Job Requirements

· Lead Process Design Engineer for the Process Design of Storage Terminals, Process Units in Refineries and Chemical Plants which involves the Basic and Detail Design including the preparation of PFDs, P&IDs, System Description, Process Control Philosophy, Hydraulic Calculation, Heat Transfer Calculation, Heat & Material Balance, Relief System Calculations, Utility Consumption, Equipment data sheets & Instrument data sheets.

· Prepare Technical Proposals including preparation of PFDs, P&IDs, hydraulic calculations and system description.

· Design Calculations for Pumps, heating coils, Thermal Relief valves and Tank venting calculations.

· Analyze pressure relief design scenario and calculate the relief load and validate the results

· Prepare Process Data Sheets for Instruments, Equipments & Tanks.

· Review other Discipline Documents including vendor documents, GA drawings, Instrument data sheets etc.

· Participate in HAZOP and SIL study, Review HAZOP Report and prepare HAZOP & SIL Close-out reports.

· Participate in P&ID Design Review and Process Control Philosophy Review, and prepare review Close-out reports.

· Design of Fire Protection System as per NFPA for the Storage Terminal, which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Design of wastewater collection and disposal system for the Storage Terminal which includes Tank Farms, Pump Stations, Jetties, Truck Loading Bays

· Prepare Surge Analysis report using Pipenet Transient Module.

· Development of automated excel spreadsheets for process calculations.

· Performing Simulation using Aspen HYSYS & Unisim

· Preparation of simulation report & HMB.

· Equipment Sizing and Preparation of Equipment Data sheets.

· Preparation of technical specification in line with the project requirements

· Performing Hydraulic calculation and preparation of Data sheets for control valves.

· Performing Relief load calculation and preparation of Data sheets for safety valves.

· Design of Flare system using Flarenet.

· Utility sizing and Preparation of Utility Consumption report.

· Preparation of Process Control Philosophy & Cause and Effect diagram.

· To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

· To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelor of Engineering (Chemical)

Experience

Preferably 10 years’ experiences

Software Requirements

1) Pipe Net

2) Good proficiency in MS Excel, MS word

3) Smart Plant P&ID

Code Knowledge

1) API 2000, API 520, API 521, API 526, API 2350

2) SS 532

3) NFPA 11, NFPA 13, NFPA 15, NFPA 20, NFPA 30

Job Description

• Lead and manage a team of Sub-contractors for all addition and alteration (A&A) work
• Plan, organize, co-ordinate and implement A&A work timely and ensure compliance to all authority and client's requirement
• Liaise with sub-contractor and vendor for quotations and purchase orders
• Evaluate project requirements and generate feasible proposals for work completion
• Liaise with client's appointed officer on all issues related to the A&A and project work
• Preparation and submission of shop drawings, point schedule, materials, write-ups, and other necessary items for approval
• Track and manage project progress and submit progress claims
• Lead, coordinate, and execute testing & commissioning works for A&A works with proper documentation
• Conduct site surveys, attend meetings on-site, evaluate installation progress on-site
• To arrange and provide servicing & maintenance works for active sites

Requirement

• Diploma/Degree in Mechanical Engineering or Electrical Engineering or any related discipline
• At least 1~3 years of working experience in construction or retrofit project in BMS/ACMV/Electrical/ELV
• Good knowledge of Building Services (BMS, ACMV or Electrical or ELV) and project management
• Proactive individual who can work independently
• Good interpersonal and Communication skills
• Able to multi-task and achieve deliverables on schedule
• Able to generate project reports via Word, Excel, Powerpoint

We regret only short listed candidate will be notified.

Job Description

Responsibilities

Operations Back Office Support (AR)

• Assist with AR department especially debt collection, invoicing
• Telephone customers to achieve payment
• Coordinate with Engineers, Licensing to check on invoicing
• Any other ad-hoc job being assigned

Requirements

· ‘O” Level

· Proficient in MS Office applications

· Good initiative and a good team player

· Good interpersonal skills

Working hours:

Mon-Friday 8.15 to 5.30pm

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Element has an opportunity for an Associate Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory and be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders and assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis and be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelor Degree in Materials Science, Materials Engineering or Civil Engineering
• Have a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business and working knowledge of laboratory safety
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed
• Possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an experienced Quality Engineer. Reporting to the Principal Quality Manager, you are an essential member of the management team and responsible for the overall quality performance. This includes implementation, maintenance and improvement of Element quality management system (QMS). The successful candidate will have a sound working knowledge of ISO/IEC 17025, ISO/IEC 17020 or ISO/IEC 17065 requirements in relation to testing, calibration inspection and certification.

In this role, you will have interaction with clients, Accreditation Bodies and will be responsible for advising operational colleagues of the importance of quality, accuracy and integrity in the provision of the testing, calibration inspection and certification services we provide.You will be involved in leading quality at a local level and will work closely with the Principal Quality Manager to ensure that Element quality policies, processes and procedures are effectively implemented. As a quality leader within Element you will be capable of driving a culture of quality assurance and quality improvement, working closely with your operational colleagues and the wider Element quality community.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Ensuring all staff buy-in to the effective and efficient implementation of Element quality policies and procedure by providing advice, guidance and support on quality issues to Element Singapore and Malaysia business units.
• Driving quality improvements at every opportunity and proactive participation in continuous improvement and process improvement projects and ensure effective adoption of Element e-QMS throughout Element Singapore and Malaysia business units.
• Proactive participation in projects to deliver identified Quality objectives and contribute to and drive key initiatives to improve Quality awareness and compliance.
• Management of and participation in scheduled internal audits across management system and technical disciplines and proactively monitoring laboratory test equipment for calibration currency and advising management of upcoming schedules,ensuring corrective and preventive actions identified within specific laboratories are implemented and verified in a timely manner.
• Represent Element Singapore and Malaysia business units during assessments by accreditation bodies and audits by clients and controlled document holding and arrange to update appropriate documentation as necessary, control and issue of Element Singapore and Malaysia Quality Management Systems documentation and participate in the internal audit programme to monitor implementation of quality policies and procedures.
• Manage external and internal proficiency testing programs of all Element Singapore and Malaysia business units and prepare compliance and improvement metrics for Element Singapore and Malaysia business units quality as required.
• Writing and reviewing quality documentation as required and effective and efficient management of personal work schedules and timely generation of Element Singapore and Malaysia business units quality reports.

Job Requirements:

• Minimum Bachelor of Science or Engineering qualification.
• Proven experience (minimum two years) of managing quality management systems within a multi-discipline testing, inspection and certification environment, preferably multi-location.
• Demonstrable experience auditing against ISO/IEC 17025, ISO/IEC 17020 and ISO/IEC 17065.
• Sound knowledge of equipment calibration and analysing proficiency test data.
• Knowledgeable in uncertainty of measurement and risk assessment and hands-on experience with Element e-QMS preferable.

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Reports to Design Manager
• Responsible for geotechnical design / construction (Specially for bored pile, ERSS and retaining wall)
• Coordinate all design related matters with Client / Design consultant / Subcontractor / Specialist / Construction team
• Review the geotechnical design calculation & report & shop drawing
• Manage the schedule of all design item as per construction program

Job requirements:

• Degree in Civil Engineering or equivalent
• Minimum 5 years' relevant experience in construction design field, inclusive of LTA projects
• Experience in viaducts/infrastructure preferred
• Technical expertise and knowledge in geotechnical design
• Proficient in FEM analysis application (Plaxis, etc.)
• Good communication skills
• Location : Woodlands
• Project: Viaducts

Job Description & Requirements

The engineer is to act as Electrical Commissioning Lead (entire Electrical Systems Lead), manage all Electrical system commissioning from preparation phase to execution phase.

Job Description

• During commissioning preparation phase, responsible to attend Supplier Kick Off meetings to roll out package related commissioning requirements, review of Supplier documents, review ITR assignment and provide inputs for commissioning schedule.
• Prepare and review system boundary, commissioning procedures and commissioning deliverables.
• Support Commissioning Manager and Commissioning Project Engineer in the preparation of required tools, utilities, first fills and others for the commissioning activities of Electrical systems.
• Electrical Commissioning Lead is responsible for successful and safe commissioning of their area / system following the commissioning strategy set by Commissioning Manager.
• Work closely with MC Coordinator, Commissioning Coordinator for timely completion of the ITRs, mechanical completion and commissioning completion.
• Supervise day-to-day electrical commissioning activities are complied with Company’s Standards and Procedures.
• Identify and integrate Safety, Quality requirements in the electrical commissioning activities to ensure safe operability and maintainability.
• Understands the Completions philosophy and Scope of Work by studying the applicable industry standards, Company standards, specifications and procedures.
• Manages electrical commissioning PTW, electrical commissioning engineers, assigned technicians, operations support, supplier support and CLASS witness to execute the approved commissioning procedure including performance standards verification successfully, sign off the test reports and support for the system dossiers completion until handover.
• Reports to Commissioning Manager and Commissioning Coordinator.
• Interacts with Engineers and internal stakeholders for the purpose of training, discussions, attending meetings and other project related requirements.
• Coordinates work requirement with commissioning assistant in order to prepare system boundary drawings and handover dossiers.

Requirements

• Educational Qualification: Bachelor in Engineering (Electrical)
• Relevant Experience: 7 years and above of relevant working experience in FPSO commissioning.

• Prepare quality reports, perform process audit, develop & implements quality assurance standards, policies, processess & controls.
• Able to liaise & resolve with customers on quality related issues.
• Data compliation, co-ordination and facilitation of all internal and external audits, re-certification of ISO 9001.

Job Responsibilities

• Provide 24 X 7 technical assistance via phone,
• Troubleshoot CPE issues, Mobile Broadband, Web/Mail Hosting/setup, co-location and other ISP related products and services
• Coordinate with other departments and handle internal escalations
• Attend to faults and escalate if necessary. Common faults are outages, server failure, router, switch etc.
• Manage monitoring systems (eg. bandwidth monitoring, link monitoring, DDOS notification etc)
• Provide after-hours technical assistance to Data Centre (eg. handle customer visits, reboot server, DDOS issues, etc)
• Coordinate with other departments for basic troubleshooting support
• Ensuring alert for major project is being follow up closely and ensure that relevant department is being updated of the progress
• Ability to adapt quickly to ever changing priorities and handle multiple tasks simultaneously

Job Requirements:

• Degree/Diploma or equivalent with NOC experience
• Minimum 2 years of experience in a support/service environment with a keen interest in Internet Technology
• Preferably with CCNA certification or other network certifications
• Customer oriented, motivated and driven to explore new ways of doing things
• Team worker with good interpersonal, communication and writing skills
• Able to work within constraints and meet service levels
• Willing to accept new challenges and responsibilities
• Highly motivated with initiative
• Willing to work on rotating shift, inclusive of weekends and public holidays
• Customer focused attitude with ability to explain technical information to non-technical people with compassion
• Outstanding communication skills in English, both written and verbal

Element has an opportunity for a Senior Engineer to join our rapidly expanding team. In this role, you will perform a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This position will be based in Sungei Kadut Loop,Singapore.

Job Duties:

• Ensures that safety and quality standards are being met and maintained at all times within the company's safety and QA programs and work with assigned staff to ensure work schedules are maintained and balanced
• Responsible for the location safety performance and awareness; spearheads and manages initiatives that drive a culture of safety first and advise team on technical issues with regard to the successful and timely completion of daily work
• Under the direction of the General Manager, is responsible for directing, coordinating, facilitating and monitoring the daily activities of the lab operations
• Provides and sets direction within the lab to ensure that production goals and customer expectations are consistently met in a safe, timely and cost-effective manner and demonstrates deep knowledge of Element capabilities, processes and expertise to be able to clearly explain the benefits of Element testing services to all audiences -- internal and external
• Provides technical and engineering leadership, and supports the development of new technologies within a local laboratory and potentially across the Element enterprise and provides counsel to coworkers and customers requiring critical analysis of data
• Is able to exchange technical information and knowledge with peers, senior colleagues and specialists across the element enterprise and actively seeks ways to disseminate critical testing knowledge, acumen and protocols throughout Element
• Provides input and support on business development opportunities with new or existing customers
• Confident making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders

Job Requirements:

• Possess Bachelor Degree in Civil Engineering or Materials Science discipline with a minimum of 5 years of experience in a management role ideally with operations management experience
• Working knowledge of laboratory safety with extensive knowledge of the current suite of testing capabilities and proven ability to support and train staff members for the department in order to meet customers’ expectations on testing and possess strong technical leadership is vital to the production and operation of assigned tests with advanced working knowledge to operate various testing equipment
• Ability to communicate (written and oral) effectively with clients and colleagues with great attention to detail and timing of results and possess proven track record of success with regard to technical competency both inside and outside of the lab
• Proven ability to multi task and work under strict time lines and strong organizational, problem-solving and conflict resolution skills to effectively establish and maintain two-way communications to understand the needs and concerns of all departmentsUnderstanding of continuous improvement disciplines such as Six Sigma, Kaizen, Lean Manufacturing, 5S, etc and posses strong project management, analytical and problem solving skills provide go-to insight in the daily efficient operation of the lab

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Element has an opportunity for an Engineer to join our rapidly expanding team. As a member of the operations team, the Engineer position performs a variety of routine and non-routine testing assignments within the department assigned and insures timely and accurate test results under minimal direct supervision.

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Provide technical and engineering leadership, and supports the development of new technologies within a local laboratory
• Be accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Be expected to obtain guidance in non-routine situation testing and have the ability to oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide Input and support on business development opportunities with new or existing customers
• Be confident in making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and carry out crucial examination and implementation of testing concepts and data
• Utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Working knowledge of laboratory safety
• Possess a Bachelor Degree in Materials Engineering, Civil Engineering or Materials Science with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• Possesses a demonstrated ability to apply academic knowledge within the context of Element’s business
• In-depth understanding of testing concepts
• Can analyze and compiles testing data from the tests performed and possess strong computer skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

• Reports to the Construction Manager
• To ensure that day to day lifting operations are monitored at an appropriate level.
• Plan, organize, supervise and liaise closely with sub-contractors and operation teams on all ongoing lifting activities.
• Perform routine checks and inspections on site to ensure the compliance with authorities’ requirements.
• Address to concerned party regarding the safety of any lifting operations
• Provide reports to construction team regularly
• Liaise closely with HSE team to ensure operations comply with safety standards

Job Requirements:

• Degree in Civil Engineering or equivalent
• Minimum of 5 years’ experience in the construction field; inclusive of 3 years’ experience in construction and supervision for vehicular structures and road projects (LTA Road / MRT / Viaduct)
• Technically expert and highly knowledgeable in lifting of heavy structures
• Candidates with previous experiences in LTA Projects are preferred
• Attained IES/SHETC Appointed Person for Lifting Operation certification is mandatory for this position
• This position require to perform night lifting works
• Location : Woodlands
• Project : Viaduct

• Knowledge in CNC machining will be added advantage.
• Good Communication & interpersonal skills.
• Develop new business clients, maintaining existing customer relationships and execute sales strategies.
• Respond to enquiries, follow up, provide technical solution to clients on co's products & services.
• Review customers enquiries & quotation.
• Achieve corporate sale targets.

Roles and Responsibilities:

• Diagnose and troubleshoot compressors received at the workshop, as preliminary stage before execution of the service.
• Service, overhaul and test all compressor technologies in the company's portfolio, from reciprocating to screw compressors.
• Effectively communicate verbally and in writing with co-workers and when necessary, with customers.
• Recommend preventive measures and provide prompt and effective resolution to technical problems
• Duly maintain proper record for each service job, such filling service, inspection and test reports
• Follow up work orders for each job, maintaining checklist and daily time sheets.
• Work effectively in coordination with other departments in order to ensure a smooth and timely supply of required parts to complete service activities.
• Guarantee proper maintenance of workshop tools and equipment
• Conduct safety assessments of the working environment and to proactively propose improvement to enhance the efficiency of the operations
• Provide technical training for customers and technicians in the team.
• commissioning or commissioning assistance services, inclusive of verification of electrical panel, refrigerant charge adjustment, data recording and analysis
• Troubleshoot and identify potential failures of system and analyze compressor failure through operation data.
• Lift and shift to support customer in removal and reinstallation of compressors on the refrigeration systems

Requirements:

• Minimum of 5 years HVAC field service experience
• Knowledge in air-conditioning, chiller or HVAC systems
• Electrical and basic electronic background is required, must be independently able to troubleshoot and identify electrical control and power line failures.
• Diploma/Degree in Mechanical / Electrical Engineering or equivalent
• Able to work under pressure and in a fast-paced environment.
• Good in planning, organizing, interpersonal skills and able to work independently.
• IT Savvy, proficient in MS Excel and MS Word
• Must have experience working inside vessel

Added Advantages:

• Brazing or welding certification
• Safety certifications
• Possess class 3 driving license

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

Purpose and Scope

• Provide maintenance works and plant equipment to support the Operation

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure.
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Experience in Plant Fire System and knowledge in Electrical System such as MV Switch gear, LV MCC, UPS, Soft Starter, VSD.
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualifications & Experience

• Degree in Electrical Engineering
• Minimum 3 years’ experience in a Power Plant or Utilities plant environment

Key Skills, Competencies & Behaviours

• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

[Industry: Semiconductor]

Job Highlights

• Medical Benefits
• Work-Life Balance (5 Days Work Week)
• Positive working environment

Job Description

• Coordinate projects and supervise site workers/subcontractors
• Coordinate and ensure targeted completion dates are met
• Prioritize tasks, identify risks, and provide relevant solutions
• Provide up-to-date information to the Project Manager regularly
• Carry out routine daily tasks and procedures of the project
• Monitor schedules and deadlines as appropriate
• Review CAD drawings, specifications, and technical documentation
• Track the progress and quality of work being performed by site workers/subcontractors
• Interact with relevant teams to ensure the smooth functioning of projects
• Coordinate with customers for proposals and manage onsite project execution
• Ensure site safety in accordance with safe work procedures and maintain good housekeeping
• Conduct regular site visits and inspections to assess work progress and quality
• Any other ad-hoc duties and tasks assigned

Job Requirements

• Minimum Diploma in Mechanical, Electrical Engineering or equivalent
• Minimum 2 years of experience in managing onsite projects (semicon industry)
• Proficient in AutoCAD or similar CAD software.
• Strong technical knowledge and understanding of engineering principles
• Candidates with CSOC and WAH certificates will be an added advantage
• Willingness to travel to project sites as needed
• Able to lead and work independently

Responsibilities:

• Lead and manage ACMV system design, installation, and commissioning in construction projects.
• Coordinate procurement of ACMV equipment and materials.
• Coordinate and liaise with consultants, main contractors, and sub-contractors.
• Perform tests, inspections, and commissioning of ACMV systems for proper functionality and performance.
• Prepare reports, progress updates, and documentation related to ACMV works for project management and client review
• Supervise and check sub-contractors’ works according to design drawings, specifications, and regulations.
• Generate incident reports.
• Perform all other duties as assigned and required.

Requirements:

• Diploma/Degree in Mechanical Engineering or equivalent.
• 3 years of working experience in the construction or mechanical related fields is required for this position.
• Required skills: Microsoft Office, Microsoft Project, and AutoCAD.

Element has an opportunity for an Engineer to join our rapidly expanding team in Singapore

In this role , you will perform variety of routine and non-routine testing assignments within civil testing operations and esure timely and accurate test results under minimal direct supervision

This role is based in Sungei Kadut Loop , Singapore.

Job Duties:

• Be accountable for accurate and timely release of testing data to customers and oversee standard and/or routine technical problem solving activities
• Interact with customers on technical issues and questions and provide input and support on business development opportunities with new or existing customers
• Provide formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assist in the professional development of novice technicians and engineers within the local laboratory and utilize an assortment of skill, methods, procedures and materials in advanced testing analysis
• Be adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Job Requirements:

• Possess a Bachelors of Science degree in a science or testing related field with a minimum of 2 years’ pertinent post degree engineering experience, or advanced academic/professional qualifications
• In-depth understanding of testing concepts and able to apply academic knowledge within the context of Element’s business
• A team player with advanced computer and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

Roles & Responsibilities

Role & Responsibilites

Receives guidance only on new assignment / objectives and special / complex features.

Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.

Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.

Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.

This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.

Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.

This position is considered more seasoned and chances for errors are minimal. Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.

Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.

To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.

Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems. • To support in developing project deliverables as per project & client requirement

Prepare & Review of company development work methodology / procedures.

Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.

Attend FAT and SAT depending on project requirements.

Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.

Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly.

Perform duties as per directives of reporting authority.

Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard and company PTW systems regarding all the Instrumentation & Control System Sow

We are looking for Senior Telecom Engineers to join our dedicated people in Project Engineering team at Singapore office. The role in our Project Engineering team is to deliver the Telecoms Systems to our customers in the Oil and Gas, and Renewable industries.

If you enjoy the technical challenges and variety of working in a fast moving project environment then this may be the next career move for you.

Key Responsibilities and Tasks

You will work in a Project team and your responsibilities and tasks will include:

• Front End Engineering Design
• Preparation of engineering drawings & documents
• Preparation of specifications for procurement of equipment.
• Develop detailed system design; with diagrams and schematics including integration of systems
• Selection of equipment
• Develop bulk material listings
• Provide input for preparation of selected reports, weight equipment list, function and fabrication / installation.
• Calculation & studies (RF, Network, PAGA, CCTV, etc.)
• Provide accurate and detailed project documents and drawings
• Interface with sub vendors to ensure they meet the project requirements.
• Configuration and testing
• Support to the Service team
• Support to the tender and sales team
• Coordination with other disciplines

Who we are looking for

You shall have a relevant professional background with a Degree in Telecommunication subject and project engineering experience in the energy sector (Oil & Gas, Renewable, etc.). You must have proficiency on a wide range of technologies including Data Network, Voice, Radios, PAGA, CCTV, Metocean, Acess Control, Radar, VSAT, Navigation, Microwave, etc.

As a team player, you shall be organized with good attention to detail and having a positive attitude with a proactive and practical approach to work. You need to have excellent analytical and problem solving skills with a good understanding of IT and software based solutions. Fluency in English is essential.

Interested?

Please send us your resume, stating your credentials and past job experience with your application. Please state your expected salary, required time for notification and reasons for leaving your present position, if available.

Salary will commensurate with the relevant experience.

We regret that only shortlisted candidates will be notified.

Purpose

To manage a team of technicians/junior staff in a specific engineering discipline (Instrumentation) to ensure timely implementation of projects and plant availability at all times.

Key Responsibilities Area

1. Carry out implementation activities for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, budget and qualification of facilities in accordance with site to approved procedures.

2. Provides specialist advice to other departments and subordinates for trouble shooting / continuous improvements to processes / systems.

3. Maintain the site equipment and facility to high GMP standard meeting the regulatory expectations such that the site is always inspection ready.

4. Implementation and execute of the Product Contamination Cause and Elimination (PCCE) program.

5. Provide input to the project team of capital projects as well as develop and implement the maintenance plan for newly installed equipment.

6. Provide site inputs to the development of Global Engineering Standards (GES).

7. Monitor and enforce compliance measures (including safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.

8. Supervise, develop, and motivate junior staff to help realize their maximum potential so as to contribute towards achieving the objectives of the department.

9. Contribute to the development of the annual operating budget of the section to ensure achievement operational targets of section.

10. Implementation of the GSK Production System (GPS) for Engineering department

11. Responsible for planning and implementing plant maintenance, managing of engineering resources during plant turnaround and prompt resolution of breakdowns, including engaging external assistance.

12. To support the development of facility master plan to ensure compliance to engineering standards, management of obsolescence and asset replacement.

13. Monitor and manage the defined utility system to ensure constant and reliable utility supply to the plant at all times so as to minimize disruption to the production process.

Skills, Knowledge & Experience

• Min degree in engineering
• Min 5 years of instrumentation experience in the process or pharmaceutical industry
• Experience in electrical, planning and scheduling
• Basic awareness of industrial standards
• Good understanding of local codes and requirements
• Familiar and understanding of GSK Global Engineering Standard (GES)
• Basic commercial knowledge & project management skills
• Effective communication & Operational Excellence skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why Us?

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organization where people can thrive. Getting ahead means preventing disease as well as treating it, and we aim to positively impact the health of 2.5 billion people by the end of 2030. ​

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.​

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

JR: 387550

Job Scope

• Follow the customer drawing to prepare the sheet metal process drawings and programs for machines.
• Innovative thinking and problem-solving skills.
• Jigs & fixture preparation
• New product devolvement collaborates with customer R&D
• Follow the procedures of the Quality Management System (QMS) for implementation and control
• Support for audit work & documents preparation

Requirements and Qualifications

• Diploma in Mechanical Engineering or equivalent
• Solid works & AutoCAD knowledge
• Minimum 3years experience in relevant to the sheet metal industries

Project: HDB (new)

Job Description:

• Provide standing supervision as and when directed by Consultant team.
• Witness all inspections, testing and commissioning sessions performed by Sub-contractors to ensure compliance with quality standards, designs and specifications.
• Compile relevant equipment, material, inspection and test certificated submitted by the contractors as required for the project records.
• Ensure company's safety rule is complied with.
• Resolve all site issues and ensure timely completion of the project.
• Ensure all works are carried out in accordance to drawings and specifications.
• Attend site meetings and perform site inspections.
• Prepare weekly/monthly progress reports.
• Any other task assigned from time to time.
• Estimated commencement of work in End February 2024/March 2024

Job Requirements:

• Degree in Civil/Structural Engineering from a recognized university and registered with IES/ACES as a Resident Engineer
• Minimum 5 years experiences as Resident Engineer in precast high rise residential building project.
• Experience in building projects, experience in HDB projects will be an advantage.
• Excellent interpersonal and communication skills
• Preferably conversant with local codes and familiar with local authority’s regulations and requirements

Please submit your full resume, contact number(s), current & expected salary, copies of educational certificates and date of availability in your application

Job Responsibilities:

Client/Contractor Communication:

• Communicate effectively with clients to understand their requirements and expectations for projects.
• Provide technical advice and recommendations to clients on the most suitable solutions for their specific needs.
• Coordination between client, consultant, sub-contractor(vendors) and internal team
• Liaise and carry out evaluation and negotiate with suppliers and subcontractors

Project Management:

Reviews tender documents / requests for proposal to understand project details and requirements.

• Review engineering calculations, specifications, and drawings submitted by subcontractors/vendors/clients.
• Oversee projects from tender, contract award to completion, handling final accounts.
• Provides detailed and accurate quantity and component take-offs against the drawings as specified In the tender document.
• Sourcing materials and send quotation inquiries to the vendors and subcontractors, comparison of quotes, review of prices, to ensure comply to tender requirement.
• Study and identify discrepancies in tender/contract documents and raise queries for clarifications.
• Ensuring all expenses stay within the allocated budget.
• Compile all documents required for submission. Reviews and interprets engineering documentation such as drawings/specifications/scope of works to fully understand the project requirements for detailed and accurate estimating.
• Provide guidance and instructions to other workers or junior staff members.
• To provides timely clarifications for ongoing submission within the tender and request for proposal duration;
• Evaluating all products and processes and ensuring standardization of quality assurance measures.
• Communicates and negotiates competitive rates with Suppliers and Sub-contractors;
• Responsible for tender cost estimation and the preliminary project cost for tender bids and tender summary for management review.
• To prepare the project preliminary cost for the tenders.
• Other ad-hoc duties as assigned.

Requirements:

• Degree/Bachelors and above in Civil Engineering or Equivalent.
• Proficient in AutoCAD, Bill of Quantities, Preparation of Tender Documents, Job Site Permit Application and Microsoft Software.
• Familiar with the latest building/construction design codes, specifications and requirements.
• Min. 2 years’ experience in both construction and facility management.
• Able to communicate with clients and approving agencies for purposes of obtaining design information, presenting design intent and options and expediting approvals.
• Able to liaise and coordinates with other design discipline/departments as well as managing sub consultants in preparation of drawing and reports for submission.
• Able to supervise the team and carry out independent review of submission documents.
• Able to lead a team of workers for projects.
• Singapore Class 3 Driving License.
• Proficient in English.

Those with qualifications/experience as quantity surveyor may apply.