• Review and interpret construction drawings, method statements, and risk assessment forms for job and tender submissions.
• Serve as the main liaison between the site office and headquarters to facilitate the integration of e-invoicing systems.
• Coordinate with various departments to ensure seamless communication and workflow.
• Assist in promotional and marketing initiatives to revamp the company's corporate website.
• Ensure compliance with all relevant regulations and industry standards.
• Maintain accurate records and documentation of all site activities and communications.
• Strong understanding of construction drawings, method statements, and risk assessments.
• Experience with integrating e-invoicing systems is preferred.
• Background in promotional or marketing activities.
• Excellent communication and interpersonal skills.
• Proficient in Microsoft Office Suite and relevant industry software eg. Asurix.
• Ability to work independently and collaboratively within a team.
• Strong organizational skills and attention to detail.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Job Description

• Interpret contract specifications, architectural standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manage budgets; write reports; and carry out additional administrative duties associated with the projects that are allocated
• Oversee architectural planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise and prepare construction and architectural documents and drawings
• Oversee architectural projects, communicate with clients and subcontractors regarding architectural issues, and guarantee the highest levels of architectural workmanship
• Provide the architectural designers with technical guidance on building requirements
• Organize and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in engineering
• Min 3 years of construction experience

Overview / Responsibilities

The Facilities Cost Benchmark is responsible for developing a comprehensive construction cost and management to achieve long-term Micron goals.

The role will be managing and supporting Micron construction projects cost from planning through closeout, including scoping, pre-planning, design, construction administration, Facilities budget cost benchmark management with different Micron site.

Responsibility includes budget cost managing & improving of new project planning business process. Gathering, analyzing & benchmarking Micron current manufacturing sites & construction projects, providing accurate & timely information to project evaluation team. Facilities Cost Benchmark also has another important responsibility is to evaluate the global semiconductor factory construction cost comparison.

Responsibilities

• Manage and lead new construction project cost process.
• Establishing project objectives, scope and deliverables in collaboration with stakeholders and ensuring alignment with requirements.
• Prepare new project Cost & schedule report & long-term plan reports for management review.
• Developing and managing initial project schedules, budgets and resource allocations to ensure cost efficiency and timely delivery.
• Maintain effective communication with project team members and relative stakeholders to provide project updates, address concerns and foster strong working relationships.
• Ensure Roles, Responsibilities and Accountabilities are fully understood by the participated teams
• Collect, classify, evaluate data and information used in supporting the new Micron construction project planning evaluation request.
• To evaluate the global semiconductor factory construction cost comparison.

Skills / Qualifications

Minimum Qualifications:

• The candidate should possess a BSc or Beng in Engineering from a recognized institute of higher learning.
• Experience in Master planning & project planning is thus highly valued.
• Candidates with experience in facilities operation & construction.
• Minimum 5 years of budget and cost management experience.
• Good analytical skills with problem solving aptitude.
• Skills in excel and simple code writing desired.
• Ability to integrate and work in a global multicultural team
• Great leadership, interpersonal skills and team building spirit.
• Excellent communication skills, both written and verbal.

Minimum Experience & Skills:

• Candidates with experience in Fab or facilities construction and operations.
• Demonstrable experience in the construction or semiconductor project cost management and/or other relevant industries is strongly preferred.
• Strong financial understanding and experience in project budgeting and cost control.
• Strong communication skills, as well as the ability to visualize issues and communicate them to others.
• Outstanding organization, coordination and leadership skills – ability to coordinate and motivate TMs from multiple sites and different background.
• Ability to work collaboratively and pro-actively in a team environment.
• Moderate skill in excel and simple code writing desired.
• Effective delegation skills.
• Experience in managing large-scale construction projects.
• Language: Chinese, English. Japanese would be preferred.

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

RF Unit

• Disassemble RF unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Network Analyzer
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation
• Knowledge of Smith Chart

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design. To be cost-effective, the whole outturn cost of the design solution must be considered, including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall have Excellent knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff.
• The candidate shall assist in ensuring a safe working environment for all staff.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The candidate shall have at least 8 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind, with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Documentation Management:

· Create and maintain project files, documents, and records.

· Organize and categorize project-related materials for easy access.

· Ensure that project documentation is up-to-date and accurate.

Scheduling and Planning:

· Assist in creating project schedules and timelines.

· Coordinate meetings, appointments, and project-related events.

· Coordinate and liaise with clients and any other government authorities and agencies for applications, submissions, and work arrangements.

· Pre-condition and post-work surveys to document site conditions for project records and closing out of authorities’ applications.

· Joint inspection and measurement with the client for project claim submission.

· Quantity surveying for preparation of sub-contractor contracts.

· Monitor project progress and deadlines.

Efficiency Management and Documentation:

· Assisting the project manager in ensuring efficiency and datelines are met.

· Coordinating between team members to ensure files are up to date and shared commonly.

Communication:

· Act as a point of contact between project team members, stakeholders, and external partners.

· Distribute project-related information and updates to relevant parties.

· Assist in preparing and distributing project reports, presentations, and meeting minutes.

Budget and Financial Support:

· Assist in tracking project budgets and expenses.

· Help with financial documentation and reporting.

Quality Assurance:

· Assist in ensuring that project deliverables meet quality standards.

· Maintain records related to quality control, testing, and batch installation.

Team Support:

· Provide administrative support to project team members as needed.

· Facilitate team meetings and communication.

Reporting:

· Generate and distribute regular project status reports.

· Compile data and metrics for project performance analysis.

Requirements

• NITEC or Diploma in Business, Quantitative Survey, Project Management, Engineering or any relevant fields of study.
• No prior experience required.
• Good command of written and oral English.
• Positive attitude, including being self-motivated, responsible, and taking ownership of work.
• Strong interpersonal and communication skills.

5.25 days' work week, alternate Saturday (half day).

8.30am to 6pm.

Roles & Responsibilities:

• Understand the Quality, Environment, Water Efficiency and Occupational Health & Safety Policy and Objectives including the environmental aspects and impacts, Safety risk assessment, etc
• Ensure the effectiveness of Quality & Environment Management System across the department and compliance with the legal & regulation.
• Conduct periodic solution analysis and replenishment.
• Troubleshooting on process issues and provide technical reports.
• Identify, evaluate, review aspects & impacts of the risk hazards for existing & new processes & activities.
• Report any quality, environmental, water efficiency, and safety to the relevant internal authority.
• To liaise with customer regarding production issues/ projects.
• To establish & review periodically the work instructions, process parameters standards (PMP) and FMEA.
• Any other ad hoc duties as assigned by superior.

Requirements:

• Degree in Chemical Engineering or related discipline.
• Having 4 - 5 years' relevant work experience in electroplating / semiconductor field.
• Knowledge and experience in Wafer Plating is essential.
• Independent and self-driven individual.
• A team player with good interpersonal skills.

Working hours:

Normal Shift (5 days work week)

7.50am to 4.55pm

Benefits:

• Company transport provided at designated pick-up points islandwide
• Medical insurance coverage
• In-house canteen at subsidized price
• Employee Flexible benefits Scheme

Position & remuneration package will be commensurate depending on candidate’s suitability and experiences.

Please visit our corporate website for more information on Seiko Epson Corporation.

### 工作地点 / Location:

**新加坡/深圳/东莞/苏州**

Singapore/Shenzhen/Dongguan/Suzhou

### 汇报对象 / Reports to:

**市场开发中心负责人 / Head of Business Development**

---

### 岗位职责 / Key Responsibilities:

1. **全球与国内客户业务拓展 / Global and Domestic Business Development**:

- 负责公司在全球范围内的市场业务开发，特别是国际大品牌客户的拓展，同时兼顾国内品牌客户的开发。

Responsible for business development on a global scale, focusing primarily on developing major international brand clients, while also targeting domestic brand clients.

- 利用现有资源及行业人脉，发掘新的业务机会，扩大全球和国内客户基础。

Leverage existing resources and industry connections to identify new business opportunities and expand both global and domestic customer bases.

- 制定并实施销售计划，确保达成全球和国内市场的既定销售目标。

Develop and execute sales plans to meet or exceed established sales targets in both global and domestic markets.

2. **客户关系管理 / Client Relationship Management**:

- 维护与现有客户的合作关系，定期跟进客户需求，确保持续的业务增长。

Maintain and manage relationships with existing clients, regularly following up on their needs to ensure continued business growth.

- 处理客户的问题与反馈，确保客户满意度，提供优质的售后服务。

Handle client issues and feedback to ensure customer satisfaction and provide excellent post-sales service.

3. **市场研究与竞争分析 / Market Research and Competitive Analysis**:

- 进行市场调研，分析市场趋势、竞争对手的活动以及行业动态，为公司业务决策提供支持。

Conduct market research to analyze trends, competitor activities, and industry dynamics to support business decisions.

- 为公司产品和服务的市场定位提供建议，挖掘新的市场机会。

Provide recommendations for the market positioning of company products and services, identifying new market opportunities.

4. **销售策略与执行 / Sales Strategy and Execution**:

- 制定全球和国内市场的销售策略，推动产品在不同地区的推广与销售。

Develop and implement sales strategies for both global and domestic markets, driving product promotion and sales in various regions.

- 根据市场情况，灵活调整销售计划和策略，确保业绩目标的达成。

Adjust sales plans and strategies flexibly based on market conditions to ensure performance targets are met.

5. **跨部门合作 / Cross-department Collaboration**:

- 与公司研发、生产、供应链等部门密切合作，确保客户需求能够得到及时反馈和落实。

Collaborate closely with R&D, production, and supply chain departments to ensure customer needs are promptly addressed and fulfilled.

- 协助市场和销售团队的产品培训，确保团队对产品有深入了解，能够准确传达产品价值。

Assist in product training for the marketing and sales teams, ensuring they have a deep understanding of the products and can accurately communicate the product value.

---

### 任职要求 / Job Requirements:

1. **学历背景 / Education**:

- 本科及以上学历，市场营销、国际贸易、工商管理或相关专业优先。

Bachelor's degree or above, preferably in Marketing, International Trade, Business Administration, or related fields.

2. **工作经验 / Work Experience**:

- 10年以上业务拓展或销售相关工作经验，具有丰富的行业资源，在全球大品牌客户及国内品牌客户的拓展方面有成功经验。

At least 10 years of experience in business development or sales, with extensive industry connections and resources, and a proven track record in developing both global major brands and domestic clients.

- 在消费电子、机械结构、自动化设备或类似行业有销售经验者优先。

Sales experience in consumer electronics, mechanical structures, automation equipment, or similar industries is preferred.

3. **技能要求 / Skills**:

- 具备出色的市场开发和客户管理能力，能够独立开拓全球大品牌客户，并维持长期合作关系。

Strong business development and client management skills, able to independently develop major global brand clients and maintain long-term relationships.

- 具备优秀的沟通能力和谈判技巧，能够与各层级客户建立良好的合作关系。

Excellent communication and negotiation skills, able to build good relationships with clients at all levels.

- 熟悉市场分析和竞争对手研究，能够快速适应行业变化并提出应对方案。

Familiar with market analysis and competitor research, able to quickly adapt to industry changes and propose solutions.

4. **语言能力 / Language Skills**:

- 具备良好的中英文沟通能力，能够进行双语的业务沟通和谈判。

Proficient in both Chinese and English for bilingual business communication and negotiation.

5. **个人素质 / Personal Qualities**:

- 结果导向，具备较强的目标管理和执行能力，能够独立完成全球和国内的销售目标。

Results-oriented, with strong goal management and execution skills, capable of independently achieving both global and domestic sales targets.

- 具备良好的团队协作能力，能够与跨部门合作推动业务发展。

Strong team collaboration skills, able to work across departments to drive business development.

---

### 薪资待遇 / Compensation and Benefits:

- **底薪 + 提成**：提供具有竞争力的底薪和丰厚的销售提成，激励员工业绩提升。

Base salary + commission: Competitive base salary with generous sales commissions to incentivize performance growth.

- 完整的员工福利计划，包括医疗保险、年假等。

Comprehensive employee benefits, including medical insurance, vacation leave, etc.

The Business Development Manager will play a pivotal role in the growth of our business by leading the Sales team in fulfilling of sales targets and expanding pipelines across the fuel market.

Main Activities:

• Lead and mentor the Sales team by maintaining and tracking sales target
• Design and implement a strategic business plan to expand and maintain our customer base
• Build and manage a pipeline of target customers using market knowledge, relationships, direct engagement and focused marketing activities
• Liaise and conduct negotiation with oil majors
• Conduct weekly and monthly reviews with Sales team to continuously drive revenue through prospecting new customers, managing existing customer relationships, and growing business within accounts
• Collaborate with other teams to identify and develop additional areas of opportunity
• Provide regular updates of all customer accounts to Management and propose action plans to increase sales
• Prepare and present sales, revenue and expenses reports to Management
• Quarter and bi-annual forecast reporting and planning for Management review
• Establish Key Result Areas and performance review for the team
• Promote and align processes and objectives with organizational business focus on Digitalization, Internalization, and Sustainability

Qualifications / Experience

• At least 3 - 5 years of managerial experience in Business or Market Development
• Experience and knowledge in oil & gas/lubricants industry is an added advantage
• Hungry and sales numbers driven
• Strong people management skills
• Able to handle stress and meet deadlines

The Business Development Manager will play a pivotal role in the growth of our business by leading the Sales team in fulfilling of sales targets and expanding pipelines across the fuel market.

Main Activities:

• Lead and mentor the Sales team by maintaining and tracking sales target
• Design and implement a strategic business plan to expand and maintain our customer base
• Build and manage a pipeline of target customers using market knowledge, relationships, direct engagement and focused marketing activities
• Liaise and conduct negotiation with oil majors
• Conduct weekly and monthly reviews with Sales team to continuously drive revenue through prospecting new customers, managing existing customer relationships, and growing business within accounts
• Collaborate with other teams to identify and develop additional areas of opportunity
• Provide regular updates of all customer accounts to Management and propose action plans to increase sales
• Prepare and present sales, revenue and expenses reports to Management
• Quarter and bi-annual forecast reporting and planning for Management review
• Establish Key Result Areas and performance review for the team
• Promote and align processes and objectives with organizational business focus on Digitalization, Internalization, and Sustainability

Qualifications / Experience

• At least 3 - 5 years of managerial experience in Business or Market Development
• Experience and knowledge in oil & gas/lubricants industry is an added advantage
• Hungry and sales numbers driven
• Strong people management skills
• Able to handle stress and meet deadlines

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 8 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience of controlling members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 5 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalise designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Report to the Chief Resident Engineer (CRE) and assist with coordination and interfacing matters with the Contractors of the IWMF and also TWRP.

• With a focus on inter-disciplinary construction management, assist the CRE to coordinate the existing team of discipline Lead Resident Engineers as required, including liaison with our in-house Engineering Design Manager (EDM) on any outstanding design issues that may affect immediate construction activities.

• Lead and coordinate the construction work interface between IWMF contractors and TWRP contractors works and tie-ins etc and in particular with counterpart Interface Manager from TWRP.

• Lead and set up interface meetings between the various Contractors to drive the Contractors to resolve their coordination and tie-in point issues.

• Coordinate with BIM Manager and set up interface BIM walk through sessions as required with the Contractors.

• Project delivery planning updates for the interfacing/tie-in points from the IWMF/TWRP Contractors with a specific focus on MEICA issues given the stage of the project.

• Coordinate and expedite internally on urgent RFA/RFI submissions with regards to interfacing matters, in particular between EPC1 and EPC2 but also with IWMF and TWRP.

• Attend other site meetings as required by CRE and coordinate internally to resolve technical issues with the Contractors with regards to interfacing matters with a specific focus on MEICA issues given the stage of the project.

• Attend and follow-up on interface/coordination matters arising from Weekly Progress Meetings, MEICA Erection Meetings, Contractors Interface Meetings, BIM Review Meetings, interface meetings with TWRP, etc and as required for the coordinated completion of the Works under each contract as they lead into the Testing and Commissioning phase of the project.

Requirements:

• A relevant Mechanical Engineering Degree recognized by the Professional Engineers Board (PEB) or registration with the Joint Accreditation Committee of the Institution of Engineers Singapore (IES) / Association of Consulting Engineers Singapore (ACES).

• At least 10 years of relevant experience in design coordination, MEICA interface management, and construction of large infrastructure and/or industrial projects, waste to energy plants, power plant projects, or waste/water management projects in Singapore is preferred but overseas/international experience will also be considered as relevant for a multidisciplinary experienced candidate.

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with resource planning and budget milestones.
• Perform site study for PV system recommendations.
• Manage site team for safety compliance.
• Monitor project progress for specification, schedule, and budget alignment.
• Plan and prepare Bill of Materials (BOM).
• Coordinate with procurement for timely material delivery.
• Create checklists for solar project inspections.
• Investigate and troubleshoot M&E issues with stakeholders.
• Assist LEW with site testing and inspections.
• Design electrical and mechanical drawings using AutoCAD.
• Requirements:.ubmit project documents for authorities.

Requirements:

• Diploma in Mechanica/Electrical Engineering, or equivalents.
• Knowledge of AutoCAD, Solidworks, or modeling software (e.g., SketchUp, PVsyst, Helioscope) is a plus.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628