Job Description

Key Responsibilities

Supervise, Lead, motivate, direct, develop and train a team of production employees. Assigns work and sets priorities for employees. Provides technical expertise and managerial leadership. Effectively communicates daily crossovers and build/test issues across all levels of Manufacturing.

Prioritizes production schedules based on available manpower, equipment efficiency, capacity and materials requirements.

Leads operational meetings; establish consistency in processes, and ensure alignment of tactical and/or strategic plans. Develops and tracks key organization performance metrics to meet or improve cycle time performance. Schedules and conducts milestone meetings.

Ensures timely response to operations issues impacting customer satisfaction; acts as an interface in the establishment of and ensuring conformance to customer/vendor requirements; prepares detailed analysis of cost of quality opportunity and initiates corrective action.

Actively strives to prevent employee accidents and injuries. Responsible for ensuring and documenting that all department employees (including temporaries) receive and follow appropriate department training including Environmental, Health and Safety training. Implements, emphasizes importance of, and monitors compliance to appropriate safety policies and procedures.

Develops personnel to include training and career development; manages the performance management process to include the development of team and individual goals, implementing employee development plans, and coaching. Manages the employee selection, hiring, reward and discipline processes.

Analyzes and plans for maximum production capacity optimization; implements and monitors manufacturing or dept. processes that collect, analyze and report key measurement data and real time status.

Identifies process and quality changes designed to improve manufacturing or department capabilities. Drives Lean, Safety and Quality. Takes corrective action.

Other Requirements: This position may require standing for extended periods of time, walking, working in tight spaces, bending, squatting, twisting, kneeling, reaching, lifting, the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools.

Additionally, because this position also may involve working in a clean room, the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields may be required.

Functional Knowledge

• Works on issues where analysis of situation or data requires review of relevant factors

Business Expertise

• Receives assignments in the form of objectives with goals and the process by which to meet goals. Recommends changes to unit or sub-unit policies. Management reviews work to measure meeting of objectives

Leadership

• Provides direction to employees according to established policies and management guidance. Administers company policies that directly affect subordinate employees

Problem Solving

• Exercises judgment within defined procedures and policies to determine appropriate action.

Impact

• Erroneous decisions or failure to achieve results will cause delays in schedules.

Interpersonal Skills

• Interaction normally requires the ability to gain cooperation of others, conducting presentations of technical information concerning specific projects or schedules.

Position requires understanding of Applied Materials global Standards of Business Conduct and compliance with these standards at all times. This includes demonstrating the highest level of ethical conduct reflecting Applied Materials' core values.

Responsibilities:

HR

- Oversee and implement strategic manpower planning initiatives.

- Manage recruitment processes, onboarding, and resignation procedures.

- Maintain staff and leave records.

- Process staff claims and handle benefits administration.

- Implement performance appraisal processes twice a year.

- Manage union relations

Finance

- Review monthly journals, provisions, and financial statements.

- Handle internal and external audits

- Administer GST, corporate tax submission, and withholding tax calculation.

- Prepare and review quarterly/yearly/5 years forecast.

- Submit budget to Board of Directors for approval.

- Analyze budget vs. actual results regularly.

Engineering Management:

- Troubleshoot basic mechanical/structural/payloads/systems problems.

- Support Engineering department and project team goals.

- Coordinate with other departments as necessary.

- Utilize internal drawing/document standards and interpret OEM airplane installation drawings.

Requirements:

- Qualified degree in Engineering/Finance, or related field.

- Fluent in Japanese for effective communication with offices in Japan.

- Knowledge of engineering principles, design, and practical application.

- Proficient in reading and understanding Computer Aided Design (CAD) designs.

- Finance and human resources skills are essential.

Job summary (F&B Sales Department)

1) Responsible for the sales objectives set by the company.

2) Work cohesively with the F&B Sales team.

Area of responsibilities

1) Sector – Food & Beverage (Cafes, Central Kitchen, Distributors, Restaurants, etc) and Hospitality (Hotels, etc).

2) Achieving the sales target set by the company.

3) Responsible for bringing in new customers and making appointments.

4) Responsible to handle customers enquires, direct marketing and contract review activities.

5) Realising the maximum account potential of company’s customers. (Example: Promote new products, upsell more items).

6) Minimise the incidences of lost customers to competition.

7) Work cohesively with Indoor Product Specialist to increase sales target.

8) To update the company on all customer’s feedback on products / services.

9) Attend to the urgent deliveries requested by the customers.

10) Any other area of responsibilities that the company deems necessary.

Competency requirements

1) Class 3 License

2) GCE ‘O’ level.

3) Communication skills, Outgoing personality.

4) Prior B2B sales experience.

Working Hours
Monday - Friday : 8 30am - 5 45pm (1 Hour Break)
Saturday: 8 30am - 2 30pm (1 Saturday Shift Every 4 Weeks)

• Promote the implementation of sales management policies and systems throughout the network and provide support
• Assist in completing the setting and decomposition of sales management indicators
• Monitor sales management indicators and assist in analyzing the causes of abnormal indicators
• Establish and improve the sales analysis and management evaluation methodology, and implement promotion training, and regularly analyze and output sales work reports based on the methodology, find problems, put forward improvement suggestions, and follow up the results
• Promote the implementation of the sales assessment and reward system for business promotion projects, and effectively motivate the performance of the sales team

Requirements:

• A bachelor's degree is required, logistics management major is preferred
• Possess rich theoretical knowledge in data statistics and analysis
• 5 years and above experience in the transportation or logistics industry
• Strong data analysis skills
• Good communication skills
• Strong sense of work responsibility and teamwork spirit

Job Description

• Provide guidance and direction to CAD team to ensure operational and rechnical excellence.
• Responsible for updating drawings as per the latest information provided
• Collaborate with others to establish timelines and budgets, as well as solve problems.
• Other duties as assigned

Job Requirements

• Make decisions based on designs.
• Maintain documentation records of generated design deliverables.
• Extensive knowledge of the company's preferred software.
• Ability to collaborate with others to solve problems.
• Minimum 5 years of relevant experience in infrastructure projects' implementation
• Strong communication skills.

Responsibilities

· Responsible for assessing, clarifying, and validating the customers’ needs on regular basis & maintaining high customer satisfaction ratings.

· Partner with solution team & delivery team to develop account strategy plan and business plan.

· Research on telco industry and perform market insight to ensure the competitiveness of proposed solution.

· Achieve annual business plan through efficient internal collaboration and proper customer approaching.

· Planning and presenting reports on account progress, goals, and quarterly initiatives to share with team members, stakeholders, and possible use in future case studies or company training.

· Handle related duties which are necessary for the proper management of key accounts and duties assigned.

Job Requirements

· Candidate must possess at least Bachelor Degree in any field.

· Candidate from ICT background is strongly preferred related with carrier network.

· Proven results of delivering client solutions and meeting sales goals.

· At least 5 years of experience in sales or relevant experiences, or similar client support role a plus.

· Ability to multi-task and manage multiple priorities in a fast-paced environment.

· Must be customer oriented, detail-oriented and capable of accurate work with minimal supervision.

· Strong negotiation skills, Self-motivated and self-directed.

Job Responsibilities:

· Ensure overall success of a project, or a portfolio of projects, by ensuring that projects are delivered on time, within budget, meet business requirements and comply with governance framework, including security and resiliency.

· Manage and monitor project plan, project milestones, risk and change management to ensure delivery of the project on schedule, within scope and budget.

· Plan and manage the scope of the project, its objectives and desired outcomes, and ensure alignment of project to the business outcomes of the Authority.

· Lead the development of the overall project schedule & activities based on the appropriate methodology including identifying dependency, critical path, milestones, and deliverables.

· Build comprehensive work plan and ensure all team members are on-board with delegated tasks and activities.

· Perform stakeholder management, including keeping the relevant stakeholders informed of the project status on a timely and regular basis.

· Manage processes and procedures covering issue and risk management.

· Manage the project schedule & lead activities towards the successful closure of the project including Performance Guarantee and Warranty Period.

· During project phase, lead the application in covering:

i. Contract Management.

ii. Service Level Management (SLA).

iii. Service/Change Request Management (scope, schedule, budget, prioritisation).

iv. Problem and Incident Management (tracking, escalation, closure).

v. Audit and Security Services.

vi. Risk Management.

· CITPM (Certified ICT Project Management Programme) or PMP (Project Management Professional) or COMIT (Certification in Outsourcing Management for IT) or an equivalent certification will be an added advantage.

· Hands-on experience in full project development life cycles.

· Team player with project management and people management skills.

· Experience in Hardware or Technical refresh project is an added advantage.

· Analytical, conceptualisation and problem-solving skills.

· Knowledge of Singapore Authority procurement and governance processes will be an added advantage.

· Familiar with Singapore government data security policies and governance Alternative Change Management Skills Set and Experience for Project Manager.

· A solid understanding of how people go through a change and the change process.

Responsibilities:

• Devise a growth strategy that encompasses both financial success and customer satisfaction.
• Conduct research to identify emerging markets and evolving customer needs.
• Schedule and conduct business meetings with potential clients.
• Promote our company's products/services, aligning them with clients' objectives and needs.
• Ensure compliance with legal regulations when preparing sales contracts.
• Maintain comprehensive records of sales, revenue, and invoices.
• Provide reliable post-sales support and feedback.
• Cultivate enduring relationships with both new and existing clients.
• Mentor and nurture entry-level staff, helping them grow into valuable sales professionals.
• Set development goals for the team and the business, and ensure their achievement.
• Provide training and assistance to team members for skill development.
• Identify and tap into new markets while enhancing sales strategies.
• Perform any additional tasks as assigned by the director.

Requirements and Skills:

• Proven work experience as a business development manager, sales executive, or in a related role.
• Demonstrated track record of sales success.
• Customer support experience is a bonus.
• Proficiency in MS Office and CRM software (e.g., Salesforce).
• Strong command of the English language.
• Sound market knowledge.
• Exceptional communication and negotiation abilities.
• Aptitude for building rapport with clients.
• Excellent time management and planning skills.
• Ability to thrive under pressure.
• Availability to work within flexible hours, including evenings, holidays, and weekends.

Singapore Aero Engine Services Pte Ltd (SAESL) is a dynamic and fast-growing organisation committed to fostering a positive and productive workplace culture. As we continue to expand, we are seeking an experienced human resource manager with a special focus on process improvement to join our team and lead HR initiatives that support our organisational goals.

About the Role:

Reporting to Vice President, Human Resources, you will play a pivotal role in developing and reengineering our HR processes to enhance overall efficiency, effectiveness, and employee experience. This position requires a thinker with a strong background in human resources and a passion for continuous improvement.

Key Responsibilities:

• Evaluate existing HR processes, identify areas for improvement, and implement streamlined procedures
• Work collaboratively with cross-functional teams to ensure seamless integration of HR processes with other business functions
• Keep abreast of changes, develop and update HR policies and procedures to align with industry best practices and legal requirements
• Research and analyse information, and provide human resources advice and decisions to maintain market competitiveness and support business goals
• Plan and manage human resources operations budget
• Establish strong working relationships with the HR team, cross-department colleagues, management team, government agencies, union, institutes of higher learning and vendors
• Act as a point of contact for employee relations issues, fostering a positive and inclusive work environment
• Responsible for the physical security of the company premises

Prerequisites:

• A degree from a recognised university
• At least 10 years of experience in a similar capacity, preferably in a fast-paced manufacturing environment
• Strong knowledge of HR best practices, employment laws, and regulations
• Strong leader with emphasis on empowering and developing others to achieve team success
• Good interpersonal and communication skills with multiple levels in the organisation
• Analytical mindset with the ability to use data to drive decision-making
• Proficient in Microsoft Office 365 and exposure to HRIS systems

Oversee the overall import and export operations. Supervise and ensure a smooth flow of the airfreight import and export operations; ensure that relevant documents are sent on time and follow up on urgent issues. Require good communication skills to ensure excellent customer service to our clients and vendors, and ensure harmony within the departments. Responsible for initiating new ideas to create an easier workflow for everyone.

Key Responsibilities

· Develop and implement strategic plans to enhance airfreight operations.

· Collaborate with senior management to align airfreight strategies with overall company objectives.

· Oversee day-to-day airfreight import and export operations.

· Ensure compliance with relevant regulations and industry standards.

· Optimize processes to achieve operational efficiency and cost-effectiveness.

· Lead and motivate a small team of airfreight specialists.

· Provide guidance, training, and support to enhance team performance.

· Build and maintain strong relationships with clients, ensuring their airfreight needs are met.

· Address and resolve customer concerns promptly.

· Collaborate with airlines, customs brokers, and other service providers to ensure smooth operations.

· Implement key performance indicators (KPIs) to monitor and improve airfreight performance.

· Monitor and report on E-AWB, FWB/FHL, and operational automation KPIs.

· Facilitate effective communication among air product teams, key accounts, and team members at various organizational levels.

· Collaborate with cross-functional stakeholders to formulate and implement a robust pricing strategy.

The Commercial & Marketing Executive is responsible for overseeing the daily operations of all online stores. This includes managing inventory, overseeing customer service, monitoring sales and profits, and collaborating with marketing and web development teams to optimize the website and improve the user experience.

Key Responsibilities:

• Manage day-to-day operations of the online store, ensuring that all orders are processed and shipped in a timely manner
• Oversee inventory management, ensuring that products are stocked and available for purchase
• Monitor sales and profits, identifying trends and opportunities for improvement
• Collaborate with marketing and web development teams to optimize the website and improve the user experience
• Manage customer service operations, ensuring that customer inquiries and concerns are addressed promptly and effectively
• Analyze data and metrics to track performance and identify areas for improvement
• Develop and implement policies and procedures to improve efficiency and productivity
• Manage relationships with vendors and suppliers to ensure timely delivery of products and services
• Stay up-to-date with industry trends and best practices and incorporate them into the online store’s operations
• Manage a team of employees including hiring, training and performance management

Requirements:

• Bachelor's degree in business administration, marketing, or a related field
• Minimum of 5 years of experience in online retail operations or a related field
• Excellent leadership, communication and interpersonal skills
• Strong analytical and problem-solving skills
• Experience with e-commerce platforms, inventory management systems, and analytics tools
• Familiarity with web development, digital marketing, and social media platforms
• Ability to work in a fast-paced environment and adapt to changing priorities and deadlines
• Strong organizational skills and attention to detail

• Develop and implement sales development strategy considering TVS SCS capabilities, trade lanes and business plan to meet or exceed assigned sales targets
• Identify and jointly develop differentiators with internal stakeholders that will increase our new customer acquisitions and retentions e.g. IV specialisations and solutions etc
• Identify and win new customer opportunities by developing a strong pipeline and executing the opportunity win plan well
• Establish and manage network of customer contacts in order to build relationships and trust between TVS SCS and the customer at various levels
• Drive strategies to establish value-creating partnerships with customers
• Transform discussions of potential opportunities into actionable future plans with customers
• Maintain optimal sales volume, product mix, and selling price by keeping current with supply and demand, changing trends, economic indicators, and competitors
• Optimise GP and adjust selling prices by monitoring costs, competition, and supply and demand
• Oversee coordination with relevant departments on meeting customers’ requirements
• Write up SOP for each secured customer and go through SOP with concerned operational parties to ensure that all understand the required processes
• Facilitate in resolving service issues with the customer as appropriate and requested
• Update all sales activities in Salesforce to ensure accurate and timely monthly sales reporting to the Country HOS and country / global management
• Develop and coordinate effective use of marketing collateral, materials and all customer related information with relevant team members in marketing and administration
• Perform any other job-related duties as assigned by the reporting manager and country / global management

Qualifications and Experience

• Minimum Bachelor’s Degree in Marketing, Sales, or an equivalent field is preferred
• 5 to 8 years in sales positions in the Logistics or Freight Forwarding industry is preferred
• Proven experience in business development and strategic account Management
• Strong market knowledge in freight forwarding, supply chain solutions, preferably with specialisations in certain industry verticals
• A sound understanding of leveraging a sales process to uncover customer needs, present appropriate solutions and close business
• Must have experience in working within a multi-national / cultural environment
• Strong organizational, business writing and negotiation skills
• Proven ability to multi-task and drive profitable revenue from multiple accounts
• Strong leadership qualities and motivation skills
• Ability to communicate and interact effectively across various levels with internal stakeholders

A Day in the Life

• Establish contact and develop relationships with prospects (preferably with contacts of Architectural & Interior Design firms)
• Proactively identify new potential clients and initiate follow up, with the objective to close sales within the assigned segments of operations.
• Identify new avenues and prospects to demand for our company products/services
• Perform market analysis, competitor analysis and market trends
• Prepare presentations and sales quotation/proposal based on client’s requirements.
• Communicate with factory on site progress and delivery.
• Follow-up on tender, work on tender submission and attend tender interviews etc.
• Any other ad-hoc duties as assigned by the company.

Who Are We Looking For

• Diploma/Degree in Building or any related field
• At least 5 years sales experiences in building & construction sector, preferably in Furniture and Fittings
• Self-driven, focused and goal oriented
• Possess excellent interpersonal skills and impeccable communication skills
• Strong organization and planning skills
• Possess a valid Singapore class 3 driving license.

At DB Schenker, you are part of a global logistics network that connects the world. A network that allows you to shape your career by encouraging you to contribute and truly make a difference. With more than 76,000 colleagues worldwide, we welcome diversity and thrive on individual backgrounds, perspectives and skills. Together as one team, we are Here to move.

About the Team

The Contract Logistics Engineering & Automation team is responsible for diagnosis and reengineering process to work out the improvements and with innovations/automations application as necessary on Contract Logistics operations for our customers in APAC and all over the world. One of major aspects is the application of updated process through engineering and innovative technologies including but not limited to automation and robotization in both new business opportunities and existing operations.

Responsibilities

Lead Engineering & Automation projects of assigned markets to support business improvements and renewals:

• Provide leadership to Qualify, Resource and Oversee the Engineering and Automation design process of all warehousing projects in assigned team within Asia Pacific Region which includes the planning, risk assessment, data analysis, material flow, determination of optimal solution concept, detailed solution design, manage automation vendor quotation and investment analysis.
• Ownership of the Standard Work Framework for Engineering & Automation APAC, to ensure efficient engineering & automation simulation processes and aligned to the key steps and milestones represented in CLDM. Guide the EA team resources to ensure awareness and compliance.
• Be the Engineering & Automation SME for matters in relation to any focused solutioning of product(s) or relevant EA tools. Constantly diagnose process and analyze engineered improvements for warehousing activities including but not limited to inbound, storage, outbound and VAS as an end-to-end process within 4 walls operations.
• Work collaboratively with the Engineering & Automation community to ensure the templates and offerings are correctly deployed to maximize the business success through these products and specific verticals
• Promote, leverage and facilitate the replications of best engineering & automation practices across EA Network

Engineering and Automation for Continuous Improvements of the assigned customer account:

• Collaborate with internal and external stakeholders to understand the requirements, communicate data requirements and methodology.
• Analyze detailed data to provide processes and workflows determination, position responsibilities and system flows in conjunction with physical material flows, identify tactical recommendations
• Analyze contractual commitments, specifications, performance and other data to plan and develop logistics activities by using knowledge of industrial and/or process engineering, automation, ergonomics, business practices & requirements
• Review the current layout and perform warehouse redesign as needed taking into consideration of net impact
• Conduct time studies and workflow movement measurement analysis to determine the current productivity and cycle times, and hence review the usage of appropriate MHE in relation to product specification, operations requirement and layout where necessary
• Validate and identify appropriate storage types and methodologies, both in manual and automated solutions, including applications of appropriate Automation and technologies for processes and/storage to increase productivity and/or capacity when applicable
• Diagnose and define potential improvement opportunities and setting the productivity standards for the operations for ramp-up/ramp down scenario.
• Clearly present and demonstrate the impact of designed processes to warehouse design, technologies required, service to customer and all stakeholders.
• Drive project deliverables, presentation of results and recommendations to stakeholders
• Produce cost efficient solution and supply pertinent information to support ROI/MIRR during Investment Application and approval facilitation.
• Provide support our sites and operations with automation experiences sharing/coaching during specification, implementation and testing phases
• Define specifications and act as a counterpart to our global and regional supplier partners for automation
• Engineering:Responsible for managing and developing solution reengineering for existing customers including nominated projects/tasks from operations and contract renewals via scheduling plan
• Renewals: Trigger and engage the review of existing operations proactively to lead process and/or storage reengineering/improvements of Contract Renewals. Deploy detailed Engineering project when necessary.
• Automation: Assess the feasibility of utilizing and expanding the use of Automation, Robotics, and Technologies on applicable process or setup to improve productivity on the operations activities, but not limited to Inbound, Putaway, Picking, Packing, Outbound and VAS. Work on the projects screening and apply strategic imperatives to drive innovation & automation in key operations. Assess the feasibility of applying automation / robotization in customer projects (new and existing businesses)
• New Business: Support in new business/growth opportunities requiring Automation via technology check

Coaching & Training:

• Support to develop and conduct training programs and provide coaching in areas of industrial engineering and automation to in-country junior resource as required based on participants’ training/coaching needs
• As a member of APAC Engineering & Automation Leadership, support on the development, deployment, and continuous improvement of standardized methodologies, tools and templates
• Act as Engineering & Automation focal point for the assigned customer account
• Ensure self and team members have an Individual Development Plan (IDP) identifying personal development and alignment to business need
• Conduct regular communication to ensure team members understand the company’s objectives and goals
• Periodical evaluation of team members’ performance based on their personal growth targets

Qualifications

Education

• Bachelors’ degree, in Industrial Engineering / Logistics Engineering / Automation & Mechatronics Engineering
• Postgraduate degree is an advantage

Related Experience

• Experience in modern warehouse and distribution, supply chain design (automation and other modern warehousing innovation (robotics, digitalisation) is preferred
• Minimum 8 years’ professional experience in Logistics, warehousing or 3PL industries, preferably in an international logistics service environment
• 8+ years of relevant working experience of solution design/automation/process engineering in the logistics and supply chain industry; knowledge in 3PL is a plus
• Experience in VSM and/or Six Sigma is a plus

Technical Skills

• Solid analytical skills with good commercial and technical understanding of Contract Logistics and Warehousing.
• Excellent knowledge and/or extensive experience of logistics automation methods and techniques
• Knowledge on operative IT systems/WMS and automation implementation or worked with automated logistics systems will be added advantage
• Excellent proficiency in Microsoft Office (Excel functions – VBA/VLOOKUP/PivotTable, and PowerPoint, etc), and knowledge about other Microsoft 365 Apps including but not limited VISIO/Stream/Power BI is a plus
• Practical working experience with AutoCAD. Experience in CLASS, Sketchup and/or other supply chain design software/tools is a plus
• Good knowledge in warehouse solution design; able to develop operationally feasible solution(s) to meet customer requirements

Soft Skills

• Pragmatic financial acumen to optimize both investment level and ROI
• Structured project approach and ability to deliver results on time, on budget, and to the excellent standards
• Good command in spoken and written English; other Asian language(s) is beneficial
• Good organization skills with experience of leading, growing and nurturing a team is preferred
• Self-starter with positive attitude to overcome problems effectively and able to work under own initiative with minimal supervision
• Highly responsible, initiative, proactive, and able to coordinate and motivate people and to work as a team under time pressure
• Intercultural skills and working experience abroad are preferred

Travel Requirements

• Able to travel nationwide and regionally/internationally on project basis as necessary (<20%)

Why DB Schenker?
Competitive salary package
Opportunities for career growth and development, both locally & internationally
Supportive and collaborative team environment
Access to company-wide training programs and initiatives

Working hours:

1. Tuesday to Friday 10:00 AM to 06:00 PM

2. Saturday 10:00 AM to 04:00 PM

a. Assist customer enquiries & complaints

b. Manage all work permit transactions in MOM Portal (Application, Issuance, Appeals, Transfer & Booking of MOM Card Registration Appointment)

c. Escalate appeals to MOM via email/call when required

d. Follow-up closely on rejection cases with Employers directly to resolve the appeals

e. Provide admin support to ensure all documents are completed in an accurate and timely manner

f. Email Employers for signature request when required

g. Purchasing and liaising with insurance company when required

h. Update regularly on Work Permit status

i. Manage MDW’s biodata record check

j. Manage the booking of SIP

k. File payment receipts when required

l. Send Transfer list to team when required

m. Send MOM QR & transfer consent form to Employers for transfer cases

n. Create Job sheet for helpers prior to arrival

o. Update when helper return for transfer or repatriated

p. Print documents when required in office

q. Assist in any ad-hoc duties assigned

Job Responsibilities

• Lead, manage and implement end-to-end projects related to IT Infrastructure (including Cloud) according to project governance.
• Work with internal business and other stakeholders to understand and analyse business requirements, translate business IT requirements to technical requirements.
• Work out full-scaled and precise proposal with technical solution team, coordinate and communicate resource and define clear roles with all project resources.
• Work onsite in a bank and manage vendors to ensure project delivery within schedule & budget and expected quality.
• Manage the communication and arrangement internally and externally.

Job Requirements

• Bachelor’s degree in information technology, Computer Science or equivalent.
• Min. 8 years of experiences as Project Manager in a bank in IT Infrastructure.
• Experience in Cloud related project implementation.
• Experience of Vendor management.
• Knowledge of IT security, Risk Management and Security Control.
• Ability to handle multiple projects concurrently.
• Possess good initiative and proactive in approach.
• Excellent communication, presentation and interpersonal skills.
• Project Management certification (e.g., PMP, PRINCE 2) is a plus.
• Experience in Agile Project Management methodology is an advantage.
• Certification in ITIL and Cloud related is a plus.
• Knowledge of IT regulation in APAC countries.

Responsibilities

• Manage day-to-day sales and operations of aesthetics medical spa business
• Achieve personal and outlet sales targets consistently
• Identify, recommend and promote appropriate face, hair removal and body aesthetic treatments
• Work closely with the Marketing Department on the execution of sales and promotional activities, handle social media/phone enquries
• Build customers relationships into long-term clients
• Handle customers’ feedback and provide service recovery where necessary.
• Evaluate staff performance, provide feedback and coaching.
• Analyse, maintain and develop standard operating procedures
• Handle ad-hoc duties and projects assigned by management
• Build and motivate the operations team to boost sales performance

JOB REQUIREMENTS:

• Required language(s): English, Mandarin (in order to handle Mandarin speaking customers.)
• Required Skill(s): team management, sales and operations, consultation, customer service
• At least 3 years of relevant sales experience in the aesthetics industry and experience in outlet management preferably in a medi-spa environment
• Prior experience in aesthetics treatments such as lasers, hifu, radiofrequency, fat freezing, emsculpt, hair removal etc
• Well-groomed with a pleasant personality
• Results driven and service oriented with proven sales track record.
• Strong aptitude in sales promotional techniques
• Willing to work 5.5 days (6 off days per month)

Roles & Responsibilities

Duties and Responsibilities

• Handle incoming event enquiries via various channel including telephone, fax and email for the Catering Team.
• Assist to prepare proposal and send out contracts.
• Daily distribution of event orders to respective departments concerned.
• Assist to generate e.g.; labels, signage, checklist.....
• Establish and maintain appropriate filing system for all past events.
• Provides administrative support to all departments.
• Maintain and order department supplies as and when needed and within budget.
• Undertake any special assignments that may be assigned on an adhoc basis.

Personality and Competencies/Skills

• Hands-on experience in managing eCommerce catering ordering system
• Able to multi task and able to work under pressure in a fast-paced environment
• Great interpersonal and strong communication skills
• Exceptional keen eye for detail and critical thinker with problem solving skills
• Team player, able to work independently with minimal supervision
• Proficient in Microsoft Office (Outlook, Excel, Word)

Experience and Qualifications

• Minimum 1 years working experience in a relevant industry
• Diploma/Degree in any field of study

JOB PURPOSE

The Customer Service Specialist is focused primarily on ensuring that all sales support and service activities are well-coordinated and completed within prescribed process guidelines in support of the sale branches. The role includes embarking on program initiatives targeted at meeting the demands / requirements of our customers, thus satisfying their needs.

PRINCIPAL ACCOUNTABILITIES

• Effective day to day customer service operation to support the pre and post shipment requirements of the sales branches.
• Customer backlog management with aim of maintaining backlog integrity through systematically reviewing and addressing all backlog issues encountered on a daily basis.
• Customer Service Specialist will be allocated into a specialist team and rotate through the specialist function as deemed necessary.

JOB DESCRIPTION

• Weekly management of the Customer backorder report with a turnaround time of 48 – 72 hours for a complete review.
• Work and assist the Sales team in managing their Customer pre & post shipment.
• Support and drive the requirements generated by Customer Bond Constraint Report related to fulfillment of bonded parts in their BIM program.(If applicable)
• Escalate all their issues or challenges in fulfilling their assigned task to management in the most appropriate timeline to seek guidance on resolution.
• Manage customer’s portal update and customized report if required.
• Update customer production change requirement to optimize inventory planning.
• Elevate any potential delivery shortfall to respective sales personnel for awareness and communication.

REQUIREMENTS

• At least a Nitec or Diploma qualification in a relevant field of study.
• At least 2 years of working experience, relevant industry experience is advantageous but not a must.
• Candidates without experience are welcome to apply.

COMPETENCIES

• Accurate data entry skills
• Proficiency in Microsoft Office Applications – especially in Excel
• Basic knowledge and understanding of transportation modes (air and ocean)

Job Responsibilities:

• Oversee the accounting function for Corporate Office
• Review, analysis and commentary of monthly financial reports for the group
• Responsible for banking and treasury Function
• Co-ordinate year end external audits and ensure statutory accounts are completed timely
• Ensure financial statements are prepared in accordance with Financial Reporting Standards
• Assists with formulating Corporate Finance policies
• Oversee taxation and transfer Pricing matters
• Oversee accounts receivable and credit control function

Requirements:

• Degree in Finance or Accounting or equivalent
• At least 7 years of post-qualification experience in in a diversified international business environment involved in manufacturing and trading
• Knowledge in costing will be an advantage
• Strong leadership and communication skills
• Have a good command of written and spoken English and Mandarin
• Ability to work with tight deadlines
• Proficient in accounting software, MS office and other reporting tools

Job Description:

· Client & partner management

· Office administrative work

· Answering phone calls and emails

· HR work and worker management

· Invoicing and purchasing

· All other related or ad-hoc duties assigned

Job Requirement:

· Proficient in MS Office skills

· Proficiency in Xero is a plus

· English speaking, English and Chinese speaking is a plus

· Strong in verbal communication, interpersonal and organisational skills

· Willingness to work in stressful environments

· Ability to multi-task, work under pressure and meet tight deadlines

Benefits:

· Flexibility of WFH if proven to perform well remotely

· Prospect in promotion to a higher managerial position

· Team-working environment with ‘Family’ cultures

· Medication allowance and welfare

· Remuneration shall be based on years of experience and qualification.

We apologise that only shortlisted would be notified.

TECHNICAL SKILLS/KNOWLEDGE:

· Possess a high-level knowledge of CAD-based systems (Autodesk Architecture 2019 preferred), Revit, Microsoft Windows-based systems (Word, Excel, PowerPoint, Project, etc.); 3-D modeling experience preferred, but not required.

· Possess excellent written and oral communication skills.

· Possess strong interpersonal skills among the project team, consultants and client representatives.

· Ability to travel to and from the firm by automobile to attend project site meetings/surveys.

· Understanding modern architectural / construction means and methods; and the ability to fully detail these systems in coordination with structural, mechanical and civil trades.

· Proficient understanding of Construction Drawing/Detailing of various commercial and institutional building systems of significant size. Healthcare architectural design experience preferred.

· Ability to solve complex architectural design and construction problems to serve the Client’s program and advise the Senior Management team of any issues that deviate from the program goals and/or that impact the project budget and timeline.

· Proficient understanding of MEP, Structural and Site/Civil Engineering trades, while understanding the impact that these trades have on the architectural design concept. The Project Manager must possess the ability to direct consulting teams in the early stages of design and be involved in the election of structural and MEP systems and assemblies for each Project(s). The Project Manager must properly coordinate these consultant trades throughout the Construction Document phase.

· Ability to manage multiple projects at various stages of development.

· Ability to function comfortably, gain trust, confidence and deal effectively with a wide range of individuals including clients, owner’s representatives, consultants, contractors and project team.

KEY ROLES/RESPONSIBILITIES:

Must proficiently serve in the following capacities throughout each architectural project:

· Will be the Project Lead in in developing design and construction documents for bidding and construction on multiple projects.

· Will lead a team of 2-3 staff members and be responsible for their productivity throughout each Project. The PM will consistently meet with team members to direct workload and review project timelines/milestones.

· Will lead the field measuring survey of existing spaces and structures and direct the junior staff accordingly to produce efficient and accurate surveys.

· Will develop design / space plans based upon the Client’s approved program requirements (assist client with programming).

· Serve as the Construction Administrator during the Construction Phase, as required. Specific responsibilities during this phase include:

· Review and approval of Shop Drawings & Submittals.

· Responding to Contractor’s Request For Information (RFI’s).

· Review of Contractor’s Payment Applications and advise Project Architect in a timely manner that said applications should be certified for payment.

· Review and Approve Change Orders, advising Project Architect that a change in construction cost has occurred.

· Prepare and Issue Construction Field Directives under the supervision of the Project Architect and/or senior management team.

· Perform Punch Lists at Substantial Completion.

· Attendance at on-site construction project meetings will be required and the Project Manager will keep accurate meeting minutes according to the firm’s standard format. The Project Manager will advise the General Contractor and the senior management team of any critical path and long lead items that will affect the project goals.

· Exhibit entrepreneurial qualities that could support business development.

· Organize and direct the architectural and/or engineering team to execute the work in an orderly, timely, and coordinated manner.

· Perform quality assurance checks on all drawings and documents related to assigned projects.

· Issue progress review sets of drawings to Project Architect/senior management team at various levels of development, according to established project milestone dates.

· Make decisions independently and/or as part of the management team, to adhere to the Design Concept, Project Budget, Project Timelines and Milestones.

· Exhibit excellent administrative and personal time management skills while having the ability to prioritize assigned tasks and delegate efficiently to maintain established project timelines and milestones. Project Manager shall advise Senior Management team of any deviations to project timelines and milestones.

· Exhibit strong multi-tasking abilities which allow performance of the above responsibilities for multiple projects simultaneously.

· Oversees training of junior staff and implementationof drafting standards, providing mentorship and assistance in solving technical related project complexities.

· Commitment to meeting project deadlines and milestones while understanding his/her role as part of the project team. The Project Manager understands that he/she must move strategically into different roles during the course of the project in order to achieve the overall project goals.

· Apply excellent research skills to insure project code compliance and to fully develop project technical specifications.

· Strong building agency experience; prepare applications, draft responses to agency objections, define alternate approaches to achieve project approvals.

Date: 19 Feb 2024 to 25 Feb 2024

Venue: Suntec City Tower 4

✅No experience required.

Job Scope:

• Attend face to face with customers at the event site
• Perform product demonstration, deal with customer's enquiries and help to resolve their concerns
• Ensure positive customer purchasing experience and share feedbacks with the team
• Other ad-hoc duties

REQUIREMENTS:
• All educational backgrounds are welcomed

• Candidates MUST commit from 19 Feb to 25 Feb
• Take initiative to complete tasks given
• Fun-loving & team player

We are seeking a dynamic and self-motivated Business Development Executive to join our team. This position offers the ability to maintain, develop relationships with key customers and manage the promotion and strategic sales. You will be responsible for discovering and pursuing new sales prospects and maintaining customer satisfaction.

Do you have a strong sales background and demonstrated sales success? If so, this may be the opportunity for you.

Responsibilities : -

• Responsible to achieve sales target and increase market share
• Actively prospect sales leads and secure potential new clients
• Develop and nurture strong client contacts and positive relationships with key accounts
• Ensure successful sales retention by proactively forging strong relationships with clients
• Manage a portfolio of assigned accounts to achieve success and retain existing customer
• Develop a strategic approach to provide solutions to customers

Job Requirements : -

• Minimum Degree in any disciplines
• Minimum 1 year of Sales Experience in any industry, preferably in logistics industries
• Experience and knowledge in Supply Chain Management will be an added advantage
• Ability to understand customers’ perspective and think win-win
• Excellent communication and interpersonal skills
• Good presentation skills and negotiation skills
• Team player, passionate and self-motivated and a results-driven approach
• Possess own vehicle is preferable

Job Description & Requirements

• Assist and support in managing and oversee daily operations and ensure compliance to operations standards and procedures.
• Assist and support in managing restaurant financial objectives by forecasting requirements, scheduling expenditures through best monitoring methods via tracking, monitoring and analyzing Sales, Labour & Food cost variances
• Participate in planning weekly schedule planning and daily team floor plan.
• Trains and provide on-going communication to staff and deliver first-class service to customers
• Propose staff changes in assigned areas, including hiring, promotion, demotion and vacation leave
• Maintain safety requirements in the restaurant.
• Handles customers' feedback promptly.
• To comply ad-hoc with all the admin and paperwork requirements.