Our client is specialized in the production and distribution of disposable medical devices.

• Handle the automation projects including equipment upgrade, and assembly process productivity initiatives.
• Lead the automation initiatives to ensure the machine design, cycle time, project lead time and cost meet the requirements.
• Work closely with cross functional teams to achieve equipment effectiveness and improve process capability through process enhancement and validation.
• Contribute to continuous improvement projects to minimize operational disruption and achieve productivity savings.

Requirements:

• Degree in Mechanical/Electrical Engineering or equivalent
• At least 5 years of experience in automation and assembly processes from Medical Device/Pharmaceutical industry.
• Strong knowledge on automation machine design and PLC programming.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Perform pre- and post-sales technical support to customers.
• Provide support to the sales staff in technical presentations.
• Evaluate and establish a vision system performance specification.

Requirements:

• Diploma in any Engineering field
• At least 2 years of experience in field servicing and semiconductor industry.
• Able to troubleshoot electronics hardware system, PC hardware, OS and networking.
• Good understanding in Die Sorter or Wafer Sorter

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Description:

• Design, develop, and debug embedded software solutions using C/C++.
• Collaborate with hardware engineers to integrate software with hardware components.
• Implement and optimize software for embedded systems on Linux OS.
• Write efficient and maintainable code for embedded platforms.
• Conduct thorough testing and debugging of embedded software solutions.
• Document software designs, processes, and procedures.

Requirements:

• Proficiency in C/C++ programming languages (average to strong).
• Experience in developing embedded software using C/C++ (in school or work).
• Hands-on experience with developing C/C++ on Linux OS.
• Experience in developing embedded software on ARM processors is preferred.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

On behalf of the hiring company that is in the Built Environment OEM space, we are looking for suitable personnel to join them as Software Development Executives (electrical background):

Responsibilities :

• Software Design: Develop software for various vertical transportation systems, including Housing & Development Board (HDB), private, and modernisation systems. Refer to approved layout drawings, production requests, machine applications, client specifications, and electrical straight diagram drawings.
• Electrical Diagram Review: Interpret and verify electrical straight diagram drawings from the Hardware Design Department. Identify and report any inconsistencies or errors.
• Documentation and Communication: Issue notices, instructions, software documents, and contract-related materials as needed.
• Factory Support: Assist factory testing staff with job software design and technical troubleshooting during system testing.
• Design Optimisation: Ensure that software designs are cost-effective and fully comply with client specifications and project timelines.
• Error Investigation: Participate in investigating software errors and develop corrective and preventive measures. Collaborate with the Electrical Department to address any discrepancies between software and hardware designs and resolve issues before shipping the system to the site.
• Field Support: Assist system installation staff during on-site installations. Troubleshoot problems, and modify software as necessary to meet client requirements.

Requirements

• A diploma (at least 3 years) or degree in Electrical Engineering
• Familiar with programming languages such as C, C++, etc
• Familiar with schematic or single-line designs/drawings
• Able to work independently and as a team

Remuneration will be pegged to qualification and experience

Location: East (near to MRT station)

EA Licence : 22C0971 | EA Registration : R21101298

Responsibilities:

·Plan, execute, monitor and assist in the installation and ongoing support and maintenance of all hardware, software and networks in project delivery

·Conduct root cause analysis & implement pro-active measures

·Responsible for supporting operational systems satisfying contractual Service Level Agreement

·Perform and manage routine preventive maintenance and operational activities promptly and effectively

·Perform troubleshooting and fault rectification

·Provide up-to-date project documentation and reports

·Diagnose and rectify technical issues

·Perform standby duties if required

Requirements:

·Experience in Windows server OS, Unix/Linux OS & virtualization environment (VMware, HyperV etc.)

·Strong troubleshooting skills and analytical mind with problem-solving aptitude

· Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment

·Pro-active, dynamic and with good analytical/conceptual thinking

·Able to work independently as well as in a team and good interpersonal skills

·Good Working knowledge with VPN, firewall appliances would be an advantage

·Good working knowledge with routers, switches would be an advantage

·Good working knowledge in hardware like servers, storage area networks (SAN), network-attached storage (NAS) devices

•Experience in hardening of OS, system and network equipment

•Experience in Patch Management

•Good Knowledge of IT Infra services like Active Directory, DHCP, DNS, Exchange/Mail Service, Database, Web or App Server etc.

·Entry level candidates are welcome. Candidates with more/ complexity of experience will be considered for a senior role.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

We are looking for a skilled and experienced QA/QC Engineer with a strong background in Mechanical Engineering to join our team. The ideal candidate will hold certifications in AWS (American Welding Society) and NDT (Non-Destructive Testing) and will be responsible for ensuring quality assurance and control across various mechanical projects, particularly in industrial settings such as process piping, welding, and fabrication.

Key Responsibilities:

• Develop, implement, and maintain QA/QC procedures to ensure compliance with industry standards and project specifications.
• Conduct inspections, audits, and tests related to welding, piping, and mechanical systems to ensure the highest quality.
• Review and approve quality control documentation, including material certificates, test records, and non-conformance reports.
• Perform Non-Destructive Testing (NDT) and ensure that all materials and welds meet required safety and quality standards.
• Work closely with the project team, contractors, and suppliers to resolve any quality issues during project execution.
• Ensure compliance with AWS standards and other relevant engineering codes and practices.
• Monitor and report on project quality metrics, providing recommendations for improvements when necessary.
• Prepare detailed inspection and test plans (ITPs), as well as final quality reports for project handover.
• Ensure all health, safety, and environmental standards are met during quality inspections.

Requirements:

• Bachelor’s degree in Mechanical Engineering or a related field.
• AWS (American Welding Society) and NDT (Non-Destructive Testing) certifications are mandatory.
• Proven experience in QA/QC roles, particularly in industrial, mechanical, or process piping environments.
• Strong knowledge of quality assurance methodologies, inspection techniques, and standards.
• Familiarity with Singapore’s safety regulations and industry standards.
• Excellent problem-solving skills with an eye for detail.
• Strong communication skills to interact with project teams, clients, and contractors.
• Proficiency in QA/QC software and reporting tools.

Preferred Qualifications:

• Experience in process piping plants or similar industrial projects.
• Professional Engineer (PE) certification is an added advantage.

Reporting Structure:

• Supervisor(s): Critical Facility Manager

Job Responsibilities:

1. Perform duty and/or shift duty roster to manage Data Centre operations, maintenance, troubleshooting, project rollout, and facilities related matters. This includes maintain and repair of infrastructure systems and critical facilities equipment.
2. Perform Data Centre monitoring and maintenance on infrastructure systems, critical facilities, and associated equipment. This includes raised floor environment, mechanical, electrical, emergency generators, fire/life safety systems and associated equipment.
3. Perform preventive and corrective support to scheduled or unscheduled maintenance on Data Centre infrastructure systems, critical facilities equipment and/or services.
4. Ensure all subcontractors deliver a quality and competent service and all contractual obligations are met.
5. Perform Data Centre and critical facilities work on environmental and management programs.
6. Perform equipment functionality test and data analysis.
7. Perform assets management duty. This includes maintaining of inventory, change and control programs, and purchase of parts and supplies.
8. Promptly respond and attend to incident and/or emergency situations. This includes fire, evacuation, equipment failure, etc.
9. Be the point of contact during significant events/incidents or multi-discipline technical escalations occurring within the specified sites.
10. Provide support, coordinate, and supervise Data Centre maintenance efforts. This includes coordination with internal and/or external parties, contractors, suppliers, and clients.
11. Provide standby support upon activation for shift duty stand-in and/or other coverage.
12. Conduct routine, sanity check and on-going assessment of Data Centre infrastructure systems and critical facilities operations.
13. Comprehend, analyse, interpret documentation. This include maintaining and updating of as-built drawings and schematic diagram.
14. Promote and maintaining the core Values of Engie.
15. Ensure professional image of Engie presented to clients and visitors at all times.
16. Comply and adhere to all regulated protocol and/or Company’s rules and regulation.
17. Perform other duties at time assigned by line managers.

Job Requirements:

1. Degree/Diploma in Electrical, Mechanical, or Equivalent experience.
2. Must be able to demonstrate a career showing continuous personal development with at least two years’ experience in Datacentre or 24/7 critical environment management.
3. Must be a certified Data Centre Professional or equivalent experience.
4. Good experience in 24/7 Datacentre and/or maintaining critical environments.
5. Able to perform standby or coverage of shift duty or on weekends/public holidays.
6. Preferably understand all the associated safety code related requirements relative to providing the service.
7. Experience with Health & Safety, Risk Assessments and Control Measures.
8. Detailed understanding and experience of the electrical and mechanical systems used in a Datacentre and commercial environment, including Feeders, Transformers, Generators, Fuel Systems, Switchgear, UPS systems, Battery banks, ATS/STS units, PDU/PMM units, ACMV, chilled water systems, Fire Alarm systems, and Fire Suppression systems (pre-action sprinklers).
9. Experience in operations management including team management and work scheduling.
10. Experience in managing escalation and emergency issues.
11. Experience in vendor management, ability to manage and progress monitoring to ensure objectives are achieve for outsourced support and projects.

Personal Attributes:

• Meticulous and have an eye for details with positive working attitude
• Organized and details-oriented, with a strong focus on accuracy
• Able to work under pressure and tight deadline

Other Information:

• Job Type: Full Time, Permanent
• Work week: 5 days
• Work location : Various location

About EPAM

EPAM is a leading global provider of digital platform engineering and development services. EPAM has been expanding in Singapore since 2013 and delivering the best solutions to our customers. As a recognized leader, EPAM Singapore achieved Great Place to Work® Certification in 2023 and is committed to providing our team with inspiring careers.

You will have the opportunity to work with fellow talented technologists and accelerate your career by participating in our numerous upskilling, training, and certification programs. That is why EPAM Singapore was awarded Gold for Best In-House Certification Programmes in the Employee Experience Awards 2023 and Silver in the SkillsFuture Employers Awards 2022 for our efforts in championing employees' skills development and building a lifelong learning culture at the workplace. You can also look forward to developing holistically with the multiracial festivals and various wellness and cultural activities organized by our passionate colleagues here.

Why EPAM?

• By choosing EPAM, you're getting a job at one of the most loved workplaces according to Newsweek 2022 & 2023.
• Employee ideas are the main driver of our business. We have a very supportive environment where your voice matters.
• You will be challenged while working side-by-side with the best talent globally. We work with top-notch technologies, constantly seeking new industry trends and best practices.
• We offer a transparent career path and an individual roadmap to engineer your future & accelerate your journey.
• At EPAM, you can find vast opportunities for self-development: online courses and libraries, mentoring programs, partial grants of certification, and experience exchange with colleagues around the world. You will learn, contribute, and grow with us.

What You’ll Do

• Collaborate with stakeholders and developers to ensure high-quality software builds.
• Review and improve development processes through testing and analysis.
• Develop and maintain comprehensive test plans and cases.
• Establish and manage automated testing frameworks.
• Conduct various types of testing (integration, functional, performance, security).
• Validate completed stories against acceptance criteria.
• Demonstrate tested features and prepare for production releases.

What Will Make You Shine

• Bachelor's degree in IT, CS, Technical Communication, or related field.
• 5+ years of experience as a Software Tester.
• Strong experience in automated testing methodologies (unit, integration, TDD).
• Proven track record as a QA Tester.
• Excellent test plan and case writing skills.
• Proficiency in Python scripting and automated testing tools.
• Familiarity with Agile frameworks and regression testing.
• Strong problem-solving and analytical skills.
• Excellent communication and documentation skills.
• Experience with performance or security testing (preferred).
• Knowledge of databases and SQL.
• Relevant certifications (e.g., CSTE, CSQA) are a plus.
• Strong SQL, data modeling, and analysis skills.

How We Hire

Here, we summarize the typical journey to finding a job within EPAM:

1- Apply and tell us about yourself

2- Go through some standard interviews:

• · General interview with a recruiter
• · Technical interview with our technology experts
• · Manager interview or Offer interview with a hiring manager

3- Get ready to join the team

Not sure if you meet all the requirements? No problem. Let’s talk anyway and find out more.

It takes 1 min of application to start the journey with us. Apply now!

We are currently looking to hire a “Ops Team Lead”. This is an exciting opportunity to expand your skill set, achieve job satisfaction and work-life balance. More details as below.

Type of Employment: 1 year contract under Avensys payroll

Job Location: Changi Business Park, Singapore

Responsibilities:

• The candidates will have to be responsible for the team, ensuring day to day operations run smoothly, critical projects/apps are prioritised and escalations handled appropriately. The lead should also proactively promote service excellence by identifying strategies that can be adapted and scaled to drive operational efficiency across the team.
• Minimum qualification: Tertiary Education in a technology discipline, AWS Solution Architect Associate level certification, 3 year working experience in a similar setting would be preferred.
• Language: English
• Knowledge
  • Mandatory: Reasonable amount of AWS knowledge/experience
  • Mandatory: Some troubleshooting flair.
  • Bonus: Relevant knowledge/experience on Jenkins/Bitbucket/Python is a bonus.
  • These security tickets are triggered from various sources, such as AWSConfig , Cloudwatch and CSPM tools.

Qualification:

• Bachelor’s degree in Computer Science, Information Systems, or Engineering (or similar)

WHAT’S ON OFFER

You will be remunerated with an excellent base salary and entitled to attractive company benefits. Additionally, you will get the opportunity to enjoy a fun and collaborative work environment, alongside a strong career progression

To submit your application, please apply online or email your UPDATED CV in Microsoft Word format to [email protected]. Your interest will be treated with strict confidentiality.

CONSULTANT DETAILS

Consultant Name: Vasuki Kumar

Avensys Consulting Pte Ltd

EA License 12C5759

Privacy Statement: Data collected will be used for recruitment purposes only. Personal data provided will be used strictly in accordance with the relevant data protection law and Avensys' personal information and privacy policy.

Our client is a specialized provider in Asia that focuses on delivering unique solutions for welding gases and safety, aiming to enhance operational efficiency and safety practices across various industries.

• Oversee the efficient operation and maintenance of gas supply facilities and associated equipment.
• Develop project designs, estimate costs, and present the results.
• Deliver technical training to staff while assessing materials, subcontractors, and suppliers.
• Ensure adherence to government regulations and respond effectively to emergencies.

Requirements:

• Degree in Mechanical/Electrical/Electronic/Mechatronic Engineering or equivalent.
• At least 2 years of experience with Gas/Medical Gas Systems.
• Proficient in AutoCAD

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

• Provide presales support by solving technical business solutions for the client.
• Responsible for product demonstration, proposal writing, creating compliance table, training and product enablement.
• Develop working proficiency and obtain certifications on assigned products and technologies.
• Conduct hands-on POC independently and present vendor’s solution to partners and end-users.

Requirements:

• Diploma in Computer Studies or equivalent
• At least 2 years of presales experience in IT network and Cybersecurity domain.
• Good knowledge of security and networking infrastructure environment.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Benefits:

• Competitive Salary: Earn up to $6,000 basic plus variable bonus.
• Diverse Work Environment: Work on various projects across Singapore, enhancing your experience and skill set.
• Career Development: Opportunities for professional growth in a dynamic engineering field.
• Collaborative Culture: Join a supportive team environment with clear communication and collaboration among stakeholders.
• Work-Life Balance: Standard working hours with Saturday mornings for a well-rounded schedule.

Job Description:

We are looking for a motivated M&E Project Engineer Cum Drafter to manage mechanical and electrical (M&E) aspects of construction projects. In this role, you will be responsible for planning, coordinating, and executing project tasks while ensuring compliance with engineering principles and safety regulations. This position is ideal for someone who enjoys problem-solving and collaborating with diverse teams.

Roles & Responsibilities:

• Manage and oversee all M&E works on construction sites, ensuring adherence to specifications, budgets, and timelines.
• Prepare and review M&E designs and drawings, ensuring compliance with codes and project requirements.
• Coordinate with contractors and consultants to resolve technical issues related to M&E installations.
• Conduct site inspections to monitor work progress and quality, addressing any issues that arise.
• Prepare and submit regular project status reports, including updates on progress, risks, and mitigation strategies.
• Develop and submit shop drawings, Revit BIM for coordination, as-built drawings, and construction drawings.
• Manage project documentation, including technical drawings, specifications, and change orders.
• Collaborate with the procurement team to source and secure M&E materials and equipment.
• Assist in the commissioning and handover of completed M&E systems to clients.

Requirements:

• Minimum Degree in Engineering or related field.
• 1-2 years of experience in similar industries within Singapore.
• Proficiency in AutoCAD; ability to develop in Revit is a plus.
• Strong verbal and written communication skills for effective stakeholder engagement.
• Excellent analytical and problem-solving abilities to tackle technical challenges on-site.
• Familiarity with Workplace Safety and Health (WSH) regulations.
• Ability to manage multiple projects and work under pressure.

Additional Information:

• Salary: Up to $6,000 basic + variable bonus.
• Working Hours: Monday to Friday – 8:00 am to 5:00 pm, Saturday – 8:00 am to 12:00 pm.
• Office Locations: Yishun / King George's Ave

Responsibilities:

• Plan, execute, monitor and control the various technical aspect of the Project.
• Conduct root cause analysis & implement pro-active measures
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities promptly and effectively
• Perform troubleshooting and fault rectification
• Provide project documentation and reports
• Diagnose and rectify technical issues

Requirements:

• Experience in Windows server OS, Unix/Linux OS & VM environment
• Strong troubleshooting skills and analytical mind with problem-solving aptitude
• Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment
• Pro-active, dynamic and with good analytical/conceptual thinking
• Able to work independently as well as in a team and good interpersonal skills
• Good Working knowledge with VPN, firewall appliances would be an advantage
• Good working knowledge with Cisco routers/switches would be an advantage
• Entry level candidates are welcome. Candidates with more/ complexity of experience will be considered for a senior role.

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Full time Level 2 Network engineer

• Project technical lead for ICT Projects
• Support in daily operations on incident management, problem(s) / issue(s) remediation and service(s) restoration. Fulfilling of network (routing & switching, DNS, static IP, etc) service request(s) following the Change Management procedure.
• Create and maintain documentations of network configuration, network diagram, mapping, processes, and service records.
• Manage, track and assessment all of principal advisories on patches on vulnerability and firmware upgrades Planning and applying of devices security patches and firmware upgrades.
• Any other tasks assigned by the Institute.

Full time Level 2 Network engineer required qualification and experience:

• Relevant Diploma or Bachelor’s Degree in Computer Engineering (or equivalent).
• At least 3 years of strong experience with in-depth hands-on experience on network devices such as Cisco Nexus switches, Catalyst switches, ASR Routers, Infoblox, Networking Monitoring Tools, Cisco DNAC, etc. Candidate must have minimum CCNP certification (routing & switching).
• Strong communications and written skills in English.
• Excellent problem-solving skills in a multi-tasking, fast-paced and complex work environment.
• Good communication skill, positive attitude, team player, resourceful and resolve problems independently.
• At least 3 years supporting a campus network infrastructure.

Position Overview:

HTM is seeking a competent and proactive Technical Sales Engineer with good Technical Sales experiences in Hydraulic, Pneumatic, and Power Tool Technologies. He/she will play a pivotal role in expanding the customer base and driving revenue growth together with the Management Team.

Industry Type: MANUFACTURING.

Company Address: PAYA LEBAR SQUARE, 60 PAYA LEBAR ROAD, #07-54, S09051.

Working Hours: 5 days (Mon-Fri, 8:00am - 5:30pm).

Compensation: Basic from $1,800; Sales Comm; Phone Allowance; Transport Allowance.

Employment Duration: Permanent.

Others: Possess Class 3 Driving License.

Key Responsibilities:

· Identify and research potential clients and industries that align with company’s Sales of hydraulic, pneumatic, and power tool technologies.

· Generate new leads through market research, industry events, networking, and other channels.

· Develop a deep understanding of client needs and pain points to tailor sales approaches effectively.

· Provide technical expertise and consultation to clients, offering solutions and value propositions that address their specific requirements.

· Develop and maintain strong relationships with key decision-makers within client organizations.

· Create and deliver compelling sales proposals and quotations, highlighting the benefits of company’s products and services.

· Prepare quotations, negotiate contracts and pricing while ensuring win-win outcomes for both parties.

· Stay updated on industry trends and advancements in hydraulic, pneumatic, and power tool technologies, market dynamics, and competitor activities.

· Analyse market data to identify opportunities for growth and adapt sales strategies accordingly.

· Maintain accurate records of sales activities, customer interactions, and opportunities with MS Office.

· Provide regular sales forecasts and reports to the management team.

· Act as a liaison between clients and the company to ensure smooth project execution.

· Address customer inquiries, concerns, and issues promptly and effectively.

· Any other task as assigned by immediate supervisor/management.

Qualifications:

· Diploma or higher in Engineering, Mechanical Engineering, or a related field preferred.

· 5 years of relevant experience in technical sales in any industry.

· Good team player, good attitude, honest, discipline, positive thinking, resourceful, and a good problem solver.

· Strong technical acumen and the ability to understand and communicate hydraulic, pneumatic, and power tool technologies.

· Good communication, negotiation, and presentation skills. Able to communicate in English and Mandarin.

· Self-motivated with track records of meeting and exceeding sales targets.

· Ability to work independently as well as collaboratively within a team.

· Proficiency in MS Office.

· Willingness to travel as needed to meet with clients and attend industry events.

How to Apply:

If you are passionate with the MRO industry and want to be a team member of an expanding business, we invite you to join HTM and work with us to take the company to a new height. Please submit your application to the email address: sales@htm.com.sg

About the job

Venture, a public listed company in SGX, is a leading global provider of technology services, products and solutions with established capabilities spanning marketing research, design, research and development. Over the years, Venture has built know-how and intellectual property with expertise in several technology domains. These include life science & genomics, molecular diagnostics, medical devices and equipment, healthcare and wellness technology, lifestyle consumer technology, health improvement products, instrumentation, test and measurement technology, networking and communications, fintech, as well as computing, printing and imaging technology.

Headquartered in Singapore, the Group comprises over 30 companies with global clusters in Southeast Asia, Northeast Asia, America and Europe, and employs over 12,000 people globally.

At Venture, our people are our most valuable asset. We are committed to unifying culture, encouraging innovation, and harnessing the collective strengths and synergies of our human capital to deliver compelling differentiation, advancing Venture’s position as a leading global provider of technology solutions, products and services.

We’re looking to add a Senior Engineer, Mechanical (R&D) in Singapore. The position is based in our HQ at Ang Mo Kio.

As a Senior Engineer, Mechanical (R&D), you will:

• Engage in both conceptual and detailed design of mechanical parts and modules, electro-mechanical subsystems, transmission systems and fluidics / pneumatics mechanisms.
• Perform technical analysis (e.g. structural, thermal management, fluidics, FMEA and Design for Manufacturing) to validate and optimise design to ensure designs meet specifications, project timeline and cost objectives.
• Have opportunities to participate in technical discussions and present design solutions to clients.
• Coordinate the fabrication, assembly, and validation of prototypes to ensure they meet specifications.
• Author specifications, requirements, and validation plans for assigned design modules.
• Collaborate with manufacturing teams and part suppliers throughout the product lifecycle.
• Support reasonable accommodation of additional duties as assigned by the company.

What skills and experiences are we looking for?

• Bachelor's or Master's degree in Mechanical Engineering.
• Minimum of 5 years of relevant experience.
• Proficient in CAD tools such as SolidWorks.
• Good knowledge and experience in product design, designing of robust electro-mechanical systems.
• Experience in designing for plastic molding, sheetmetal stamping, machining and extrusion.
• Familiarity with Geometric Dimensioning and Tolerancing (GD&T) and Tolerance Stack-up Analysis.
• Proficiency in simulation tools, mechanical FEA and programming skills (e.g., Python) would be an added advantage
• Experience in lab automation equipment, such as motion control, fluidic pumps, and valves or packaging design is a plus.
• Knowledge of medical product compliance standards such as ISO13485 would be advantageous.
• Excellent problem solving and analytical skills
• Self-driven team player who is able to work in a fast-paced environment.
• Availability for occasional overseas travel.

If you embody the spirit of excellence, passion for discovery, innovation and enterprise, and the desire to make a difference in the world of technology and electronics, come join the Venture team!

Be Part of the Global Venture Family.

Disclaimer:

By submitting your application to Venture Corporation Limited and its group of companies, you acknowledge and agree that any personal data you provide will be processed for the purpose of evaluating your application for employment.

If you are not selected for this position, we may retain your personal data to consider you for future employment opportunities unless you inform us otherwise. Should you wish to withdraw your consent or request access to or correction of your personal data, please contact our Personal Data Protection officer by email: [email protected]

Job Description:

• To assist the QA engineer for developing and constantly improve on the Quality Management (QM) System and ensure compliance to quality lntemational Standards.
• To assist in managing and ensuring that system and controls of the QM System are working efficiently and effectively.
• Inspections of projects/components to review and maintain quality standards and requirements for the Company.
• Responsible for manufacturing Quality Assurance as well as Incoming, In-Process and Outgoing Quality operations.
• To assist in preparing inspection reports as per customers' requirements.
• To assist in managing day to day internal quality issues and non-conformity disposition.
• To assist in reviewing, coordinate and follow up in corrective and preventive actions.
• Prepare be MR for ISO900I and lSOl400l.
• Responsible for developing and overseeing the implementation of the Quality Control Plan.
• Responsible for the controlled documents such as Quality Management System Manual, customer drawing, standard, specification etc.
• Monitoring of all works performed by suppliers / cuntractors to ensure that quality works are produced.
• Maintain measuring equipment, gauges and welding machines are calibrated and record.
• Review of various document such as WPS, SAN, PQR, WQT, PRC and PCP prior to production welding.
• Perform inspection before welding such as part preparation, welding machine setting; preheat temperature and other relevant parameters in line with the applicable approved WPS.
• lnspect after welding to ensure parts welded as per drawing / customer's requirement and no welding defect.
• Perform NDT inspection on welded parts accordance to drawing specification.

Requirement:

• Able to read technical drawings
• 5 years working experience in same industry
• 5 and half working day per week
• Willing to work at Tuas South area

Responsibilities:

• Perform electrical and Instrumentation troubleshooting.
• Implement and execute preventive and breakdown maintenance work for electrical and instrumentation related tasks with focus on safety.
• Responding to breakdowns, diagnosing faults, record and report.
• Implement reliability programs and develop maintenance procedures for instrumentation & electrical equipment to facilitate consistent execution of maintenance tasks.
• Investigate instrument & electrical equipment failures or malfunctions in order to identify root causes of problems as well as recommend and implement solutions.
• Identify and maintain an optimum level of electrical spares and drives to reduce plant downtime, take drive parameters back up and need to maintain.
• Ensure systematic documentation of Maintenance Procedures and Risk Assessments, SLD, E&I related and maintenance records for troubleshooting purpose.
• Update and control of Electrical specification, procedure and drawings.

Requirements:

• Degree in Electrical Engineering or Instrumentation / Maintenance Engineering.
• Min 3 years of working experience in electrical engineering in pharmaceutical industry.
• Candidates from E&I project engineer (with brown field experience) or E&I technician (operating plant) experience will be an added advantage.

Duration : 12 months. Option to extend/convert subject to performance review.

Job descriptions :

1. Work on SoC/Subsystem define and integration.
2. Work on IP developments, Perform Verilog/System Verilog RTL design to meet product specifications and requirements；
3. Work with SW Engineer and HW Engineer on all aspect of SoC to optimise Silicon and board level design;
4. Work on SoC system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;
5. Work on SoC floorplan with APR and HW Team; SoC timing constraints and review support; SoC DFT support; SoC verification plan and SoC verification support
6. Post silicon Debug and support.

Job requirements:

· Bachelor's or Master's degree in electronic engineering with more than 5 years ASIC design experience.

· Experience with ASIC design flow

· Experience in RTL coding, RTL and gate-level simulation, logic synthesis, static timing analysis, timing closure and verification

· Experience in video processing and video analytics is a plus

· Experience in USB/SDMMC/DDR IP is a plus.

· Experience in Functional Safety, automotive certification is a plus.

· Passionate and strong in general programming is a plus

· Good understanding of DFT

· Familiar with UNIX/ Linux environment and scriptiing

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

What we offer:

• Competitive salary package
• Medical insurance (including dental)
• Annual Health Screening
• Company trip & teambuilding activities

Responsibilities:

• The candidates will have to be responsible for the team, ensuring day to day operations run smoothly, critical projects/apps are prioritised and escalations handled appropriately. The lead should also proactively promote service excellence by identifying strategies that can be adapted and scaled to drive operational efficiency across the team.

Requirements:

• Minimum qualification: Tertiary Education in a technology discipline, AWS Solution Architect Associate level certification, 3 years working experience in a similar setting would be preferred.
• Bachelor’s degree in Computer Science, Information Systems, or Engineering (or similar)
  • Knowledge in reasonable amount of AWS knowledge/experience
  • Knowledge in some troubleshooting flair.
  • Relevant knowledge/experience on Jenkins/Bitbucket/Python is a bonus.
  • These security tickets are triggered from various sources, such as AWSConfig , Cloudwatch and CSPM tools.

Location: Changi Business Park, Singapore

Info can be shared ATM:-

• Basic Up $3000 (No Exp Req) + VB
• 5.25 Days, Office Hour (Alternate Half Saturday)
• Macpherson (Central)

Your Responsibilities: -

• Generate detailed mechanical drawings based on project requirements and specifications.
• Ensure that all drawings meet the correct specifications, standards, and regulatory requirements.
• Coordinate with customers to understand their specific needs and gather feedback on the initial drawings.
• Follow up with the assembly team to ensure that they have the necessary drawings and information for the project.

You will need: -

• No exp required, training will be provided

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

The Role:

• Lead Engineer role for mechanical scope.

• Perform all engineering design assignment (Core: Pumps, Compressors, Blowers, Turbines, Machinery, Package Equipment. Option: Vessels, HVAC).

• Checker role for department rotating/package deliverables.

• Prepare specifications, data sheet, and inquiry documents.

• Perform all discipline engineering assignment and design work.

• Perform technical bid evaluation.

• Mechanical handling and movement study.

• Coordinate with disciplines for layout.

• Review of vendor documentation and vendor management.

• Provide technical requirements and assessment for inspection and QC-related matters.

• Participate in site surveys, HAZOPs, and various workshops.

• Participate in FATs, shop inspections and provide technical support during construction, pre-commissioning stage.

• Handle interface matters and coordinate with relevant parties.

• Must be ready to work at construction site and be ready for working overseas upon request.

• Other work-related requests from Department Manager/Supervisor.

The Requirements:

• Degree in Mechanical Engineering, with 12 to 15 years experience in the industry.

• Has onsite experience for field engineering, commissioning and troubleshooting.

• Familiar with Shell DEPs, Exxon GPs, Chevron CES and GMPs design is an added advantage.

• Familiar with and have experience with pumps, compressors blowers, turbines and other industrial package.

• Possess ability to interpret client requirement, identify deviations and co-ordinate for resolutions.

• Demonstrates the ability to verify own product for error free output and draft technical resolutions for issues, communicate interface matters timely to various discipline.

• Experience to lead an amalgamated team of engineers working in different locations.

• Competent in English language and proficient in MS Office programs.

• Competent in planning and coordination with relevant parties both internal and external.

To Apply:

Please send your latest CV in word file to [email protected]

Kindly indicate your availability, current and expected remuneration package.

We regret that only shortlisted candidates will be notified.

Quinnox Solutions Pte Ltd (License Number: 06C3126)

Registered EA Personnel (Reg. No.:R1111100)

We are seeking talented R&D Engineer to assist with the design and customization of our new/existing Vertical milling machine portfolio. In this role, you will be working closely with the R&D team to create functional design concepts, validate designs, and follow through from design stage to production.

Responsibilities:

• Developing new products and introducing innovative designs for our existing product series.
• Crafting customized machines to meet the unique needs of our diverse customers.
• Nurturing collaboration across various company departments, including Sales, Marketing, Product Management, Production, Supply Chain, Customer Support, etc.
• Mastering the art of designing rigid, high-accuracy structural parts, as well as lightweight components for rapid, high-acceleration applications, working hand-in-hand with our Simulation and Test Engineers.
• Pioneering the development of mechatronic units, integrating Pneumatic, Hydraulic, Servo-electric, and Sensor components to create seamless machine systems.
• Engaging in Concept Design, Structural Simulation, Detailing, Prototyping, Testing, Production, Customer Support, and Monitoring machine performance at our clients' sites.
• Leveraging our dedicated R&D Lab for innovative prototyping.
• Enjoying mentorship from seasoned senior engineers, guiding you on your career path to success.
• Embracing a global perspective by collaborating with an extensive network of Makino R&Ds, Sales Regions, and Key Suppliers.

Requirements:

• Bachelor's Degree in Mechanical Engineering from a reputable university.
• Passion for Product design.
• Excellent Problem-solving skills and able to work hands-on.
• Effective team player who is creative, meticulous, independent and responsible.
• Familiar in 3D modelling software such as SolidWorks and Simulation tools will be an advantage.

Main Responsibilities

• Research & Development for machine tool products and technologies (CNC Milling Machines and it’s Automation)
• Development of Customized Machines for our customers.
• Collaboration with main company departments from Sales, Marketing, Product-Management, Production, Supply-Chain, Customer-Support and Controlling.
• Design of rigid and high-accuracy structural parts as well as lightweight-parts for fast, high-acceleration-applications in teamwork with Simulation- and Test-Engineers.
• Design of mechatronic-units with pneumatic, hydraulic, servo-electric and sensor components.
• Involvement in Concept-Design, Structural-Simulation, Detailing, Prototyping, Testing, Production, Customer-Support and Surveillance of machine-performance at our customers.
• Strong guidance by experienced senior-engineers along the career-path.
• Collaboration with extensive global network of Makino R&Ds, Sales-Regions and Key-Suppliers.

Job Requirements:

• Degree in Mechanical Engineering from reputable University
• Strong interest in product-design for the production-environment as key-enabler for many innovative products.
• Creativity for innovative solutions as well as strong analytical skills
• Minimum of 2 years of experience in mechanical design
• Good time management, pro-active, self-motivated and high sense of responsibility.

Job Responsibilities:

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Job Requirements:

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Healthcare/Data Centre/LTA experience preferred
• Strong design experience in Fire Safety
• Minimum 6 years of relevant design experience
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.