JOB SUMMARY

Carry out Quality Inspections, Prepare Quality Reports, Calibration of Monitoring and Measuring Equipment and ensuring Compliance to QHSE Policies and Procedures at all times.

RESPONSIBILITIES & DUTIES

• Ensure incoming and in-process inspections are carried out timely and quality inspection reports are filled up accordingly.
• Ensure timely communication about the defects detected during inspections to the Quality Engineer, QHSE Manager/ MR, Production Supervisor and Production Manager.
• Review quality inspection reports from external providers and perform verification of the results.
• Updating Quality Engineer and QHSE Manager/ MR on the inspection status and update in Navision.
• Follow safe work practices and procedures.
• Ensure company and QHSE policies and procedures are adhered to at all times.
• Ensure that operations within his area of responsibilities are in accordance with the QHSE policy and objectives.
• Ensure that employees are aware of the impact of their activities on the environment.
• Participate/ attend all functions, activities and meeting organized by the company.
• Perform other assignment and duties as and when required.

ACCOUNTABILITIES

• Ensure the QHSE requirements are effectively maintained and followed.
• Ensure responsiveness to inspection requests and technical support to the team.
• Ensure all plans are met.
• Work with the team to achieve QHSE objectives.
• Maintain good housekeeping at all times.

QUALIFICATION & EXPERIENCE

• NTC / Nitec preferably in Quality or Mechanical Engineering discipline or equivalent.
• Preferably 1 years of relevant experience in a Quality Inspector role.
• NDT (MT and PT) Level 2 certificate
• Ability to use and read Monitoring and Measuring Equipment (Vernier, Micrometer, Gauges, CMM machine, etc)
• Interpret and read Engineering Drawings.
• Familiar with ISO and API requirements / standards is preferred.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated

Key Role

• Support the Team Lead in conducting compliance assurance testing on 1LOD/2LOD AML/CFT controls on a regular basis or as required.
• Adopt and adapt the Group’s testing methodologies in carrying out the reviews
• Independently design and develop review programs for effective execution
• Identify AML/CFT compliance related risks, escalate and provide suitable recommendation for findings detected
• Document and perform record-keeping for reviews conducted
• Prepare case summary reports and presentation deck for management reporting
• Support AML/CFT compliance activities and take part in assigned projects on an ad-hoc basis
• Be the main liaison for Compliance for all internal and external AML Compliance related audit engagements
• Stay abreast of regulatory developments and best practices within the region
• Prepare training materials and conduct trainings, if required

Other function(s)

• Assist the Team Lead in carrying out any assigned duty relating to compliance;

Carry out any other projects or work as and when directed by the Head Group Compliance, Singapore from time to time.   

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Internal Code: A24060

What will you do?

• Design and implement comprehensive test plans, test cases, test data and test scripts to ensure the quality of software products.
• Collaborate with Product Owners and stakeholders to define test objectives, scope and entry/exit criteria for testing phases.
• Perform system testing (e.g., functional and performance testing).
• Develop and maintain automated test scripts and tools.
• Review and analyse test results, identify defects and anomalies and work closely with the stakeholders to resolve issues.
• Continuously improve the software testing process by identifying areas for improvement in testing practices and tools.

What are we looking for?

• Strong background in Computer Science, Computer Engineering, Information Systems Management, Information Technology or related disciplines.
• At least 3 years of experience in software quality assurance testing.
• Strong knowledge of software testing methodologies, tools and processes.
• Experience with test automation tools such as Selenium or similar.
• Experience in performance testing tools such as JMeter or similar.
• Experience with programming languages such as Java, Phyton, or similar.
• Experience in issue management and continuous integration tools such as Jenkins, JIRA, or similar.
• Familiarity with Agile development methodologies and experience working in Agile teams.
• Familiarity with cloud-based testing tools.
• Knowledge of security testing methodologies.
• Strong analytical and problem-solving skills.
• Excellent written and verbal communication skills and strong collaboration skills.
• Ability to work independently and as part of a multi-disciplinary team.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Co-Development Business Unit is looking for Software Quality Engineer

Internal Code: A24079

What will you do?

We are seeking a Software Quality Engineer to be part of our central Quality Assurance team in the Group Planning & Operation, which is responsible to support the work of our colleagues at the various agencies thru establishing QA processes, best practices, implement tools and automated testing to ensure the consistent delivery of quality IT systems across agencies.

Your deep domain expertise in QA and testing will be most valuable to the team in building a strong foundation of QA for the delivery of quality ICT systems for agencies.

• Responsible for defining QA and Testing process/practices (e.g. Test Management, Defects Management, Code Quality), QA metrics, management tools and test automation strategy across agencies as well as curate relevant and suitable Testing Courses.
• Coach IT Business Analysts and end users from the government agencies on QA and testing process/practices and test management tools to the IT teams and end users in the government agencies.
• Be part of the team at selected projects at the government agencies
• Champion and drive product quality and QE practices in an agile/waterfall project delivery
• Collaborate with multiple internal and external stakeholders to ensure that the product is built right

What are we looking for?

• Degree in software engineering, computer engineering, electrical engineering or infocomm-related discipline.
• At least 5 years of experience in creating and implementing test strategy for systems in agile development environment.
• In-depth knowledge of a variety of test types, test levels, testing techniques and methodologies and test automation.
• A strong understanding of test-driven development (e.g. ATDD), continuous integration and continuous delivery both in principle and in practice.
• Hands-on test automation experience and experience in integrating test automation into the Continuous Integration chain as well as certification in Testing and Software Quality Assurance will be a bonus.
• Organised, methodical and meticulous in planning, management and execution.
• Team player who is self-motivated, independent, proactive, quality-conscious, customer-oriented and results-oriented.
• Excellent writing skills, good verbal communications skills and good presentation skills.
• Strong foundation in test methodologies, good analytical skills, attention to details and problem solving.

What do we offer?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Job Details:

• Location: Near Pioneer MRT
• Monday to Saturday 5.5 days work per week
• Monday to Friday 8am to 5pm and Saturday 8am to 12.15pm
• Oil and gas / Precision Engineering - Manufacturing

Job Description:

• Reject or return raw materials, component parts which failed to meet specifications or not properly labelled
• Red flag procedural non-compliance and quality issue to higher management
• Update and maintain records of quality check conducted
• Ensure Receiving, First Article, In-process and Final outgoing inspection conformed to quality aspect of engineering drawings
• Parts quality inspection must meet production schedules and time lines for delivery
• Measure product dimensions and ensure all quality aspects of the job met specifications as in engineering drawings
• Generates quality inspection reports per customer requirement
• Ensure parts identifications are properly labelled upon received, during production and completeness for delivery
• Maintain active calibration validity and integrity of all inspection equipment and gages

Job Requirements:

• GCE “N” or “O” level / NTC 2 or NTC 3 in Metal Work
• Minimum 1-year experience in quality control field
• Ability to use common measuring instruments like gauges, calipers, micrometers and profilometers
• Able to interpret technical drawings and engineering specification
• Good communication skill, basic computing skill and a team worker

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Description

• Assess the work hazards, submit risk assessments, mitigating measures and address all comments from the OIC prior to commencement of all works.
• Submit method statements where necessary to the OIC for approval before the commencement of inspection works.
• Plan, manage and co-ordinate all activities related to the work programmes as set forth in the Requirement Specifications.
• Prepare and submit all programmes, schedules (daily, monthly), monthly progress reports to the OIC.
• Check on the progress of works and ensure inspections are carried out according to schedule, unless prior approval has been sought to make adjustments.
• Ensure that all resources, equipment, etc are in good working condition at all times, and ensure timely and adequate covering for Inspectors who may be unable to perform their roles at any point in time
• Ensure that all inspection works carried out are in accordance with the Requirement Specifications and comply with any written law and statutory requirements in Singapore
• Ensure that the team of inspectors are equipped with the necessary equipment and that the inspectors are competent and well versed with the Authority’s standards and requirements.
• Ensure proper and adequate covering for Inspectors who may be unable to perform their roles at any point in time.
• Ensure that Inspectors’ daily inspection reports and other additional reports or findings are in order.
• Any other tasks as instructed by the OIC or Authority.

Job Requirements

• 5 years of relevant experience and knowledge in Project Management and Engineering Works to manage all the various types of works as set forth in the Requirement Specifications and to assume all the duties and responsibilities as set forth in the Contract
• A Degree in Civil Engineering recognized by the Professional Engineers (PE) Board or other qualifications acceptable by the Commissioner of Building Control for registration as Resident Engineer.
• A certificate in Pavement Construction and Maintenance which is awarded by the Building Authority (BCA), or equivalent and has completed a course on Code of Practice for Traffic Control at Work Zone.
• Able to communicate and write effectively in English; Minimally a Pass in English Language as first Language at GCE’ O level or equivalent.

Project duration : 1 Year +(1 Year Extension)

Work Shift : Day Shift & Night shift

1. Develop and implement QA/QC inspection and testing protocols in accordance with specifications and regulatory requirements, ensuring comprehensive coverage for major projects.

2. Lead and manage a team of experts to uphold the Quality Management System, policies, and standards, ensuring seamless execution of all quality-related activities to meet specified standards.

3. Create and execute preventive measures and corrective actions for non-conforming products, including training to enhance awareness of quality procedures and individual responsibilities in the QA/QC process.

4. Plan and coordinate site activities, resolving drawing discrepancies and details as necessary.

5. Collaborate with consultants and subcontractors for inspections and attend meetings as required.

6. Work independently and as an integral part of the Site Management team.

7. Support the Construction/Project Manager in overseeing daily construction and site coordination activities.

8. Document and report any non-conformances, conducting root cause analyses as needed.

9. Monitor and ensure implementation of corrective actions and continuous process improvements.

10. Conduct inspections of in-progress and completed work to ensure compliance with project specifications and approved construction drawings.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

• Develops, implements and maintains the Quality Management system according AS & ISO standards.
• Ensures all Corrective and Preventive actions are closed timely.
• Organizes and leads annual internal, external and customer audits.
• Organizes parts replacement for all customer’s complaint and feedback by resolving them in a timely manner.
• Ensures all measuring equipment are calibrated.
• Formulates, establishes a quality plan for outgoing inspection check on all parts.
• Reviews and to provide disposition for all items in the Quarantine area.
• Prepares Quality Performance metrics and reports to management.
• Drives supplier improvement plan/actions effectively.
• Conducts supplier process audits to drive process standardization, waste elimination, and drive improvements via statistic controls.

Job Requirements:

• Bachelor’s Degree.
• At least 1 years experiences in a similar manufacturing environment.
• Good knowledge in Quality Management System (e.g. ISO 9001).
• Strong and Competent Problem-Solving Skill and Statistical Process Control.
• Experience in managing the Customer Requirement and Complaint.
• Excellent communications skills, both verbal and written.
• Strong Microsoft Office skills (e.g. Excel, Word etc)

• Monthly Salary: Up to $3,700
• Contract Duration: 9 Months
• Shift: 12 Hours Day Shift
• Location: Jurong Island

Responsibilities:

• Conduct and analyze tests on finished products to support batch approval and rejection processes.
• Accurately record test analysis results following QA good documentation practices.
• Perform test analyses on non-routine samples, including retests, customer complaints, or rejections.
• Prepare chemical reagents used in the lab and maintain proper housekeeping (washing glassware, cleaning work areas, and equipment).
• Monitor and record inventory levels of chemicals and glassware, informing the QC Manager for replenishments as needed.
• Coordinate and send samples to external labs for additional testing (e.g., microbial analysis and heavy metals).

Requirements:

• Diploma/Degree in Chemistry with chemistry lab testing internship experience (Entry Level).
• Willingness to work a 12-hour day shift.

Interested candidates can forward their CVs in MS Word format to [email protected]

Reg No. R1983718

Triton AI Pte Ltd

License no. 21C0661

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

Provide recommendations and timely updates on equipment degradation problems.

Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

Preparation of final inspection reports with all findings, abnormalities and recommendations.

Ensure quality of inspected items to meet project requirements and standards.

Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

Read, understand project related ITP, procedures, specification requirements.

Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

Knowledge in welding inspection

Eligibility Criteria

Graduate Engineers with 3-6 years of relevant experience.

Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

Experience in Refinery and Oil & Gas must

Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

Work Independently and can work in Singapore and other countries.

Fluent Reading, Speaking and Writing in English.

Willing to commit 24 months contract/ project completion.

Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

Energetic & Result Orientated.

Quality Systems

• Supports overall maintenance of quality systems
• Monitor and reports on the quality performance for Asia Operations such as product quality performance, supplier performance and gaps for continuous improvement to the management team
• Maintains the Mastercontrol and ISO document control system
• Maintains customer related documents such as Quality Agreement, PPAP
• Part of the Global Quality Team, to design and implementation of global policies and systems

Quality Policies

• Ensures effective implementation of all company quality policies
• Implements ISO and other recognized standards
• Implements and monitors statistical techniques such as R&R’s to identify opportunities for improvement.
• Sets, communicates, and implements quality objectives in line with business goals
• Manage supplier and customer programs (CCAR, ICAR and SCARs) to ensure that complaints are handled effectively and timely.
• Support and work with different stakeholders on reporting, monitoring and resolution on customer complaints.
• Support and work with Supply Chain and Operation on supplier quality issues.

Auditing

• Leads ISO quality standards implementation as Management Representative.
• Conducts and leads quality audits to specific quality standards.
• Leads customer related audits
• Conducts supplier audits
• Conducts internal audit investigations for product quality and process issues
• Responsible for ensuring timely resolution to audit findings

Training

• Provides training for all employees on basic quality and statistical concepts
• Provides training to appropriate personnel for updates and changes to quality policy
• Attends relevant external training sessions/courses and shares learning internally

We are searching for a dynamic Technical Project Manager to lead our platform team in developing and delivering next-generation solutions. This role requires a strong background and deep understanding of web3 technologies, Hadoop and blockchain protocols.

Responsibilities

• Define and communicate a clear product vision aligned with the company's objectives and market trends.
• Provide technical guidance and expertise to cross-functional teams, ensuring successful execution of product initiatives
• Implement agile methodologies and best practices to streamline development processes and accelerate time-to-market
• Conduct market research and competitor analysis to identify opportunities for differentiation and innovation.

Requirements:

• Strong technical background in computer science or software engineering, with experience in managing complex systems.
• Deep understanding of web3 technologies, including blockchain protocols, decentralized applications (dApps), and smart contracts.
• Proven track record of working effectively with engineering teams, both internally and externally, to deliver high-quality products on time and within budget.
• Excellent communication and interpersonal skills, with the ability to articulate technical concepts to non-technical stakeholders and engage with the Web3 community.
• Involve in writing Map Reduce jobs and giving input to HDFS for further processing.
• Responsible for data movement from client library and relation database to HDFS using Sqoop.
• Writing Pig Latin scripts and HiveQL.
• Managing and deploying on Hbase on Pseudo distributed cluster
• Experience across range of technologies/platforms/tools – Cloudera Hadoop, Spark, Hive, YARN, HDFS, MARIADB, Spark Streaming, Kafka, Spark SQL, Zeppelin, Grafana

Summary

The Quality Assurance Engineer (QAE) provides guidance, expertise, and services to ensure process and product quality of instrument products. The QAE supports compliance to the ISO 9001 quality system; internal auditing; material, process, and production controls; and other aspects of quality assurance to ensure compliance to standards, regulations, and guidelines. The QAE works cross-functionally with R&D to support new product introduction; with Manufacturing to create and modify procedures to ensure requirements are met; with Procurement to ensure incoming material meets specifications and suppliers meet quality standards; and within Quality to ensure overall compliance of products and processes.

Key Accountabilities

• Demonstrate knowledge of and adherence to site safety requirements.
• Execute goals and strategy for corporate and site level activities based upon company’s business objectives.
• Support supplier quality management activities, including audits and supplier performance evaluations.
• Investigate customer complaints and internal non-conformances, leading root cause analysis and implementing corrective and preventive actions.
• Participate in new product development projects, providing input on design for manufacturability and quality.
• Collaborate with various teams and leadership to develop and implement quality assurance strategies, policies, and procedures.
• Conduct regular inspections and tests on products, materials, equipment and processes to ensure compliance with quality standards and regulations.
• Analyze quality data and metrics to identify trends, root causes of issues, and opportunities for improvement.
• Develop and maintain quality documentation, including standard operating procedures, work instructions, and quality records.
• Lead or participate in cross-functional teams to address quality-related issues and drive continuous improvement initiatives.
• Maintain accurate records and reports related to quality control and compliance activities.
• Perform other duties necessary for the effective operation of the QMS.

Requirements

• Bachelor’s degree in engineering or related field
• 3 years of relevant working experience in a customer quality, process quality or engineering role, preferably in a manufacturing environment.
• Experience with root cause analysis, corrective actions, and quality improvement methodologies (e.g., Six Sigma, Lean).
• Ability to support Quality Management during audits and inspections.
• Excellent analytical and problem-solving skills, with the ability to interpret technical data and drawings.
• Knowledge of computer software like SAP, Microsoft Office applications (Word, Excel, PowerPoint).
• Ability to prioritize and work independently and proactively is critical for success.
• Previous experience in an ISO 9001, 13485 or GMP compliant manufacturing environment
• Previous experience with quality management system software for quality data tracking and document change management (e.g., TrackWise, MasterControl, Agile, QCBD, etc.) and internal auditor certification.

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are "Solar's Most Trusted"!

RESPONSIBILITIES

This is a quality engineering position. The incumbent shall execute the quality assurance role with good technical rationale and understanding, acquired from developing an appreciation of the industry practices, and applicable technology developments. Scope of work may include Quality management system improvement, quality assurance planning, supplier management, in-process quality control design and outgoing quality controls. Fresh graduates are encouraged to apply.

Essential Duties and Responsibilities:

Quality Management System according to ISO 9001

• Review and update Quality Management System procedures to meet the quality system requirements
• Maintain and update documents and records with proper documentation control & distribution
• Ensure system compliance & preparations for Management Review
• Manage internal and external corrective action reports (CAR)
• Maintain and improve the calibration management system
• Manage, conduct and improve internal audit programs and document review procedures
• Ensure readiness of all sections for both 3rd party certification body and customer audits
• Liaise with external auditors and certification bodies in conducting audits
• Conduct QMS and change management related training and coaching activities as part of organizational competency development

Product Development Framework

• Schedule decision gate review meetings on request according to regular review schedule slots
• Support technical project managers and department heads on preparation of project decision gate presentations in accordance to REC project execution guidelines, to ensure that projects are delivered timely and meet targeted technical and business objectives adequately
• Continuous improvement of the phase-gate review design and process

Product Certification and Reliability

• Manage the interface between international and national certification bodies and internal project teams in product certification compliance to international product standards (UL, IEC) and statutory requirements
• Maintain meeting minutes with certification bodies and file certification documentation in web-based database
• Monitor product reliability trends and analyze product testing results as part of reliability scope
• Initiate product reliability studies based on known data from internal and external testing

Supplier Management and Quality Assurance Planning

• Manage the qualification of new materials/suppliers.
• Manage the incoming quality of the materials
• Drive supplier quality through audits and efficient rating system and reviews to ensure conformance to specification and continuous improvement in system, procedures and processes.
• Develop and implement quality control plan for adequacy and suitability for the production
• Drive improvement of process and product quality by monitoring quality indicators (SPC, Yield, defect rates)
• Non-conforming materials and products management
• Benchmark, develop and implement inspection methods and procedures to meet quality objectives, product quality, quality assurance, technical goals and productivity savings.

Communication and Presentation

• Ability to communicate and present at all levels of the organization

Others

• Perform other duties as assigned
• Depending on the competencies developed, the engineer may be rotated to different departments

WORK LOCATION: REC Solar, 20 Tuas South Avenue 14 Singapore 637312
(Company Transport available to/from selected locations islandwide.)

Technical / Professional:

• Minimum bachelor's degree (engineering discipline preferred)
• Knowledge and working experiences in QMS and ISO 9001 audit, preferably in manufacturing industries
• Experience in using quality tools for problem solving
• Experience in GR&R, FMEA, SPC, MSA.
• Fresh graduate with strong technical and analytical interests will be considered

General:

• Strong sense of ownership and self-motivation, good initiative
• Must be able to work independently
• Proactive working attitude hands on approach
• Strong organization and project management skills
• High level of accuracy with special attention to detail.
• Ability to write procedures and work instructions.
• Excellent presentation, interpersonal and communication skills with demonstrated ability to communicate effectively with all levels of management, both internally and externally.
• Proficiency in Microsoft Office applications
• Good time management with ability to handle pressure and multitask under tight timelines
• Ability to work with limited supervision and through extended hours when needed
• Working experience in Solar/Semiconductor/Electronics manufacturing industry is advantageous.

COMPANY DESCRIPTION

Founded in Norway in 1996, REC Group is an international pioneering solar energy company with a strong footprint in North America, Europe and Asia. We are part of Reliance Industries Limited (RIL), a Fortune Global 500 company that shares our passion for bold innovations that empower people with clean energy solutions and drive global energy transitions. A trusted partner for customers, consumers and employees, we are "Solar's most trusted"!

RESPONSIBILITIES

This is a quality engineering position. The incumbent shall execute the quality assurance role with good technical rationale and understanding, acquired from developing an appreciation of the industry practices, and applicable technology developments.Scope of work includes quality assurance planning, supplier management, in-process quality control design and outgoing quality controls. Fresh graduates are also encouraged to apply, and for those who wish to make a career in Quality in a World Class High Tech Manufacturing Facility in Singapore.

Essential Duties and Responsibilities:

Quality Assurance Planning

• Develop and implement quality control plan for adequacy and suitability for the production and during new product introduction
• Drive improvement of material, process and product quality by monitoring quality indicators (SPC, defect rates)
• Non-conforming materials and products management
• Benchmark, develop/innovate and implement inspection methods and procedures to meet quality objectives, product quality, quality assurance, technical goals and productivity savings.
• Support customer audits and 3rd party inspection routines (by way of preparing quality data presentation, technical write ups)

Supplier Management

• Manage the qualification of new materials/suppliers & incoming quality of the materials
• Drive supplier quality through audits to ensure conformance to specification and continuous improvement in system, procedures and processes.
• Drives supplier performance through processes, efficient rating system and reviews.

Supervision of Quality Inspectors that support Production Operations

• Manage team of quality inspectors on daily routines and communications
• Plan shift activities with inspector team leads

Projects

• Develop understanding of product reliability and its corresponding components' contribution (based on product performance characterization and defect understanding)
• Support product qualification process (Provide quality requirements in FMEA, SPC, DOE, Control plan and other processes and procedures as required/suitable)

Quality Management System

• Participate in internal quality audits to drive conformance and continuous improvement in product quality
• Execute in accordance to QMS requirements (ensure timely updates to documents, WI, SOPs)

Communication and Presentation

• Ability to communicate and present at all levels of the organization.

Technical / Professional:

• Minimum bachelor's degree (engineering discipline). Preferably Mechanical or Electrical.
• Engineering knowledge in SPC controls or lean and six sigma methods and software tools.
• Engineering knowledge in using quality tools for problem solving
• Aptitude in higher level use of Excel (E.g.: Formulas and Macros) is an added advantage

Technological:

• Interest in following up and developing understanding of the technological developments in the industry on both products and components
• Expect to develop as an expert in Quality Management Systems and related standards and requirements (ISO 9001, IEC62941), if not already adept.
• Experience in reliability engineering would be advantageous.

General:

• Strong sense of ownership and self-motivation, good initiative, work independently.
• Proactive working attitude hands on approach
• Ability to handle experimental planning and perform product testing and report writing.
• Excellent presentation, interpersonal and communication skills with demonstrated ability to communicate effectively with all levels of management, both internally and externally
• Good time management with ability to handle pressure and multitask under tight timelines
• Willing to travel

People / Relations:

• Ability to interface and communicate effectively with cross-functional team and external

COMPANY DESCRIPTION

REC Group is an international pioneering solar energy company dedicated to empowering consumers with clean, affordable solar power through high-quality solar panels with a leading power density. As Solar's Most Trusted, REC is known for its patented innovations and multiple award-winning products with reliable long-term performance. The cornerstone for REC's strong reliability is advanced and highly efficient manufacturing using Industry 4.0 practices. Founded in 1996 in Norway, REC has always been committed to a low carbon footprint in its solar materials and panels. REC is headquartered in Norway with operational headquarters in Singapore and regional hubs in North America, Europe, and Asia-Pacific. As of December 2021, REC is part of Reliance Industries Limited, India's largest private sector company with revenues of USD 104.6 billion.

Find out more at recgroup.com

RESPONSIBILITIES

• Drive customer issue resolution activities following the claims management process, i.e. root cause analysis, containment, corrective action, and factory process / quality controls improvements to prevent recurrence of problems and efficacies of detection.
• Process field claims in a timely manner for resolution.
• Work with regional Technical Product Managers to resolve field claims. This includes performing failure analysis and field visits to customer sites/installation.
• Providing timely engineering insights including failure analysis technical reports and presentation.
• Analyze product warranty claim and provide modeling on product service life.
• Collaborate with cross functional teams, contributing to the domain of product FA or characterization.
• Handles customer visits and factory audits and product inspection.
• Develop & contribute to building knowledge base of degradation from product to material level.
• Design tests to detect infant mortality and mid-life product failures.
• Perform investigation including product reliability data analysis, and modeling product performance behavior to identify opportunities in future development or continuous improvements for current technology.

• Bach / Masters / Phd Degree in Engineering or Science (Electrical, Mechanical, Physical Sciences)

REQUIRED SKILLS

• Problem-solving, failure analysis and trouble-shooting, statistical data analysis and design of experiment
• Application experience in managing (large) data modelling would be favorable
• Excellent practical knowledge and use of Microsoft Office
• Excellent interpersonal skills, strong belief in driving for quality and customer satisfaction.
• Ability to interface and communicate effectively with cross-functional teams as well as external stake holders and external auditors.
• Communicate effectively through presentation and technical reports.
• Enjoys rigors of technical reviews with peers & management to drive to business outcome.

• Legislative and regulations are integrated into operational activities.
• Annual HSE and Quality plan in place.
• Implementation and monitoring of HSE and Quality and plan.
• Verification of the overall wellbeing of the organisation health thru planned and ad hoc internal and external audits and inspections.
• Consolidation and upward reporting of HSE and Quality indicators.
• Take personal responsibility for HSE.

Requirements:-

• Min Bachelor Degree in relevant subjects with at least 6 years of relevant experience.
• Certified Safety Officer.
• Competency in OSH and Quality in terms of audit and implementation.
• Proficiency in written and verbal English
• Excellent interpersonal and communication skills.
• Proficient in Microsoft Office.

Responsibilities

· Help drive product strategy through strategic partnerships with core developer partners.

.To actively plan, promote and market the use of the event space and its other Company's properties to other organizations for the staging of events which will draw crowds and create excitement, while at the same time ensuring the generation of income.

· Define partner success requirements, produce qualitative and quantitative analysis of partner and product impact, aggregate and translate feedback, explore new strategic opportunities, inform the product roadmap with enhanced or new functionality.

· Set, track, analyze and communicate key partner performance metrics and business trends.

· Represent the company in external meetings with senior executives from other companies.

· Maintain direct and active relationships with partners, including proactively resolving business, technical, and policy issues.

· Work cross-functionally with product, engineering, business development, partnerships, policy, legal, marketing, and PR to launch products and partnerships.

· Provide pre-sales support and technical presentations regarding product strategy and roadmaps, features, industry technology and competitive positioning.

Requirements:

· Bachelor Degree in Advertising / Strategic planning

· 3 - 4 years of relevant work experience with product, consulting, business development, partnership, or technical experience.

· Experience working with developer partners from Marine industries

· Ability to define, develop and lead complex projects in a fast-paced, changing environment

· Collaboration and relationship-building skills — with the ability to develop working relationships at all levels of management, both inside and outside the organization.

· Candidate should able to Speak, read and Write in Mandrian and Korea

Job Description: -

· Collaborate with process Engineers and the Engineering team to establish QC requirements.

· Document inspection criteria and develop quality plans.

· Work with QA process and product team on corrective action with quality issues.

· Ensure all products meet the required quality standards.

· Manage the product quality from raw material to finish products for assigned customer account or project basis.

· Implement and improve the quality control from incoming inspection to outgoing inspection.

· Liaise with customer complain or any internal non-conformance, lead in problem solving & documentation & internal communication.

· Meet quality objective set by management.

· Train, assess and certify QA inspectors/ technician when required.

· Perform internal audit and quality system audit periodically.

Job Requirements: -

· Minimum Diploma in Manufacturing / Mechanical Engineering.

· At least 5 year of relevant working experience in electronics product manufacturing environment.

· Able to comfortable liaise and resolve quality issues, implement corrective action ,q note rise,RFA,NCR closing and establish quality control process.

· Knowledge in ISO9001and API standards

· Basic knowledge in product measurement & GD&T.

· CMM Knowledge ,Height Gauge and other related measuring instruments must know.

Responsibilities:

• Coordinating and tracking all Material Review Board (MRB) non-conformance materials and performing timely inventory transactions.
• Assist with or lead non-conformance investigations and material assessments.
• Provide investigation feedback on non-conformances and seek resolutions
• Verify parts returned from suppliers before returning to stock.
• Monitor and coordinate the routing, approval, and implementation of Engineering Change Orders (ECO) / Procedural Change Orders (PCO) using AGILE.
• Undertake any ad-hoc projects or duties as assigned by Quality Engineers and the Quality Manager.

Requirements:

• Preferably with 2 years of experience in quality control, engineering, inspection, document control, or related work.
• Ability to read and interpret engineering drawings is advantageous.

Apply now and be a part of a team where your skills, ideas, and expertise truly make a difference! Send your CV to [email protected] for a confidential chat.

PS: However, only shortlisted candidates will be notified.

EnviroDynamics Solutions Pte Ltd | EA License No.: 12C6285

Xie Jiani | EA Personnel Reg No.: R1548854

Responsibilities:

• Coordinating and tracking all Material Review Board (MRB) non-conformance materials and performing timely inventory transactions.
• Assist with or lead non-conformance investigations and material assessments.
• Provide investigation feedback on non-conformances and seek resolutions
• Verify parts returned from suppliers before returning to stock.
• Monitor and coordinate the routing, approval, and implementation of Engineering Change Orders (ECO) / Procedural Change Orders (PCO) using AGILE.
• Undertake any ad-hoc projects or duties as assigned by Quality Engineers and the Quality Manager.

Requirements:

• Preferably with 2 years of experience in quality control, engineering, inspection, document control, or related work.
• Ability to read and interpret engineering drawings is advantageous.

Apply now and be a part of a team where your skills, ideas, and expertise truly make a difference! Send your CV to [email protected] for a confidential chat.

PS: However, only shortlisted candidates will be notified.

EnviroDynamics Solutions Pte Ltd | EA License No.: 12C6285

Xie Jiani | EA Personnel Reg No.: R1548854