Responsibilities:

Project Preparation, Evaluation and Execution

• Initiate and monitor the master project schedule up to FID
• Develop high-level project descriptions including layout drawings and process drawings(P&ID)
• Prepare specifications in line with Vopak standards and estimate costs for the proposed new, modifications or expansions project
• Take lead in preparation and completion of the ITB document including Basis of Design (BoD).
• Develop bid & piping packages for smaller project portions and work with Vopak Managers to develop bid packages for larger turnkey construction project portions.
• Take lead in technical clarification with the guidance of Vopak Managers to fully assess completeness of tender proposal and detailed comparison with every tenderer
• Provide the necessary inputs on technical evaluation to identify the most appropriate proposal for awarding of tender
• Review consultant and contractor drawings, specifications and documentation in liaison with Vopak Team.
• Assist commissioning team during the commissioning stage
• Liaise with the procurement team for purchasing of equipment / material according to the approved vendor lists and prepare Request For proposal (RFP) for obtaining quotes from bidders, Tendering & BQ evaluation
• Be responsible for project record-keeping. Perform overall quality control of the work (budget, schedule, plans, and personnel’s performance) and report regularly on project status
• Provide an on-site technical and engineering service between contractor and Vopak to maintain control of construction, including site safety supervision and Safe Work Permit coordination
• Supervise and review Contractor Quality Inspection and Test Programmes. Coordinate specialist Third Party Inspections
• Review technical problems arising during construction, ensuring significant matters are formally resolved between contractor and Vopak.
• Investigate variation orders and make recommendations
• Monitor site OHS and environmental performance.
• Report to Project Manager and liaises with other discipline lead engineers to ensure proper coordination and interface among different disciplines
• Ensure that pertaining engineering activities (process, civil, marine, mechanical, piping, electrical, instrumentation and control, painting and insulation) are carried out in accordance with project requirements

Project Governance

• Support, deputise the Project Manager, and be accountable for the success of the project
• Support the Project Manager to evaluate the risk level; to seek mandate from the executive board prior to signing off; to provide leadership for the VPM roles and internal customer to manage project stakeholders; to coordinate all applicable project work streams

Compliance

• Take lead in overall compliance to Vopak Project Management (VPM) requirements.
• Conduct What-If risk assessment on changes under MOC
• Conduct Peer / Design Review as part of VPM requirement
• Keep abreast with the requirements of local legislative requirements and Vopak Corporate, Codes, Standards, and regulations
• Review of Method Statement and JSA(New)

Post Implementation Review

• Conduct project review on project and technical accomplishments
• Close-out the project and participate in a post implementation review

Stakeholder Relationship & Management

• Plan and deliver stakeholder engagement activities to develop effective project working relationships and to ensure that stakeholder needs and concerns are identified and met
• Manage internal and external stakeholder to ensure project is completed timely and safely
• Liaise with tax, legal, insurance, and treasury corporate departments / advisors on matters like e.g., contracting plan, and project execution plan

People Management

• Coach and guide other Project Team Members

Requirements:

• At least 5 to 8 years Oil & Petrochemical experience. 5 years project management experience, in similar industry
• Certified - Project Management
• Certified - Construction safety course for Project Managers
• Degree in Engineering preferably Mechanical or Process.
• Preferable to have piping experience.
• Experience in Construction and Maintenance of Jetty and Jetty topside equipments)
• Conversant with International standards such as API, ASME, ANSI, OCIMF, NFPA, Singapore Standard, Code of Practice.
• Preferable to have worked in Oil/Chemical Terminal experience
• Project or work exposure in tank engineering, construction or maintenance.
• Project or work exposure in process design or rotating equipment / terminal equipment maintenance,
• Sound Project Management skills and track record
• Project proficiency with Engineering and Operational knowledge background and experience in managing tank farms and similar projects.
• Knowledge of technical functional areas for better coordination and timely decision making
• Ability to work well in cross cultural environment
• Trustworthy, Integrity and independence
• Planning and organization skills
• Financial management skills
• Good communication (verbal and written) and interpersonal skills
• Effective problem solving skills

Job Description

Responsibilities

As a Site QE PQA Engineer in MSB, you will be responsible for inline process control, outgoing product control and deviation management to drive focus and continual improvement of site quality performance. You will support technical risk assessment of process change as well as play a key role in the Change team in determining the site process conversion strategy.

• Work with Assembly/Test/Module/SSD Process/Equipment/Manufacturing teams to drive inline and outgoing control to meet customers’ quality requirement
• Manage quality deviation and drive for closure of corrective/preventive actions to drive for deviation reduction and continual improvement
• Perform Data Mining to identify quality improvement opportunities and lead site quality improvement projects
• Support site focus on improving performance variation that impact quality performance
• Work with Global Quality, Product Engineering & Central Teams to understand key customer quality issues and drive these issues to resolution within the site
• Develop strong relationships with Global Quality, Product Engineering & Central Teams to improve business process performance.

Requirements

• Bachelor's or Masters in Engineering

JOB DESCRIPTION:

• Preparation of material requisition based on project specification/standard and regulation for rotating equipment(such as centrifugal pumps, positive displacement pumps, air and utility compressor, steam/gas turbines, etc.,)
• Technical evaluation of acceptability in line with our material requisition for Vendor’s quotations.
• Review Vendor drawings and documents for their completeness, accuracy and compliance.
• Preparation of BOM (Bill of Material) for construction engineering.
• Review other discipline’s drawing and document for interconnection design with piping, civil, electrical and instrument design, but also process design.
• Provides technical/engineering support and preparation for quality work at supplier shop and Construction/Commissioning work at site.
• Resolves technical issues using acquired knowledge that may arise during the execution of package engineering, fabrication and post-delivery.
• Organize the interface meeting among vendors and other discipline etc. for technical clarification.
• Assist Lead/Senior engineer to execute project.

JOB REQUIREMENT:

• Bachelor Degree in Engineering.
• Minimum 5 years of relevant working experience in Mechanical engineering in oil and gas sector, preferable experience in off-shore application.
• Possess relevant experience working on EPC projects.
• Familiar with International Industry Codes such as ASME, API etc.

Overview

Do you want to lead marketing and commercial plans for one of our billion-dollar brands? The Senior Brand Manager identifies business opportunities and works with the multi-functional team to build cohesive commercial plans! You are expected to lead and collaborate with different subject matter experts to deliver end-to-end plans for the region via qualifying communication ideas, adjusting portfolio pricing and identifying shopping barriers and opportunities.

Your Team

You and other Brand Managers (each handling a brand/category) will report to the Brand Director for the Category or Business Unit. You will work extensively with colleagues from Consumer Market Knowledge, Sales, Communications, Finance etc.

What Success Looks Like

• Demonstrate positive relationship building skills in initial engagements with multi-functional teams
• Deliver Scorecard Business Targets, in line with the goals of the Business Unit
• Deliver Category growth, market penetration and gaining of New Users via Products Innovation Design
• Successful Design and Deployment of Marketing Toolkits for the Brand

Responsibilities of the role

• Identify consumers’ needs and wants for P&G’s products, and provide inputs to Research & Development and technical team to design the right package and formula to win with local consumers
• Lead consumer researches to develop qualified brand concept, benefit and claims that addresses consumers’ unmet needs
• Communicate with local market partners, stakeholders and suppliers to drive P&G business initiatives
• Lead creative agencies to develop communication ideas and execute TV copy production designed/customized for the cultural nuances of local consumers
• Develop initiatives fit-for-use toolkits (including copy, prints, digital i-banners, social & eCommerce contents, sampling trial toolkits, in-store activation and demos, etc.)
• Coordinate with R&D, Consumer Research teams to qualify the product and package through various tests.
• Craft promotion/pricing strategy and customer/distributor trade terms with the local trade team
• Work with technical team to find the best solution of supply chain to manage the product cost within affordable level

Qualifications

• Bachelor’s or Master’s, preferably with some business focus
• This is a junior level management role with 3-5 years of brand management, consulting or consumer journey design experience or similar required
• Excellent forward-thinking, strategic and courageous leadership skills
• Strengths with strategic and analytical thinking
• An ability to drive innovation and brand growth
• Strong ability to communicate and team capabilities

We are looking for a skilled System Engineer with a focus on hardware to design, implement, and maintain our systems infrastructure. As a System Engineer, you will play a key role in sourcing correct System on Module, System on Chip, or Single Board Computers to achieve desired design specfications. You will collaborate with cross-functional teams to analyze requirements, recommend hardware solutions, and contribute to the overall success of our projects.

Responsibilities:

1. Hardware Design and Implementation:Design, develop, and implement hardware solutions to meet system requirements.Conduct hardware evaluations and recommend appropriate technologies to enhance system performance.
   
2. System Integration:Integrate hardware components into the overall system architecture.
   Collaborate with software engineers to ensure seamless integration between hardware and software components.
   
3. Troubleshooting and Maintenance:Diagnose and resolve hardware-related issues promptly to minimize system downtime.Perform routine maintenance tasks to ensure the ongoing reliability of hardware systems.
   
4. Performance Optimization:Monitor system performance and recommend optimizations to enhance efficiency. Conduct performance testing and analysis to identify areas for improvement.
   
5. Documentation:Create and maintain comprehensive documentation for hardware configurations, processes, and procedures.Develop and update system engineering documentation as needed.
   
6. Collaboration:Work closely with cross-functional teams, including software engineers, network engineers, and project managers, to achieve project goals. Provide technical expertise and support to team members as required.
   

Qualifications:

• Bachelor's degree in Computer Science, Electrical Engineering, or a related field.
• Proven experience as a System Engineer with a focus on hardware.
• Strong knowledge of hardware components, architectures, and technologies.
• Proficiency in hardware design and integration.
• Experience with troubleshooting hardware issues and implementing solutions.
• Familiarity with performance monitoring and optimization tools.
• Excellent collaboration and communication skills.
• Detail-oriented with a strong problem-solving mindset.

If you are passionate about system engineering, possess excellent hardware skills, and are ready to contribute to innovative projects, we invite you to join our team. Apply now and be a part of our exciting journey towards success!

PRODUCT AREA

Behind everything our users see online is the architecture built by the Technical Infrastructure team to keep it running. From developing and maintaining our data centers to building the next generation of Google platforms, we make Google's product portfolio possible. We're proud to be our engineers' engineers and love voiding warranties by taking things apart so we can rebuild them. We keep our networks up and running, ensuring our users have the best and fastest experience possible.

JOB DESCRIPTION

The Data Center team designs and operates some of the most sophisticated electrical engineering, mechanical engineering and HVAC systems in the world. Facilities Technicians at Google data centers operate, monitor and support physical facilities conditions. Some of these duties will include heating and cooling of air and water, power supply, generators, UPS systems, electrical distribution and control and monitoring systems. You regularly help inspect, maintain and repair various data center systems such as piping and non-critical electrical or mechanical system components). You provide daily assistance to senior technicians as you read blueprints/schematics, conduct tours of systems and assess their working order.

As an advocate for best practices, you develop creative approaches to reducing operational costs while improving overall data center efficiency. You ensure that environmental and safety standards are consistently met, identifying problems and making repairs quickly. In emergency situations or abnormal conditions, you manage data center performance issues and outages to minimize the recovery time from failures.

Qualifications

JOB RESPONSIBILITIES

• Operate, maintain, troubleshoot and repair electrical equipment in a data center environment. Provide Root Cause Analysis (RCA), recovery and prevention actions for service failure.
• Prepare and execute operation procedures, respond to work request/service failure and provide operational and technical expertise in required areas.
• Coordinate vendor support in repairs/replacement and support project implementation (e.g., site acceptance tests, factory acceptance tests, site inspection for defects, etc.).
• Develop an understanding of the infrastructure design and sequence of operation.
• Prepare and conduct training to the team. Ensure safety rules and regulations associated with operating infrastructure.

MINIMUM QUALIFICATIONS

• Associate's degree, trade school certification, in a relevant technical field, or equivalent practical experience.
• 2 years of experience with electrical, mechanical, and controls systems, including: Feeders, Transformers, Generators, Switchgears, Chillers, UPS systems, ATS/STS/PDU/PMM/Air handling and CRAC units.
• Experience with SCADA, power monitoring system, building monitoring system, PLC programming.

PREFERRED QUALIFICATIONS

• Experience in troubleshooting.
• Knowledge of industrial networking, with the ability to coordinate with others in order to determine problems and implement solutions.
• Ability to follow the site’s environmental health and safety policies.
• Ability to learn quickly and address issues as they arise during normal operations or during emergency conditions.
• Ability to work non-standard hours and differing rotations/shifts.
• Ability to work in varying outdoor temperature conditions, perform material handling (e.g., lifting/shifting), and work on platforms, ladders, and under raised floors.

Overview of the job

Do you want to lead marketing and commercial plans for one of our billion-dollar brands? The Senior Brand Manager (South Korea Market) identifies business opportunities and works with the multi-functional team to build cohesive commercial plans! You are expected to lead and collaborate with different subject matter experts to deliver end-to-end plans for Korea via qualifying communication ideas, adjusting portfolio pricing and identifying shopping barriers and opportunities.

Your Team

You and other Senior Brand Managers (each handling a brand/category) will report to the Brand Director for the Fabric and Home Care Business Unit. You will work extensively with colleagues from Consumer Market Knowledge, Sales, Communications, Finance etc.

What Success Looks Like

• Demonstrate positive relationship building skills in initial engagements with multi-functional teams
• Deliver Scorecard Business Targets, in line with the goals of the Business Unit
• Deliver Category growth, market penetration and gaining of New Users via Products Innovation Design, particularly in Korea
• Successful Design and Deployment of Marketing Toolkits for the Brand

Responsibilities of the Role

• Identify Korean consumers’ needs and wants for P&G’s products, and provide inputs to Research & Development and technical team to design the right package and formula to win with local consumers
• Lead consumer research to develop qualified brand concept, benefit and claims that addresses Korean consumers’ unmet needs
• Communicate with Korean local partners, stakeholders and suppliers to drive P&G business initiatives
• Lead creative agencies to develop communication ideas and execute TV copy production designed/customized for the cultural nuances of Korean consumers
• Develop initiatives fit-for-use toolkits (including copy, prints, digital i-banners, social & eCommerce contents, sampling trial toolkits, in-store activation and demos, etc.), and deploy/guide Korea delivery team for execution
• Coordinate with R&D, Consumer Research teams to qualify the product and package through various tests.
• Craft promotion/pricing strategy and customer/distributor trade terms with the local trade team
• Work with technical team to find the best solution of supply chain to manage the product cost within affordable level

Qualifications - External

• A college degree (Bachelor’s or Master’s, preferably with some business focus)
• 2+ years of relevant experience in Marketing
• Relevant experience in the FMCG industry
• Excellent forward-thinking, strategic and courageous leadership skills
• Strengths with strategic and analytical thinking
• An ability to drive innovation and brand growth
• Strong ability to communicate and team capabilities
• You are business proficient in the Korean language and possess strong market knowledge of South Korea as the role requires local consumer understanding to develop brand equity and marketing strategies for Korea Market

This role involves responsibilities related to administrative task of a Merchandiser and oversee inventory management processes.

Business Reports

• Generate sales, marketing and merchandising related reports regularly as stipulated by Company and Franchisor, as well as when required from time to time.
• Analyze sales and profit performance on regular basis by SKU, stock level monitoring, identify and monitor on slow moving / promotional & bestselling stocks.

Inventory – Shipment and Stock Management

• Maintain proper and accurate management of stocks status in all stores and system.
• Communicate and coordinate with 3rd party logistics on delivery and shipment PO, stock issues and discrepancy.
• Monitor logistics cost includes warehouse and delivery charges.
• Take charge of annual stock-take process.

Purchase Order and SKU Maintenance

• Creates Product Code and Purchase Order.
• Update images for Online and Promotion Price.
• Setup PWP and GWO Promotion code.
• Upload PO and follow-up with 3rd party logistics on shipment delivery status.
• Upload / Update prices data and other information by SKU from time to time.
• Assist Country Manager in procuring seasonal merchandise to ensure an optimal product mix is maintained across all stores consistently.

Others

• To implement and provide support to Country Manager and Marketing on tactical promotion planning.
• Assist Country Manager on any other sales and merchandising functions that may arise from time to time.
• Work closely with Marketing on new season launch, VM/window plan, and in-store display setup.

REQUIREMENTS:

• Minimum 1-2 years of retail work experience
• Knowledge of WMS is an added advantage
• Proficient in MS Excel
• Meticulous and multi-tasking
• Has good initiative and organizational skills
• Able to work independent, yet a team player to develop great relations with co-workers
• Good interpersonal, coordination & communication skills
• Able to communicate with Mandarin speaking frontline staff
• Require to travel to stores, primarily located in town, as and when necessary or periodically.

Core Duties and Responsibilities

• Maintaining and administering computer networks and related computing environments including systems software, applications software, hardware, and configurations.
• Perform hands-on installation and maintenance tasks on network components such as routers, switches, and cables.
• Monitor network activity and configure network systems using complex computer software.
• Performing disaster recovery operations and data backups when required.
• Protecting data, software, and hardware by coordinating, planning, and implementing network security measures.
• Troubleshooting, diagnosing, and resolving hardware, software, and other network and system problems.
• Replacing faulty network hardware components when required.
• Maintaining, configuring, and monitoring virus protection software and email applications.
• Monitoring network performance to determine if adjustments need to be made.
• Conferring with network users about solving existing system problems.
• Operating master consoles to monitor the performance of networks and computer systems.
• Coordinating computer network access and use.
• Designing, configuring, and testing networking software, computer hardware, and operating system software.

Knowledge, Skills and Attributes

• Strong understanding of network infrastructure and network hardware
• Ability to think through problems and visualize solutions
• Ability to implement, administer, and troubleshoot network infrastructure devices, including wireless access points, firewalls, routers, switches, controllers
• Knowledge of application and network infrastructure protocols
• Ability to create accurate network diagrams and documentation for design and planning network communication systems
• Good analytical and problem-solving skills

Additional Requirements

• Diploma in information technology or related field of study with a network engineering focus.
• Relevant certifications, CCNA (Must), ITIL
• Knowledge on MS Windows administration, FortiGate FW, Radius, Tacacs

Overview of the role

You will be accountable for business planning and commercial design finance for the region focused on Japan in Feminine Care business. You will take a lead to design mid / long term Japan Feminine Care business strategy and financial glidepath by collaborating with multi-functional team. You will manage short-term financial result delivery and financial reporting by providing explanation of variances and key performance drivers and consolidation of business results to senior management. You will own initiative financial design including new product design with innovation, pricing strategy, and promotion strategy. You will provide insightful analysis to support business unit leaders by identifying financial improvement opportunities.

Your team

This role reports to Finance Director and works closely with Marketing / Product Supply / Sales on financial planning, design work, and analysis.

How success looks like

• Demonstrate an ability to integrate the brand strategy, pricing, consumer position and profitability to recommend solutions to identify and deliver business growth opportunities.
• Seen as trusted finance manager to evaluate business issues, anticipant questions and demonstrate excellent analytical skills to optimize investment or handle risk.

Responsibilities of the role

• Provide financial leadership to key business partners in Regional Business Unit and Market Operations, across multi-functional teams.
• Lead financial analysis of initiative design, category plans, giving business recommendations to leaders.
• Lead in monthly regional financial forecast and support actual proofing.
• Lead in delivering high standards of stewardship in organisation and process workflow.

Qualifications

• 4-8 years of proven track record in managing financial forecast and budget management across a matrix organization with high level of agility.
• Experience in market in North East Asia region (i.e. Japan)
• Japanese language fluency preferred
• Detailed understanding of Generally Accepted Accounting Principles (GAAP).
• Ability to multi-task and work in a fast paced environment.
• Maturity, integrity, and high level of discretion are required.
• Independent worker and analytical problem solver with an ability to conduct research, data analysis and resolve problems.
• Strong presence with the ability to interact with Senior Leadership.
• Financial modelling expertise a plus.
• Experience in consumer goods industry would be beneficial.

On behalf of our client who is in the building equipment space, we are looking for Service Engineer with the following details :

Description

• To lead a team of technicians to maintain a portfolio of equipment in servicing, repair, modifications, and callback.
• Customers' point of contact in terms of feedback or request pertaining to equipment, resolving issues, reports, etc to achieve customer satisfaction.
• Monitor equipment performance and handle problematic lifts & escalators to achieve targets as well as continual improvement
• Plan, Implement, Monitor & Control the progress of chargeable, non-chargeable works, monthly servicing schedules, and callback roster
• Provide leadership, technical guidance, and support to subordinates.
• Obtain required materials/resources for works as required
• Prepare and conduct training for maintenance field staff with monitoring to ensure MIP/Best Practices are properly implemented
• Complete office administrative works as required.
• To communicate with inter-department staff for solutions & resolve issues
• Report and assist Section Head on operations.

Requirement

• Diploma in Mechanic/Electrical/Mechatronic Engineering
• With at least 2-3 years of experience in a supervisory /team lead role
• To be 24/7 operationally ready to attend to issues (rostered)

EA registration : 22C0971 | EA License : R21101298

JOB DESCRIPTION:

• Prepare Engineering product according to other department’s product / ITB / Licensor’s Specification.
• Produce Instrument datasheet according to ITB/ Client ‘s Specification/applicable Code & Standard, technical consideration
• Evaluate the Vendor’s quotation if it is technically complying with the given requirement or having deviation,
• Review the nozzle dimension of vessel/equipment that installing instrument is require adjustment.
• Review Vendor prints following the design that proposed in quotation stage, submission is accordance with schedule.
• Estimate cost in proposal stage by getting cost data from similar previous project or asking to vendor.
• Co-work and collaborate with other engineering disciplines to resolve any issue arising during project execution.
• Have training experience of Instrument engineering tool software
• Review 3D modeling and check any interference between instruments and other construction

JOB REQUIREMENT

• The degree of Master of Bachelor
• At least 5 - 10 years project experiences as I&C Engineer.
• Have experience of designing & procurement of field instrument
• Have experience of estimating construction bulk material
• Have experience of preparing C&I related document
• Able to communicate in English and Japanese with internal stakeholders.
• Have knowledge of using engineering software such as, Intergraph Smart plant, AVEVA
• Have knowledge of proper usage of material for construction or field instruments
• Have knowledge of Control system such as DCS, MMS, ESD
• Working experience in oversea company/site
• Have understanding of Specification/Code & Standard
• Proficient in written and spoken English and Jap to interact with internal stakeholders.

What the role is

The Hawker Centres Group (HCG) of NEA plays a lead role in managing and enhancing our hawker centres, so that they continue to be places where people from all walks of life can enjoy affordable food in a clean and hygienic environment. HCG also reviews and implements hawker-related policies that benefit both hawkers and the public. As a Asst Mgr/ Manager (Operations and Engagement) in HCG, you will be carrying out the following duties:

What you will be working on

1. Tenancy Management

• End-to-end management of stall tenancies, from ensuring stalls are in tenantable condition, onboarding of new stallholders to processing applications of transfers, assignments, joint operators and termination as well as appeals for rental waivers, rebates and remissions etc.

• Conducting tenancy inspections and enforcements to ensure compliance to relevant statutory and tenancy requirements.

• Managing arrears such as stall visits, serving of Notice-To-Quits, executing Writ of Seizure & Sales/Writ of Possession etc.

• Operationalising new policies and programs e.g. ensuring compliance of stallholders to Productive Hawker Centre initiative, management of Incubation Stall Program, Hawkers Development Program etc.

• Encouraging digitalisation and other programs/initiatives such as supply chain contingency to support and sustain Hawker Trade and maintaining Hawker Culture in the inscription on UNESCO Representative List of the Intangible Cultural Heritage of Humanity etc.

2. Cleaning & Facilities Management

• Ensuring high cleanliness and post-COVID hygiene standard, good maintenance and safe operation of the centres.

• Managing the facilities in MSE-owned Hawker Centres through centre level checks, covering facilities maintenance (preventive and routine maintenance), cyclical repairs and redecorations, ad-hoc improvement works to enhance patrons’ experience, incident management, general and toilet cleaning, table-cleaning management, and pest control.

• Conducting centre surveillance in HDB-owned Hawker Centres to flesh out areas of concerns to stakeholders such as Regional Offices, Town Councils and Hawkers Associations.

• Appointed by Designated Person (DP) as the Environmental Control Coordinator (ECC) for each hawker centre / wet market, to develop the ES programme in accordance with the ES standards and monitor its implementation on-site.

3. Feedback/Appeals Management & Stakeholders’ Engagement

• Managing feedback providers professionally to ensure that their feedback are being addressed or resolved promptly in accordance to NEA’s service standard.

• Regular engagement with stakeholders including stallholders, Merchants/Hawkers Association (MA/HA), Town Councils, other Agencies etc to implement initiatives and resolve operational issues related to Hawker Centres.

• Planning and implementing activities and programmes in Hawker Centres, such as fire drills & safety training and spring cleaning, and liaise closely with relevant authorities and stakeholders.

4. Emergency Preparedness and Contingency Management/Workplace Safety and Health (WSH)

• Implementation of safety measures and future proof markets/hawker centres to safeguard against extreme weather and/ or civil or national emergency.

• Adhering and identifying potential WSH risks and working with stakeholders to mitigate the risks.

• Facilitate Safety Walkabouts at markets/ hawker centres to drill the importance of safety into staff, stallholders and outsourced contractors.

5. Any other tasks as assigned.

What we are looking for

The job might be for you if possess the following qualities:

1. Organised and able to multi-task

2. Strong stakeholder management skills with outgoing and pleasant personality.

3. Independent, resourceful, meticulous and able to multi-task.

4. Proficient in Microsoft Office applications.

5. Team player with possession of leadership qualities.

6. Able to work after office hours and on weekends when required.

7. As part of the shortlisting process for this role, you may be required to complete a medical declaration and/or undergo further assessment.

To apply, please proceed to https://sggovterp.wd102.myworkdayjobs.com/PublicServiceCareers/job/NEA-HBD-HUB/Assistant-Manager-Manager--Operations-and-Engagement-_JR-10000026693-1

Responsibilities

Enable production Metro/RDA needs

• Provide first level of support for engineering requests, recipe maintenance, tool recovery and basic troubleshooting of tool issues
• Collaborate with Manufacturing, Equipment and Process Engineering teams to set daily priorities and enable efficient communication.
• Provide support and liaise with tool owners and vendors for long term down equipment, tool installation, relocation and upgrades, Preventive Maintenance (PM) and/or Corrective Maintenance (CM) schedule on tools
• Ensure all Special Work Requests (SWRs) are processed correctly and in a timely manner
• Collaborate with Production, Equipment and Process Engineering teams to optimize tool maintenance schedules and utilization
• Partner with Process, Equipment Engineering and capacity teams to determine sampling strategy to meet Production, Process Control and Quality requirement

Monitor and ensure all Metro/RDA tool meet measurement and inspection standards.

• Set up tool qualification criteria, implement, monitoring through Statistical Process Control (SPC).
• Make decisions on how to address tools and products that are out of control for established SPC rules for both process and defect related issues
• Develop and manage projects designed to reduce cost, reduce tool measurement variability, improve availability, and find solutions to ongoing problems
• Partner with Process, Equipment Owners and vendors for equipment upgrades/enhancements to improve tool performance
• Perform periodic assessment, tool-to-tool matching & GR&R, etc. to ensure tool measurement accuracy.

Evaluation and enable next generation tool to close metrology gaps.

• Partner with the metrology/inspection tool vendors to develop new hardware, software, and technologies.
• Work with Manufacturing, Process and Equipment team on tool/product requirements.
• Task 3 - Perform tool evaluation and buy-off.

Seek and drive methodology breakthrough to improve efficiency in metro/rda function.

• Drive process improvement through new recipe creation that helps to provide accurate and faster feedback to the line, thereby improving the confidence level of the product.

Requirements

• Bachelor's/ Masters in Engineering (Mechanical / Electronics would be advantageous
• Keen to pursue a career in the semiconductor industry

Interested applicants are invited to apply directly at the NUS Career Portal.

Your application will be processed only if you apply via NUS Career Portal.

We regret that only shortlisted candidates will be notified.

Overview

We are looking for people with a strong background in Computation & data infrastructure and/or building data systems. They must be comfortable working with a range of stakeholders and functional teams including Students, Faculty, IT and External Collaborators. The right candidate will have a passion for working with numerous small research teams to assist in managing their Infrastructure needs and advise them on best practices to engineer their projects efficiently.

Responsibilities

INFRASTUCTURE MANAGEMENT (50%):
• Maintain servers, including file , web , proxy servers, including security patches.
• Allocation of compute / storage resources as needed.
• Analyse institute infrastructure needs to implement for services providing improvements to systems.
• Management of the Institute Website.
• Liaise with Global IT teams to ensure compliance to their policies and be a single point of contact for the institute for troubleshooting.
• Manage recording and streaming systems during regular seminars / Conferences and workshops.

DATA ENGINEERING (25%):
• Support research teams with advice on efficient Data Engineering practices including automation of data pipelines, data cleansing, integrity checks etc.
• Develop processes to handle remote data access / management in compliance with security best practices (and appropriate policies)
• Assess the effectiveness and accuracy of new data sources and data gathering techniques.

SYSTEM DEVELOPMENT (25%):
• Create APIs for integrate data source into functional blocks of software & services.
• Create APIs for downstream usage of Data models.
• Coordinate with different functional teams to implement models and monitor outcome
• Promote security best practices for application development

Requirements

• Bachelor degree in Computer Science, Operations Research, Engineering with more than 3 years relevant experience
• Experience in maintaining virtualised server infrastructure and creative problem solving within large IT infrastructure.
• Deep understanding of statistical analysis, data mining or machine learning
• Practical experience in working with large structured and unstructured data set
• Ability to think analytically and deliver results that drive business decision making
• Team player to build strong partnerships
• Have competency in one or more of the programming languages or tools: Python, R, Spark
• Experience in security engineering will be a plus
• Experience or knowledge in AWS/GCP environment will be a plus
• Prepared to take on new challenges and ad-hoc requests that need a quick turn-around
• Excellent written and verbal communication skills for coordinating across teams.

OVERVIEW OF THE ROLE

As a Brand Director, you will be responsible for making sure that our brands win with consumers, retailers and in the market to grow sales, share and equity. We win with consumers' preferences in each of the following areas:

1. When they learn about our product

2. When they choose to buy the product

3. When they use the product at home

We are looking for the world's best brand builders who follow one simple concept: "Consumer is boss"

Working in Brand Management at Procter & Gamble means you are a total business owner, maintaining a holistic leadership responsibility on brands. We need someone who is dedicated and who can guide the vision and strategy behind a brand(s) by developing marketing plans and driving innovation. Our Brand Leaders work regularly across multi-disciplinary partners to identify consumer, shopper, and customer insights and execute marketing tactics that will continue to grow your brand profitably.

Together, we'll continue to create leading brand experiences and make a difference for nearly 5 billion consumers every single day.

WHAT SUCCESS LOOKS LIKE

As a Brand Director, you will have opportunity to work on creating winning strategies for brands, driving the business results. You will lead multi-disciplinary teams (including Sales, Finance, Product Supply, Advertising, and Media Agencies) to collaborate and develop top winning strategies for success.

You will lead a mix of Marketing and Brand Management projects enabling you to show the breadth and depth of your strategic and integrative thinking. As a Brand Leader you own taking insights from

the data, to set the direction for brand growth.

RESPONSIBILITIES

• Brand equity development
• Business driver delivery
• Consumer understanding
• Data analytics
• Developing partnerships
• Financial management
• Opportunity identification & innovation
• Coaching and training the organization

QUALIFICATIONS

• MBA or Degree qualified with a relevant major (Business Administration, Advertising, Marketing, Digital Marketing, Communication)
• At least 10 years of prior experience in the following areas: Brand Management, brand equity development, business driver delivery, financial management, and opportunity identification & innovation
• At least 5 years' experience in FMCG industry
• Has P&L experience on running a large (>$200-250 million) business
• Must have prior work experience in Beauty care
• Should have worked across multiple APAC Markets
• Must have experience managing design and media agencies
• Excellent forward-thinking, strategic and courageous leadership skills

ABOUT US

We produce globally recognized brands and we grow the best business leaders in the industry. With a portfolio of trusted brands as diverse as ours, it is paramount our leaders are able to lead with courage the vast array of brands, categories and functions. We serve consumers around the world with one of the strongest portfolios of trusted, quality, leadership brands, including Always®, Ariel®, Gillette®, Head & Shoulders®, Herbal Essences®, Oral-B®, Pampers®, Pantene®, Tampax® and more. Our community includes operations in approximately 70 countries worldwide.

Visit http://www.pg.com to know more.

Our consumers are diverse and our talents - internally - mirror this diversity to best serve it. That is why we’re committed to building a winning culture based on Inclusion and our ideal candidate is passionate about the same principle: you will join our daily effort of being “in touch” so we craft brands and products to improve the lives of the world’s consumers now and in the future. We want you to inspire us with your unrivaled ideas.

We are committed to providing equal opportunities in employment. We do not discriminate against individuals on the basis of race, color, gender, age, national origin, religion, sexual orientation, gender identity or expression, marital status, citizenship, disability, veteran status, HIV/AIDS status, or any other legally protected factor.

Job Description:

The position, located in Singapore, is an exciting opportunity to be part of an Innovative & Dynamic team, within the Imaging Validation Team, part of the Imaging Division, working on different worldwide leading technology image sensors targeting various customers and markets (Consumer, Industrial, Automotive).

As a Functional Validation Engineer, you would be involved in the validation of the various products of the division. The objective of the job is to ensure the functional performances of the product is aligned with the specification. Two kinds of platforms will be used: FPGA prototyping platform in a first step, silicon platform with final product in a second step. You will be supported by a large team of technical experts in validation, Optic, Electronic, Mechanics, software.

As a Functional Validation Engineer, you:

• Will be responsible of validation environment development: Test suites definition, Laboratory test bench, test development, validation automation, documentation.
• Will be in charge of the analysis and the solution of technical challenges.
• Will support customer for the integration of the product in customer platform
• Will collaborate with different Product Development Teams: IC Design, IC Architecture & Algo, Embedded Software/Firmware
• Will collaborate with application team in order to provide best solution for the customer

Profile:

- Bachelors’ degree in Electrical Engineering or similar discipline.

- At least, 6 years of experience, in Validation, Testing or Electronic product development.

- Mandatory skills:

• Analog or Digital Electronic Knowledge
• Programming skills in Object Oriented Software Language (Python preferred)
• Data Base management tools (git, SVN)
• Strong verbal and written communication skills in English

- Softskills required:

• Engage and collaborate with cross-functional teams
• Good level of autonomy, methodology and rigor
• Ability to work in a multi-cultural environment.

- Minimum of 3 years’ experience in one of the following area:

• Electronic Component verification, validation, or industrial test
• Electronic System Development
• Microcontroller Firmware development

- Additional optional skills:

• Electronic System experience
• Thorough familiarity with lab measurement techniques and test equipment (Signal Generator, Oscilloscope, …)
• Standard electronic communication protocols knowledge: I2C, I 3C, MIPI CSI2
• Automatization tools experience (Jenkins, gerrit)
• Knowledge in CMOS image sensors and in image data processing

We are looking for a candidate for high-speed analog and mixed-signal integrated circuit design. This candidate will contribute to the development of high-speed silicon photonics transceiver for next generation wireline communication system. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications.
• Design and tapeout ICs which include state-of-the-art circuit blocks e.g. analog-to-digital converter, equalizers (CTLE, DFE) as part of the high-speed data link system.
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electrical Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog and mixed-signal IC design methodologies and successful tapeout experience
• Familiar with analog and mixed-signal IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven

Key Responsibilities:

• Deliver hands-on technical support at Levels 2 and 3, actively resolving complex issues and ensuring a swift resolution to minimize downtime
• Serve as a go-to resource for the team, providing expert assistance in troubleshooting and decision-making for escalated technical challenges
• Stay informed about technological advancements and evaluate their applicability to the organization
• Engage with vendors and external technical resources to facilitate swift issues resolution and keep abreast of product updates and enhancement
• Lead incident response efforts, conducting thorough analyses of security incidents and devising preventative strategies for future occurrences
• Conduct regular security audits, assess compliance with industry standards and regulations, and implement necessary improvements maintain a secure environment
• Stay current with emerging threats and vulnerabilities, conducts vulnerability assessments, and implement effective mitigation strategies
• Collaborate with cross-functional teams to understand business needs and ensure technical solutions align with organizational goals
• Establish and maintain effective communication channels with stakeholders
• Ability to plan, execute, and delivery technical projects, ensuring they meet quality standards and deadline
• Collaborate with stakeholders to define project scope, goals, and deliverables

Qualifications & Skills:

• Bachelor’s degree in Informative Technology or Computer Engineering
• At least 5 years of hands-on experience in Technology
• Minimum have MSCE & CCNA or relevant System and Networking certifications
• Security+, CISSP, CISA, or relevant security certifications and highly preferred
• In-depth knowledge of Microsoft Windows and Linux OS for Server and Client
• In-depth knowledge of Applications like Web Server (IIS, Apache, etc) and Database (MySQL, MS SQL, Oracle DB, etc)
• In-depth knowledge of Networking, Firewalls, and Cybersecurity
• Familiar with security standards and frameworks such as NIST, ISO27001, CIS Benchmark, and OWASP
• Problem-solving and decision-making skills and ability to thrive in a fast-paced and dynamic environment
• Good documentation, especially in Risk Assessment, FAT, SAT, Checklist and Method of Statement

Job Responsibilities:

• In charge of overseeing the coordination of tasks related to Pre-Delivery Inspections (PDI)
• Maintain proper organisation of all PDI documentation, including Job cards, Invoices, warranty claims, creation of purchase orders, and Good Return Notes (GRNs)
• Assign and supervise PDI work carried out by mechanics/technicians in the workshop
• Collaborate with external contractors to ensure necessary PDI work is completed
• Conduct thorough quality checks on PDI work conducted by technicians and contractors
• Ensure that new or pre-owned car finishes meet the highest standards of quality, meeting customer expectations and ensuring customer satisfaction is achieved upon delivery of the car to the customer
• Offer administrative and technical assistance to sales staff during the delivery process
• Address any outstanding PDI work that may be required after delivery
• Deliver exceptional customer service by promptly and professionally handling inquiries and resolving issues for clients
• Assist when required with the day-to-day operations, including scheduling and coordinating motor vehicle maintenance and repairs
• Maintain a clean and organised work environment, ensuring compliance with safety and maintenance standards
• Ensure timely and accurate completion of administrative tasks, such as data entry, filing, and record-keeping
• Collaborate with team members to achieve operational goals and targets

Job Requirements:

• Minimum Nitec in Automotive Technology or its equivalent
• Proven experience in customer service and operations, preferably in the automotive industry
• Strong time management skills, with the ability to prioritise tasks and meet deadlines
• Excellent teamwork and communication skills, with the ability to work effectively with colleagues and clients
• Knowledge of motor vehicle maintenance and repair procedures
• Working knowledge of vehicle diagnostic systems and methods
• Ability to handle various tools and equipment
• Ability to adapt to a fast-paced and dynamic work environment
• Singapore Class 3 Driving Licence

About Us

Dyson is passionate about design and our spaces are no exception. The Global Estates team is here to ensure that our spaces nurture, facilitate and inspire the talents that propel the business forward. This role will work closely with corporate real estate professionals – planners, strategists, designers, engineers, project managers and key stakeholders to help deliver solutions that work exceptionally.

About The Role

• Represent the Estates Engineering team in capital projects.
• Provide engineering guidance and support for all building services and capital projects.
• Review designs and submittals from consultants and contractors e.g. Material and equipment submissions, design calculations for system capacity sizing, construction layout drawings, testing & commissioning method of statements etc.
• Ensure all projects meet Dyson building services minimum standards specification (MSS); established international and country specific codes, standards and regulatory requirements; best-known methods; and conform to approved construction drawings
• Ensure that projects are delivered in time and on budget.
• Work closely with Dyson key stakeholders to ensure projects are delivered according to their specifications and requirements. Interrogate feasibility and value of project requests.
• Participate and contribute in continuous improvement programs and update established MSS documentation as needed.
• Be the subject matter expert for infrastructure improvements and refurbishments in line with business commitments and sustainability targets.

About You (Essential)

• Facilities/Real estate experience in Building Services/M&E Engineering is a must.
• Electrical Engineering or related Building Services Engineering Degree from a recognized institution.
• Minimum 7 years’ experience with strong Electrical Engineering background in Building M&E systems.
• Must have working experience and good knowledge of Electrical HV/LV systems e.g. Gensets, Transformers, Switchgears, UPS, Lighting etc. Must be conversant with regulatory codes and standards.
• Experience with other engineering disciplines such as ACMV, Hydraulics, CDA, BMS, Fire Protection, Sustainability, Acoustics & Process Utilities systems.
• Experience with Office, Labs and Manufacturing facilities.
• Proficient working in Microsoft Excel, Word, Powerpoint and internet platforms.
• Highly organised and efficient.
• Ability to work with people at different levels. High EQ and interest in meeting people of different levels.
• Strong team player and able to work independently.
• Proactive, diligent, committed and resourceful.
• Strong and Good in both oral and written communication skills.

• Marine Electronics & Telecommunication
• Basic $3000 - $3500
• 5 days (8.30am – 5.30pm)
• Location: Pandan Loop

Responsibilities

• Work together with the clients, either at our office or client’s locations, to understand their needs and translate them into an actionable plan with the team.
• Work closely and communicate effectively with project manager, and other project team members to create and deliver quality solutions for the clients.
• Perform quality control work, taking into considerations of the budget, schedule, and plans.
• Keep track of project status and provide regular reports.
• Assure all the deadlines are being met.

Requirements

• Min Diploma/ Degree in Engineering or other relevant
• No experience are also welcome

For consideration, kindly submit your CV by clicking “APPLY Now”

**Only shortlisted candidate would be notified**

EA Reg. No: R23114214 | Chloe Tan

Job Description & Requirements

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

i) Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.

ii) Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.

iii) Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.

iv) For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.

v) Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.

vi) Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.

vii) Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirement

- Degree in Civil Engineering/ M&E Engineering

- Mininum 2 - 5 years' experience working in construction industry

Responsibilities

• Responsible for physical design and development activities of MediaTek Ghz, AI processors and neural network DSP
• Involve in activities encompass physical design and analysis of complex and timing-critical AI processors and neural network DSP
  Technical disciplines include synthesis, floor-planning, place and route, RC extraction, timing, power optimization and physical verification
• Work closely with MediaTek colleagues in Taiwan and Singapore in implementation methodology co-development and flow deployment

Requirement

• Bachelor/Masters Degree in Electrical/Computer Engineering
• Min 2 years of high-speed CPU/GPU/DSP Subsystem RTL Integration experience or IP/Block/SoC Design experience (Candidate with less than 5 years of relevant experience will be considered for junior position)
• Experience with Synopsys ICC (preferred) or Cadence tools from netlists to GDS
• Experience in graphics processor implementation/power reduction flows and methodology from RTL to GDS (including synthesis, floor-planning, placement, CTS, routing, timing optimization, physical verification)
• Knowledge of high-speed/low power IP and custom circuit design
• Experience with power noise and reliability tools such as Redhawk and Voltus
• Good communication and scripting skills

We are looking for a candidate for high-speed analog integrated circuit design. This candidate will contribute to the development of high linearity silicon photonics modulators for 6G and beyond communication systems. This requires the candidate to work closely with the optics team on the electro/optical co-design as well as system integration and validation.

• Perform system level analysis and design, to derive circuit-level design specifications
• Design and tapeout ICs which include state-of-the-art circuit blocks, e.g. wideband linear low-noise amplifier and transimpedance amplifier with a focus on circuits interfacing with silicon photonics elements
• Work together with team to investigate novel circuit/system solutions to create new inventions

Job Requirements

• Qualification & Field of Study: Minimum Bachelor’s degree and above in Electronic Engineering
• Min. Years of Experience: Minimum 2-years of transistor level analog circuit design experience

Other Requirements (e.g. Skills, Competencies)

• Good understanding of CMOS analog IC design methodologies and successful tapeout experience
• Familiar with analog IC design and verification flow
• Industry experience would be a plus
• Familiar with the IC test equipment such as oscilloscope, spectrum analyzer, etc.
• Good communication skills (both written and spoken)
• Able to generate high quality scientific publications and patents
• Team player, quick learner and self-driven