedule risks to mitigate delays.

Key Responsibilities:

• Project Scheduling and Planning:Develop detailed project schedules for all FPSO project phases, including engineering, procurement, construction, commissioning, and installation.
  Utilize planning software (e.g., Primavera P6, MS Project) to create and update schedules, tracking critical paths, dependencies, and progress.
  Conduct resource loading and leveling to ensure optimal allocation of labor, materials, and equipment.
  
• Progress Monitoring and Reporting:Monitor project progress and performance, preparing weekly and monthly reports to provide insights on schedule adherence and completion forecasts.
  Implement Earned Value Management (EVM) and other project control techniques to track project progress, productivity, and variances.
  Present schedule updates, critical paths, and potential risks to project stakeholders, recommending corrective actions where necessary.
  
• Risk Management and Mitigation:Identify potential schedule risks and conflicts, performing risk analysis and developing mitigation plans to avoid delays.
  Conduct "what-if" analyses to evaluate alternative schedules and contingency planning to address any project changes.
  Collaborate with the project team to adjust schedules in response to project changes or unforeseen issues, ensuring minimal impact on deadlines.
  
• Cross-Functional Coordination:Work closely with engineering, procurement, construction, and commissioning teams to ensure alignment and integration of schedule activities.
  Interface with contractors and vendors, monitoring their schedules to ensure they align with overall project timelines.
  Facilitate regular planning meetings to review progress, resolve issues, and optimize workflows.
  

Qualifications and Experience:

• Bachelor’s degree in Engineering, Project Management, or a related field.
• 8+ years of experience in project planning and scheduling, with a focus on FPSO or offshore oil and gas projects.
• Extensive knowledge of planning software, such as Primavera P6 and MS Project, with experience in advanced scheduling techniques.
• Proficiency in Earned Value Management (EVM) and critical path analysis.

Skills and Competencies:

• Strong analytical and problem-solving skills with a meticulous attention to detail.
• Effective communication and interpersonal skills for cross-functional collaboration and reporting.
• Ability to handle multiple priorities and manage schedule adjustments under time-sensitive conditions.
• Strong understanding of offshore project lifecycles, including FPSO-specific challenges and requirements.

Job Requirements：

1. Assist in managing day-to-day HR operations (full spectrum) related to staffing.

2. Oversee and support the recruitment process, including interviewing, onboarding, and training new employees.

3. Support the implementation of performance appraisals and assist managers in assessing employee performance.

4. Provide guidance on goal setting, development plans, and performance improvement actions.

5. Maintain records of employee performance and ensure consistency in evaluations.

6. Track employee progress post-training to ensure effectiveness.

7. Ensure HR policies and procedures are followed and aligned with current labor laws and organizational goals.

8. Monitor adherence to workplace health, safety, and legal regulations.

9. Assist in updating employee handbooks and maintaining HR documentation.

10. Prepare regular reports on staffing levels, HR metrics, etc for management.

11. Contribute to developing HR strategies aligned with the overall organizational goals.

Job Requirements：

1. Bachelor’s degree in Human Resources, Business Administration, or related field.

2. Additional HR certifications (CIPD, SHRM-CP, IHRP-CP, IHRP-SP, etc.) are a plus.

3. At least 5 years of experience in Human Resources, with a focus on staff management or employee relations.

4. Ability to mediate and resolve conflicts professionally.

5. Willingness to continuously update knowledge on HR best practices and labor law changes.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Summary:

The Project Engineer is responsible for planning, coordinating, and executing engineering projects, ensuring they are completed on time, within budget, and to the required quality standards. This role involves working closely with project managers, engineering teams, and other departments to ensure successful project delivery. The Project Engineer will be involved in project planning, technical review, and site coordination, providing essential support throughout the project lifecycle.

Key Responsibilities:

• Project Planning and Coordination:Assist in defining project scope, objectives, and deliverables, ensuring alignment with client requirements and business goals.
  Develop and monitor project schedules, budgets, and work plans, using project management tools to track progress and ensure timely completion.
  Coordinate with engineering, procurement, and construction teams to ensure alignment on project milestones and deliverables.
  
• Technical Support and Design Review:Review and interpret technical drawings, specifications, and documentation to ensure engineering quality and compliance.
  Provide technical input to the design process, working closely with design teams to address any engineering challenges.
  Support project manager in evaluating design changes, assessing their impact on project schedules and budgets.
  
• Site Coordination and Quality Control:Conduct site visits as needed to monitor project progress, identify issues, and ensure compliance with design specifications and safety standards.
  Coordinate with contractors, vendors, and suppliers to ensure materials and equipment meet quality requirements and project specifications.
  Assist in conducting quality control inspections, ensuring that installations align with engineering and regulatory standards.
  
• Documentation and Reporting:Prepare and maintain project documentation, including status reports, meeting minutes, and technical documents.
  Provide regular updates to project managers on project progress, potential risks, and any adjustments needed to stay on track.
  Support procurement activities by reviewing material specifications and participating in vendor evaluations as necessary.
  

Qualifications and Experience:

• Bachelor’s degree in Engineering (Mechanical, Civil, Electrical, or a related field).
• 3-5 years of experience in a project engineering role, preferably in [specific industry, e.g., oil and gas, construction, manufacturing].
• Proficiency in project management software (e.g., MS Project, Primavera) and CAD software (e.g., AutoCAD).
• Familiarity with industry standards and codes relevant to engineering projects.

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

Brief Summary:

To support, develop and implement improvements to product quality and systems

Job Description:

· Create acceptance test plan based on customer drawing

· Support internal instrument calibration activities

· Support master equipment calibration by sourcing external parties

· Support quality First article inspection (FAI) activities

· Provide production metrology technical support on Zygo New View Measurement

Qualifications:

Nitec in an engineering discipline

Required Skills & Abilities:

· Microsoft Office applications such as Excel

· Excellent verbal and written communications skills

· Good analytical skills to interpret data

· Good problem-solving skills

· Good interpersonal skills and a team player

· Experienced in a manufacturing environment will be advantageous

*3 months contract, subject to extension

Interested applicants can also send your resume to [email protected]

Job Description & Requirements

ASNT NDT Level III, PCN NDT Level III, Advanced NDT Specialist

Familiarisation of ASME & API Codes & Standards

Ability to assume full technical responsibility for clients’ NDT facilities.

Proven experience of providing solutions to clients’ NDT inspection related problems.

Maintain all of equipment and consumable storage in the store room to be ready for using with good conditions under acceptance criteria specific by client or international standard.

Willingness to be flexible and multi-task as part of a team, and contribute to company objectives.

Strongly motivated to achieve results, with a high degree of professionalism, honesty and integrity.

Excellent organizational and time management skills, able to priorities workloads with competing deadlines.

Good written skills to produce coursework and training materials, as well as clients’ NDT procedures, written practices, techniques and audit reports.

Provide internal trainiand technical guidance for other inspectors

Ensure that all personal certification is kept up to date.

Develop and approve NDT procedures, written practices and NDT techniques to a high standard that comply with clients

Creative skills to plan and deliver lessons in a professional, positive and engaging manner.

Ensure adequate training and cross checking the site works, share knowledgewith team members and contribute to team development.

To analyse work plans and projects, and as well as recommendations of every working unit; and to give advice on safety measures to the employer.

Feedback on revised Equipment’s and software’s for improvement.

Feedback after testing the new equipment on site for improvement.

Extensive knowledge of own subject area with extensive industrial NDT experience holding multiple NDT method Level III certification ASNT (RT,PT,UT,MT,VT,ET) /CSWIP (PAUT/TOFD)

Preferable:

Master's degree in NDT

Bachelor degree in Mechanical Engineering

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

· Ensure timely generation and issuance of NDT report on daily basis.

· The inspector/team lead / engineer will perform inspections applying various NDT techniques in accordance with applicable specific code, procedure, and or written criteria.

To be successful in this position, you must have the ability to demonstrate or possess:

· Minimum 3 years of experience in UT, MT, PT, ET, RT and RI.

· Must be a PCN Level 2 or ISO Level II in the above NDT methods.

· Familiar with codes and standards.

· Candidate must be flexible and responsive when call for assignments and willing to work after hours and weekends when necessary.

· Maintain a professionalism and competence at work

· Share in our purpose – to serve others, to pursue excellence, and to grow profitably,

· Employee will work as a team lead / member of local call out crews performing UT, MT, PT, ET, RT and RI.

The School of Materials Science and Engineering (MSE) provides a vibrant and nurturing environment for staff and students to carry out inter-disciplinary research in key areas such as Computational Materials Science, Characterisation Materials Science, Defence Composite Materials, Functional Composite Materials, Energy, Nanomaterials, Low Dimensional Materials, Biomaterials Materials, Biological Materials, Bioinspired Materials and Sustainable Materials.

For more details, please view https://www.ntu.edu.sg/mse/research.

We are seeking a highly motivated research fellow to join our dynamic team at the School of Materials and Science Engineering at Nanyang Technological University, Singapore. The successful candidate will contribute to cutting-edge research at the intersection of materials science, advanced manufacturing, robotics, and sensing.

Key Responsibilities:

• Conduct independent research in areas related to material science and engineering in soft robotics/self-healing / soft interfaces
• Develop and implement robotic control systems
• Optimization of formulation for UV 3D printing / direct ink writing 3D printing
• Contribute to ongoing soft robotics research
• Design and prototype using CAD software and 3D printing technologies
• Collaborate with faculty and other researchers on interdisciplinary projects
• Publish research findings in peer-reviewed journals and present at conferences
• Assist in mentoring students

Job Requirements:

• Ph.D. in Material Science, Engineering, Robotics, Sensors, or a closely related field
• Strong background in formulations for 3D printing
• Experience in soft robotics applications
• Proficiency in CAD software and 3D printing technologies
• Strong programming skills (e.g., Python, C++, MATLAB)
• Excellent written and verbal communication skills
• Ability to work independently and as part of a team
• Experience with machine learning and AI applications in engineering is advantageous

We regret to inform that only shortlisted candidates will be notified.

Job Description:

As a Project Engineer specializing in structural steel construction, you will play a pivotal role in the planning, execution, and completion of our projects. Working closely with our project managers, you will oversee all aspects of construction, ensuring adherence to timelines, budgets, and quality standards. This is an excellent opportunity for a talented individual to make a significant impact in the dynamic field of construction engineering.

Key Responsibilities:

• Collaborate with project managers to develop project plans, schedules, and budgets for structural steel construction projects.
• Conduct thorough site assessments and surveys to identify potential challenges and ensure compliance with regulatory requirements.
• Coordinate with architects, engineers, subcontractors, and suppliers to facilitate the timely procurement of materials and resources.
• Manage day-to-day construction activities, including site logistics, safety protocols, and quality control measures.
• Monitor project progress and performance, identifying and addressing deviations from plans and specifications.
• Provide technical expertise and problem-solving support to resolve construction-related issues effectively.
• Prepare and review engineering drawings, specifications, and documentation to ensure accuracy and completeness.
• Foster a culture of teamwork, innovation, and continuous improvement among project team members.

Qualifications:

• Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.
• Minimum of 2 years of experience in project engineering, preferably in the structural steel construction industry.
• Proficiency in Tekla software.
• Strong understanding of construction principles, practices, and techniques.
• Excellent communication, leadership, and interpersonal skills.
• Ability to manage multiple priorities in a fast-paced environment.
• Familiarity with Singapore building codes, regulations, and industry standards.
• Immediate availability will be preferred

• Assist the Manager to oversee and manage the Engineering Department.
• Technical review on new project orders and order assignments to Technical engineer & Drafter team.
• Ensure timely submission of engineering documents (Control Schematic Drawing, General Assembly Drawing, Wiring Diagram, Nameplate Drawing, Test Procedure, Data Sheet etc).
• To review project engineering documents prepared by Technical Engineer & Drafter team before submitting them to client.
• Provide advice and guidance to Technical Engineer & Drafter team for any technical queries and to support other ops team on various aspects of technical/engineering matters.
• To check and make recommendations based on common industrial engineering practice.
• To provide and implement cost effective and best engineering solutions for project to stay competitive.
• To provide sound engineering practice and engineering calculation where applicable in a timely manner to meet project timeline.
• To review international standards and/or project specifications for product compliance. i.e. ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards etc related to Valve Automation and/or instrumentation.
• Providing field support for customers to resolve after-sales technical issues or technical clarifications.
• To attend internal/external kick off Meeting (KOM) when required.
• Travel with technicians to installation base and sites if the need arises.
• To assist manager to lead the department’s improvement programs and/or process efficiency initiatives.
• To assist manager in maintaining and updating the department's Standard Operating Procedures.
• To carry out Engineering personnel annual performance review to ensure competency and give counselling when required.
• Support new employee orientation by providing brief engineering department process flow training.
• Support and guide the Operations department in resolving aftermarket technical issues such as Product Design changes / Fault Finding / Supplier Discrepancies.

Requirements:

• Bachelor’s Degree / Diploma in Mechanical/Instrumentation or equivalent
• Minimum 6 to 8 years supervisory experience in Valve Automation and/or instrumentation background, preferably in the Valves & Actuators field for Oil & Gas Market.
• Conversant with ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation.
• Possess a strong knowledge of pneumatic and hydraulic circuits.
• Must be able to read and interpret drawings, specifications, and technical documents.
• Knowledge of AutoCAD 2D/3D or drafting software & SAP will be an added advantage.
• Familiar and possess intermediate knowledge in Microsoft Office and Microsoft 365
• Very self-driven and able to drive the team. Possess strong interpersonal skills and can work as a team.
• Strong verbal and written communication skills

• Perform audits and report the effectiveness of the system safety program.
• Support launch vehicle design and development to ensure that customer and internal goals for safety, mission success, and performance are met.
• Ability to develop schedules, manage budget and complete work according to the developed schedule.
• Briefing safety of the program at technical reviews and as part of the safety approval process.
• Support incident investigations with business units, determine root causes and drive corrective actions.