Total 26 maintenance supervisor job vacancies in Engineering category in d22 jurong jurong island tuas

• To have experience working onboard ships or working in a shipyard, minimum 3 years
• To be hold a valid Welder's Certificate
• To be able to read and understand Engineering Drawings
• Shipyard Supervisor certificte is advantageous
• To supervise and organize maintenance and repair works onboard ships

• Assist the Manager to oversee and manage the Engineering Department.
• Technical review on new project orders and order assignments to Technical engineer & Drafter team.
• Ensure timely submission of engineering documents (Control Schematic Drawing, General Assembly Drawing, Wiring Diagram, Nameplate Drawing, Test Procedure, Data Sheet etc).
• To review project engineering documents prepared by Technical Engineer & Drafter team before submitting them to client.
• Provide advice and guidance to Technical Engineer & Drafter team for any technical queries and to support other ops team on various aspects of technical/engineering matters.
• To check and make recommendations based on common industrial engineering practice.
• To provide and implement cost effective and best engineering solutions for project to stay competitive.
• To provide sound engineering practice and engineering calculation where applicable in a timely manner to meet project timeline.
• To review international standards and/or project specifications for product compliance. i.e. ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards etc related to Valve Automation and/or instrumentation.
• Providing field support for customers to resolve after-sales technical issues or technical clarifications.
• To attend internal/external kick off Meeting (KOM) when required.
• Travel with technicians to installation base and sites if the need arises.
• To assist manager to lead the department’s improvement programs and/or process efficiency initiatives.
• To assist manager in maintaining and updating the department's Standard Operating Procedures.
• To carry out Engineering personnel annual performance review to ensure competency and give counselling when required.
• Support new employee orientation by providing brief engineering department process flow training.
• Support and guide the Operations department in resolving aftermarket technical issues such as Product Design changes / Fault Finding / Supplier Discrepancies.

Requirements:

• Bachelor’s Degree / Diploma in Mechanical/Instrumentation or equivalent
• Minimum 6 to 8 years supervisory experience in Valve Automation and/or instrumentation background, preferably in the Valves & Actuators field for Oil & Gas Market.
• Conversant with ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation.
• Possess a strong knowledge of pneumatic and hydraulic circuits.
• Must be able to read and interpret drawings, specifications, and technical documents.
• Knowledge of AutoCAD 2D/3D or drafting software & SAP will be an added advantage.
• Familiar and possess intermediate knowledge in Microsoft Office and Microsoft 365
• Very self-driven and able to drive the team. Possess strong interpersonal skills and can work as a team.
• Strong verbal and written communication skills

• Schedule routine servicing and maintenance of heavy machinery and small equipment - using time based intervals and vision link for CAT
• Arrange/Deploy mechanics for daily repair and breakdown of heavy machinery
• Come up with weekly and monthly report on outstanding and completed jobs
• Liaise with workshop store and purchasing to order spare parts to create service kit for servicing?
• Renewal of lifting certificate and ad-hoc workshop duties as assigned by management
• Candidate must possess at least a Diploma / Degree in any field.
• At least 3 years' relevant working experience
• Required skill(s): MS Office, MS Word.
• Applicants must be willing to work in Benoi Crescent.

Duties and Responsibilities

Carrying out Discipline Commissioning Activities as defined by CONTRACTOR’s Commissioning Leaders and Engineers

Complete PIMS Sheets (ITR Sheets) and ensure that the commissioning activities are carrying out in accordance with approved Commissioning Procedures.

Review and prepare Risk Assessment Analysis of commissioning activities

Execution and recording of commissioning activities

Coordinate with other disciplines regarding engineering issues, carry-over work, and punch list and vendor assistance.

Provide technical guidance to his technician teams during commissioning activities.

Functional Interfaces

VENDOR’s Engineers

CONTRACTOR Mechanical Completion Team/ Pre-Commissioning Team

CONTRACTOR Safety Team

Profile Requirements

Qualification: Bachelor of Science/ Diploma in Engineering

Years of Experience: Minimum 7 years in Oil & Gas industry

Your Mission

This position is responsible for managing machines in HMGICS' smart factory and driving innovation in the creation of self-diagnostic machinery maintenance systems.

What To Expect

• Perform daily patrols, monthly semi-overhauls, annual overhauls, and scheduled maintenance tasks.
• Prepare work reports and deliver them to the next shift.
• Monitor plant conditions (production, downtime) in real-time and report on orders from superiors.
• Respond to emergencies (breakdowns, accidents, fires, etc.).
• Create breakdown reports, including root cause analysis (RCA) and countermeasures.
• Be prepared to work day and night shifts, overtime, early shifts, and respond to urgent tasks, including nights, weekends, holidays, and vacations when requested by the company or superiors.
• Plan and execute activities strictly to achieve the target downtime ratio for the equipment and lines in charge.
• Ensure the availability and readiness of spare parts, with a focus on critical equipment.
• Faithfully perform maintenance duties as required.
• Carry out orders from superiors and report on them at the start, during, and upon completion.
• Be familiar with condition monitoring systems and able to interpret various machinery data parameters.
• Innovate and optimize maintenance plans, including predictive maintenance models.
• Review Prognostics & Health Management strategies to advance smart maintenance.

What You'll Bring

• Bachelor's degree in Mechanical Engineering or a closely related field.
• At least 2 years of relevant machine maintenance experience in the automated manufacturing industry (preferred).
• At least 2 years of experience with pneumatic systems such as SMC and FESTO.
• At least 2 years of experience with reducers from manufacturers such as Alpha, Sumitomo, and SEW.
• At least 2 years of experience in condition monitoring systems.
• Technical knowledge in engines and metal machining.
• Experience in designing small machinery parts (e.g., shafts, blocks).
• A valid driver's license and related equipment field experience (preferred).
• Proficiency in IT skills: MS Office (Excel, PowerPoint, Word), AUTOCAD (for designing small mechanical parts), and 3D CAD (Step, Inventor, Catia).
• Welding certification.
• Experience in lubrication, and maintenance of bearings, fans, and pumps.

Description

Job Summary:

Salary: Up to $2900
Working Days: 5 day work week (Mon - Fri), 8am - 5pm
Location of work: Chai Chee - East

Job Responsibilities:

• To do PLC, HMI, programming with Mitsubishi and Omron brand.
• Handling Mitsubishi and Omron product servo motor products.
• To design automation electrical circuits.

Requirements:

1. Diploma in Electrical Engineering.
2. Experience in handling Mitsubishi and Omron product servo motor products.
3. Understanding and being able to design automation electrical circuits.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified.

Gan Chen Yun
Registration Number: R23116696
EA Licence No.: 06C2859 (MCI Career Services Pte Ltd)

Responsibilities:

• Assessing Vehicle Damage: Evaluating the extent of damage to a vehicle’s body panels, frames, and structures.
• Repairing or Replacing Panels: Fixing dents, scratches, and structural damage by repairing or replacing damaged panels (doors, roofs, bumpers, etc.).
• Welding and Shaping: Using tools to weld, cut, and reshape metal to restore the vehicle's original shape.
• Sanding and Smoothing: Preparing surfaces by sanding and smoothing them for painting.
• Fitting and Aligning Parts: Ensuring that repaired panels and parts are properly aligned and fitted.
• Painting: Sometimes applying primer and working with spray painters to repaint the repaired areas.

Duties and Responsibilities

Carrying out Discipline Commissioning Activities as defined by CONTRACTOR’s Commissioning Leaders and Engineers

Complete PIMS Sheets (ITR Sheets) and ensure that the commissioning activities are carrying out in accordance with approved Commissioning Procedures.

Review and prepare Risk Assessment Analysis of commissioning activities

Execution and recording of commissioning activities

Coordinate with other disciplines regarding engineering issues, carry-over work, and punch list and vendor assistance.

Provide technical guidance to his technician teams during commissioning activities.

Functional Interfaces

VENDOR’s Engineers

CONTRACTOR Mechanical Completion Team/ Pre-Commissioning Team

CONTRACTOR Safety Team

Profile Requirements

Qualification: Bachelor of Science/ Diploma in Engineering

Years of Experience: Minimum 7 years in Oil & Gas industry

About Anywheel

Anywheel is the largest bicycle-sharing company in Singapore, dedicated to providing eco-friendly transport solutions.

Overview

Currently based in the western region, the Shared Bicycle Mechanic Supervisor will oversee a team of mechanics in the maintenance and repair of shared bicycles. This role requires strong leadership skills, technical expertise, and a commitment to ensuring that bicycles are safe and in good working order for use by the public.

Responsibilities

• Supervise a team of mechanics responsible for maintaining and repairing shared bicycles
• Ensure that bicycles are properly maintained and repaired promptly
• Monitor inventory levels of parts and supplies, and order as needed
• Train mechanics on proper maintenance and repair techniques
• Conduct regular quality control inspections to ensure that bicycles are safe and in good working order
• Prepare monthly repair reports for management evaluation
• Review workplace safety standards
• Assist in import and export coordination

Qualifications

• 1 year of experience in bicycle maintenance and repair
• 2 years of experience in a supervisory role
• Technical expertise in bicycle mechanics and repair techniques
• Strong leadership and communication skills
• Ability to work in a fast-paced environment and meet deadlines
• Knowledge of safety regulations and standards related to bicycles

Key Skills

• Leadership and team management
• Time management and organizational skills
• Problem-solving abilities
• Attention to detail and accuracy
• Knowledge of safety procedures and regulations
• Immediate availability

Why Join Anywheel

• Be part of a forward-thinking company dedicated to sustainability and innovation.
• Collaborative and inclusive work culture.
• Opportunities for professional growth and development.
• Competitive compensation and benefits package.
• Work in a lean, dynamic team where your contributions directly impact the company's success.
• Strong decision-making freedom to ideate and implement innovative solutions.

Benefits

• Be part of a forward-thinking company dedicated to sustainability and innovation.
• Collaborative and inclusive work culture.
• Access to networking opportunities within the tech and eco-friendly transport sectors.
• Opportunities for professional growth and development.
• Competitive compensation and benefits package
• Work in a lean, dynamic team where your contributions directly impact the company's success.

• Analyzing the needs of users
• Designing and developing solutions using the software development cycle
• Taking the lead on software development projects
• Leading and supervising other team members
• Testing software solutions
• Documenting software programs with flowcharts, layouts, charts, diagrams and other documentation
• Learning about developments in the field to stay on top of the latest advancements
• Managing the budgets and timelines for projects

Duties and Responsibilities

Carrying out Discipline Commissioning Activities as defined by CONTRACTOR’s Commissioning Leaders and Engineers

Complete PIMS Sheets (ITR Sheets) and ensure that the commissioning activities are carrying out in accordance with approved Commissioning Procedures.

Review and prepare Risk Assessment Analysis of commissioning activities

Execution and recording of commissioning activities

Coordinate with other disciplines regarding engineering issues, carry-over work, and punch list and vendor assistance.

Provide technical guidance to his technician teams during commissioning activities.

Functional Interfaces

VENDOR’s Engineers

CONTRACTOR Mechanical Completion Team/ Pre-Commissioning Team

CONTRACTOR Safety Team

Profile Requirements

Qualification: Bachelor of Science/ Diploma in Engineering

Years of Experience: Minimum 7 years in Oil & Gas industry

Responsibilities:

• Provide maintenance and support for Customers' Enterprise IT Network Services.
• Perform break-fix which include troubleshooting and problem identification for any network services.
• Develop test cases and conduct proof of concept tests on new software and hardware prior to upgrade/deployment.
• Perform the role of Project Lead / Coordinator in project management for small to medium size projects or Service Requests.
• Work closely with Project Manager / Service Delivery Manager to fulfil project deliverables and operational request.
• Establish TAC cases with the principal vendor for complex problem until its resolved.

Requirements:

• Required to have minimum 5 years of hands-on network technical support experience in SI Environment.
• Hands-on experience in LAN/WAN/WLAN: Cisco/Alcatel Switches and Routers.
• Experience working with any of WLC, Unified Communication (IPT & VC), Fortinet, Junipers and Checkpoints, Cisco IPS/IDS, ISE, ACS & ASA, ESA, WSA, SMA, SolarWinds, Cisco Prime Infras, Alcatel Omni-Vista, Infoblox DNS/DHCP, NTP Server, F5 LTM/GTM and A10 LTM.
• Experience with LAN, WAN, WLAN, Data and Security networking in implementation, maintenance support and break-fix.
• Fast-paced environment
• Proven analytical and problem-solving abilities.
• Highly self-motivated and directed, with keen attention to detail.
• Experience working in a team-oriented, collaborative environment.
• Good communication and writing skills.
• Strong customer service orientation.
• Able to work in 24 x 7 standby duties
• Work location: Jurong East.

Responsibilities:

• Supervise a team of telecoms technicians for site execution of pre-commissioning, commissioning, and function testing of telecommunication systems.

• Site management of commissioning shipped-loose items, consumables and spares.

• Ensure that commissioning testing activities are conducted safely and complies with the site PTW and safety regulations and procedures.

• Carry out troubleshooting of faults arising during commissioning tests.

• Submission of commissioning documentation such as checksheets, test procedures, red-line mark-up drawings, etc. completed during commissioning tests.

• Preparation of daily timesheet submissions.

Requirements:

• Diploma / Trade Certificate in Electrical / Instrument or equivalent.

• At least 8 years working experience on telecommunication equipment.

• Experience in testing of PAGA, Radio (VHF, UHF, Marine, TETRA), CCTV, AV

• Equipment, Meteorological System, FO Network, LAN/WLAN, PABX, etc.

• Good leadership, interpersonal and communication skills.

• Able to work independently as well as in a team with strong troubleshooting skill.

• Familiar with Permit –To-Work system and Lock-Out Tag-Out procedures.

• Good understanding of Electrical Safe Working Practices.

• EEHA Certified (COMPEX)Trained.

JFE Engineering Corp. has a long history of financial strength, award-winning building quality, and unwavering commitment to client satisfaction in Chemical Plant Construction. We’re seeking a Civil Engineer with similar values, who can put his or her expertise to work on New Chemical Project Construction site in Jurong Island. This professional will be responsible for serving as the representative of CSB design, and CSB Work planning and supervising at site. He or she will be expected to ensure compliance with all procedures, regulations, and codes, and present progress updates to appropriate management channels on a regular basis. With each project, this individual is counted on to drive the innovation we’re known for.

Objectives of this Role

· Manage, control and monitor of daily construction works. Instruction to the CSB subcontractor and progress control is also included in the daily work

· Supervise all works including CSB and M&E works

· Progress tracking and reviewing of the monthly report submitted by the subcontractor

· Close communication with the subcontractor, and the superior; the site Civil Engineer/Construction Manager/Site Manager

· Attend regular meetings with subcontractors, and the other supervisors of mechanical/piping/electrical/instrumentation work

· Ensure that the works are conducted in accordance with the required quality and safety

· Daily/Weekly/Monthly Report of the work for the client and HQ in Japan

· To coordinate internal and external resources, ensuring projects remain within scope, schedule, and defined budgets, in collaboration with project management team at Construction site in Jurong Island, HQ in Japan and Japanese client.

· Respond to work delays, emergencies, and other project disruptions.

Skills and Qualifications

· Min Degree in Civil Engineering

· Possess working experience of the Petrochemical projects in Jurong Island

· Minimum 5+ years’ relevant working experience

· Good communication skill and leadership to supervise worker and subcontractor

· Excellent skill in BIM and 2D CAD software

· Familiar with the local authority requirement

· Knowledge of jobsite safety practices required

Preferred Qualifications

· Fluent or solid working knowledge of Japanese (The client is Japanese firm)

JFE Engineering Corporation has a long history of financial strength, award-winning building quality, and unwavering commitment to client satisfaction in Chemical Plant Construction. We are seeking Piping Supervisors with similar values, who can put his or her expertise to work on the New Petrochemical Project Construction site in PCS, Ayer Merbau, Jurong Island. This professional will be responsible for overseeing multiple projects at once and serving as the representative at each worksite in dealings with subcontractors, suppliers, customers, and government inspectors. He or she will be expected to ensure compliance with all federal and state procedures, regulations, and codes, and present progress updates to appropriate management channels regularly. With each project, this individual is counted on to drive the innovation we are known for.

Objectives of this Role

· Manage, control, and monitor daily construction works as per approved procedures, approved specifications, and approved drawings. Instruction to the piping and mechanical installation subcontractor. Progress and quality control are also included in the daily work.

· Supervise all works of piping and mechanical works.

· Progress tracking and reviewing of the daily/weekly monthly report submitted by the subcontractors.

· Close communication with the subcontractors and the superior; QC group, the field engineers, the other supervisors, Area Managers, the Construction Manager, and the Site Manager.

· Attending regular meetings with the subcontractors.

· Ensure that the work is conducted following the required quality and safety regulations.

· To co-ordinate internal and external resources, ensuring projects remained within scope, schedule, and defined budgets, in collaboration with the project management team at the Construction site in Jurong Island, HQ in Japan, and Japanese client.

· Respond to work delays, emergencies, and other project disruptions.

· Elevation, orientation, levelness and alignment of Piping/equipment at the site as per approved drawings.

· Documents control, maintaining day-to-day activity records.

· Able to work long hours/ weekends as and when required.

· Line walk, Punch clearance, Hydrostatic testing, flushing, reinstatement and OATT of Piping loops.

Daily and Monthly Responsibilities

· Attend daily/weekly meetings with the subcontractors.

· Review the subcontractors’ daily reports.

· Verify the subcontractors’ progress report.

· Check the tools and machinery for the Subcontractor’s work.

· Watch Manage, control, and monitor daily construction works. Instruction to the piping and mechanical installation subcontractor. Progress and quality control are also included in the daily work.

Skills and Qualifications

· Diploma/Bachelor's degree in engineering or related field.

· 5+ years’ experience in the management of new construction and remodeling projects.

· Knowledge of construction methods and technologies, and ability to interpret technical drawings and contracts.

· Knowledge of API/ASME Piping code requirements and scheduling methods.

· Required certificate of Singapore safety regulation and regular practices for the work (BCSS, SWSHPP, MWAH, SWCSO, etc.). AWSHPP/SWSHPP is mandatory for working at the site of this project.

· Must be physically capable of conducting field inspections and participating in project walks.

Preferred Qualifications

· Fluent or solid working knowledge of Japanese (To maintain excellent communication with Japanese clients)

· Project management experience with emphasis on direct supervision.

Job Responsibilties

• Conducting site construction daily work for project and liaising with the consultants, vendors, contractors on site
• Preparing inspection forms, MSRA, site working schedule, daily site plan, daily report, assisting of Mech Eng/ manager on site document/ forms/report during construction & T&C stage
• Overseeing/ manage/ monitor/ control/ reporting site activities of sub contractors and coordinating on site level with other partners’ sub contractors
• Conduct construction, QAQC inspection/ testing for the area of responsibility as instructed by Mech Eng/ manager
• Attending all relevant WSH activities such as Safety site walk, TBM, audit, safety stand down etc
• Preparing, discuss and coordinate to address safety and health issue daily including identify, rectify, make good, report and closure of any Safety observation, findings, NCs and other safety related issues
• Interact with project technical supports for relevant site work and liaise with other engineer during project execution and commissioning work
• Liaison with local authorities, stakeholders when during site visit related to assign construction activities responsibility
• Coordinate on site logistic, interfacing with cranes, machineries
• Assist Mech Eng/ Manager in preparing of technical submissions of proposal (when needed) including drawing, layout and interacting point requirement
• To attend (if required by superior) the sub contractor meeting and attending any stakeholders, client, partners, authorities meeting whenever is required
• Any other instruction or direction by management
• To work shift and Sat/Sun whenever is required by the Superior. Leave in-lieu will be given base on employment agreement.

Job Requirements

• Diploma in Mechanical Engineering, or 10 years of relevant working experience in the same field
• Familiar with process engineering, mechanical system and their standards in related discipline is an advantage
• Related working experience in thermal power plant, process industries and mechanical handling equipment is an advantage
• Preferred to have heavy equipment lifting, planning and coordination experience
• Having correct working attitude and will be full time working on site
• Experience in BIM and hands-on AutoCad operating will be preferred
• Willing to work in Tuas
• Will be required to work on shifts, and working on Sat and Sunday with leave in-lieu arrangement
• Possession of Singapore Driving License is required. Else, willing to convert the current license to Singapore Driving License
• This is a 2 years contract role.

This is an ad for creators of change!

This is for you who wants to have a real impact on creating a healthier planet for our children every day. At Neste, you will be working for the world’s leading producer of sustainable aviation fuel and renewable diesel and a forerunner in developing renewable and circular feedstock solutions for polymers and chemicals. Let’s create transformation for a sustainable future together.

We are looking for you,

Mechanical Supervisor

to our Maintenance team in Tuas Singapore.

You will focus on Mechanical Supervision . In this job you will work closely with maintenance, operations and asset management.

In our team, the purpose of the Mechanical Supervisor is to provide supervision of contractors consisting of Static, Rotating , Civil or Ad-hoc. This position is responsible for helping the organization achieve maintenance excellence/reliability improvements by providing direction and supervision for the execution of tasks.

Together with you and your expertise, we can make an impact today and keep our promises for tomorrow.

Reasons to join

Real impact right now. We work in an inspiring and evolving business environment, where everything we do serves one purpose: to create a healthier planet for our children. To drive a growing impact as a global leader in renewable and circular solutions we live by our values every day; we care, we have courage, we cooperate.

Safety and caring. We value safety always and everywhere. We want our work to feel good and do good. At Neste, we nurture a culture where everyone is welcome and feels safe, respected and encouraged to be their unique true selves.

Exciting growth. Transformation brings new possibilities and fosters our courage and curiosity. As a global growing company we support personal development with versatile learning and career opportunities. Collaboration is the key, and we believe in flexible, smart ways of working.

More about the job

Your role in our team

MAINTENANCE EXECUTION

• Ensure all aspects of Safety, Environmental, Quality and Cost are being met
• Accountable for execution of all Static, Rotating and Civil maintenance work in accordance with the local Authorities requirement, Industry and Neste rules and regulations.
• Ensures Neste and Contract Resources are available for scheduled jobs and special services. Manage, coach, and facilitate a team to execute maintenance activities. Discuss jobs daily.
• Jointly discusses new job priority with Maintenance Area Lead and Planners.
• Responsible for performing frontline troubleshooting of equipment.
• Shall attend the daily operational and co-ordination meetings.
• Responsible for crossed discipline coordination to complete the principal maintenance task.
• Participate actively in Neste HSSEQ programs to achieve own, contractors, and functional HSSEQ targets.
• Responsible for delivering assigned Turnaround, Project maintenance activities.
• Ensure compliance to the MOC, PHA, PSSR process.
• Understanding, supporting and applying Neste recommended practices for best in class results.
• Responsible for ensuring compliance with technical assurance and maintenance procedures.
• Setting a safety culture to ensure a personal and continuous care around the safety of anyone at site.
• Respond to after office callouts when required.

CONTINUOUS IMPROVEMENT

• Responsible for working closely with team members and soliciting input from all team members on opportunities for improvement.
• Responsible for constantly looking for opportunities to improve cost effectiveness.
• Provides feedback from execution work to the Maintenance Area Lead to improve preventative maintenance plans, optimize productivity, and drive reliability.
• Cooperates with reliability to continuously improve equipment and operational reliability and sustainable work flow processes and systems in a safe and cost effective manner

TRAINING & DEVELOPMENT

• Ensure the indirect reports team members have the proper skills to manage and execute the work they are assigned, work with the technical disciplines and competency development and assurance to develop training plans to supplement weak areas, improve techniques/skills and introduce new equipment.
• Provide feedback for assessing each indirect reports team member to provide assurance on competency.
• Responsible for managing, coaches and motivates the indirect reports maintenance execution team, provides guidance and direction on problems and issues; delegates work assignments considering personal skills and development needs.
• Manage contractor productivity, hourly performance evaluations.

OTHER

• Ensure all documentation is maintained, history is being captured, and any feedback is effectively being utilized. Be prepared for audits of this documentation.
• Contribute to the development of work procedures.
• Responsible for the development and implementation of maintenance effectiveness programs and the tracking of these programs. Looks for opportunities to eliminate low value work and replace it with vital work.
• Works with engineering and/or assist to eliminate bad actors by repair, replacement, or re-engineering. Much of this will be to recognize repeat issues and understand the root cause of issues.To use Root Cause analysis, whether it be for everyday troubleshooting or as feedback to engineers or production.
• Understanding the maintenance budget and working with the PMCs and Maintenance Lead to meet these budgets. They should be able to identify and explain any discrepancy with their budget. Provide support to the Maintenance Lead for budget planning. Must demonstrate fiscal responsibility by being aware of and supportive of maintenance budget and cost performance expectations
• Contributes to the material management strategy setup and update.

Keys to success in this role

• Degree/Diploma in Engineering or equivalent
• At least 3 years relevant experience in refinery and petrochemical
• Prior Experience in Projects, Commissiong, TAs execution
• Knowledgeable with international standards, petroleum /petrochemical plant equipment
• Experienced in maintenance work control, planning, reliability methodologies
• Good communication with strategic thinking, negotiation and business sense

Let’s get you started

Wondering whether we are a match or not? Take a short test at neste.com/game.

We look forward to receiving your CV and application (with a salary request)

We will do our best to contact you within 2 weeks after the application time has ended. The recruitment process will include interviews and a possible aptitude assessment. (The person selected for the position must pass a health examination including a drug test. A security clearance is obtained with their consent.)

About Neste
Neste creates solutions for combating climate change and accelerating a shift to a circular economy. With over 75 years of refining expertise, we are now the world’s leading producer of sustainable aviation fuel and renewable diesel and a forerunner in developing renewable and circular feedstock solutions for polymers and chemicals. We have set aspirational targets for climate, biodiversity, human rights, as well as our supply chain and raw materials. Our ambition is to make the Porvoo oil refinery in Finland the most sustainable refinery in Europe by 2030. Together with our partners we are aiming at a carbon neutral and nature positive value chain by 2040. Our success is created by 5,400 professionals working in 16 countries. Read more: neste.com. Get inspired by our story

Job Description:

• Coordinate and liaise with plant commissioning team on inspection, testing and repair of equipment under the maintenance team as necessary,
• Responsible for managing the maintenance activities by directing and supervising a team of personnel including contractors, supply of materials required to maintain machines and equipment in the prescribed condition.
• Ensuring the implementation of quality and safety procedures & policies, production reliability & efficiency.
• Ensuring best engineering practices by optimum use of manpower, interface & coordination with other departments regarding plant matters.
• Assist on mechanical maintenance work planning and scheduling with the engineer.
• Responsible to make individual job assignments and tracking the progress.
• Ensures quality of work within the set time frame.
• Register, control and maintenance of assets management in CMMS.
• Ensure to maintain adequate inventories of tools, supplies and parts to accurately repair all equipment.
• Ability to work as mechanical fitter on levelling, alignment, grinding, cutting, welding and lifting jobs as necessary if require.
• Ability to work as millwright on service, repair and overhaul of common equipment such as pumps, blower, etc. as necessary if require.
• Coordinate and liaise with contractors in supervision of statutory equipment inspection and testing at site.
• Coordinate and liaise with piping, lifting, scaffolding, insulation, painting and refractory contractors in supervision of piping, lifting, scaffolding, insulation, painting and refractory work at site.
• Perform with maintenance employees along with other technical personnel, contractors to develop proactive and effective team working together to attain set objectives.
• Provide job training and guidance to the workforce including MSRA as necessary.
• Arrange site check, dimension measurement, etc. to assist the engineer on improvement, modification and investment plan works including estimate manpower, tools and equipment.
• Assist manpower to storekeeper on preservation of stock items and inventory check as necessary.
• Conduct routine 5S at maintenance workshop, store and work area at site.
• Other duties as assigned.
• Safety is a core value at Veolia, and a precondition for employment. You are expected to uphold the Veolia Always Safe rules and set an example to all colleagues in your daily work routine
• Ethics and compliance are two areas where our rules and our standards are strictly non-negotiable. You are expected to stick to ethics and compliance rules and standards which ultimately mean doing your job properly and conducting our business like true professionals, whatever our missions and our place in the Group.

Job Requirements:

• Diploma in Mechanical or equivalent is an advantage.
• High School Diploma or minimum 5 years of Maintenance Supervisory experience.
• Good verbal and written communication skill.
• Good working knowledge in Microsoft applications (such as Word, Excel, PowerPoint, Project).
• Experience in using Auto Cad and CMMS (Computerize Maintenance Management System) is an advantage.
• Experience in refractory repair work is an advantage.
• Ability to work weekends, holidays and respond to callouts on a non-routine basis.
• Due to Work Pass Quota limitation, hiring priorities shall be given to incumbents who do not have Work Pass Application needs.

Successful candidate will be working in the main office located at 15 Tuas View Circuit, Singapore 636968. Company transport is provided.

Responsibilities:

• Work as part of a maintenance team ensuring fleet availability for client
• Manage planned maintenance activities
• Conduct troubleshooting of systems onboard vessels
• Supervise and guide workers in mainenance tasks
• Coordinate with suppliers , contractors when required
• Coordinate with Owner Rep on issues pertaining to maintenance task
• Any tasks as directed by Site Manager

Requirements:

• Diploma or NTC in Mechanical or Marine Engineering or related
• Possess knowledge in Mechanical, Engines and Electrical principles
• Able to communicate effectively with internal and external stakeholders
• Able to work during weekends and public holidays and on odd-hours
• Willing to work in Brani area, with company transport provided

Other Information:

• Official Work Hours: 7am - 5pm
• 5 Days Week
• Company Transport provided to Gul

Job Description

Qualification: Diploma / Degree in Civil Engineering

Professional Qualification: Proficiency in MS Office & Auto cad

CAD and AutoCAD proficiency

Database design

Experience: Minimum 3 years

Responsibilities:

• Timely completion of project work maintaining the quality of work at every stage,as per technical specifications & working drawings.
• Insight daily activities with safety & security at the site.
• Handling emergencies appropriately according to established procedures.
• Documentation of day-to-day progress & preparation of construction schedule.
• Periodic reconciliation of materials.
• Maintains project database by writing computer programs, entering data, and completing backups.
• Contributes to team effort by accomplishing related results as needed.
• Manage labour and check the execution meet the time line.
• Report the Daily activities to the Project Manager

Job Description

1. Deploys Engineering decision-making to troubleshoot and resolve mechanical equipment breakdowns
2. Identify and address potential issues before they escalate to prevent unplanned downtime.
3. Achieving 0 LTIF target through ensuring safety procedures are followed through SOP, TRA, employees wearing full PPE during work, developing safety procedures
4. To support the section in terms of external resources/vendor management
5. To drive safety, cost, energy and reliability improvement projects in MSP through application of Mechanical integrity and quality assurance
6. Recommend and implement modifications or upgrades to enhance machinery reliability.
7. Maintain accurate records of maintenance activities, including repairs, replacements, and inspections.
8. Perform root cause analysis and work towards resolutions
9. Oversee all required engineering qualification tests on project; ensure compliance with all outside parties involved
10. Participate in test runs and field installations
11. Analysing and interpreting data
12. Stay updated on industry trends, new technologies, and best practices in mechanical maintenance.
13. Provide training to maintenance technicians and operators on equipment usage and maintenance procedures

Job Requirements

1. Bachelor's degree in Mechanical Engineering or related field.
2. Proven experience of supervising and managing mechanical site activities for large scale manufacturing project from inception to completion.
3. Strong knowledge of mechanical systems, hydraulics, pneumatics, and rotating equipment.
4. Possess strong leadership.
5. Possess strong orientation towards results.
6. Effective communication, both in verbal and written form English and Chinese.
7. Possess good teamwork capabilities
8. Possess good project and time management.
9. Ability to work to an ethical code of conduct

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there’s no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that’s the kind of work we want to be part of.

Did you know that we are the 1st biologics contract manufacturer in Singapore? We offer you exposure to upcoming biotech and established pharmaceutical companies and to the manufacturing technology needed to produce mammalian treatments and cell therapies of tomorrow. Our global manufacturing network is recognized for its reliable, high-quality services, regulatory track record, global footprint, innovative technology platforms and extensive experience – we, in Singapore are proud to be part of this global network.

Lonza is currently looking to hire a Associate Engineer, Maintenance. Role is responsible to execute daily routine and repair work orders as assigned. The role will perform basic troubleshooting equipment breakdowns and carry out basic repairs on production equipment/ systems or report back to Engineer/Manager. Position will escort vendors/service providers for routine maintenance work to ensure equipment is maintained in full operational status. And promptly inform the Engineer/Manager of any incidents or events, irrespective of the nature and severity.

Key responsibilities:

• Execute daily routine and repair work orders as assigned.
• Be vigilant on safety to ensure jobs are done in a safe way and maintaining a high level of GMP compliance.
• Ensure all maintenance works are duly carried out as scheduled and in compliance with Engineering standards and procedures.
• Perform shift if required and respond on-call for maintenance/service breakdown and support ongoing operations.
• Basic troubleshoot equipment breakdowns and carry out basic repairs of production equipment/ systems or report back to Engineer/Manager.
• Escort contractors, vendors/service providers for maintenance work to ensure equipment is maintained in full operational status.
• Promptly inform engineers of any incidents or events, irrespective of the nature and severity.
• Keeps all areas clean and well organized
• Communicate to Engineer/Manager when encounter non-compliance issues including work delay, breakdown, missing parts etc.
• Carry out any other duties as assigned by Engineer/Manager, inclusive but not limited to the above.

Key requirements:

• A Diploma or a relevant Trade certificate with relevant work experience in process equipment & maintenance in Pharmaceutical/Biotechnology, Medical, Semiconductor, O&G industry.
• Hands-on production equipment’s/systems operations, repair and maintenance experience in Biopharma, Pharmaceutical or a relevant environment.
• Strong problem solving and troubleshooting skills.
• With strong hands-on technical skills or willing to be hands-on on Utilities system/ process equipment.
• Detailed and Quality conscious.
• Ability to follow SOPs and instructions.
• Diligent in performing operational checks.
• Able to work independently.
• Ability to lead a small group of contractors for PM.
• Willing to lead and support on maintenance continuous improvement projects.
• Good Communication skills.
• Excellent Team player.
• Able to work on rotating Shift.

Every day, Lonza’s products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically.

People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference.

Duties and Responsibilities

Carrying out Discipline Commissioning Activities as defined by CONTRACTOR’s Commissioning Leaders and Engineers

Complete PIMS Sheets (ITR Sheets) and ensure that the commissioning activities are carrying out in accordance with approved Commissioning Procedures.

Review and prepare Risk Assessment Analysis of commissioning activities

Execution and recording of commissioning activities

Coordinate with other disciplines regarding engineering issues, carry-over work, and punch list and vendor assistance.

Provide technical guidance to his technician teams during commissioning activities.

Functional Interfaces

VENDOR’s Engineers

CONTRACTOR Mechanical Completion Team/ Pre-Commissioning Team

CONTRACTOR Safety Team

Profile Requirements

Qualification: Bachelor of Science/ Diploma in Engineering

Years of Experience: Minimum 7 years in Oil & Gas industry

Job Description:

1. Oversee and manage precious metal recovery operation and wet chemical operations, ensuring optimal performance of process operation.
2. Provide technical assistance and support technical manager and R&D team to develop precious metal recovery solutions and provide technical advice for sales department.
3. Identify and resolve technical issues. Plan, schedule, and oversee preventative maintenance programs, ensuring the optimum operation efficiency and reliability.
4. Assist in planning, coordinating and overseeing technical projects. Ensure the projects are completed on time within budget.
5. Manage budget and expenses related to technical operations, optimizing costs without compromising quality.

Job Requirements:

1. Minimum Degree; Engineering or Chemistry field preferred
2. 5 years and above working experience in precious metal recovery industry.
3. Expertise in chemical leaching process and PGM recycling operation.
4. Ability to prioritize tasks, manage projects and work efficiently under pressure.
5. Self-motivated and team player.

Others:

1. Salary: S$4,100 - $4,800 + Benefits
2. Working hours: 5 work week (Mon-Fri: 8am – 5pm)
3. Company Transport is provided.

Responsibilities:

• Work as part of a maintenance team ensuring fleet availability for client
• Manage planned maintenance activities
• Conduct troubleshooting of systems onboard vessels
• Supervise and guide workers in mainenance tasks
• Coordinate with suppliers , contractors when required
• Coordinate with Owner Rep on issues pertaining to maintenance task
• Any tasks as directed by Site Manager

Requirements:

• Diploma or NTC in Mechanical or Marine Engineering or related
• Possess knowledge in Mechanical, Engines and Electrical principles
• Able to communicate effectively with internal and external stakeholders
• Able to work during weekends and public holidays and on odd-hours
• Willing to work in Gul area, with company transport provided

Other Information:

• Official Work Hours: 7am - 5pm
• 5 Days Week
• Company Transport provided to Gul