Key Responsibilities:

· To champion and liaise with production personnel on the investigation of root cause(s) of non-conformance and procedural failures

· To ensure that corrective actions are in place and implemented for all non-conformances detected during audits, internal rejects, supplier rejects & customer complaints

· Writing or amending quality / HSE Operating Procedures & Work Instructions as required

· Writing Quality Control plans & Inspection Test Plan (ITP) as per contractual requirements, APIand licensors’ requirements

· To update and maintain all the technical specification, quality manuals, procedures, work instructions and documents

· To review and approve required specifications and revisions in documentation prior releasing for production or customer

· To review and approve process routers prior to releasing for production

· To prepare, review & approve Quality Documentations such as drawings, first piece, in-process & final inspection reports prior to product release to customers

· To prepare monthly quality & HSE non-conformance analysis and KPI report

· To champion & attend to customer, API, connection licensor audit and conformance

· To conduct process audit and internal quality scheduled/unscheduled audit

· To conduct audit, process inspection on sub-contract suppliers and maintenance of Approved Vendor List (AVL)

· Responsible for ensuring work is carried out in accordance with documented procedures

· Actively participate and involve in appropriate development of HSE matters in areas of hazard / incident identifications, risk assessments and determination of controls

· To participate in scheduled/unscheduled safety walks & liaison all HSE matters with safety officer till completion

· Ensure work activities and behavior achieved conformity to the HSE policy, objectives and procedures outlined in the HSE management system and compliance to applicable local legal requirements

· To actively champion, participate & prepare all documentations on all New Product Introduction (NPI) projects

· In addition to these duties/responsibilities employee is required to carry out all additional duties as & when directed & required by QHSE manager

Knowledge and Skills:

· 5CT / APISpecification knowledge (desirable)

· Ability to work under pressure to tight deadlines (essential)

· Analytical and creative approach to problem solving (essential)

· Ability to communicate effectively on all levels with good management and leadership skills (essential)

· Ability to work under owns initiative with minimal supervision (essential)

· Ability to think strategically (essential)

Qualifications:

· Relevant Industrial Quality Training Certification (essential)

· Diploma in Quality / Mechanical engineering or equivalent (desirable)

· Good PC skills (essential)

Experience:

· Min 3 years related experience within OCTG production environment (desirable)

Additional Info requires: -

1) Experience with Quality Management System (QMS) such as API Q1 & ISO 9001:2015

2) Some background / experience with production & inspection process such as machining process & dimension inspection after machining process.

Responsibility

• Perform the activities of engineering in accordance with the established procedures, service manuals and required standards
• Ensures that engineering design and project management are planned in accordance with the customer's specifications
• Ensures that all engineering designs, technical drawings and appropriate standards used are properly documented
• Co-ordinates with Sales-In-Charge in notifying customers of any changes in design, documentation, planning, timing or services performed
• Ensures that projects filing and technical manuals compilation are in accordance with procedures and process control
• Notifies Admin Department on the schedule for delivery and invoice in accordance with customers' requirements till project closure
• Raise Purchase Requisition and costing of procurements in Material List and request for relevant documents from suppliers
• Notifies Sales-In-Charge and Purchaser of any variations or additional supplies required for the project or recall project kick-off meeting for major changes, if deemed necessary
• Ensures procurements are processed in advance to meet contractual schedule
• Ensures that receive goods are verified with purchase orders before approving payment to suppliers
• Notifies the Purchaser immediately to withhold or stop payments to suppliers if goods received require any exchange of parts or are defective with supporting correspondences
• Assists the technical teams to complete system testing, commissioning and ensures that the services is properly to meet the required specifications
• Reviews Project Files Closure and ensures that contents are fully intact with updated information. Ensures that drawings (including softcopies of drawings) and manuals are backed up in disk and server prior to handing over to P & E Secretary for storage in data room
• Ensures that a non-conformity report is being raised as and when necessary
• Ensures that non-conformances are promptly resolved by means of investigation and corrective action
• Reviews and approves supplier and contractor on work completion which relates to project work and purchase order
  
  Requirements
• Diploma/Degree/Post Graduate in Electrical & Electronics Engineering
• Relevant experience in control & instrumentation background, PLC Programming, automation, electrical & electronic engineering is a must
• Good communication skills

Responsibilities

• Interprets specification requirement and works on cable routing using CABSYS and model in Plant Design Management System (PDMS)
• Oversees equipment layout in 3D modelling on electrical equipment and all routing in 3D
• Works on 2D drawings in AutoCAD (Single Line Diagrams, Lighting & Small Power Layout, Wiring & Interconnection Diagrams)
• Participates in Plant Design Management System (PDMS) model review to assist engineers to carry out operations
• Assists engineering in preparing Material Take-Off (MTO) process, cable schedule, Load list & Master Documents Register (MDR)

Requirements

• Diploma in Electrical and/or Electronics Engineering or related engineering disciplines
• Min 5-10 years of experience in offshore oil and gas platform and/or Offshore Living Quarter experience
• Able to handle pressure and work under tight schedule.
• Possess knowledge in contractual documentations.
• Knowledge in 3D modelling for electrical equipment and installations

Our Address and Working Hours:

Seatrium Limited

(Admiralty Yard)

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Fri: 8am - 5:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• To provide industrial engineering support to shop production, internal & external customers in manufacturing process development, tools & fixture design and implementation, machines programming, procedure development as per engineering BOM requirement and business need
• To provide the CAM software application support to CNC programming, including CAM software postprocessor improvement and creating new
• Create manufacturing process (routing) and procedure (work instruction) per engineering BOM, quality plan and manufacturing process requirement.
• Design tooling and fixture as manufacturing process and operations’ needs.
• Design CNC machines programming and PLC recipe as process requirement and productions schedule.
• Analyze and continuously improve manufacturing process to achieve best production safety, quality, and cost performance.
• Evaluate and implement new manufacturing technology for shop operations objectives, manufacturing capability and capacity improvement.
• Develop and provide training for shop technicians for new products, process, tooling and others’ needs.
• Perform other technical support or projects as required
• Degree in Mechanical / Manufacturing Engineering.
• Familiar with CAD / CAM 2D drawing and 3D modelling.
• Familiar with MS software

Veronica Neo Shen Hwa - [email protected]

Personnel Reg No: R1110855

Manpower Staffing Services (S) Pte Ltd

EA Licence No: 02C3423

About us

We are a global technology company, driving energy innovation for a balanced planet.​

Together, we create amazing technology that unlocks access to energy for the benefit of all.​

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse group of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Mechanical Engineer (Design / Drilling equipment)

Roles and Responsibilities:

• Provides engineering support to the facility, vendors, and customers during the repair process to ensure project is completed successfully
• Prepare drawings, information and documentation which meets engineering standards to enable the manufacturing group and other departments to produce and market the Company's product
• Carry out product analysis and work under the guidance of more senior Engineers to meet customers' and/or the industry's needs.
• Evaluate equipment condition and specify remanufacture.
• Work within stated procedures to ensure that design records/controls are maintained.
• Be familiar with company products, design principles, manufacturing techniques and industry standards.
• Interface with other Engineers, vendors, and customers to successfully complete repair, assembly and testing of project equipment

Qualifications and Experience:

Bachelor of Science in Engineering, Mechanical field with minimum 1 to 3 years relevant experience

Passionate in engineering initiatives and improvement process

Responsibilities:

· Overseeing projects at one or multiple stipulated sites.

· Assist project manager is the execution of the projects.

· Responsibilites for co-ordination with Consultants, Architects and relevant authorities.

· Design and built Air Conditioning & Mechanical Ventilation systems.

• Cooling load calculations, Equipment selections, Ventilation Duct sizing & Static Pressure loss calculations

· Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.

· Coordinate with Sub-contractor.

· Monitor and ensure progress of works are carried out according to project specification.

· Assist drafting team for design schematic drawing, layout drawing, P&ID drawing. Review and check drawing before submit to main contractor.

· Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.

· Support project manager in the administration of contract, claim, variation and any dispute arise.

· Raise MR and order material & arrange manpower for necessary works.

· Advise site team for work schedule and technical issues.

· Make sure project is carried out according to schedule.

· Responsible for site supervision and implementation.

· Responsible for ensuring implementing safety measures.

· Attend periodic meetings on site co-ordination and progress matters.

Requirements:

· Candidate must possess at least Diploma/Advanced/Higher/Graduate Diploma in Engineering (Mechanical) or equivalent.

· At least 2 Year(s) of working experience in the related field is required for this position.

· Required Skill(s): Excellent leadership, communication & interpersonal skills.

· Able to start work immediate or within short notice period

Job Responsibilities

• Day-to-day operation and maintenance of District Cooling Plant.

• Monitor and manage chiller operations via Building Management System (BMS).

• Monitor and response to fire detection and fire protection related alarms.

• Maintain daily logs of operational issues and maintenance activities.

• Supervise maintenance and repair job.

• Carry out routine plant inspection and data logging.

Job Requirements

• Diploma/Higher NITEC/NITEC in Electrical/Mechanical/Plumbing/Refrigeration or Building Certificate from a recognized training institute.

• Relevant experience in HVAC, chiller plant would be advantageous.

• IT literacy, e.g. Microsoft Words, Excel, Power Point, etc.

• Able to perform 12 hours rotating shifts and weekends duty.

About us (About SLB)

We are a global technology company, driving energy innovation for a balanced planet.​

Together, we create amazing technology that unlocks access to energy for the benefit of all.​

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse group of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Job Summary:

The role of Engineer is to support the Engineering team in checking and approving drawings/designs of Surface Product to meet customer’s requirement and troubleshooting field installation problems. The Engineer will support the manufacturing and refurbishment of Wellhead equipments. The Engineer will also be appointed as the Lead Engineer for project work.

Roles and Responsibilities:

• Checking and approving drawings, information and documentation which meets the Company's engineering standards to enable the manufacturing group and other departments to produce and market the Company’s product.

• Attend and initiate Design and Development Planning and Review session to meet customer’s and industry’s need.

• Carrying out and direct design and development work to meet customers’ and/or the industry’s need.

• Conduct Engineering Training and Lesson Learnt sessions.

• Facilitate and/or conduct Root Cause Analysis session for SQ/PQ related incidents.

• Provide regional engineering support as instructed by Engineering Manager.

• Working and direct work within stated procedures to ensure that design records/control is maintained.

• To be capable of executing or participate in Stackup Test.

• To be capable of customer engagement.

• To be capable of performing design calculations and design analysis. • To be capable of performing/conducting Value Engineering workshop and projects.

• To be capable of reviewing and disposing Non-Conformance or Aftermarket (RGR) product/equipment.

• Be familiar with Industrial Standards, Company products, design principles, manufacturing techniques.

• Looking for candidates with a minimum of 10 years of overall experience.
• Hands-on experience with Hadoop clusters using major distributions such as IBM BigInsights, Hortonworks, and Cloudera.
• In-depth understanding of Spark architecture, including Spark Core, Spark SQL, Spark RDD, and DataFrames.
• Experience in transferring data from RDBMS to HDFS and Hive tables using Sqoop.
• Experience in the design, development, and implementation of ETL application development projects for transforming data to/from data warehouses and data marts.

Immediate Hiring for Product Design & Development Engineer Salary up to $4800!! | 5 days work

Basic Salary: $3200 - $4800

Basic + Allowance + OT

Location: Near Joo Koon MRT

5 days work week

8.30am - 5.30pm

A Leading Manufacturer of Precision Plastic Components company in Singapore in search of Product Design & Development Engineer Talent!

Responsibilities:

• Troubleshoot and optimize process for Liquid Silicon Rubber and Non-LSR

• Perform process validation and window study for thermoplastic and thermoset resin

• Provide timely support in failure analysis and troubleshooting any process related issues to resolve quality issues

• Demonstrate a strong teamwork spirit among all level of people

• Provide coaching, training and guidance to junior technician

• Any other duties as and when assigned

• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Bachelor Degree or Diploma in Mechanical or related

• Minimum 5 years of relevant experience in Manufacturing

• Good understanding of Medical product molding and clean-room environment

• Knowledge in robotic/EOAT programming and setting

• Ability work across functionally and strives for internal and external customer service

• High level of attention to detail and mechanical aptitute

EA Name : MANPOWER ACCESS PTE LTD

EA License No : 13C6854

EA Personnel Name : Chong Wei Ley

EA Personnel Registration No : R22108644

Job Descriptions:

• Responsible for day-to-day support and administration of Data center servers, Storage, and peripherals
• Incident management, Change request fulfilment and resolution to issues.
• Install, configure, and troubleshoot new, existing platforms, including Operating systems, storage devices, server applications and data center networking devices.
• Administer Active Directory, Group Policy, DNS, DHCP, IIS and related Server Ops scope.
• Perform routine server, storage, and backup maintenance, including updates, patching and upgrades.
• Develop, build, maintain proper documentation for all server operation matters.
• Implement controls and compliance according to ISO27001 standard.
• Familiar with Mitre Attack framework and vulnerability assessment
• Collaborate and work with subsidiaries across Asia to fulfil operation workload and ad-hoc projects.
• Lead projects as requested by Management.
• Voluntarily assist when workload is high for site operation.
• Any ad hoc duties as assigned

Job Requirements:

• At least Diploma or Degree in Computer Science or related disciplines
• Requisite MCSA or MCSE certification
• Minimum 5 years or more experience as a System engineer
• Preferably with Strong knowledge on SAN, NAS, and backup
• ITIL4 Certified will be advantages
• Veeam, Dell networker experience preferred.
• Experienced with HP and Dell storage, Hyper V as well as familiar with most virtualization environments2
• Regional exposure an advantage
• Strong knowledge on networking technologies
• Good problem-solving and communication skills is preferred.

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

About us(About SLB)

We are a global technology company, driving energy innovation for a balanced planet.​

Together, we create amazing technology that unlocks access to energy for the benefit of all.​

Our inclusive culture is the key to our success. We collaborate with our internal community of colleagues, alumni, and our valued external partners to support each other and achieve our goals. We aim to raise the bar high. We look for people who are committed to innovation and success and act with integrity to become and be a part of one of the most diverse group of experts in our industry, anywhere around the globe.

Global in outlook, local in practice – and with a united, shared passion for discovering solutions, we hire talented, driven people and support them to succeed, personally and professionally.

Mechanical Engineer (Design / Drilling equipment)

Roles and Responsibilities:

• Provides repair recommendations of customer equipment that are cost effective, follow the standard practices of the facility, and are in accordance with industry requirements.
• Provides engineering support to the facility, vendors, and customers during the repair process to ensure project is completed successfully
• Prepare drawings, information and documentation which meets engineering standards to enable the manufacturing group and other departments to produce and market the Company's product
• Carry out product analysis and work under the guidance of more senior Engineers to meet customers' and/or the industry's needs.
• Evaluate equipment condition and specify remanufacture.
• Work within stated procedures to ensure that design records/controls are maintained.
• Be familiar with company products, design principles, manufacturing techniques and industry standards.
• Interface with other Engineers, vendors, and customers to successfully complete repair, assembly and testing of project equipment

Qualifications and Experience:

• Bachelor of Science in Engineering, Mechanical field with minimum 1 to 3 years relevant experience
• Passionate in engineering initiatives and improvement process

Responsibilities

• Identify Sales opportunities and achieve Orders and Revenue targets
• Cultivate relationships with strategic customers, partners, and inter-departments
• Organize customers’ visits, events and conduct Corporate presentations
• Develop and manage distribution channels and including new leads
• Qualify and present to prospects, sales negotiations
• Develop and execute action plans with internal department PICs
• Co-ordinate Pre-Sales activities and Post-Sales follow-up
• Support marketing activities such as e-commerce, exhibition, brochures
• Support proposals and quotation submission to customers’ RFQs, RFIs
• Others related to Marketing activities & able to handle project as team leads PIC

Requirements

• Diploma/Degree in Marketing, Business Administration, Engineering or related disciplines
• At least 2 years of sales & marketing experience, prefer candidate with Stamping house manufacturing/plastic & metal injection molding or surface finishing industry background
• Strong communication skills with customer and internal department focus
• Result oriented, motivated, resourceful and able to work independently
• Possess high sense of responsibilities & teamwork spirit; confidence & willingness to work efficiently under pressure
• Possess a valid Singapore class 3 driving license
• Able to travel to South East Asia and willing to attend seminar which related to surface finishing including local

Shift Type / Work Hours

• Normal Shift (5 days work week)
• 7.50am to 4.55pm

Benefits

1. Company transport provided at designated pick-up points island-wide.
2. Medical insurance coverage.
3. In-house canteen at subsidized prices.

Please visit our corporate website for more information on Seiko Epson Corporation

Career Highlights:

• Good career advancement opportunities
• Competitive compensation benefits
• Company’s transport available.

Job Description:

• Provide technical support for JD Edwards EnterpriseOne applications, troubleshooting issues and ensuring system availability and performance.
• Collaborate with cross-functional teams to analyze, configure, and implement system enhancements and upgrades.
• Conduct regular system maintenance, including patching, updates, and monitoring system health.
• Offer end-user training and create documentation to facilitate efficient use of JDE applications.
• Respond promptly to user queries, identifying root causes and implementing solutions in a timely manner.
• Participate in the development and execution of test plans for system changes and enhancements.
• Maintain compliance with security standards, ensuring data integrity and confidentiality within the JDE environment.
• Proactively identify opportunities to streamline processes and optimize system performance.

Job Requirements:

• BSc Computer science or similar
• At least 3 years of working experience in providing applications/system support for JD Edwards.
• Working hours: 5 days (Mon-Fri: 8am to 5.30pm)

Job Description & Requirements

Job Description

• In charge of drive test/walk test route preparation following test requirement.

• In charge to conduct drive test/walk test (field measurement) following test cases defined by planning / optimization engineer, and provide correct and valid log file.

• In charge to collect necessary such as radio environment photo and blocking evidence.

• proposed to choose Level 1 experience engineer and include DT/log file analysis as well, DT analysis is hard for the Optimization Engineer to handle alone, DT team can provide the initial findings, while the Optimization Engineer and Senior RF engineer will provide the in depth analysis and proposal

• Have a Good Knowledge with related tools like TEMS/Nemo/Xcal/Gnex.

• Have a Good Knowledge related the Technology such as 2G/3G/4G. Will be added Value if understand 5G Technology

*

Working days: 5,5 days per week

Shift days & hours will be randomly choose when the coordinator make week-schedule, the shift time will be:

Weekdays: Monday – Friday

Day shift: 09.00 – 18.00

Night shift: 18.00 – 09.00

Weekend: Saturday

Day shift: 09.00 – 14.00

Night shift: 21.00 – 02.00

The candidates should be ready and willing to take Work on Height certification

Posted Job Advert

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

The role will lead the timely and successful transfer of the purification stages of the customer’s manufacturing process(es) into the Lonza Singapore production facility. Role will lead the preparation, execution and post-campaign activities for purification stages of the customer’s manufacturing processes at Lonza Singapore production facility. And also lead investigations into process trends to support process monitoring requirements.

Key responsibilities:

• Technology Transfer: Lead the timely and successful transfer of the cell culture stages of the customer’s manufacturing process(es) into the Lonza Singapore production facility. Work with other MSAT team members, technical experts from Lonza’s customer companies and with Lonza Manufacturing (MFG), Quality Assurance (QA), Quality Control (QC), and other departments on the technology transfer.
• Process Support: Lead the preparation, execution and post-campaign activities for cell culture stages of the customer’s manufacturing processes at Lonza Singapore production facility. Become proficient with all processes in the facility and develop ability to support/lead activities for multiple cell lines. Monitor processes on a regular basis to further understanding of process behavior and prospectively identify process issues. Develop ability to generalize issues across cell lines.
• Write change requests and drive to implementation as needed.
• Review cell culture process manufacturing batch records and provide supervision to Manufacturing technical document writing specialists on cell line specific aspects of batch records.
• Identify training needs and design and prepare a variety of training materials for MFG operators on cell culture process batch records. Work with MFG to update process records to enable robust manufacturing operations.
• Support plant start-up and pilot/commercial runs and perform technical investigations and help author technical reports to support close-out of deviations, trouble-shoot process excursions/issues for purification operations.
• Actively engage customer technical experts as necessary to progress technology transfer or process support activities.
• Perform/support experiments in the MSAT small-scale process lab to support process technology transfer or investigations. Follow all applicable lab safety policies.
• Keep current appropriate databases with MFG cell culture process data and analyze to monitor run to run consistency of operations.
• Support inspections and audits by customer and regulatory authorities as required.
• Any other duties as assigned by your Supervisor/Manager.

Key requirements:

• Degree in chemical engineering, biochemical engineering, biochemistry/ chemistry/microbiology or related discipline.
• Extensive work experience in Biotechnology process development, process support, research or a related manufacturing environment.
• Prior hands-on experience in purification experimental technique and equipment.
• Knowledge of Excel as well as Statistical Data Analysis tools.
• Excellent communication skills, outstanding action orientation, and ability to work well in a cross-functional technical environment.
• Excellent technical writing skills, ability to provide attention to detail is essential.
• Demonstrated track record in completing projects under tight timelines.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

· Drafting profiles of metal works according to project requirements;

· Drafting detailed drawings to the appropriate scale for production purposes;

· Shop drawing for projects;

· Submission to authorities and follow up on the feedback;

· Visiting construction sites for work rectification, quantity takings and follow ups;

· Prepare quotations, compute and determine quantities of works required for project;

· Programming of profiles for metal works (on-the-job training provided);

· Coordinating with external parties on the project related matter;

· Provide support to site coordinators, production supervisors and directors in management, development and implementation of projects;

Infosys is a global leader in next-generation digital services and consulting. We enable clients in more than 50 countries to navigate their digital transformation. With over four decades of experience in managing the systems and workings of global enterprises, we expertly steer our clients through their digital journey. We do it by enabling the enterprise with an AI-powered core that helps prioritize the execution of change. We also empower the business with agile digital at scale to deliver unprecedented levels of performance and customer delight. Our always-on learning agenda drives their continuous improvement through building and transferring digital skills, expertise, and ideas from our innovation ecosystem.

Visit www.infosys.com to see how Infosys (NYSE: INFY) can help your enterprise navigate your next.

The Infosys Company Led Training (CLT) is a program in partnership with TeSA, driven by IMDA.

CLT is a structured development program that aims to enable fresh graduates to acquire specialist, expert or mastery-level competencies for jobs in demand by the industry, especially those that support Digital Economy.

If your passion is to build solutions that really make a difference to enterprises, the community and your world, Infosys is the right place for you.

* Selected candidate (Singaporean) will be offered a full-time position with training provided + Joining Bonus.

Roles and Responsibilities:

• Requirements Gathering
• Design
• Architecture
• Development
• Testing
• Implementation
• Warranty
• Transition
• Production Support
• Maintenance
• Knowledge Management

Skills /Competencies:

• Essential: Degree in computer sciences or related.
• 0-3 years of working experience.
• Must be a Singapore Citizen
• Preferred Java programming with SQL database experience.

Additional Skills:

• Be able to think logically and a team player.
• Good analytical abilities
• Strong written and verbal communication skills.
• Attention to detail, good analytical and problem-solving skills

Job Description

What you will do:

• Support and complement the engineering team and sales team in the process design related to refrigeration systems and gas compression systems inclusive of compressor selections with Frick Screw compressors, York multi-wheel centrifugal compressors, and other compressors or chillers for the projects. This includes vessel and heat exchanger design using HYSYS and HTRI software and optimal to have AutoCad 2D experience for P&IDs and PFDs.
• Assume responsibility in providing engineering support for the design of refrigeration systems and gas compression systems for sales and projects, attend HAZOP meetings, and assist the sale and project teams at customer meetings.

How you will do it:

• Design refrigeration systems for various applications and perform a heat balance.
• Prepare P&ID diagrams, equipment layout/piping layout for refrigeration system.
• Size refrigeration equipment such as pressure vessel, heat exchangers, valve and controls
• Able to read and understand project/technical specification and comply to require specification.
• Specify temperature, pressure and differential transmitters, and flow meters along with the instrument engineer.
• Design refrigeration system for cold rooms/chilled water system/glycol system
• Work with different vendors on the selection of third-party equipment
• Able to hold technical discussions with vendors, sub-contractors and customers.
• Frequent site visits to ensure the refrigeration systems are integrated and installed in accordance to original design and provide effective solution for any impromptu design changes.
• Meet or improve the committed submission schedule of engineering documents, and complete assigned tasks within the time frame given, with minimal supervision.

What we look for:

• Diploma / Degree in Chemical Engineering, or equivalent.
• Proficiency in AutoCAD is a must.
• Familiarity with international engineering codes such as ASHAERE/API/ IIAR/ ASME etc
• Minimum 5 years relevant experience, preferably in refrigeration, chemical process, oil and gas (onshore and offshore), food and beverage, or similar industry.
• Experience in engineering software - HYSYS/ HTRI is a plus.
• Knowledge in API is a plus.
• Experience in working with site contractors and vendors on the successful implementation of the refrigeration system design at site.
• Team player, effective communicator, able to build customer relationship and customer satisfaction.
• Able to work independently and have a strong sense of responsibility.

What we offer:

• Competitive salary
• Paid vacation/holidays/sick time
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

A Research Engineer to support the research for developing perception algorithms based on 4D radar. A Research Engineer position is available in the area of sensors perception and platform design in a project that involves simultaneous localization and mapping (SLAM) algorithms and deep learning object detection.

The successful candidate will work with Prof. Danwei Wang and a group of Research Fellows, Research Associates, and Ph.D./Masters/Bachelors students in the school of EEE at Nanyang Technological University, Singapore.

Key Responsibilities:

• Perform research, development, implementation, and experimentation of the perception algorithms based on 4D radar
• Solve problems of robust perception in rainy weathers and expand the usage of the technologies to other weather conditions such as fog and smoke
• Utilize expertise in deep learning, simultaneous localization and mapping to contribute to research activities
• Responsible for algorithms design and implementation
• Conduct place recognition based on 3D and 4D radar fusion
• Develop 4D radar SLAM algorithm
• Collaborate with interdisciplinary teams to integrate radar-based perception into larger systems
• Other engineering support on hardware and software

Job Requirements:

• A Bachelor/Master degree in automatic control, robotics, electrical engineering, etc
• Strong skills in C++, Python, Linux, and experience with ROS, and code management tools (git)
• Experience with algorithms based on different sensors (4D radar, 3D LiDAR, rgb cameras, thermal cameras, etc)
• Familiar with deep learning frameworks (such as Pytorch)
• Experience with deep learning based object detection
• Experience with SLAM and multi-sensor fusion algorithms
• Experience with place recognition based on sensors fusion

Preference will be given to applicants with the following additional skills:

• Has experience in multi-sensor perception and SLAM algorithms.
• Has experience in Lidar, cameras, radar, etc.
• Has experience in projects related to autonomous systems or robotics.

We regret that only shortlisted candidates will be notified.

Responsibilities:

• To prepare engineering documents for approval submission.
• Review comments and make revision if necessary.
• To issue final specification/ BOM for purchase order and issue of PR.
• Negotiate with vendors on terms and condition of purchase.
• To liaise with vendors/ subcontractors for the timely delivery of goods and fabricated or installation
• To coordinate with subcontractors and internal supervisors and contract team for the site installation, testing and construction activities.
• To liaise with the customer and consultant on their engineering request. To attend technical meeting to help resolve technical issues.
• To supervise the Draft person in the production of drawings.
• To actively involved in safety activities, prepare Risk Assessment, Method Statements, Permit to Work to ensure site activities work can conduct in a safely and timely manner.
• To prepare O&M manual for the project.
• To prepare micro schedule and follow through in order to control and ensure timely completion of construction activities.
• Able to work and travel on oversea assignment for short duration.
• Any other task as designated by the management

Requirements:

• Diploma / Degree in Mechanical/Civil/Chemical or equivalent
• Experience in the following disciplines of the fabrication and installation of steel structure works, Stainless steel piping and Square and round Ducting works related.
• Experience to work with heavy lifting equipment and also the preparation of methods statement and also risk assessment

Job Responsibilities

• Leading a Team of Mechanical Design Engineers to execute the Mechanical Design Engineering of the Project which includes preparation of RFQ, Specifications, Mechanical Data Sheet for
• Centrifugal Pumps, PD Pumps, Submersible pumps, Marine Loading Arm, Oil / Water Separator,
• Gangway, Jib Crane, Fire Fighting Equipment, Mixers, Gas Dehydration Package, Air
• Compressor and Dryer Package, Nitrogen Generation Package, Chemical Injection Package,
• Process Filters, Vessels etc. meeting Process Requirement, Client Specifications, Project
• Requirements and all applicable Project Documents to enable Vendors to accurately bid for the supply of Equipment.
• Review & Checking of Mechanical Documents such as RFQ, Specifications, Mechanical DataSheet and Technical Bid Evaluation for Mechanical Equipment to ensure compliance to applicable Codes & Standards and Project Requirements
• Review of Vendor Quotation, Evaluation & Preparation of Technical Bid Evaluation for
• Mechanical Equipment
• Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies
• Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/approvals / resolution of open issues
• Review and Ensures that all works are carried out in accordance with project specification.
• Maintain Design integrity and quality within the Project Engineering Team
• Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.
• Supporting Procurement Team for purchase of Mechanical Equipment
• Review of Vendor Documents post order of all the Mechanical Equipment to ensure compliance to RFQ and other Discipline requirements.
• Co-ordination with construction and commissioning team in resolving site issues.
• Vendor Co-ordination & Procurement Assistance
• Preparation and Compliance for Engineering Audit Requirements.
• Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.
• Technical assistance to construction activities and attending to Site Queries.
• Participates in discipline and inter-discipline design check and screening meetings for
• compatibility, completeness and correctness in works
• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.
• Participate in Bid Clarification Meeting, Kick Off Meeting, Pre-inspection Meeting, Factory Acceptance Test, Site Acceptance Test etc.
• Vendor Shop visit for Work Progress
• Support Construction Team and Commissioning Team for the successful installation and commissioning of the Mechanical Equipment
• To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.
• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.
• Any other ad hoc tasks

Requirements

• Preferably Bachelor’s / Master’s Degree in Mechanical Engineering
• Preferably 10 - 15 years of experiences in Oil and Gas industry Software Requirements
• Good proficiency in MS Excel, MS word, MS Power Point

Code Knowledge

• API 610, API 676, API 682
• ASME Section VIII
• NFPA 20, NFPA 10, NFPA 16
• OCIMF

Job Description:

• Liaise with main contractor on work progress and resolve any daily operational matters.
• Responsible in planning and preparing weekly/monthly report on the progress of work.
• Coordinate with various departments to ensure smooth operation of work.
• Handling required documentation for clients submission.
• Provide techinical support to clients
• Other related duties as assigned.

Job Requirements:

• Certificate in Engineering is preferred
• Minimum 2 years of Project Management knowledge, skills, experience.
• With autocad skill is advantage.
• Good interpersonal and communication skill
• Good organization skill
• Able to multitask
• Able to work under fast paced environment.

Responsibilities:

• Assisting with maintenance & operational responsibility for day-to-day health including Storage, Server, and backup services.
• Performing daily operational procedures, on the facilities including routine check of the facilities.
• Tape change management, operation and support.
• 24x7 monitoring of all operational systems & network components, responsible for event detection & escalation
• Diploma in IT or Computer and related fields with at least 5 years of related experiences
• Must be willing to do 12 hours shift work (Day and Night rotating)
• Must be willing to be on 24x7 standby (on rotation basis)

Job Description:

- Assist Centre Head and supervise a team of technicians in delivering technical advices/support to the various business units

- Actively involved in job estimation and WIP (Work-In-Progress) tracking

Interpret circuitry diagrams and PCBs for any re-engineering work required

- Work with engineering support section on product design, tester design, maintenance service and implement hardware and software components to integrate into in-service systems

- Manage and supervise the maintenance, repair and overhual (MRO) tasks allocated to the section in supporting commercial products, proprietary and non-proprietary defence products

- Deliver allocated and ad-hoc tasks within stipulated timeline and cost

- Understand the concept of Reliability & Maintainability (R&M) tools such as FMEA so to achieve improvement in MRO effectiveness, reduced manpower requirements and minimized life cycle cost

- Conduct and lead failure investigations and prepare reports for problems or issues based on findings from facts, researches,studies and make necessary recommendations

- Submit investigation reports to relevant authority for approval

- Generate documents and engineering process plans to ensure operation requirements and safety standards are maintained

- Conduct technology search for MRO applications and introduce technology enablers to improve performance and quality of the repaired systems or components

- Participate in Customer meetings to gain insights to their needs and expectations, translating these requirements into deliverables where feasible

- Responsible for the training of technicians; planning, assigning, and directing work to a group of technicians; appraising, addressing complaints and resolving conflicts

- Perform other related duties as assigned

Job Requirements:

- Bachelor in Engineering (Electrical & Electronics)

- Experience in PCB and schematic design work

- Experience in effectively leading a team of Technicians

- Experience in SAP System, Automotive or Military Land System is advantageous

- Strong fundamental knowledge in Digital and Analog Electronics

- Knowledge in Microcontrollers, FPGAs and CPLDs

- Ability to read and interpret schematics and datasheets

- Strong technical skills in troubleshooting PCBs

Capable to use electronic tools such as multimeter, oscilloscope, digital analyser, function generator, etc

- Possess strength to comprehend, analyse and present facts and figures

- Ability to embrace challenges and apply critical thinking to resolve arising / urgent matters without losing overall business focus

- Good analytical and problem solving skills

- Good communication skills and a strong team player

- Able to work under pressure and tight timeline

Independent, highly motivated, meticulous, resourceful and possess a positive attitude