Total 12,699 Others/Any job vacancies in ngee ann polytechnic clementi campus

Listed in Asiaone for High Preschool Teachers Retention Rate

(50% of our teachers have been working together for more than 10 Years)

Job Description

Eng Preschool Teacher (For Pre-Nursery to Nursery Class)

· Implement preschool curriculum in line with school's teaching philosophy

· Prepare age and developmentally appropriate teaching aids

· Maintain and build relationships with children and parents

· Assist with planning, share ideas and exchange feedback with the entire team

· Positive discipline techniques at all times

We are looking for someone with:

· Passion & Patience for teaching young children

· A Diploma in Pre-School Teaching (DPE-T) or a Diploma in Early Childhood Care and Education (DECCE-T) or equivalent qualifications

· A Bachelor’s degree in early childhood education are also warmly invited to apply

· Experienced teachers are welcome

We offer:

· Beautiful and spacious teaching and learning environment

· Happy and healthy working environment

· Low staff-child ratio

· Incentives include up to 24 hours in TIME BANK in addition to 14 Days leave

· Bonus incentives based on capacity of enrolment

· Medical benefits

Interested applicants are invited to apply

Nearest MRT : Beautyworld MRT

Bus : 173

StarFive is a leading provider of RISCV processors, platforms and solutions. StarFive products are widely used in smart home appliances, smart monitoring, industrial robots, traffic management, intelligent logistics, wearable devices, solid state storage, network communications and edge computing, etc.

We are intensively designing next generation high performance RISC-V CPU and RISC-V-based SoC chips. Talents who are passionate in research and development for future chips are welcomed to join us. Being part of this vibrant team, you can produce world class successful commercial chips supported by efficient software stacks.

Responsibilities:

• Participate in the micro-architecture design and/or implementation of SoC subsystems such as multicore processors, cache, and interconnect
• Work with senior architects to optimize the performance, power, and area of the SoC subsystems
• Architectural modelling/simulation, performance analysis, and identifying bottlenecks
• Maintain and automate the development environment

Qualification：

• BS/MS/Phd in Electrical & Electronic Engineering, Computer Science or related fields.
• Basic knowledge of computer architecture, such as CPU micro-architecture, multicore processing, network-on-chip, memory hierarchy
• Competent in C/C++ coding skills, including OOP, Data Structures etc.
• Familiar with basic software engineering skills
• Experienced with version control systems like git/mercurial
• Any of following skills is a plus

1. RTL design (Verilog/VHDL/Chisel)
2. Assembly language programming (x86/ARM/RISCV)
3. Scripting in python etc

• Eagerness to learn, good communication and collaboration skills
• Fresh Graduates are welcome

[About us]

The JGC Group, headquartered in Japan, has played on important role in providing solutions to a wide range of social and industrial needs, not only in Japan but in areas around the world. These businesses include total engineering of plants and facilities for energy and infrastructure industries. Especially notable is its success in carrying out more than 20,000 projects in 80 countries, which has established its reputation as one of the premier engineering contractors in the world.

In order to achieve further development of the group's business as a whole, we are implementing a major reorganization in which our Singapore-based company named JGC Asia Pacific Pte. Ltd. (JGCAP) be positioned as a regional headquarters to oversee group companies in the APAC region. With this reorganization and transformation, we are looking for a new 'Business Project Manager', who are required to act as the top of newly-established organization responsible for business development and its project management in new business domains (in areas of chemicals, life sciences, pharmaceutical, industrial and urban infrastructure, etc.).

[Job Description]

• Work closely with Director of the company, as a lead of new organization, to develop sales and project development/management strategies and drive its execution for business expansion to achieve the company's targets.
• Take a lead for sales activities, concurrently as technical sales, to customers together with Director and sales team of the company covering Singapore and its neighbouring markets in APAC region to penetrate new business domain.
• Work closely with Director and sales department of the company, from the viewpoint of technical aspect, interpret market segment information and secure business opportunities in new business domains in Singapore and its neighbouring countries in APAC region.
• Take a lead of a series of process from development of project by eliciting needs from customers and making proposals, to receiving orders and successfully executing them, including;

1. Evaluate, screen, review and make decisions on whether or not to work on the project.

2. Negotiate several conditions of contract with clients.

3. Initiate and responsible for organizing a team and execute estimation work & project operation.

4. Collect execution data and conducts a post-implementation review internally.

• Responsible for project management and execution of all types of PJ (FEED and EPC such as, conceptual design, basic & detailed engineering, procurement, construction and commissioning) in the field of new business domains.
• Communicate with various stakeholders, including partners, vendors, subcontractors, relevant government agencies and customers (including existing and new customers) in Singapore and across the APAC region to build and maintain trusting relationships.
• Manage and ensure sound performance (including cost, time, quality and safety) in the projects carried out by the organization. The role is expected to report to the Director on a regular or as-needed basis on the performance of the projects as required to achieve the goals of JGCAP and the Group as a whole.

[Job Requirement]

• 10+ years of experience in managing EPC projects in the oil & gas or industrial and urban infrastructure related industry.
• In-depth working knowledge of industrial code and standards commonly applied to oil & gas EPC project such as API, ASTM, IBC is a must.
• At least 3 years of experience in Feasibility Study, Front-End Engineering Design, and EPC projects in the oil & gas or industrial and urban infrastructure related industry as a Project Manager.
• At least 10 years' experience of client-facing and communication in the oil & gas or industrial and urban infrastructure related industry, as well as experience of leading the communication with 3rd party vendors or subcontractors for effective execution of projects.
• Proven track record of developing project and winning orders through several approach of proposal to client.
• In depth knowledge and experience in Lump-Sum Turn Key-basis EPC project in the Asia-Oceania region.
• Experience of leading a team of more than 30 employees.
• Excellent interpersonal and analytical skills with the ability to think "outside the box" to solve problems.

*Due to our limited capacity, please note that only shortlisted candidates will be contacted individually.

*Please provide true and correct information to the best of your knowledge to our screening questions.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking one (1) talented postdoctoral researcher to join the Synthetic Biology Translational Research Programme (TRP) at the National University of Singapore Yong Loo Lin School of Medicine. The Synthetic Biology TRP aims to develop novel genome editing tools, specifically by engineering existing CRISPRs, enhancing functionality through combinations with other enzymes, and screening desired mutants from the library via directed evolution.

The Research Fellow/s (RFs) will collaborate closely with the Principal Investigator and the research team to develop CRISPR tools. Appointments will initially be made on a 1-year contract, with the possibility of extension. PhD holders with no experience are welcome to apply.

The Research Fellow is expected to:

1. Rationally design protein engineering sites and conduct various library generation experiments (e.g., error-prone PCR, site saturation mutation) to create a library with high diversity;
2. Test CRISPR in various mammalian cell lines and measure indel efficiencies using Next Generation Sequencing tools;
3. Mentor research assistants, graduate, and undergraduate students;
4. Assist in any other duties delegated by the Principal Investigator and group leaders.

Qualifications

The applicant should:

1. Hold a PhD in Biotechnology, Biological Sciences, Biochemistry, or related disciplines;
2. Have extensive knowledge and hands-on experience on genetic parts assembly, pathway engineering, microbial strain engineering, fermentation, recovery and analytics of targeted metabolites;
3. Have the ability to design and perform experiments for microbial strain engineering, gene expression, protein expression, enzymatic assays, microbial fermentation, and product recovery;
4. Know how to work independently and in a team, have an investigative nature and a strong attention to detail;
5. Possess an established record of international publications

Remuneration will be commensurate to the candidate's qualifications and experience.

Informal enquiries are welcome and should be made to

Ms Suhana Sulaiman, at [email protected]

Formal application: Please submit your application, indicating job reference number and current/expected salary, supported by a detailed CV (including personal particulars, academic and employment history, complete list of publications/oral presentations and full contacts of 3 referees).

A*STAR Infectious Diseases Labs (A*STAR ID Labs) is seeking for a Research Officer to join us in our mission to be a leading centre of infectious diseases research. A*STAR ID Labs aims to develop a cohesive A*STAR response to drive and deliver translational infectious diseases research to better health and economic outcomes.

Job Description:

• To focus on bridging the knowledge gap of vector–pathogen-host interactions in mosquito-borne disease transmission. To understand the immune and pathogenic mechanisms during mosquito borne-virus infection to guide the development of targeted and effective control and treatment strategies

• Conduct laboratory experiments in vaccine/drug testing and perform data analysis for industry/research collaboration projects

• Work with patient cohorts and relevant models (both in vitro and in vivo) of infectious diseases

• Perform meticulous recordkeeping and able to draft delivery report to industrial partners

• Perform maintenance of inventory and procurement of laboratory consumables

• Ensure safe technical practices and procedures

Job Requirements:

• Bachelor Degree in Biomedical Sciences, Biochemistry, Life Sciences, Biological Sciences, Infectious Diseases, Microbiology, Immunology, Biochemistry or related field
• 1 to 2 years of relevant experience, fresh graduates are welcome to apply
• Experience with cell culture models, mouse models, animal studies, cell biology, flow cytometry, serological and molecular techniques, handling with BSL-2 and BSL-3 pathogens will be an asset
• Experience with industry project management
• Strong background in Microbiology, Immunology, Molecular Biology, Biochemistry, Genetics and Genomics
• Highly motivated and able to work independently
• Team player with good interpersonal skills
• Good spoken and written communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Assistant/Associate Professor

DEPARTMENT OF COMPUTER SCIENCE

Location: 510 Dover Road, Singapore

Description: Full-time Assistant Professor in Department of Computer Science, DigiPen Institute of Technology Singapore. We expect to make an appointment at the Assistant Professor Level or higher, commensurate with the candidate’s academic credentials and prior experience.

Responsibilities:

• While teaching some combination of the above subjects as determined by the selected candidate's unique synthesis of interests, he/she is also expected to teach general computer science subjects (such as operating systems, data structures, design and analysis of algorithms) at the university level. Other responsibilities include academic advising, undergraduate research advising, curriculum development, institutional service and appropriate scholarly activity.

Education and Experience Qualifications:

• PhD degree in Computer Science, Computer Engineering, or a closely related field.
• At least 4 years of industry or research experience in the field of study or a closely related area.
• Strong background in one or more following areas: C/C++ programming, Computer Graphics, Computer Architectures, Parallel Processing, Computer Networks, VR/AR, Computer Vision, Data Analysis, Distributed Computation, Cyber Security.
• Work/Teaching experience or exposure to one or more following areas: game/interactive-simulation, AI, machine learning, computer vision, data science, image processing, etc.
• 2D/3D graphic programming (OpenGL or DirectX) is an added advantage.
• A commitment to teaching excellence and scholarship is also expected.

Starting Date: Immediate

Salary: Salary is competitive and commensurate with experience and education.

Application: Review of applications will begin immediately and continue until the position is filled. For a complete application, please email a letter of interest, curriculum vitae, and statement of teaching philosophy, transcript of highest degree earned, and three letters of recommendation.

Electronic submission is required with documents in either Word or PDF format attached to an email and sent to:

Email: [email protected] with subject line “Full-time Faculty of Computer Science”.

Established in 1973 with headquarters in Seoul, South Korea, Cheil Worldwide is one of the world’s leading integrated marketing communications networks, with more than 6,800 employees globally in more than 54 offices in 46 countries.

For more information, visit us at: www.cheil.com.

Cheil is expanding and we are inviting candidates to join our growing team. Reporting to Senior Digital Strategy Director, we are looking for candidates for the following position:

Performance Marketing Manager

As the Performance Marketing Manager, you will play a pivotal role in developing and executing our paid media strategy to drive customer acquisition, revenue growth, and brand visibility. You will lead a media planning and operation and collaborate with cross-functional teams to achieve our marketing goals.

Responsibilities:

· Paid Media Strategy: Develop and implement a comprehensive paid media strategy that aligns with company objectives.

· Team Leadership: Manage and mentor a team of performance marketers, fostering a culture of continuous learning and improvement.

· Campaign Management: Oversee the planning, execution, and optimization of paid advertising campaigns across various channels, including Google Ads, Facebook Ads, TikTok, Meta, DV360, and others.

· Data Analysis: Monitor and analyze campaign performance metrics using tools like Adobe Analytics or Google Analytics to make data-driven decisions and refine strategies.

· Ad-Tech Expertise: Utilize ad-tech tools, media pixels, and Customer Data Platforms (CDP) to target audiences effectively and optimize campaigns at an advanced level.

· 360-Degree Digital Touch Points: Leverage a deep understanding of consumer behavior across web and app platforms to maximize digital touch points.

· Client Communication: Use excellent communication and presentation skills to effectively address business challenges for clients and stakeholders.

Qualifications:

· At least 5 years of experience in performance marketing field

· Bachelor's degree in Marketing, Business, or a related field

· Years of experience in performance marketing, with a proven track record of managing successful paid media campaigns.

· Enthusiastic about learning and staying updated with industry trends.

· Strong self-motivation with a focus on achieving business growth and taking ownership of projects.

· Proficiency in digital analytics tools such as Adobe Analytics or Google Analytics.

· Hands-on experience with various ad platforms including TikTok, Meta, DV360, and Google Search.

· Knowledge of ad-tech tools and the ability to leverage them for audience targeting and campaign optimization.

· Strategic media planning capabilities with a 360-degree digital touchpoint approach.

· Excellent communication and presentation skills to solve business challenges for clients.

ENGIE Service Singapore is a leading provider of Integrated Facilities Management solutions (IFM), property management, operations and maintenance, specialized rail engineering works, sustainable solutions and FM Consultancy services. With strong presence in various counties across South East Asia, we operate across mission-critical industries - aviation, transportation, healthcare, education, government and commercial.

ENGIE understands the integrated role of facility management and the value of it can be expanded beyond the traditional approach. As a total FM, specialized engineering and sustainable real estate solutions service provider,

ENGIE offers a comprehensive range of technical, digital and support services customisable to best suit your unique needs.

Responsibilities:

• Report to Senior Manager
• Overall project management responsibility of all the site activities and progress, project quality plan implementation, on time completion of the project.
• Co-ordination with client and contractors on all site matters pertaining to all section
• To meet contractual, technical and project completion milestones within budget and on time.
• Implementation of QEHS policy on site and ensure that all site staff understands and adhere to all aspects of the policy
• To manage all team for all site activities, coordination and supervision works.
• Provide technical guidance and advice to installation team to ensure the quality of works and installation method according to good engineering practices.
• Liaise with consultant, clients, authorities and contractors.
• Comply with company regulations and work practices at all times; ensure all the project activities meet legal and statutory requirement in technical aspect.
• Monitor / review operational costs and responsible for financial performance of projects

Requirements:

• Minimum a recognized Bachelor Degree in Engineering or equivalent with at least 10 years of relevant experience.
• Ability to understand electrical circuit diagrams and mechanical assembly drawing and troubleshooting of installed system will be an added advantage
• Self motivated, hand-on and passionate with strong analytical skills to work in a dynamic environment.
• Responsible and diligent, competent and capable of navigating difficult situations.
• Positive work ethic and display conviction.
• Commitment and able to discharge his duties with pride.
• Invaluable contribution to the Rail department
• Ability to work independently, under pressure and meet tight deadlines
• Good interpersonal and communication (both written & verbal) skills

● Responsible for all food prepared at all kitchen outlets

● Responsible for menu planning and functions as well as menu changes and updates

● Ensure that the standard recipes are followed throughout all outlets

● Keeps food cost under control

● Responsible for liaising with human resources in recruiting chefs for the kitchen

● Keeps high standards of food production

● Responsible for hygiene and sanitation of all outlets

● Training and coaching of kitchen staff

● Responsible for administrative handling regarding the kitchen department

● Controls food requisitions and market list

● Checks acidulation and amortization of food

● Tests new available items

● Checks staff food preparation, quality and quantity

● Informs all chefs about complaints and improvements to be made

● Filling out attendance record, preparing work schedule and vacation planning for kitchen chefs

● Attends weekly F&B meetings & hold kitchen briefing

● Supervises and checks portion sizes, stations, fridges and perishables.

● Checks spoilage and return of usable items

● Checks personal cleanliness of staff and cleanliness of kitchen

● Ensures effective control of kitchen and labour costs and reports to the Managing Director

● Managing ERP related tasks and responsibilities as required in the role

● Makes the yearly Kitchen budget.

● Safeguards and handles all restaurant property as per set standards of the restaurant.

● Complies with restaurant’s hygiene, health and safety policies

Primary Function : To provide general sales support services in meeting all deadlines and undertaking all administrative work of the department with professionalism.

Main duties and responsibilities:

1. To handle inquiries and ensure quotations are furnished to customers on time.
2. Processing of orders within the dateline and consolidate customer’s requirements ensuring on time delivery.
3. Liaise with customers for delivery timings and locations.
4. Filing of invoices and other related documents.
5. Undertake any other duties in relation to the job scope as assigned by your superior from time to time.

Requirements:

• Minimum: GCE O Level
• Basic Microsoft application especially Excel & Word
• Able to converse effectively both in English & Mandarin.
• Friendly & courteous disposition with a team player spirit.
• Ability and patience to handle high pressure environment.
• Knowledge of Singapore Customs permits will be an advantage but not a necessity as training will be provided.
• Once or twice a month weekend shift (Sat & Sun) from 9am to 1pm and also on public holidays when applicable (also on rotation).
• Preferably with a declarant license.

Position Description:

The Client Services Manager acts as a primary business contact between the client and the company. The CSM builds and maintains business relationship to encourage new and repeated business opportunities. The CSM is expected to meet the client’s need and communicate it and ensure the completion of it.

Responsibilities:

• Establish professional relationships with the assigned customer accounts.
• Understanding of company’s product service, and effectively communicate the available offerings to the client.
• To assess, clarify, and validate customer needs on an ongoing basis.
• Contract renewals for an existing client.
• Responsible for all client communications.
• Ensure quality standards and client expectations are met.
• Ensure that client issues are dealt with in an efficient manner, informing the team.
• Prepare proposal, handle invoices and responsible for payment collections.
• Work closely with the project team in order to maintain a continuous knowledge of project status in order to identify potential issues and/or opportunities within the project.
• Communicates the client's interests to the team.
• Provide regular two-way communication between the client and the company
• Prepare weekly reports on calls and other activities to the immediate manager.

Requirements:

• Minimum diploma holders
• Proficient in Microsoft Office application and network
• Motivated, goal oriented and a skilled negotiator
• Excellent in Account Management skills to maintain and enhance customer relationships
• Minimum 1 year of Account management experience
• Ability to manage time and prioritize in effective manner
• Pro-active and self-driven
• Excellent oral communication skills
• Plans and carries out responsibilities with minimal direction.

Reporting to the Director Air Traffic Controller (ATC) & Digital, the LORADS-III Program Manager is responsible for the performance of the LORADS-III Program within the ATC & Digital Segment including program delivery, business growth, budgeting, financial reporting, people management and development.

As a Program Manager, you are accountable for:

Leading, developing and managing the LORADS-III Integrated Program Team (IPT) to achieve agreed growth, sales, profitability and customer satisfaction. This includes:

• Safe delivery of projects and services with a focus on the development of a strong safety culture;
• Delivery of contractual commitments with a focus on ‘on-time’ delivery and the achievement of baseline project margins;
• Reporting of progress to senior management and senior customer stakeholders;
• Develop & maintain customer intimacy and customer satisfaction;
• Work collaboratively with the Head of ATC Services Delivery and the Services team in the global Segment to deliver best practice capability and globally alignes solutions with the objective of optimising cost, On Time Delivery (OTD) and quality with the best possible commercial outcomes;
• Support the development and implementation of best practice approach to Bid and Project activities;
• Ensure that the relevant Thales policies, procedures and governance are adhered to with the sector, with a particular focus on PP&E and HSE compliance;
• Demonstrate leadership that inspires and promotes Thales’ leadership model in a manner that represents a stewardship role for company culture;
• Provide effective leadership, communicating strategy and objectives and providing a working environment that encourages staff development and active participation within the sector;
• Mentoring and coaching of junior staff;
• Program workforce planning with a focus on the management of an Integrated Program Team;
• Ensure direct reports deliver results by providing feedback, advice and direction through the Check-In process; and
• Act as single point of escalation for all personnel delivering to the LORADS-III Program.

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

• Degree qualified in business, engineering, project management or other suitable discipline.
• IPMA-B Certification or ability to secure certification.
• Proven and effective leadership skills with a high level of interpersonal and verbal communication skills as well as the ability to manage multi-disciplinary teams.
• Demonstrated Project Management experience delivering in a multi-disciplined, multi-cultural and multi-entity operating environment.
• The confidence and maturity of judgement to represent the company at senior levels with customer organisations both nationally and internationally.
• Exceptional written communication skills including authoring content and editing.
• Strong internal stakeholder management in a matrix organisation.
• Strong customer focus and external relationship management.

DESIRED EXPERIENCE

• IPMA-B Certification or ability to secure certification.
• ITIL framework or other services framework experience.
• Experience in Project Managing ATM products, systems and/or services delivery in an international environment.

Responsibilities:

• Transporting of goods island wide in a timely manner
• Ensure goods that are delivered tallies with the orders placed by customers
• Any other duties as assigned

Requirements:

• At least 1 or 2 years of work experience in warehouse environment
• Experience in manual handling of products
• Possess Class 4 Driving Licence
• Delivery drivers are not allowed to drive back the vehicles.
• Candidate can start immediately or with short notice

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focusses on developing the technology and demonstrators for Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave passive and active circuits and subsystems.

Note: a design portfolio showcasing RF designs must be attached to the resume.

Qualifications

• Possess a PhD in Electrical Engineering
• Several years of experience in the simulation and design of microwave circuits and subsystems.
• Experience in the design of LNA, PA, mixer, control circuitry and antennas.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Purpose

National Cybersecurity R&D Laboratories (NCL) is looking for hiring one creative cyber security R&D engineer who experienced on handling IT/OT/IoT program development, project operations, network security infrastructure of ICS and network system. The engineer will participate in NCL’s IT/OT Cyber Exercise, help to build NCL’s ICS environment/testbed and provide technical support for NCL’s VAPT developing project.

Job Description

• Deploy and maintain cloud-based computing system and network infrastructure.
• Design, setup, configure and troubleshoot network systems.
• Setup, configure, and troubleshoot server systems with different operating systems (Windows, Ubuntu).
• Perform a regular backup of data and application systems.
• Working with other parties (e.g., vendor, provider, ...) for the deployment and troubleshooting.
• Prepare and provide technical support to the end-users and other team members.
• Analyze critical logs, investigate, and troubleshoot technical issues.
• Implement and continuously update security patches for operating systems, servers and network devices to avoid security issues or attacks.
• Ongoing assessment of new threads and improve on computing security.
• Develop and deploy monitoring system for infrastructure.
• Ensure high availability of services through regular server and network maintenance.
• Perform and participate in capacity planning, redundancy planning and execution of Disaster Recovery Plan.

Qualifications

• Minimum three (3) years of relevant working experience.
• Experienced in Virtualization technologies (VMWare, VirtualBox, KVM etc).
• Experienced in complex secured network design, VPN and WLAN implementation.
• Has knowledge in network devices administration (e.g., Firewall, Router, VLAN, Switch etc).
• Familiar with Windows and Linux OS (Ubuntu, CentOS, Redhat etc).
• Able to configure secured Internet services with methods/protocol (e.g. HTTPS, SSH Tunneling, L2TP/IPsec etc).
• Familiar with data storage systems (e.g. FreeNAS, LTO, NFS etc.) and data backup operations on multiple File Systems.
• Enthusiasm for problem-solving and able to work in a fast-paced environment.
• Strong interpersonal skills with the ability to communicate effectively.
• Able to write automation script (e.g. Bash, Python, Ansible etc).
• Experience in private and public cloud environments (e.g., OpenStack, AWS etc).
• CCNA (Routing and Switching) or equivalent certification.
• Experience working with the open-source project.
• Able to write simple code in Python or Java.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

Research Group Overview:
Our research group at Faculty of Dentistry, National University of Singapore (NUS) laboratory is primarily focused on developing next-generation methods and multidisciplinary tools for dental and craniofacial research. In particular, we focus on combining the expertise in stem cells, tissue engineering, microfluidics, organ-on-a-chip, 3D bioprinting and non-invasive imaging for regenerative applications.

Responsibilities:
The multi-disciplinary research project focuses on developing microfluidic organ-on-a-chip models and 3D bioprinted constructs for dental applications. We are seeking a motivated and dedicated full-time, research assistant with an understanding of microfluidics, 3D culture, and 3D bioprinting process. This research will be primarily conducted at the Faculty of Dentistry, National University of Singapore (a multi-disciplinary, vibrant campus recognized for its outstanding reputation for translational research).

Primary responsibilities include:
- Microfluidic design and fabrication.
- Bioink formulation, and 3D bioprinting.
- Operate 3D bioprinters independently.
- Manage the optimization, development and characterization of microfluidic organ-on-a-chip devices.
- Manage the optimization, development and characterization of hydrogels, bioink formulation, 3D bioprinting, and tissue culture processes.
- Handling of stem cells, 3D culture, biomaterials and variety of molecular assays, histological and imaging techniques.

Other responsibilities include:
- Identify and coordinate with external vendors for resource procurement.
- Closely interact with multi-disciplinary collaborators including clinicians, biologists, and engineers.
- Rigorous documentation of experimental procedures and data.
- Communicate results and data in a timely and effective manner.
- Assist in project management and laboratory administration.
- Contribute to preparing manuscripts, research proposals, grant applications, and agreements.

Salary and benefits are commensurable to educational qualifications and working experience of the candidate.

Qualifications

• Bachelor’s/ Master’s degree in Dentistry, Bioengineering, or related field.
• 1-2 years’ working experience in microfluidics, bioink fabrication, 3D printing, and/or tissue engineering will be preferred. Longer working experience is expected for Bachelor’s candidates.
• Working experience in cell culture and handling of stem cells, molecular biology techniques will be preferred.
• Proficiency in 3D design, AutoCAD, COMSOL, or related applications would be preferred.
• Evidence of first-authored original research publications in the field of microfluidics, 3D bioprinting, and/or tissue engineering will be preferred.
• Strong organisational, literature review, administrative and problem-solving skills.
• Highly self-motivated, ability to work both as part of a team and independently with excellent presentation and communication skills (both written and verbal in English).

Our team at ATIPICO thrives on passion and love for excellence. We are a team of curious, detail oriented individuals, all coming from various backgrounds, sharing a common belief in the value of true hospitality. We approach all our customers with attention and a sensitive, personal touch.

We are seeking a dynamic and organised individual to join our team and oversee the planning and execution of our F&B events. The ideal candidate will have a strong background in hospitality, event management, and knowledge in food and beverages. The Events Operations Manager will be responsible for coordinating all aspects of F&B events, ensuring seamless execution and exceptional guest experiences.

Event Planning and Coordination:

Ø Assist in day-to-day client communications and quotation generation by liaising with the client and the team.

Ø End-to end event management from overseeing the setup to ensuring the smooth execution of the operations and overall guest’s experience

Ø Lead and manage the service staff and bartenders to ensure high levels of service and guest satisfaction.

Ø Maintain a strong presence during events to ensure the guest experience comply with the company standards.

Ø Develop and manage budgets for each event including negotiating with vendors to secure cost-effective and high-quality supplies and services,

Ø Assist to arrange for quotation and placing order for various items required for events / projects (e.g. packaging, props, tableware, glassware, linen, furniture, drinks, printings, etc.)

Ø Coordinate to manage inventory (drinks, napkins, tableware, glassware, linen, tools & serving trays, etc.)

Ø Handle administrative matters related to event organisation

Ø Assist on any ad-hoc tasts/projects

Requirements:

Proven experience as a F&B Events Management or in a similar role within the hospitality industry.

Strong organizational, time management and multitasking abilities.

Excellent communication and interpersonal skills.

Ability to work under pressure and meet tight deadlines.

A self-starter who can work independently and collaboratively with a positive mindset

In-depth knowledge of food and beverage trends and industry best practices.

If you are a passionate and detail-oriented professional with a flair for creating memorable F&B experiences, we invite you to apply for the position of Events Operations Manager with ATIPICO. Join our team and contribute to the success of our exciting and diverse events program.

The Role

This position will provide network support for Mapletree Group, which include being the point of contact for all requests, issue resolutions and support change requests after office hours, local and overseas.

Job Responsibilities

• Provide first, second level Network support
• Hands on experience in configuring, troubleshooting routing and switching protocol - BGP, OSPF, HSRP, layer 2 switch eg VLAN, STP
• Working knowledge of OSI layer 7 protocols including TCP/UDP, DNS, DHCP, http/https
• Experience in network segmentation through routing, VPN, SD-WAN
• Experience in Solarwinds, familiar with SIEM, syslog.
• Experience in managing Cisco call manager, teams voice.
• Primary responsibility for voice System, Cisco Enterprise Voice and Microsoft Team.
• Responsible for support of projects, change requests where needed and accommodate project/change timelines and work schedules. Comfortable to travel where needed.
• Able to manage, plan and resource projects effectively in a complex organisation
• Understanding of incident, problem, change management processes
• Ensuring network systems are compliance to security policies, follow the standard operating process (SOP).
• Good team player and able to work at all levels, confident, self-driven.
• Manage Operational admin activities like:

1. Supervising vendors and ensuring works are carried out appropriately, ensuring SLA are met, monthly reporting.
2. Procuring equipment and services
3. Maintaining billing records, contract expiry and coordinating payments
4. Updating documentation for system, equipment inventory, SOPs etc.
5. Monitoring systems
6. Preparing status reports for management

Job Requirements

• Diploma in Information Technology, and a Cisco Certified Network Professional (CCNP) or related disciplines.
• At least 5 years of relevant hands-on experiences.
• Familiarity in Cisco Switching and Router, Juniper and Palo Alto Firewall are essential.
• Responsible individual who are self-motivated, independent and good team player preferred.

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Job Description

In 2021 the Singapore Hybrid-Integrated Next-Generation micro-Electronics (SHINE) Center was established.

One of the projects in SHINE focusses on developing the technology and demonstrators for Radio Frequency (RF) and microwave applications on flexible substrates.

As part of this project, we have a position for a research engineer with proven knowledge and experience in researching, designing, and testing of microwave passive and active circuits and subsystems.

Note: a design portfolio showcasing RF designs must be attached to the resume.

Qualifications

• Possess a Bachelor or Master degree in Electrical Engineering
• Several years of experience in the simulation and design of microwave circuits and subsystems.
• Experience in the design of LNA, PA, mixer, control circuitry and antennas.
• Experience with tools such as ADS and HFSS.
• Experience with measurement of microwave circuits using VNAs.
• Able to work independently and in a team.
• Open to fixed-term contract.

About Us

Green Link Digital Bank (GLDB) is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

We are looking for an Information Technology Auditor to join the Internal Audit (IA) Team to help the Board of Directors and Senior management meet the strategic and operational objectives of GLDB.

About the Role

You will join GLDB’s Internal Audit Team to conduct independent assessments to ensure that GLDB’s risk and control processes are adequate and effective. This role will report to the Head of Internal Audit.

Responsibilities

Manage and Oversee the Execution of the Audit Plan/Issues and Initiatives

• Conduct risk-based projects, and review system implementation, applications, and other IT-related risk areas, including information gathering from stakeholders, execution and documentation of analysis, and communication of results.
• Define and implement testing layers of systems (e.g., application, database, operating system, data, infrastructure) for IT effectiveness.
• Develop IT audit procedures with innovation and creative thinking using data analytics and automation.
• Analyse and identify IT control points on services-oriented architectures, cloud services, virtualized environments, network technologies, system implementation and information security.
• Evaluate IT components of platforms and applications against internal standards, policies, procedures and IT standards and framework, including identifying symptoms and root cause.
• Proactively inform the Head of Internal Audit on the major risk events, IT incidents, and external audit on regulatory issues arising during the audit or through regular contact with stakeholders’ management.
• Ascertain major concerns and recommendations raised by internal stakeholders and external auditors and ensure satisfactory resolution.
• Propose, develop and/or drive initiatives that will help to develop an internal knowledge base.
• Support Head of Internal Audit in annual audit risk assessments and develop audit plans/strategies.

Support Staff and Self-Development

• Keep abreast of own professional development to enhance one’s skills and competence.
• Coach and guide junior staff on all audit engagements.

Must Haves

• Bank’s Applications (e.g., Core banking system, Trading system, Payment system and AML system).
• Cloud computing technology.
• Development operations (DevOps) environment, with strong understanding of the IT infrastructure components/processes that are essential in supporting continuous delivery, integration, automated testing, and performance monitoring associated with application development.

Requirements

• At least 8-10 years of working experience in Financial Institutions or Big 4.
• University Degree in Computer Science or a related discipline. CISA, CISM, CIA, CISSP or CPA certification preferred.
• Hands-on expert knowledge and successful track record in auditing IT General control processes such as: Change and Release Management, Incident and Problem Management, Program and Project management, Batch management, Performance and Capacity Monitoring of infrastructure systems, Security Patch Management, Vulnerability Assessment, and general Information/Cyber Security controls applicable to Banks and Financial Institutions
• Ability to navigate through ambiguity, manage and coordinate multiple project assignments and multiple teams simultaneously in a fast-paced, deadline-driven environment, accepting ownership and accountability of the process and deliver on commitments.
• Ability and willingness to take initiative to address problems and make continuous process improvements.
• General understanding of overall corporate banking business. Good understanding about Supply Chain Finance (trade), Cash products and corporate banking products adds advantages.
• Good written and spoken communication skills. Able to communicate in Mandarin/Chinese to liaise with China counterparts.
• Good project management and organisation skills.
• Ability to work with all levels of management and staff.
• Performance oriented.

Ranked top 50 most attractive employers in Singapore - The Straits Times Singapore's Best Employers 2023

The appointee will plan, implement and oversee Addition & Alteration (A&A) works in SP Campus.

Responsibilities

You will be responsible for the following:

• Manage the full spectrum of project cycle which covers planning, consultation with users and authorities, preparation of tenders and management of external contractors and consultants
• Oversee and manage contract administration matters such as processing payment claims, assessing the need for variation works, extension of time, loss and expense, final accounts and handling of contractual disputes.
• Lead and manage site staff, consultants and contractors including conducting of design reviews and value management sessions to ensure optimisation of engineering designs that promotes sustainability, construction productivity and safety.
• Coordinate matters related to statutory requirement of buildings on campus
• Manage changes to project scope and project schedule.
• Plan and facilitate project meetings and ensure all follow-up action is taken in a timely manner

Requirements

• Relevant qualifications in Building Science, Engineering (Civil, Mechanical or Electrical) or related discipline.
• Preferably 5 years of relevant project management experience in Civil & Structural works or Mechanical & Electrical works.
• Experience in Public Sector procurement procedures and regulatory requirements will be an advantage.
• Experience in leading project development teams, contract administration, resolving design & site issues.
• Self-motivated, resourceful, a good team player and able to multi-task.
• Certification as Licensed Electrical Worker, Fire Safety Manager and/or GMA/ GMAP/ GMAAP will be an advantage.

Modec Offshore Production Systems (Singapore) Pte Ltd is a leading provider of solutions to the Floating Offshore Oil & Gas market for more than 50 years and we are currently looking for a Senior Quantity Surveyor to join us.

Being part of Modec means being the protagonist of a challenging career and being in touch with the latest deep-water production systems, knowing that your career begins in Singapore, but your talent can take you anywhere in the world. If you want to be one of the greatest in the market, this is your opportunity!

This position will be based at multiple on-site locations and 5.5 working days.

Responsibilities:

This role is to perform assigned project/proposal Quantity Surveying activities with administrative of Post-Subcontracts (Block-K) documents (e.g. Major Fabrication Subcontracts Agreement and Related Exhibits A-J of RFP (Request For Proposal) Package) with accountability.
Safe keeping project close out final documents in J-Drive or Share points as repository data.

• Responsible for preparing and evaluating a job-specific Pricing Schedule Table of Exhibit E, Appendix 2 of RFP Package for budgeting and making a contract with subcontractor by collaborate with Engineering at proposal stage.
• Responsible for carrying out Remeasurement Quantity verifications against to IFC -Drawings submitted by Subcontractor at job execution stage.
• Change work management including miscellaneous works such as Reimbursable, custom clearance documents (Chinese/Portuguese, Others) verifications at Job execution stage.
• Preparing monthly cost forecast based on WCR/MTO versus contractual values and latest remeasurement quantities at job execution stage.
• Tracking SI / CR Log and estimating related cost impact and notify PMT, Project Snr. Lead QS at job execution stage.
• Negotiation with subcontractor and assist Project Snr. Lead QS and PMT (especially Project Control Manager and Project Contract Manager) for final account close out at Job execution stage.
• Material reconciliation against free issued quantities versus as built quantities at job execution stage

Requirements:

Educational Qualification:
Bachelor of Engineering Degree, Engineering Diploma, Marine Degree / Diploma Graduates or Oil & Gas related Bachelor of Engineering Degree / Diploma is essential.

Experiences:
Minimum 5-8 of Experiences in Oil & Gas especially FPSO shipbuilding or Shipyard experiences. (Ref.7.3)

Certification(s): (Preferred but not required)
Microsoft Office / AutoCAD / Primavera Training Certificates

Modec is committed in creating a diverse and inclusive workplace. We take affirmative action to ensure equal opportunity for all applicants regardless of race, religion, national origin, gender, gender identity, sexual orientation, disability, age, or other legally protected characteristics.

Roles & Responsibilities:

A Research fellow position is available in Dr. Anand Andiappan Laboratory at the Singapore Immunology Network (SIgN). The successful candidate will support the research work that focuses on studying allergenomics and immunogenicity in the context of human health. The candidate will work on primary cells from cohorts and cell culture systems towards understanding allergenicity and immune responses. Additional work involves cellular and stimulation assays with flow cytometry and FACS analysis along with imaging by microscopy, and associated data analysis with statistical tested.

Duties will include managing safety in the laboratory, creating Standard Operating Procedures (SOPs) and laboratory risk assessments, maintaining laboratory inventories, perform other laboratory administrative duties and operations such as ordering and tracking laboratory budget.

Requirements:

• PhD Degree in Allergy, Novel foods, Food/Nutrition Immunology, Life sciences, Biomedical sciences, Molecular Biology, Biotechnology or equivalent
• Preferably with experience in allergenomics , immunology, molecular allergy and clinical immunology
• Experience with human and mouse blood/tissue sample handling and in vitro cell culture and processing (e.g. isolation of specific immune cell populations, differentiation and activation assay)
• Experience with flow cytometry analysis for different immune cell populations and functional immune assays
• Highly motivated to work in research laboratory and able to perform tasks independently
• Precise, detailed-oriented and able to follow complex protocols
• Willing to learn new experimental procedures and troubleshoot assays
• Good team player with good interpersonal skills
• Good spoken and written communication skills

Please submit your application with a cover letter summarizing your research experience.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

StarFive is a leading provider of RISCV processors, platforms and solutions. StarFive products are widely used in smart home appliances, smart monitoring, industrial robots, traffic management, intelligent logistics, wearable devices, solid state storage, network communications and edge computing, etc.

We are intensively designing next generation high performance RISC-V CPU and RISC-V-based SoC chips. Talents who are passionate in research and development for future chips are welcomed to join us. Being part of this vibrant team, you can produce world class successful commercial chips supported by efficient software stacks.

Responsibilities：

• Maintain the automation of development environment (CI testing) and integrate the performance modelling and simulation platform and framework for micro-architecture explorations
• Investigate the current state of the art of CPUs and system on chip architecture including cache, on-chip interconnect, and memory hierarchy
• Implement simulation models for performance modelling of System-on-Chip components like caches, interconnect, and memory controllers
• Maintain, porting and cross-compile the benchmarks and master the sampling and trace-based simulation techniques
• Join the activity of micro-architectural exploration and data analysis for different benchmarks a
• Join the activity of architecture optimization for next generation of processor
• Develop automation strategies to maintain our core performance simulation models with strict quality gating and high-quality data reporting

Qualification：

• BS/MS with course work in Computer Architecture/Systems Engineering/Software Development
• Familiarity with software development and integration; usage of tools like JIRA, GIT, GERRIT, JENKINS
• Ability to setup benchmark suite (eg: Geekbench, SPEC), profile and gather performance results
• Having basic knowledge of modern processor architecture and cross-compilation environment (e.g. embedded system development)
• Able to program with assembly languages to enable benchmark porting and debugging
• Competent in C/C++ and scripting languages (Perl/Python)
• Skillful on working in Linux server environment
• Fresh Graduates are welcome
• Strong interpersonal skills, written and oral; good team player
• Curiosity to learn and execute at fast pace; communicate effectively with mentors and other team members

Roles & Responsibilities

• Provide timely and accurate Financial and Management Reporting support to line managers

• Provide accurate cash flow and coordinate the intercompanies payments and receipts within the same business

• Support Head of Finance in the implementation of internal controls.

• Manage yearly audit, tax and budget exercise

• Oversee the Reporting Team and supervise GL/FA team daily

• Align work processes for entities within the team to achieve consistency and efficiency.

Requirements

• Candidate must possess at least Bachelor’s Degree in Accounting, ACCA level 3 or equivalent with CPA certification

• At least 5 years’ of working experience in handling full set accounts and management reporting, preferably a minimum of 2 years in managerial position

• Familiar with Financial reporting standards (FRS), accounting principles, Singapore tax knowledge, BPC

• Strong in SAP Financials modules & excel preferred

• Possesses strong leadership and people management skills, commercial acumen and resilience, analytical mind and communication skills

• Able to work alone and in teams under stress and meet challenging deadlines