1. Lead and support QC team for daily QC activities by ensuring timely analysis, documentation, and review of RM/PM/FP/IPC/Stability and Process validation samples as per predefined standards.
2. Write and / or review controlled documentation related to laboratory operations or testing such as SOP's, analytical protocols, analysis reports, forms and validation documents.
3. Ensure compliance with FDA/USP/EP/ICH/ChP regulations and internal controlled procedures in the QC Laboratory.
4. Ensure readiness of QC Laboratory in internal / external audits.
5. Maintain data integrity in Quality Control activities and ensure appropriate traceability.
6. Initiate change control documents.
7. Lead and participate in stability program, method validations, technical transfer, method transfer and validation / qualification activities at the site.
8. Participate in New Product Introduction activities.
9. Lead and participate in laboratory investigations. Document laboratory investigation activities or review and approve laboratory investigation reports.
10. Participate in site corrective action / preventive action (CAPA) program. Ensure timely completion of all commitments made under QMS.
11. Lead and participate in key performance indicators for improving laboratory efficiency, monitoring equipment performance.
12. Lead QC Department training program by imparting training to new staff and comply with Analyst Qualification procedure.
13. Escalate the quality events, trends as appropriate to QC Head.
14. Remain abreast of current regulatory, pharmacopeia and cGMP trends.
15. Serve as subject matter expert on laboratory instrumentation and compliance issues.
16. Lead the QC team, evaluate competencies, assign responsibilities, monitor performance, counsel and provide guidance. Plan & monitor the training and development requirements, motivate staff appropriately to build a committed, motivated & competent team.
17. Participate in personnel decisions (interviewing, hiring, performance appraisals, promotions, termination, staff development, improvement plans) regarding subordinate staff.
18. Maintains a safe laboratory environment by implementing recommendations made by EHS.
19. Initiate CAPEX for equipment purchases.
20. Support in budget preparation for QC Laboratory.
21. Any other activities as and when assigned by the Superior.

EDUCATION:

Degree in science or related discipline (e.g. Chemistry, Chemical Engineering).

EXPERIENCE:

Minimum 8 years of quality control experience in pharmaceutical manufacturing industry and minimum 2 years of supervisory experience in managing team.

KNOWLEDGE & SKILLS:

1. Possess working knowledge of GMP in the pharmaceutical industry.
2. Excellent interpersonal and analytical skills, good verbal, and written communication skills.
3. Working knowledge of qualification, calibration and operation of laboratory equipment such as HPLC, GC, FTIR and Dissolution equipment.
4. Working knowledge of method development, validation, verification of analytical method.
5. Familiarity of 21 CFR Part 11 requirements.

Job Requisition

• Diploma in any field

• Experience in sales operations and sales support is an advantage

· Proficient in using CRM system such as Zoho and MS office Suite

· Familiar with data analysis and reporting tools

· Able to multi-task and meet tight deadlines

· Good interpersonal and communication skills

Responsibilities

• To provide support and assistance to the sales team
• To prepare reports and other documents required by the management
• To liase and coordinate with Operations and Sales team
• Able to follow up closely with new and existing clients
• Check incoming e-mails and prepare quotations
• Assist with additional tasks/initiatives as assigned

With 1500 employees worldwide, a Swiss company BAUMANN Springs (www.baumann-group.com) established in 1886 is a leader in the world of Springs, Stampings and Solutions. Running with the 5th Generation in place and our guiding principles of Time, Together and Inspiration, our employees Care, Compete, Learn and Celebrate universally.

With the growing requirements of our major customers, our presence in Asia was established as early as 1979. Within the site in Singapore, the strength of 100 dedicated, diligent and focused employees exploits the know-how acquired over the decades to manufacture and develop custom-made products and technologies. Strong partnerships are established with international customers in key industries of Automotive, Industrial and Medical. An opportunity arises and BAUMANN Springs in Singapore is currently looking for:

Career Opportunity for a Production MANAGER

Able to lead and contribute to achieve organization’s goal towards excellence and advancement. We want someone with the ability to communicate effectively, dedicated, passionate with a positive attitude to inspire and create followers. If you possess strong analytical ability, is creative and confident, we want you.

Responsibilities:

The Production Manager will take the lead in ensuring production, including the development of procedures and knowledge transfer to the operations team

· Report to the Plant Manager, fully responsible for the customized products, varieties and operations of the

customized manufacturing process.

· Responsible for the production system planning and management - planning, formulating and implementing

process strategies, roadmaps, and updating iteration plans

· Responsible for data analysis and promote data exchange between the entire supply chain including quality and

safety.

· Responsible for coordination and communication with the sales and engineering team on the process from

design, development to launch, and promote the achievement of product goals

· Cooperate with the logistics department to ensure that all deliveries are met promptly according to

commitments to customers.

· Work closely with the Sales and engineering team, involve in business planning strategies

· Responsible for ensuring the core personnel of each process are in place and carry out as per process flow and

product specification.

· Other tasks within the scope of responsibility

Requirements:

· Degree or a good Diploma in an engineering discipline, or equivalent

· More than 8 years of experience in Operation and management

· Mandatory to have interest and strong operational and executional experience

· Understand industrial trends, rules, and business logic and I4.0

· Have a keen sense of commitment

· Strong analytical skills, problem solving skills, critical thinking

· Strong business acumen, be customer focused, team and results-oriented

· Able to read drawings and industrial application material science

- Experience with ISO 9001/ IATF 16949/ ISO 13485 and QA system added advantage

Work location:

Located in the Tuas Area – Gul Lane

5 days’ work week

Interested candidates, email resumes in MICROSOFT WORD format, stating current, expected salary, date of availability and reason for leaving current employment to:

[email protected]

Responsible for operational requirements to ensure professional, efficient delivery of the company's services.

- managing sales cycle (proposal, negotiation, booking).

- working closely with the Technical/Services/Training team to ensure fulfilment of projects in a timely manner whilst ensuring budgets are met.

- manage non-technical services aspects to ensure professional, efficient delivery of services.

- ensure training teams are operating effectively.

- support marketing team initiatives including market research, promotion & cross-selling of company's products & services.

- define and lead local team to delivery according to business plan & budget.

- participate in internal and external ISO audits.

- shall be required to perform other related duties as requested to met the ongoing needs of the organisation.

For our business success and our people growth, you will lead and run all production and laboratory teams at the Tuas site while in compliance with relevant WSHE regulations and company operating procedures with collaboration with our great talents from all over the world.

Principal Duties and Responsibilities:

• Take the leadership of various project in factory
• Provide site leadership for EHS programs and sustainability efforts to maintain compliance and continuous improvement and ensure all activities performed on the site are performed with safe operation.
• Drive a focus on quality with the goal to provide the outstanding quality to the industry and build a proactive environment that identifies and solves problems for our customers' success.
• Develop and execute a multi-year plant investment plan in coordination with business leaders and business partners
• Encourage and develop the production team for greater performance.
• Implement and share best practices with the global production team.
• Coordinate communication and interactions with governmental agencies, including requests for information, investigations / inspections and enforcement activities.
• Participate and support ISO 14001 and ISO 45001 certifications.
• Performs other duties as assigned by the Managing Director.

Qualifications & Experience:

• Bachelor of Science degree in engineering, chemical engineering preferred.
• Demonstrated ability in a production environment with proven experience leading a team.
• Experience in multi-functional administrative functions
• Experience working with independent standards organizations and certification programs such as ISO 14001, ISO 45001, etc.

Skills and Abilities / Core Proficiencies:

• Strong “consultant” skills, including the ability to influence and empower leaders and employees through collaborative engagement and building/maintaining relationships.
• High energy, motivation and dedication to take personal ownership of issues and drive them to outstanding outcomes.
• Strong business and commercial acumen
• Excellent verbal and written communication skills with a broad range of audiences.
• Ability to read, analyze and interpret technical reports and documents/standards, make sound judgments, and offer effective solutions.
• Ability to successfully lead and develop personnel and work in a team.
• Ability to handle and process confidential / critical information discretely
• Ability to work collaboratively and effectively in a team environment across multi-site organizations
• Ability to travel up to 10% of the time is required

Supervisory Responsibilities

• Plant Production Team
• Plant Laboratory and internal Quality Teams
• Plant Planning Team
• Plant Maintenance Team
• Indirectly lead plant capital engineering

ADMIN MANAGER

5.5 -Day Week

9.00am to 6.00pm / 9.00am to 1.00pm

Job Requirements:

• To assist the team members in daily operations
• Able to hold a conversation well
• To be able to communicate with colleagues as well as customer
• Ability to work as a team
• To assist in invoicing, quotation, and purchasing etc
• Ability to multitask and work independently and in teams
• Very willing to learn, have initiative and a self-starter
• To handle software for issuance of paperwork
• To be able handle customer enquiry
• Ad-hoc assignments and tasks as assign by director

Responsibilities:

• Identify and mitigate risks in contract terms, providing expert advice on contract clauses, obligations, and liabilities.
• Evaluate contractual risks and implement effective risk mitigation strategies.
• Ensure compliance with legal and regulatory standards, staying informed of changes in construction and contract law.
• Oversee the full contract lifecycle from initiation through project completion and closeout.
• Monitor contract performance to ensure deliverables meet quality, cost, and timeline requirements.
• Manage variations, claims, and scope changes, assessing their impact on contract terms and project objectives.
• Ensure contract budgets align with financial targets by tracking project expenses and revenue.
• Approve and process payments to contractors and subcontractors, ensuring accurate billing and invoicing.
• Serve as the main point of contact for contract matters with project teams, clients, subcontractors, and suppliers.
• Communicate contract requirements, modifications, and potential issues clearly to all stakeholders.
• Address conflicts and disputes that arise during project execution, collaborating with legal teams as needed.
• Ensure fulfillment of all contractual obligations, conducting regular compliance audits.
• Supervise and mentor junior contract managers, providing guidance on complex contract matters.
• Lead training sessions for the team on best practices in contract management, risk mitigation, and compliance.

Job Requirements:

• Bachelor’s degree in Construction Management, Quantity Surveying, or a related field
• At least 10 years of experience in contract management and administration, specifically in the construction industry
• Extensive expertise in contract negotiation and administration
• Relevant experience in both public and private sector projects in Singapore
• Experience managing subcontracts effectively

Strong knowledge and practical application of local Conditions of Building Contracts

JOB SUMMARY:

As a Aftermarket sales executive to the Aftermarket Sales Manager, you are responsible for working with the CPM sales team, CPM Sales Network and the Aftermarket Sales Manager, and other colleagues to define and champion commercial efforts for the entire CPM product line for the Aftermarket in South East AsiaRegion.

The focus is to both affirm our market presence within the existing customer base and grow our business in the region. After training and gaining experience, you willassist the Aftermarket Sales Manager and you will be the go to person for CPM aftermarket parts (all CPM IS products), and will work across the South East Asian region.

The Aftermarket Sales Executive directly support the Aftermarket Sales Manager and manage the work load with a focus on improving operations, standardizing processes, increasing efficiency, growing aftermarket sales, and ensuring CPM’s customers are served in a timely, professional manner.

Key avenues for success include: customer relationships, increasing sales, and driving strategic growth initiatives studying, identifying and translating the business and market opportunities into actionable recommendations in order to promote the growth of CPM and to achieve the individual, team and company turnover target.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Responsible for Aftermarket sales of all CPM product spare parts and service to customers across the SE Asia region.

· Work closely with the sales team and customer service team to drive sales to meet monthly/annual targets.

· Maintain good relation with existing accounts and develop new ones.

· Assist the Aftermarket Sales Manager with projects, sales opportunities, presentations, pricing efforts, travel, strategy, and programs.

· Understand CPM equipment to troubleshoot customer solutions.

· Build relationships with customers and sales representatives

· Increase aftermarket support and services for CPM’s equipment line.

· Create & achieve aftermarket budget, forecast, and goals for increasing CPM revenue & market share.

· Maintain expert level of product knowledge and application.

· Prepare field reports after all customer visits and distribute to the appropriate personnel.

· Maintain accurate records of target accounts, opportunities, quotes, projects, contacts and correspondence in company databases.

· Laise closely with logistic department, sales and customers to ensure on-time order fulfilment.

· Identify opportunities to improve business processes and identify, evaluate, and implement solutions.

· Manage customer accounts ensuring alignment with customer, market segment, and CPM strategies.

· Identify and understand technical requirements of customers and connecting these with CPM’s products and solutions.

· Reports to management and colleagues about market developments and new possible opportunities in the industry.

· Maintain up-to-date information on our services and products, industry, competition, and market conditions in order to present them to clients and ensure customer needs are met.

· Perform other related duties as required and assigned.

QUALIFICATION AND SKILLS

• Strong mechanical aptitude and willingness to get one’s hands dirty

• Excellent communications skills, with the ability to speak in public and to multiple levels within customer organizations, including technical specialists, procurement officers, and senior management

• SAP and customer relationship management (CRM) experience.

• Self-starter, driven, and a results-oriented sales professional

• Outcome focused with the ability to manage competing priorities and work well under pressure.

• Well-developed sales and presentation skills.

• Strong attention to detail.

• +1 years Commercial, Sales, or Operations experience within the

Food/Agriculture/Bioenergy complex.

• Enjoyment of extensive business travel (up to 50%).

REQUIREMENTS:

· Bachelor’s degree in a technical field - Electrical, chemical, or mechanical engineering preferred.

· Experience selling/supporting technical solutions, preferably within the oilseed, animal feed, biomass, food, and materials processing industries.

· Proficiency in Microsoft Office software including Excel, Teams, PowerPoint, and Word.

· Must be able to communicate in English.

As a member of the QA team, you will support the team in the implementation of the Company Wide Quality Strategy to exceed customer expectations for product quality, logistics and cost. You are responsible to support A & One’s best-in-class quality assurance and controls management systems. You are required to deliver on all required key performance indicators and drive continuous improvement across all quality functions to achieve operational excellence.

1. Manage the entire customer lifecycle, serving as customers key account managers from the first touchpoint to on-time delivery.

2. Provide technical support in sales presentations, briefings, product demonstrations.

3. Participate in monthly sales team reviews to update on the learnings and challenges.

4. Conduct pre-sales and/or post-sales technical consulting activities.

5. Coordinate client needs with various internal resources and teams.

6. Stay up to date on technology news, including trends, product roadmaps, market conditions, etc.

7. Achieve sales objectives and identify business opportunities.

8. Develop relationships with new prospects by leveraging personal and business networks.

9. Responsible for answering sales inquiries from both local and international sales markets.

10. Lead technical discussions in client meetings across multiple levels and disciplines to identify business and technical needs, issues and priorities.

11. Present project status internally and leads communication between the project team and its stakeholders.

12. Target the right clients, grow quality pipeline, win profitable deals and manage sales activities with the objective of creating mutually beneficial, trust-based relationships that create value.

13. Manage sales campaigns for top opportunities in the precision engineering domain and will be responsible for day-to-day campaign management, with emphasis on opportunity qualification, win strategy definition/execution, proposal development, orals presentation, and support of contract negotiations.

14. Act as point of contact for resolution and escalation of all key items with the client and internally.

15. Provide solutions to complex business problems for area(s) of responsibility where analysis of situations requires an in-depth knowledge of organizational objectives.

16. Collaborate with operations department and other cross-functional teams to ensure on-time delivery and zero defects to achieve 100% customer satisfaction

Requirements

Education

· Min Diploma/Degree in Mechanical, Electrical, Electronics, or Chemical Engineering

Mandatory Experience

· 3 to 5 years of quality management experience in precision engineering, contract manufacturing of complex semiconductor equipment, or wafer fab environment.

· Proficiency and knowledge in CMM Programming, measurement and calibration equipment

· Knowledge of quality systems

· Knowledge and Experience in Surface Treatment

· Experience in writing non-conformance and corrective actions reports (e.g. 8D, F23, NCR) for customers

· Experience in the processes and report writing for New Product Introduction (NPI), Prototype and First Article (FA)

· Enjoys solving complex challenges with exceptional internal and cross departmental team communication and management experience

· Proficiency in both English and Chinese to write, communicate and translate amongst non-English speaking team members

Good to Have

· Experience in using Microsoft Enterprise Resource Planning System Navision

· Basic understanding of precision engineering product drawings, blueprints and treatment specifications.

Primary Purpose:

Functions as a senior technical specialist or in a lead role in mechanical design. Works independently and applies advanced engineering techniques and analyses for problems and methods.

Responsibilities:

• Concept, Functional, Preliminary and detailed design of mechanical process systems for water and wastewater treatment plants, including screening equipment, physical-chemical treatment plants, biological treatment plants, blower equipment, odour control plants, disinfection plants and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of various pumping systems for water, wastewater and sludge treatment plants
• Concept, Functional, Preliminary and detailed design of ancillary systems including chemical feed systems, mechanical ventilation systems, and drainage systems
• Preparation of General Arrangement and equipment layout drawings
• Preparation of mechanical process equipment and pump specifications
• Mechanical equipment and pipe sizing and calculations
• Review and evaluation of vendor submissions
• Coordination with other disciplines e.g. civil, structural, electrical, building services, and instrumentation & control designers
• Lead meetings, discussions with clients, contractors and vendors
• Provide engineering support for bids & proposals
• Provide engineering support during construction
• Provide engineering support during testing and commissioning
• Provides project cost estimates to client
• Design management and project management of proposals and projects where the scope is primarily mechanical / process

Preferred Qualifications

• A Professional Engineer (PE) registered with Professional Engineers Board Singapore or Chartered Engineer
• Possess a university engineering degree (mechanical)
• Candidate shall have minimum of 10-15 years’ experience in the mechanical design of wastewater treatment (municipal and industrial)
• Able to work independently in producing the project deliverables to meet project timeline
• Leads and guide a team of engineers and carries out QA/QC work on their designs
• Proficient in written and oral communication with good interpersonal skills

JOB DESCRIPTION

Ensuring.

Optimizing profits by controlling costs. company policies are followed

Hiring, training and developing new employees.

Resolving customer issues to their overall satisfaction.

Maintaining an overall management style that follows company best practices.

Providing leadership and direction to all employees.

Ensuring product quality and availability.

Preparing and presenting employee reviews.

Working closely with the store manager to lead staff.

Overseeing retail inventory.

Assisting customers whenever necessary.

Organizing employee schedule.

Ensuring that health, safety, and security rules are followed.

Taking disciplinary action when necessary.

Ensuring a consistent standard of customer service.

Motivating employees and ensuring a focus on the mission.

Completing tasks assigned by the general manager accurately and efficiently.

Supporting Maintaining merchandise and a visual plan.

Maintaining stores to standards, including stocking and cleaning.

management as needed.

JOB REQUIREMENTS

2+ years retail experience in a leadership capacity (e.g. management, shift leader, etc.)

Bachelor’s degree or equivalent experience

Familiarity with fashion trends and styles

Ability to effectively train and motivate sales associates

Excellent organizational, problem-solving, project management and communication skills Willingness to show leadership and guidance from the floor

• All devices and equipment are properly functioning (eg POS hardware, printers, music equipment, iPad, facial recognition device, walkie-talkie, toilets etc)
• Completion of daily shift certificates
• Weekly inspection of cleanliness of restaurant and all side stations
• Submit requisition of Front-of-House consumables to Operation Manager for approval

- Full handling of guest table & seating arrangement:

• Handles table reservation system
• Man outlet phone/mobile by responding to guest inquiries and requests in a timely, friendly, and efficient manner
• Monitors restaurant activity to determine seating and dining flow
• Receive and confirm walk-in and online/phone reservations
• Usher guests to their tables and provide them with menus

2. Lead and supervise team of Supervisor and Crew

3. Maintain effective and efficient online POS & delivery order platforms

4. Plan weekly duty roster, attendance & overtime, ensuring effective arrangement and usage of manpower and seek approval from Operation Manager

• All devices and equipment are properly functioning (eg POS hardware, printers, music equipment, iPad, facial recognition device, walkie-talkie, toilets etc)
• Completion of daily shift certificates
• Weekly inspection of cleanliness of restaurant and all side stations
• Submit requisition of Front-of-House consumables to Operation Manager for approval

- Full handling of guest table & seating arrangement:

• Handles table reservation system
• Man outlet phone/mobile by responding to guest inquiries and requests in a timely, friendly, and efficient manner
• Monitors restaurant activity to determine seating and dining flow
• Receive and confirm walk-in and online/phone reservations
• Usher guests to their tables and provide them with menus

2. Lead and supervise team of Supervisor and Crew

3. Maintain effective and efficient online POS & delivery order platforms

4. Plan weekly duty roster, attendance & overtime, ensuring effective arrangement and usage of manpower and seek approval from Operation Manager

Benefits Summary

• Healthcare Division
• Basic Up $3000 + Commission
• Attractive Commission Remuneration
• Jurong East
• Monday to Friday Office Hour
• Training Provided

Job Responsibilities:

• Sourcing for potential candidates for clients
• Candidate engagement
• Collaboration with stakeholders

Requirements:

• Minimum Diploma
• Willing to learn
• Good team player, able to communicate effectively

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested candidates kindly click the APPLY NOW.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified. **

Chanel Loh Su Fui

Registration Number: R22110419

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Key Responsibilities:

• Welcome customers warmly and assist them with jewellery selection, styling and purchases
• Share with customers about the quality, value and craftsmanship of various jewellery pieces effectively
• Maintain the display cases, ensuring all jewellery is presented in an attractive and organised manner
• Process sales transactions accurately and efficiently, handling cash, credit, and digital payments
• Support inventory management, stock-taking, and merchandising efforts

Requirements:

• Previous retail experiences, ideally in jewellery
• Strong sales skills with a customer-oriented approach and a passion for luxury retail
• Polished appearance, professional demeanour and excellent communication skills
• Willingness to work weekends, evenings/holidays when required

Benefits:

• Competitive base salary and additional commissions
• Career progression
• Other variable bonuses

Aventir Group Pte Ltd
EA License: 24C2542

Requirement:

• Strong technical aptitude and the ability to understand and explain complex products and solutions
• Excellent communication and interpersonal skills, with the ability to build and maintain relationships with customers
• Problem-solving skills and the ability to think creatively to overcome challenges
• Strong negotiation and presentation skills
• Proficiency in Microsoft Office Suite and customer relationship management (CRM) tools
• Willingness to travel within the region as needed

Job Description:

• Proactively identify and pursue new sales opportunities within your assigned territory
• Develop and execute targeted sales strategies to meet and exceed sales targets
• Provide technical expertise and support to customers, ensuring their needs are met
• Collaborate with cross-functional teams to deliver seamless customer experiences
• Continuously monitor market trends and competitor activities to identify new avenues for growth
• Maintain accurate records of all customer interactions and sales activities
• Represent the company at trade shows, conferences, and other industry events

Job Details:

• Actively seek out and engage with corporate clients to drive B2B sales.
• Develop and maintain strong relationships with customers in the car trade industry.
• Identify and pursue new business opportunities to meet and exceed sales targets.

Requirements:

• Proven experience in sales, preferably within the automotive industry.
• Strong negotiation and communication skills.
• Self-driven, with a hunter mentality to seek out new business opportunities.
• Preferably own a car.

What We Offer:

• Competitive basic salary with an attractive sales commission structure.
• Petrol/Transport reimbursement.
• Work location: West Coast

**With high commissions

Job Description

• Provide support in the processing of e-commerce orders.
• Ensure the accuracy and currency of pricing and product information on e-commerce platforms.
• Monitor product inventory levels to confirm stock availability.
• Prepare sales & marketing sales reports.
• Create promotional artwork for operations purposes.
• Handle customer inquiries and provide appropriate responses.
• Manage sponsorship inquiries and facilitate the coordination of sponsorships.
• Undertake other ad-hoc tasks as assigned.

Requirements

• NITEC or Diploma in Marketing / Mass Communication / Business Admin or related fields.
• Prior marketing experience would be preferred.
• Proficient in Adobe Photoshop, Illustrator and other designing software will be an added advantage.
• Team player with good interpersonal, oral and written communications skills.
• Entry level are welcome to apply.

Job Overview: The Product Specialist for Chocolates and Cookies (B2B Sales Focus) will be responsible for managing the product portfolio, driving sales strategies, and increasing market share for the company’s chocolate and cookie products within the B2B (Business-to-Business) segment. The ideal candidate will have strong sales acumen, experience in the food industry, and the ability to develop customized product solutions to meet the unique needs of B2B clients. This role is slated for fast-track to a managerial position upon achieving key performance indicators (KPIs), providing excellent career growth opportunities.

Key Responsibilities:

1. B2B Sales Strategy & Market Expansion:
   • Identify new business opportunities, target accounts, and verticals for growth within the chocolate and cookie categories.
   • Negotiate and close deals with key business clients, ensuring competitive pricing, optimal terms, and long-term partnerships.
   • Build and maintain strong relationships with existing B2B customers to ensure satisfaction, repeat business, and identify upselling or cross-selling opportunities.
2. Product Portfolio Management:
   • Oversee and manage the B2B product portfolio for chocolates and cookies, ensuring that products meet the specific requirements of business clients, including packaging, portion sizes, and customization needs.
   • Collaborate with the marketing team to create tailored product offerings and promotional packages for B2B customers.
3. Market Analysis & Client Insights:
   • Conduct thorough market research to understand the needs, preferences, and challenges of B2B customers in the chocolate and cookie sectors.
   • Gather feedback from clients to adapt and improve the product offering, ensuring that products meet their business objectives and contribute to their success.
   • Monitor industry trends, customer demands, and competitor activities to proactively adapt the product line and sales strategies to maintain a competitive edge.
4. Customer Relationship Management:
   • Establish and maintain strong, long-term relationships with key business clients, acting as the primary point of contact for product inquiries, pricing, and support.
   • Provide excellent customer service by resolving issues, addressing concerns, and ensuring that business clients are satisfied with product quality, delivery timelines, and support.
   • Monitor and analyze customer satisfaction to drive improvements in service delivery and strengthen client loyalty.
5. Sales Reporting:
   • Provide regular updates to senior management on sales progress, new opportunities, and competitive landscape.

Qualifications:

• 3+ years of experience in B2B sales or product management within the food industry (confectionery or related experience preferred).
• Demonstrated ability to manage product portfolios and sales strategies in a business-to-business context.
• Excellent communication, negotiation, and interpersonal skills, with a focus on building strong client relationships.
• Strong analytical skills and the ability to use market data to drive sales strategies and product decisions.

Desired Skills:

• Experience in selling to foodservice, distributors, retailers, or wholesale clients in the confectionery or snack food sector.
• Ability to create customized product solutions and marketing materials for B2B clients.
• Passion for chocolates, cookies, and the confectionery industry, with the ability to advocate for products enthusiastically to business clients.

Benefits:

• Competitive salary with performance-based incentives.
• Career growth opportunities.
• Employee discounts on products.

The Product Specialist for Chocolates and Cookies (B2B Sales Focus) is a key role that will drive the growth of the company's product portfolio in the B2B market. By combining product knowledge, sales expertise, and relationship-building skills, this role will help increase market share and expand the company's footprint within the chocolate and cookie sectors.

Job Description:

• Attend to walk-in customer
• Responsible for day-to-day customer service support; including sales order entry, invoicing and making sure that deliveries have been made
• Attend to enquries, create new customer account, following up quotation with present and new customer
• Provide general support to sales team including preparing admin work & quotation
• Process orders & maintain company websites / social media
• Housekeeping
• Services: Plan Printing, Laminating, Book Binding, Photocopying
• Warehousing: Replenish stock to shelves from 2nd storey
• To perform ad-hoc duties as & when required

Job Requirement:

• 5 days work <08:20am - 17:50pm> Monday - Friday
• Able to work independently, posses good multi-tasking skill
• Physically fit to climb staircases to carry down goods

Job Description:

· Handle sales enquiries and order processing

· Provide administrative support to ensure operation efficiency of office

· Attend to customer enquiries, generate sales orders, delivery orders and customer invoicing

· Maintain good relationships and rapports with customers and buyers via email and telephone

· Maintain a well-organized record of customer database

· Handle sales enquiries and order processing

· Other ad-hoc duties

Job Requirement:

· Candidate must possess at least a higher secondary/ NITEC, Diploma in any field.

· Proficient in Microsoft Word and Excel

· Service oriented and ability to work in a team with good communication skills.

· Working Location: 60 Benoi Road (Beside Joo Koon MRT)

· Working Hours: 8.30 am to 5.30pm (Mon – Fri)

· Alternate Sat - 8.30 am to 12.30pm (consider as overtime)

Job details:

• Actively seek out and engage with corporate clients to drive B2B sales.
• Develop and maintain strong relationships with customers in the car trade industry.
• Identify and pursue new business opportunities to meet and exceed sales targets.

Requirements:

• Proven experience in sales, preferably within the automotive industry.
• Strong negotiation and communication skills.
• Self-driven, with a hunter mentality to seek out new business opportunities.
• Preferably own a car.

What We Offer:

• Competitive basic salary with an attractive sales commission structure.
• Petrol/Transport reimbursement.
• Work location: West Coast

Offer Ranged: $1000 - $8000 (with high commission)

The successful candidate will be part of a dynamic team offering state-of-the-art unique print and packaging solutions to corporate clients by leveraging on our high-end automated printing equipment for quality output and delivery.

Job Description

· Actively develop new prospects and maintained existing business accounts

· Prepare and deliver appropriate presentations on Company products and services to clients

· Conduct market research to identify selling possibilities and evaluate clients’ need

· Preparation of proposal and quotations in a timely manner

· Closes profitable business that supports business objectives

· Record monthly sales and analyse the business trends, planning for new strategies

· Sales coordination with internal departments to ensure order fulfilment from customers

· Respond to customer enquiries

· Offering effective solutions and support to clients by leveraging on our Company capabilities and resources

· Work closely with all departments to ensure order fulfilment from customers

· Preparation of proposal and quotations in a timely manner

· Any other duties as may be assigned from time to time

Requirements

· Min Diploma with 1 year relevant experience in the related field will be an advantage (Entry level candidates are welcomed to apply)

· Strong conceptual selling, presentation, closing and organizational skills

· Excellent analytical and time-management skills

· Effective negotiation and communications skills

· Self-driven, goal-oriented and motivated

· An effective team player and ability to work independently

· Understand and speak in both english and chinese

• He/She is required to prospect for new accounts, maintain existing accounts, and build relationships with newly acquired customers.
• Service corporate accounts and manage full sales cycles
• You are required to apply appropriate strategies to increase sales.
• Keep updated on market competition and prices
• Attend site meetings and responsible to liaise with our customers on their solution needs and after sales need.
• Follow up and process sales orders, sales report generation, project management and sales presentations.
• Corresponding with customers on quotations and purchase order related issues.
• Manage daily sales inquiries and quotations via email and phone for both existing and new clients.
• Work closely & coordinate with the indoor team to maximize sales figures.
• Liaise with operation team and ensure timely delivery of customers’ orders
• To prepare report after Job Done / Pump Repair Done. (Training will be provided)
• Carry out risk assessment; Make recommendations on risk control measures and Communication Risk Assessments (RA) to concerned parties and other Method of Statement. (Training will be provided)
• Any other ad hoc duties assigned

Requirements:

• A degree or diploma holder preferably in Mechanical Engineering or a related field.
• Applicants with no working experience are welcomed (Training provided)
• Strong knowledge of pumps and their applications is highly desirable
• Experience in engineering sales/customer service is a plus.
• Proficiency in AutoCAD, Excel, and PowerPoint
• Willingness to travel for business purposes as required
• Excellent communication and interpersonal skills.
• Willing to learn, pleasant personality, humble responsible, positive working attitude and hardworking.
• Ability to work independently and as part of a team.
• Proficiency in Mandarin to liaise with Mandarin-speaking clients and suppliers.
• Salary base on the working experience, additionally + Commission
• Flexible and able to Support on Saturday if required.
• Class 3 driving license with own vehicle.

ATTRACTIVE REMUNERATION PACKAGES WILL BE OFFERED TO THE RIGHT CANDICATE

Kindly send us your updated resume indicating your current and expected salary to: [email protected]

We regret that only shortlisted candidate will be notified.

Visit us at: https://www.acms.com.sg

Job summary

Attractive salary package

Learning & Development opportunity

Positive Working Environment Commission

Job Description

• Attend sales enquiries
• Develop and grow new account
• Conduct prospecting and introduce our services to prospective clients
• Handle customer feedback for improvement
• Planning and executing sales action plans to engage prospects and follow up on prospects clients
• Conduct and maintain positive customer relationship
• Achieving monthly sales target
• Actively seeking out new sales opportunities through cold calling, networking and social media
• Negotiate and close deals
• Prepare and deliver appropriate presentations of products and services
• Account management. Manage accounts and meet or exceed targets relating to revenue growth, activities, profit margin, mix of products and services sales, customer retention and customer acquisition

Job Requirement:

• Min ‘O’ Level and above
• 2 years relevant Sales experience or relevant role
• Proficient in English
• Competent in Microsoft Office
• Thorough understanding of marketing and negotiating techniques
• Fast learner and passion for sales
• Self-motivated and results driven
• Team player with good interpersonal skills
• Possess valid class 3 driving license