As part of IME Integrated Circuit Design and System Department, we are seeking a candidate with relevant experience in analog integrated circuit design. This candidate will contribute to developing analog circuit blocks e.g. low-power operational amplifiers, voltage/current references, and voltage regulators based on thorough topology analysis. This candidate will work closely with other team members for the circuit design, test verification, as well as system integration and validation for a broad range of innovative sensor systems.

Role & Responsibilities

• Circuit schematic design and simulation, layout supervision, pre-tapeout design verification, test plan development and chip measurement
• Work together with teams to investigate novel circuit/system solutions to create new inventions

Requirements

• Bachelor’s / Master’s degree in Electronic Engineering
• Good understanding of CMOS analog IC design methodologies
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Able to generate high-quality scientific publications and patents
• Team player, quick learner and self-driven

Job Description:

• Support start-up, contract maintenance and other service activities with emphasis on safety and protection.
• Perform routine preventive maintenance, logging, corrective maintenance works and to carry out warranty repairs.
• Participate in service and repair of gas detectors, safety activities, emergency response, breakdown calls and ad hoc projects.
• Ensure equipment turnaround and breakdown responses are achieved at optimal level of efficiency.
• Manage all orders efficiently until fulfilment stage, by working closely with Service team.
• Liaison with relevant parties such as customers, service supervisor, coordinators and logistic pertaining to queries, technical issues, status and deliveries.
• To participate/take up Workplace Safety & Health responsibilities/ activities as per requested by the company.

Job Requirements:

• NTC2 or Diploma in Electrical/Electronic/Process Instrumentation / /Mechatronics Engineering
• Preferably experience in service/engineering position in Oil & Gas / Process industry

Interested candidates do attach your resume to [email protected]

Attn: Angela Celeste Poh Li Ying (R2095367)

Recruit Express Pte Ltd (99C4599)

Jobscope

• Install and configure gas detection systems at customer sites.
• Assess and determine the best locations for sensors.
• Regularly maintain and calibrate gas detection equipment to ensure accuracy.
• Perform preventive maintenance to avoid equipment breakdowns.
• Diagnose and fix issues with gas detection systems, including hardware and sensor problems.
• Repair or replace faulty components.
• Provide on-site and remote support to customers for system issues.
• Train customers on the correct use and maintenance of equipment.
• Other ad hoc duties assigned by supervisor

Requirements

• NTC2 or Diploma in Electrical/ Electronic/ Process Instrumentation / Mechatronics Engineering
• Can take Fresh grads with Experience in oil & gas or process industries as training will be provided
• Preferably 3-5 years’ experience in service/engineering position in Oil & Gas / Process industry.
• Knowledge in Electrical & instrumentation is preferred
• Work experience in Process Instrumentation is a plus
• Possess a valid class 3 license - Must be able to drive manual van

All qualified applicants, please send in your resume to:

[email protected]

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Job Responsibilities:

• Implement, maintain, and manage network, operating systems, storage, and backup solutions.
• Collaborate on system development tasks, including design, implementation, integration, and testing.
• Provide 24/7 on-call support for systems on a rotating schedule, implementing corrective measures to address production issues and reduce unplanned outages.
• Create and maintain programmatic and technical documentation to ensure effective planning and execution.
• Coordinate with external parties and customers to resolve issues.

Requirements:

• Diploma / Degree In Computer Science, Computer Engineering , Information Technology or related field
• 3 - 5 years working experience
• Knowledge of IT infrastructure, including operating systems and networks
• Enthusiastic about new technologies and eager to learn new skills
• Strong team player with the ability to work independently
• Capable of managing stakeholder relationships
• Candidates with one or more of the following skills will have an advantage:Networking skills or CCNA certification
  Experience with VMware NSX
  Proficiency in virtualization technologies (VMware, vSphere)

HOW TO APPLY:

Interested applicants, please click on “Apply Now” and provide the below details in your resume.

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Nyon Hock Sen
EA Personnel Reg No: R24124070

Why Join Us?

• Attractive Newcomer Bonus
• Career Progression & Development Opportunities
• Opportunity to Work Alongside an Innovative Team
• Comprehensive Leave Packages (e.g: additional leave, birthday leave, eldercare leave, etc...)
• Executive Health Screening

Job Responsibilities:

• Develop, maintain and manage working relationships with clients and all related parties.
• Manage and implement overall project.
• Coordinate with Project Manager on project matters
• Supervise and provide advice to junior Project Engineer(s)
• Check working drawing, identify discrepancies for resolution
• Keeping track on variation and claims of contract
• Perform project cost review on a regular basis and on identified areas.
• Plan and manage project schedule to ensure timely delivery.
• Perform incoming inspection on project materials delivered on site by suppliers or vendors.
• Site coordination with subcontractors, supervisors and clients.
• Ad-hoc duties as assigned by superior(s).

Job Requirements:

• Degree in Civil & Structural Engineering (Certificates must be recognized by PE Board).
• Has relevant experience in infrastructure projects, e.g. roads and rail projects
• Possess skills, knowledge and ability to supervise and manage project effectively
• Independent, resulted-oriented and self-driven team player with good communication skills
• Class 3 driving license will be added advantage.

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Responsibilities

• Undertake detailed design in Building Structures
• Execution of projects and liaison with the Client, Client’s Consultants, Contractors, and authorities to provide technical support for design
• Checker to obtain approval of design and drawings
• Prepare design report & attend meeting to resolve technical issue

Requirements

• Degree in Civil and Structural Engineering or its equivalent that is recognized by the Professional Engineers Board of Singapore
• Well versed with local authority codes and regulations
• Minimum 4 years of relevant building structure with civil experience
• Involve in large scale building (HDB/ Condominium/ Commercial) structural design project
• Good exposure in the analysis and design of PPVC, Precast and concrete structures, steel structures
• Good knowledge of the various engineering design software and analytical tools
• Applicant who has lesser experience will consider for Engineer role

Responsibilities:

• Assists in preparing Work Plan and manpower requirements based on the Work scope / Specification
• Delegates job to supervisors and plan manpower required for jobs in accordance to the budgeted man-hours
• Coordinates between the different trades and resolves problems encountered in project
• Reads and interpret Piping ISOMETRIC Drawing /P&ID Drawings
• Prepares Material Take-Off (MTO) based on Piping ISOMETRIC Drawing /P&ID Drawings
• Utilizes different pipe welding materials
• Raises and approve Purchase Request for materials and equipment required for the jobs accordingly
• Monitors work of sub-contractors to ensure that quality and workmanship conform to company standards
• Ensures all standard operating procedures comply with specifications, quality standards, statutory and regulatory requirements

Requirements:

• Bachelor’s degree in Engineering/ Marine Engineering or related engineering disciplines
• Minimum 2 years of relevant working experience in piping discipline
• Able to multi-task and able to work in a fast-paced environment
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Occasional short-term overseas visit or inspections as per project requirements
• Good in planning, analyzing, communicating and independent work
• Excellent proficiency in English (written and spoken)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

• Bachelor's degree in Electrical Engineering, Mechanical Engineering, or a related field
• 5+ years of experience in instrumentation and control system design, analysis, and implementation
• Proficiency in using CAD software for control system design
• Experience with control system programming and software tools such as PLC programming, DCS programming, or SCADA systems
• Knowledge of codes, standards, and regulations related to instrumentation and control systems, such as ISA, IEC, and NEC
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• Experience with industrial processes and equipment, such as pumps, motors, and valves, is a plus
• Professional Engineering (PE) license is preferred

Hydroleap is a Singapore-grown water treatment startup backed by governmental and private VCs. Seek to displace chemical pretreatment processes with proprietary, IoT-enabled electrical treatment technology. Hydroleap's deep technical expertise allows us to design modular electrical treatment processes and deliver end-to-end wastewater treatment systems, offering solutions that are automated, robust, cost-effective, and environmentally friendly.

Backed by reputable governmental and private venture capitalists (VCs) such as Wavemaker, Enterprise Singapore (Seeds Capital & SGInnovate), 500 Startups, Sparklabs Cultiv8, Entrepreneur First and a few more.

Your Key Responsibilities

The role of the Research Engineer is consisting of carrying out research programs while observing the objectives defined by the business division. To support R&D activities in wastewater treatment, and environmental control system.

Your Key Responsibilities

● Engaging R&D and product development activities to enable new product introduction and improvements.

● Design product and system prototypes to receive feedback and identify areas of improvement through R&D studies.

● Assisting the operation team to identify and troubleshoot the technical problems associated with the products.

● Involving mainly in R&D department and working closely with the rest of the technical, business, production, and operation teams for designing, manufacturing and implementation of innovative water and wastewater solutions.

● Evaluate alternatives, resolve technical issues and interface with other disciplines.

● Ensure technical accuracy, standard engineering practices and inclusion of appropriate documentation on various report and design project.

● Ensure good housekeeping in the laboratory and pilot plant and be responsible for the safety and environment compliance of the new processes.

● Perform other duties as needed.

Your Capabilities and Credentials

● Skilled in report and technical writing, organization, analytical and verbal communication.

● Demonstrated proficiency in problem solving and risk management.

● Experience in decision making, identifying, assessing, evaluating, and solving complex problems.

Education and Experience

● B.S Degree in Chemical or Environmental Engineering required.

● Minimum 1 year of work experience/internship experience in water treatment-based industry.

● Strong communication, skilled in report and technical writing, organization, analytical and interpersonal skills.

● Self-starter with ability work together with team members.

● Background will ideally include project work and process knowledge of water and wastewater treatment plant.

● Have enthusiasm for R&D work.

We thank all applicants for their interest, however, only those candidates selected for interviews will be contacted.

Hydroleap is a Singapore-based deep tech startup with a mission of disrupting the wastewater treatment industry. Our cutting-edge electrochemistry technology and innovative approaches to water and waste management have eliminated the need for manual interventions and toxic chemicals, making our solutions fully automated, cost-effective, and environmentally friendly helping industries to be more water and energy efficient.

With multiple successful deployments across the Asia Pacific region, including in the agri-food, oil & gas, data center, desalination, and construction sectors, Hydroleap is significantly impacting how water and wastewater are treated. As a company, we are proud to be backed by an impressive group of governmental and private venture capitalists, such as UntroD Capital, Mitsubishi Electric, Seeds Capital, State Government of Victoria, Wavemaker Partners,, 500, SGInnovate, Sparklabs, and Entrepreneur First.

Join our team and be a part of a mission-driven organization that is changing the world, one drop of water at a time.

Who we are looking for

The Project Engineer will be responsible for supporting the technical execution of water and wastewater treatment projects. You will work closely with senior project team members, ensuring that engineering aspects are met and project milestones are achieved.

What you will be doing

• Assist in the design and development of water treatment and wastewater projects.
• Support project execution through technical evaluation, analysis, and recommendations.
• Prepare project-related documentation including technical reports, specifications, and drawings.
• Conduct site inspections and monitor engineering performance on project sites.
• Collaborate with the project team to troubleshoot issues and implement solutions.
• Support the project management team in ensuring projects are delivered on time and within scope.
• Provide input for process optimization and continuous improvement in project design.
• Perform other duties as needed.

Your Capabilities and Credentials

• Strong interpersonal skills and emotional intelligence.
• Skilled in report and technical writing, organization, analytical and verbal communication.
• Demonstrated proficiency in problem-solving and risk management.
• Experience in decision-making, identifying, assessing, evaluating, and solving complex problems.
• Demonstrated successful experience in leadership.
• Strong project management skills, with experience in organizing, planning, and executing projects from pursuit through closeout, involving internal disciplines, contractors and vendors.

Education and Experience

• Bachelor's Degree in Chemical, Environmental, or Mechanical Engineering required.
• 1 to 3 years of progressive experience within a water/wastewater treatment environment with thorough knowledge of methods, techniques, principles, and practices of water/wastewater treatment, water distribution, and wastewater collection.
• Strong communication, skilled in report and technical writing, organization, analytical and interpersonal skills.
• Self-starter with the ability to lead and manage team members and projects.
• The background will ideally include project work and process knowledge of site work, hydraulics, pipeline, and water/wastewater treatment.
• Project Management Profession (PMP) is preferred.
• Strong PC skills with proficiency in word processing, spreadsheet, database, and the ability to optimize the use of technology and systems to communicate, manage budget and to streamline processes, and increase efficiency.
• Preferable with a valid driver’s license of class 3.

Job Description:

• Experienced in structural engineering design works mainly for road/viaduct projects.
• Supervision of drafting for the preparation of project documentation.
• Prepare designs, sketches and reports with supporting calculations for projects, and supply drafting staff with information to assist in the production of detailed drawings, the development of quantities, materials lists and cost estimates as required.
• Assist in the preparation of technical detail for quotations, contract documentation and technical specifications.
• Prepare technical submissions for materials, construction methods and C&S shop drawings.
• Liaise with suppliers, clients, consultants or commissioning engineers concerning the design, installation or construction and commissioning of assigned work.
• Participate in the planning of projects as required.
• Previous experience in the use and application of Appropriate Singapore local and international Standards for structural design.
• Attend site inspection with required

Job Requirement

• Bachelor of Engineering (Civil) with minimum 5 years of structural engineering experience.
• Good knowledge of the various engineering design software, for instance Autocad, BIM
• Experienced in LTA projects would be advantage.
• Excellent written and verbal communication skills with an excellent eye for detail.
• Team Player.
• Meeting delivery deadlines and budgets.

JOB DESCRIPTION

Report to Project Manager / Site Manager for the Arrangement of work

Liaise with consultants for the submission and approval of materials and shop drawings

Responsible for planning, programming and monitoring of work progress on site Co-ordinate the inspection work by Resident Engineer and clerk of works

Handling technical and engineering problems on site

Ensure site safety and proper execution of site work procedure on site

Monitor and co-ordinate the works of subcontractors Structure and Architectural work

Requirements:

Civil Engineer preferably registered with PE Board

Min 1 – 2 years’ experience

Who We Are

We are an Artificial Intelligence (AI) technology backed by Shell, one of the world's leading energy companies, dedicated to tackling the most complex issues in the energy sector through groundbreaking research and development in AI and Data Science. Founded in Singapore, our ultimate goal is to establish ourselves as the leading hub for AI and Data Science R&D in Southeast Asia.

We are looking for a Software Engineer to join our dynamic team. As a Software Engineer, you will work on designing, developing, and improving key components of the technology stack related to AI, data engineering, high-performance computing (HPC), and geophysics, among other specialized topics. We are looking for people from various development backgrounds but most importantly someone who is passionate about solving challenging problems and can think out of the box.

Responsibilities

• Design, develop, and improve key components of the technology stack in high-paced, high-impact real-world projects.
• Apply the technology to real work and high-impact client projects.
• Maintain high code quality standards and be accountable for the work delivered.

Requirements

• Bachelor's or Master's degree in Computing, Science, or Engineering with 2 years of software development experience.
• High proficiency in Python is a must. Experience in C, C++, Rust, or other programming languages is a plus.
• Good aptitude for abstract thinking and problem-solving. Good understanding of complex algorithms and data structures.
• Experience is required with essential development tools such as Git, Linux Shell Scripting, Vim/Emacs, etc.
• Experience with parallel computing, system programming, full-stack development, and web development can be a plus.
• Ability to work effectively in a fast-paced environment with high expectations.

Benefits

Why Join LRD?

LRD offers a conducive work environment in a company culture that values authenticity, integrity, technical skills, teamwork, and results. Here are some of the opportunities offered by the position:

• You are always presented with new challenges to solve intellectually stimulating problems. The work never gets stale, mundane, or boring.
• Continuous learning opportunities to develop your technical expertise in many subfields of AI, ML, HPC, Geoscience, Engineering, etc.
• Your work will have an immediate impact on high-impact real-world problems such as natural resource exploration and energy security.
• Have your work recognized with publication opportunities in top scientific conferences and journals.
• Be rewarded for your contributions with high-performance bonuses well above the market rate.
• Friendly and casual working environment.

Why Join Us?

• Attractive Newcomer Bonus
• Career Progression & Development Opportunities
• Opportunity to Work Alongside an Innovative Team
• Comprehensive Leave Packages (e.g: additional leave, birthday leave, eldercare leave, etc...)
• Executive Health Screening

Job Responsibilities:

• Assist Project Manager on project matters.
• Coordinate with subcontractors, supervisors and clients on site matters.
• Execute, monitor and ensure the project completed on time.
• Maintain work quality according to specification and requirement.
• Check drawing for accuracy and completeness for construction.
• Maintain inspection records of works, materials and all completed works.
• Implement cost control measures to meet project budget.
• Ensure the site operations comply with project quality plan, environmental and occupational safety and health.
• Ad-hoc duties as assigned by superior(s).

Job Requirements:

• Degree in Civil Engineering or equivalent; certification must be recognized by PE Board
• Has experience in infrastructure projects, e.g. roads and rail projects
• Possess skill, knowledge and ability to supervise and manage project effectively
• Independent, resulted-oriented and self-driven team player with good communication skills

We are looking for an Executive Engineer to join our team in Singapore office. You will have opportunity to work on interesting projects across wide-ranging sectors and typologies.

Your responsibilities include:

• Conceptualise engineering design and execute the project with the detailed designs.
• Oversee project management including overall responsibility over resources, time allocation, cost, and quality of project deliverables.
• Manage and engage client/consultant/ contractors and local authorities to drive project execution, resolve issues, submission to authorities and overall on-site construction supervision.
• Develop good working relationships with clients and partners in the industry.

What you will need:

• A recognised degree in Civil Engineering from a university recognised by the Professional Engineers Board of Singapore.
• At least 3-5 years of experience in design and project management of HDB public housing projects.
• Strong technical proficiency in engineering analysis and design programmed. Knowledge in BIM will be an advantage.
• Conversant with local authorities’ requirements and submission procedures.
• A good track record of being a project / technical lead for significant / key projects.
• Strong oral and written communication skills, stakeholder management skills.

JOB SCOPE:

i. Part of integral product team to develop aircraft modification designs and repairs.

ii. Require close interaction with engineers from other disciplines to achieve an optimized and cost-effective design solutions within the stipulated project schedule

iii. Responsible for assessing the aircraft’s structural adequacy by performing various analysis, including:

• Static strength analysis,
• Fatigue and damage tolerance analysis.

iv. Perform structural analyses using either classical methods and/or finite element approach

v. Ensure adherence to airworthiness regulations, relevant design principles, processes, methods and manufacturing capabilities guidelines.

KEY PROJECT(S)

• A320 P2F and A330 P2F new initiatives and serial production support

PREFFERED SKILLS:

1. Strong understanding in structural analysis.
2. Proficient with CAD tools such as CATIA V5 or similar for simple modeling tasks.
3. Proficient in finite element analysis.
4. Able to work as a team.

Job Description

• Develop and submit method statements for EMS and related activities prior to tunneling.
• Monitor the EMS full-time during tunneling operations.
• Establish and implement primary and secondary muck reconciliation methods, such as muck pit measurement and belt weigher measurements, Fines calculation
• Prepare shift reports for EMS, including results of primary and secondary muck reconciliation for each ring built.
• Investigate breaches of upper and lower muck limits and document findings in shift reports.
• Monitor trend graphs of deviation flow, total volume, dry volume, dry mass etc.
• Coordinate with Tunnel Engineers, TBM operators, and STP operators to ensure smooth operation.
• Conduct regular inspections and calibrations of EMS equipment to ensure proper functioning and adherence to safety and quality standards.
• Analyze data trends and provide recommendations for optimizing tunneling efficiency and minimizing downtime.

Job Responsibilities

• Minimum 5 years of experience in tunneling works
• Diploma or bachelor's degree in Civil Engineering or related field.
• Good communication, proficient in both written and spoken English.

Responsibilities:

• Lead and direct cross-functional team in program execution
• Ensure proper qualification of new projects and successful implementation of programs in the production/manufacturing unit
• Track and monitor project progress to ensure project schedules and cost objectives are met
• Actively follow on sales leads and take lead in business development
• Serve as primary technical contact with customers on strategic or politically sensitive issues
• Generating quotation for molding projects involving new toolings
• Work with Manufacturing on developing and establishing workflows and production concepts (to optimize production efficiency &meet customers’ requirements)
• Identify and specify engineering requirements for new projects
• Initiate equipment procurement activities for new projects when needed (with Purchasing)
• Plan and execute tooling qualification activities with supporting groups to achieve successful project execution
• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Preferably 3-6 years of relevant experience with a Degree in Mechanical Engineering or equivalent qualfications
• Experience in managing healthcare products
• Good knowledge of project management & production process
• Strong communication skills, organizational and planning abilities
• Independent, good initiative and able to multi-task in fast paced environment

Interested candidates may send their CV to Caris (Reg No. R1109826) at [email protected] quoting the job title in the Subject line. We regret that only shortlisted candidates will be notified.

RESPONSIBILITIES:

• Generate layout drawings, procedures, and technical specifications.
• Draft comprehensive scope of work for all mechanical engineering tasks.
• Produce technical specifications, requisitions, and detailed drawings (including plans, elevations, and arrangements).
• Coordinate engineering designs and manage interface-related issues.
• Strategize, develop, and innovate new products in alignment with project requirements.
• Enhance existing product designs for optimal performance and efficiency.
• Offer technical expertise to bridge the gap between product design and manufacturing processes.
• Lead and oversee investigations into the form and function of design features.
• Develop and refine technical drawings of mechanical parts and assemblies to convey design intent and guide manufacturing processes.
• Create communication documents to effectively convey design details to clients or manufacturing partners.
• Establish and maintain design history files for documentation and reference purposes.
• Validate system and product capabilities by designing and conducting feasibility studies and testing methods.
• Innovate manufacturing processes by designing and adapting equipment for component fabrication, assembly, and installation.
• Ensure system and product quality through the design and implementation of testing methods; verify finished product and system capabilities; validate fabrication, assembly, and installation procedures.

REQUIREMENTS:

• Hold a Bachelor's Degree in Mechanical or Mechatronics or any related field in Engineering.
• Possess a minimum of 5 years of experience in Engineering and Product Design, specifically in pressure vessels.
• Proficient in SolidWorks with a strong understanding of AutoCAD 3D or equivalent software, as well as valve differential designs.
• Familiarity with NFPA and relevant international pipeline design Codes and Standards is essential.

Job Purpose

We are seeking a talented and experienced Project Engineer to join our dynamic team. The successful candidate will play a pivotal role in the successful execution of EPC and ECPM construction projects. You will be responsible for overseeing all aspects of project engineering, from planning and design to construction and handover.

Key Responsibilities

• Develop and maintain project schedules, budgets, and resource plans.
• Coordinate with engineering, procurement, and construction teams to ensure project deliverables are met on time, within budget, and to the required quality standards.
• Conduct site inspections and monitor project progress to identify potential risks and develop mitigation plans.
• Prepare and manage project documentation, including contracts, change orders, and progress reports.
• Ensure adherence to safety, health, and environmental regulations.
• Collaborate with clients and subcontractors to establish and maintain effective relationships.
• Identify and implement process improvements to enhance project efficiency.

Qualifications

• Diploma or Bachelor's degree in Mechanical Engineering or a related field.
• Proven track record in managing complex construction projects.
• Strong knowledge of engineering principles, construction methods, and project management tools.
• Excellent problem-solving and decision-making skills
• Strong communication and interpersonal skills.

Required Skills

• Excellent leadership and team management abilities
• Strong technical skills in ACMV engineering works
• Proficiency in MS Excel and other relevant software for quotation preparation
• Ability to create clear and comprehensive work method statements
• Strong written and verbal communication skills
• Excellent problem-solving and decision-making abilities
• Good project management and organizational skills
• Customer service oriented with the ability to build and maintain client relationships
• Cooperative
• Mobility : As when needed
• Further Training: Managing WAH, Bizsafe L2, CSCPM

Personal Attributes

• Detail-oriented with a strong commitment to quality
• Proactive and able to work independently
• Adaptable and able to work under pressure
• Safety-conscious with a strong focus on workplace safety
• Good interpersonal skills and communication skills

Job Description:

• Facilitate all software modifications and upgrades as part of the software maintenance to upkeep smooth operations of the system.
• Prepare and review SUCOs / SARs (Access request approval) before obtaining approval from customer
• Reports to O&M Manager & Assistant Manager.
• Deliver service and support to the O&M Team when requested.
• Attend to and manage all software or hardware related errors.
• Work closely with System Administrator to resolve software and hardware related issues.
• Diagnose and resolve technical hardware and software issues involving BHS Application, network connectivity and more.
• Gather information and determine the issue by evaluating, analyzing and isolating the details/symptoms.
• Follow standard processes and procedures.
• Identify and escalate priority issues.
• Redirect problems to appropriate resource.
• Reviews all system occurrences to prevent recurrence.
• Coordinate and follow up with Hotline on all reported cases and communicate to the customer where necessary.
• Interact with the customer to provide and process information in response to inquiries, concerns, and requests about products and services.
• Provide guidance and training to CC room staff on all software related matters.
• Carry out training to staff and conduct practical test during off peak period.
• Coordinate with local equipment supplier/vendors (system related).
• Perform periodically review of system logs, operations report and follow up on action plans.
• Review monthly operations statistics together with the Manager.
• Provide monthly system performance analysis and generate required reports for stakeholders
• Develop and maintain installation and configuration procedures where necessary.
• Maintain operational, configuration or other procedures where necessary.
• Schedule & deploy firmware updates & patches for equipment (Servers and Network devices) with vendors.
• Stay current with system information, changes, and updates.

Requirements:

• Degree in Computer Science, Engineering or equivalent.
• Certifications in supporting relevant technologies such as MCP, MCSE and CCNA will be a definite advantage.
• Diploma in Computer Science or Engineering, or its equivalent, with relevant experience of at least 7 years will also be considered.
• Experience in maintaining automated baggage handling systems or automated systems in material handling industries preferred.
• Experience in a control room environment preferred.
• General understanding of the underlying operating system, e.g., VMware, Windows and Linux.
• General understanding of storage technologies, memory management, disk arrays, NAS/SAN, networking.
• Must be a strong team player and able to work independently, with curiosity and strong problem-solving skills.
• Able to travel overseas if required.
• Possess strong communication skills in English.

Key Responsibilities:

• Develop and implement improvement process to streamline internal operations and enhance production efficiency to achieve cost effectiveness.
• Collaborate with various production teams to minimize manufacturing errors, reduce waste, and prevent product defects, thereby improving overall product quality.
• Design and oversee operation mechanisms to ensure optimal production efficiency and smooth workflow.
• Generate innovative solutions to improve process capability, increase throughput, and eliminate bottlenecks.
• Define parameters and lead the digitalization of productivity data, with a focus on integrating IoT between equipment and dashboards.
• Investigate and resolve quality issues, both internal and external, to ensure compliance with regulatory and company standards.
• Lead and contribute to various ad-hoc projects, offering technical expertise to support cross-functional teams.
• Proactively monitor, identify, design and refinement of Standard Operating Procedure and improvement in processes.
• Support and participate in company continuous improvement program.

Job Requirements:

• Minimum Degree in Engineering (Industrial, Mechanical, Electrical, Chemical, Process, Precision, etc.), Computer Science, or other relevant discipline is required.
• Preferably with at least 2 years of experience in a manufacturing environment.
• Strong academic performance are welcome to apply and will be considered for a Management Trainee role.
• Proficiency in statistical software is advantageous.
• Familiarity with production control, quality management systems, data analysis, and statistical process control is preferred.
• Strong analytical and communication skills are essential.
• Self-motivated and capable of thriving in a team-oriented environment.
• Must demonstrate a “willingness and curiosity to learn,” as training will be provided.

We regret that only shortlisted applicants will be notified.

Job Title: Automation Engineer (No-Code Tools)

Location: [Singapore]

Type: Full-Time, Hybrid Work Arrangement

Company Overview:

We are a dynamic startup automation agency dedicated to transforming businesses through innovative no-code AI solutions. As we expand our offerings, we are seeking enthusiastic individuals ready to learn and grow with us. Our environment is fast-paced, collaborative, and committed to excellence.

Job Summary:

We are looking for a motivated Automation Engineer who will be instrumental in implementing and managing automation processes using no-code platforms. This role is ideal for individuals with a foundational understanding of AI who are eager to develop their skills in the AI and automation space without the need for coding expertise.

Key Responsibilities:

• Design, build, and maintain automation workflows using no-code tools such as Make and Zapier.
• Work closely with process analysts to understand and map business processes for automation.
• Test and refine automation systems to ensure efficiency and accuracy.
• Provide support and troubleshooting for existing automation setups.
• Collaborate with team members to integrate automation solutions across various business functions.
• Stay updated with the latest trends and updates in no-code automation technologies.
• Participate in training sessions to enhance skills and assist in training other staff members as needed.

Requirements:

• Basic knowledge of AI and its applications in business; formal training in AI is a plus but not required.
• Strong problem-solving skills and the ability to think analytically.
• Excellent communication and interpersonal skills.
• No previous coding skills required.
• A proactive attitude and willingness to learn and explore new technologies in the AI and automation domains.
• Experience with no-code platforms such as Make and Zapier is advantageous but not mandatory.

What We Offer:

A chance to be part of a growing startup focused on cutting-edge automation solutions.

Comprehensive training in no-code automation tools and techniques.

A supportive environment where curiosity and continuous learning are encouraged.

Competitive salary and benefits.

Flexible hybrid work arrangements, combining remote work with office days.

AYE SUCCESS

Lic no. 10C5753

Job Description

• Undertake design for road and drainage, including long section and cross section of permanent and temporary stages
• Study and propose utility diversion for permanent and temporary stages
• Assist in developing the specifications and tender documents, cost estimates, calling tenders and tender evaluation.
• Undertake design development, prepare technical reports and supervision of roads and utilities works for infrastructure projects.
• Communicate with clients, sub consultants, approving agencies, etc, for purposes of obtaining information and approvals.

Requirements

• Recognized Degree in Civil Engineering, Transportation Engineering or Traffic Engineering
• Preferably at least 3 years of practical experience in road design, traffic management and road safety engineering. Experience in roadside drainage and traffic is an advantage
• Proficiency in Microstation and InRoad / InRail programme will be an advantage
• Good command of English
• Team player with good interpersonal and communication skills
• Analytical, resourceful, self-motivated, independent and diligent